To access the/sdcard-ext applications that allow only access /sdcard or/mnt/sdcard

Similar Questions

• Recently, I installed Wubi, an application that allowed me to try out Ubuntu while still maintaining my installation of Windows XP. Sience I've not unhooked the Ubuntu Microphone stopped recording

  Recently, I installed Wubi, an application that allowed me to try out Ubuntu while still maintaining my installation of Windows XP. Sience I've not unhooked the Ubuntu Microphone stopped recording

  I tried to watch http://support.microsoft.com/ph/1173 and have searched to my problem on this page, but I came up with results relating to Windows 95.

  I checked the "recording control" and other kinds of options in my 'Control Panel '. Yet I came empty, any suggestions in this area of the Panel control, or elesewhere would be greatly appreciated. Thank you

  Hello Purplehaze412,

  Thank you for your message.  What kind of microphone do you have?  It's USB or it plug into the microphone as the speakers or headphones port?
  If it uses the headphone:
  Click "Start" > click on "Control Panel" > double-click "sounds and Audio devices".
  Select the tab "Audio".
  Under "Sound recording" you can change the default device?
  If it is USB, try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Select "Device Manager".
  Double-click "USB" - remove your device microphone, remove the microphone, then plug it back to recognize.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a way to color the correct main items that allows me to export/save the results as a mp4?

  Is there a way to color the correct main items that allows me to export/save the results as a mp4?  I shot images that I need to spend on another editor for editing, but I want to fix the images colors before putting to sea.  I know you can color correct elements, but is it possible to export the clips to the original position of the source for mp4?  I tried to export a clip using H.264 corresponds to the source, but the result is a half the size of the original file. Your help is appreciated!

  You realize that what you do is a generational loss.  Compression of the images already well compressed!... as well as many other works that used saw the final cut.

  Increase the flow of your export to preserve quality as much as possible.

• I bought the version of Acrobat that allows you to edit PDF files.  I currently pay $15 / month.  I bought a new computer and downloaded the free version of Acrobat.  How to install the version that I pay $15 / month?

  I bought the version of Acrobat that allows you to edit PDF files.  I currently pay $15 / month.  I bought a new computer and downloaded the free version of Acrobat.  How to install the version that I pay $15 / month?

  Launch Acrobat, on the first window, click on "license this software" and enter your Adobe ID, associated with the subscription and password.

• Build a package only for the desktop application that allows applications to install?

  My organization uses the license serial number. I thought that if I built a set including the designer Cloud Desktop app, using a serial number which grants access to all applications, that the user would be able to install these applications on request. But after installation, when you open the creative Cloud application, it says 'Try' next to all applications. How can I get what I want?

  Thanks for the reply. It's already a package serialized, as I mentioned. But your suggestion is largely correct. When you create a package, it seems that even if you use a serial number that covers several applications, the resulting package creates only licenses for the applications in the package.

  Here is a procedure that seems especially to accomplish what I want:

  1. Using Packager, build a serialized package. It should include the creative Cloud Desktop application and allow admin users install updates. Don't add any application; It will be built using only the "basic elements".
  2. Using Packager, generate a license file with the serial number that covers the applications users need access to.
  3. On the target computer, install the software package.
  4. On the target computer, run the program AdobeSeralization of the license file package (must have the file prov.xml always in the same directory for easier use).

  When you use Creative Cloud Desktop, it will still say 'Try' next to all applications. When you actually install and run applications, they are fully licensed and not in test mode. This applies only to applications that are covered by the license file, of course.

• What is 'Quickactionbox' appliction? He is constantly provide in the list of applications that are running in the Task Manager on several occasions.

  

  Here you can see the problem. What is this thing?

  Hi Benjamin,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem some application named QuickActionBox is running and showing in the Task Manager.

  If you think that this application is not known to you and you think that's not important, then you can uninstall it in the list of programs. But before you uninstall this application, I recommend to create a system restore point and try to uninstall the application so that if this application is important, then you can come back to this point again.

  To create restore point, you can see the article mentioned below.

  A restore point is a representation of a stored state of your computer's system files. You can use a restore point to restore system files from your computer to an earlier point in time. Restore points are created automatically by the restore of the system each week and when System Restore detects the beginning of a change to your computer, for example when you install a program or a driver.

  Create a restore point

  You can uninstall a program from your computer if you no longer use, or if you want to free up space on your hard drive. You can use the programs and features to uninstall programs or to change the configuration of the program by adding or removing certain options.

  Uninstall or change a program

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Accidents to the list of programs that allows, under Parental control

  I'm running Windows 7 Pro. When I'm trying to set up parental controls on a user, I get an Explorer error that is reported and terminates the process.  Can not put in place. Specifically what happens under Parental controls, allow and block specific programs, can only use the programs I allow it, he seems to try to generate a list when it crashes.  Y at - it a patch known or is it possible to correct by repair of the system disk.

  Thanks for the reply.  I finally determined with the help of Microsoft that my installation is corrupted some how.  I reloaded the OS and the problem disappeared.

• Application that shows only the dialog boxes

  Hello

  I would like to write an application that typically runs in the background, but in certain conditions will need to display a dialog box. The dialog box is modal and on a separate thread.

  My question is whether it is possible to have this application that does not show a display main but just the dialog boxes when necessary.

  Is UiApplication the right approach? Can I have this app slot with invisible main screen or no screen at all but still be able to display dialogs?

  Best regards

  Orlin

  Apologies, one thing I forgot to say.  When you use GlobalScreens, you will notice that you can't push a Modal screen.  If you want to get feedback from the user and act accordingly, you will have to manage this feature using a DialogClosedListener.

• y at - it an application that allows computers to play xbox 360 discs

  Xbox 360 consoles can break if they circulate around a lot and they could move around in the back of a car or truck on sharp corners. Vancouver Island has many of them. The worst highway on that I was is 4 between Port Alberni and Ucluelet/Tofino, it seems that there is a sharp corner to each part of the cliff of the road. Wearing just a xbox 360 to a another room can have effects long term on this subject. Game xbox 360 disks on laptops can reduce risk until a portable xbox system is available.

  Nope.

• I:\ is not accessible .__Incorrect function___and in the other CD as__Blank that allowing open, DVD RAM, changing to CD player by inserting a correct DVD.

  System configuration: Windows XP with SP3 (Original) and all other Microsoft updates. An engraver of DVD from LG (HL - DT - ST DVDRAM) - SATA & Samsung DVD writer (TSSTcorp CDDVDW SH-S222A SCSI) - PATA later do IE August 2010 & September 2010 with the latest firmware, Nero 8.

  On a previously written DVD Insert, complete correct IE fully functional in other dvd burners / rom, DVD RAM icon changes to CD with two blank CD showing player one and not accessible with the message above in the other happening too the DVD-RAM to CD drive.

  Not understand, reported the problem to the company service centers assuming failed drive to be replaced during the warranty period. Provided with other drives of different model but unfortunately same case again. Searched the Internet, consulted and I have tried all sorts of remedies, but without success. Although all CDs, written or purchased fully functional, only previously written DVD.

  Then tried the solution of Microsoft Solution Center as "Mats_Run.dvd". Same here as that 'Please insert media readable by the CD/DVD drive [I:].  Windows tried to open the CD/DVD drive for you. "and finally as ' media in the CD / DVD drive is not readable (TSSTcorp CDDVDW SH - S222A SCSI CdRom Device' with the status"not set".)

  Wasted a lot of money and time behind this problem try this this, but without success. So looking forward to you for that my major problem not identified as an emergency like with me for needing to use these data. Again, no problem at all on my side of the machine and quality DVD that are required to access. And kindly, as soon as possible. Thank you.

  Lately, just after the announcement of this problem, insert a blank DVD to check DVD writing. And yet even ONCE - DVD RAM changing to CD player in both and in the above statement PATA and SATA a blank CD. Sense DVD is not reading as well as writing. Please add this also.

  Hi Sreeparno Baksi,

  Try the methods below:

  Method 1:

  Uninstall Nero 8 on your computer. You can check the link that help you with the steps to uninstall program to add or remove function below: how to change or remove a program in Windows XP: http://support.microsoft.com/kb/307895

  Method 2:

  Delete manually the filter upper and lower filters from the registry editor. See: (Section: fix it myself: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs:http://support.microsoft.com/kb/982116 )

  See also the link below: Advanced Troubleshooting for issues that occur when you are installing a new CD or DVD drive in Windows XP: http://support.microsoft.com/kb/314096

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Vault to Oracle set up rules to restrict the user and the type of application that can connect

  Oracle 11 g 2 (11.2.0.4.3)

  RHEL 6

  Hi all

  We are experiencing a few problems to configure the following condition:

  Users A, B, and C will not be able to connect via SQLPLUS.

  So I took note of the political examples on how to Set Up database Vault (Doc ID 972477.1() -section restrict access to the database (sqlplus) unwanted tools:

  However, it doesn't evaluate the rule in the rule set correctly. The rule set is as follows:

  DVF. F$ MODULE! = ' SQL * MORE AND DVF. F$ SESSION_USER NOT IN ("USERA", "USERB", "USERC")

  This rule allows all users to connect except those defined in the rule. And it applies also to the developer SQL (and all other connections). If I change to be 'IN' he also allows users in the list, but no one else. In addition, somewhere I think it evaluates it as "OR" rather than "AND". What I want to do is:

  IF user IN ("USERA", "USERB", "USERC") AND SYS_CONTEXT ('USERENV', 'MODULE') = ' SQL * MORE

  SO, do not allow the user to connect.

  Note: The factor (MODULE) has been created by me and her expression is SYS_CONTEXT('USERENV','MODULE')

  Any help on this would be greatly appreciated.

  I tested these rules and they work:

  (1) ((upper (sys_context ('userenv', 'module')) like '%%') and (not in sys_context ('userenv', 'session_user') ('A', 'B'))) or ((upper (sys_context ('userenv', 'module')) like ' % %') and DEVELOPER (not in sys_context ('userenv', 'session_user') ('A', 'B'))))

  (2) ((upper (sys_context ('userenv', 'module')) not like ' %PLUS%')) or ((upper (sys_context ('userenv', 'module')) not like ' % DEVELOPER %'))))))

  I'm blocking users A and B to connect from SQL * more and SQL Developer

  -set the rule defined for all THE TRUE evaluation

• Why the system keep application that I have download Flash 8.0.0?

  Mac G5. Final Tiger.

  Sometimes I listen to audio online from various sources without problem.

  Sometimes when I try to do, I get a message (or a button) for download Flash 8.0.0. I did it several times. Once the application is installed (I know that it is), I can click on this audio file, and up comes the same message/button again to d/l Flash 8.0.0.

  If I try to find the Flash on my system, it's somehow not not clear to me what I found.

  Let me try it right now and see what happens to the top (I'll summarize):

  Spotlight using my "Top Hit" say 'Adobe Flash Player install Manager.' When I open it gives me the choice to leave or uninstall, but no version number. And if Flash 8 or a later version is indeed installed, how do I know where he is? (It may indeed be a plugin somewhere - but-?) I also here and there on the records marked the Flash 6 or 7. An example in/Applications/Adobe Extension Manager CS4 / Samples. One more in my Library/Preferences/Macromedia folder (even if I don't use some Macromedia applications).

  Now, let me check my plug-ins for Safari (latest version): there is a Shockwave Flash. There's this: "verified download Plugin - the 'VerifiedDownloadPlugin.plugin' file, but no additional information. I also click to Flash 1.5.5.

  What is my best course of action here? And I thank you.

  You can see your version of fp here: http://kb2.adobe.com/cps/155/tn_15507.html

  in the future, ignore a message recommending that you download fp 8.  This is an old version and probably the creator of this flash player detector is using obsolete code giving you the wrong information.

• I need the circular activity icon that allows you to be in the classic toolbar.

  Hi, I, m the need for points circular icon that notifies you that an activity is underway. Please let me know if I can get it back. Thank you very much.

  You want the back throbber. In my view, that it has been deleted. You can get a replacement of:

  • https://addons.Mozilla.org/en-us/Firefox/addon/throbber-restored/

• I have somehow added a splitter to my browser screen. When I open firefox there are 2 screens with separate scroll bars. I do not use the add on feature that allows the separation of the screen. I can't find a command to remove the 2nd screen.

  The left side of my browser's screen has a screen separate with its own scroll bar. I can use the cursor to draw this screen to halfway to the right. It has a separate web page as the main window. I can't find a command to remove it. I had a yahoo toolbar, I thought that may have been involved.

  You can open a Web site in the sidebar.

  Opening in the sidebar is the default value for the bookmarks created via a link or a button on a Web site.
  
  You can view the properties of a bookmark using the context menu in the side bar (Ctrl + B; Cmd + B on Mac).
  
  In the Bookmark Manager (Bookmarks > show all bookmarks) you can click on the button more in the lower details pane on the right.
  
  Make sure "Load this bookmark in the sidebar" is not selected.

• The icon in the lower right corner that allows me to mute / adjust the sound disappeared. How can I get it back?

  I use VISTA.

  Next time you post a question please specify what operting system you use first.

  Steps to fix the same problem may differ in different of operaring systems.

  For Vista, use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can try a method first, but most of the time, the box to check the Volume would be grayed out (unclickable).

  Otherwise scroll down to three method...

  2. for the Volume icon.

  To activate the Volume - icon Enable_Volume.reg< click="" to="">
  and follow the instructions from #5 to #9.

  Make sure that you restart the computer to complete the process.

  For Windows 7, use this tutorial:

  http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

  Scroll down to two methods:

  9. to activate the Volume icon

  and follow the instructions from #11 to #15.

  Make sure that you restart the computer to complete the process.