To access the second rectangle to layer with extendscript
Super noob question: I am trying to create a shape with two rectangles layer, but can not find a way to access / add properties (change the size, fill, stroke, etc.) to the second rectangle.
var curComp = app.project.activeItem; var curCompHeight = curComp.height; var curCompWidth = curComp.width; var rulerLayer = curComp.layers.addShape(); var contents = rulerLayer.property("ADBE Root Vectors Group"); contents.addProperty("ADBE Vector Shape - Rect"); contents.addProperty("ADBE Vector Shape - Rect"); contents.property("ADBE Vector Shape - Rect")("ADBE Vector Rect Size").setValue([2,curCompHeight]); contents(2).property("ADBE Vector Shape - Rect")("ADBE Vector Rect Size").setValue([2,curCompHeight]);
Line 10 throws an error "null is not an object. Any help would be greatly appreciated!
In line 10, either use propertyIndex (2) or remove ("ADBE vector shape - Rect"), but not both, otherwise, it is ready as
content
(2) / / the second rectangle
. Property ("ADBE Vector - Rect-shape") / / there is no so content (2) .property ("ADBE Vector - Rect-shape") is null
("ADBE vector Rect size") / / property ("ADBE vector Rect size") NULL: error
In fact, you can use one of:
happy. Property (2) .property ("ADBE vector Rect Size").setValue([2,curCompHeight]);
Happy (2) ("ADBE vector Rect Size").setValue([2,curCompHeight]);
Happy (2). Size.SetValue([2,curCompHeight]);
(In some situations, the latter can be misleading however)
There is a script (rd: Gimme Prop Path) here redefinery.com: rd: script
This explains a lot about the paths of properties
Xavier.
Tags: After Effects
Similar Questions
-
Just upgraded to El Capitan and cannot access the calendar. It opens with a message 'Moving calendars to the server.
I cannot access all features and can be closed only by using force quit.
Please stop calendar and also the application of reminders, runs. Force quit if necessary.
Back up all data.
If you synchronize some of your calendars, or reminders with iCloud, then in the iCloud preferences window, uncheck that marked calendars and reminders. You will be prompted to confirm that you want to remove your iCloud calendars and reminders of the computer. They will always be in iCloud. Re-check the boxes.
If you synchronize agendas or reminders with another network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.
Launch schedule and see if there is an improvement.
-
Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.
Turn off the computer.
Wait 10 minutes.
Start the computer.
The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.
Launch the prompt with administrator privileges.
Press the Windows key + X
Click prompt (Admin)
Type the following command:
Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN
Press enter on your keyboard
Exit command prompt
Restart
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times and try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Do a clean boot, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
- If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
My provider has modernized and forces me to change the server settings. I did this successfully on a desktop computer and now I want to do this on the second and the third office where I want my accounts available e-mail.
When I try, I get a window of the wizard account saying "an account with that name already exists. Please enter a different account name. "And I'm prevented from doing the settings made on the second Desktop server.
How do I get around this?
Thank you,
DJBrewsterOpen the configuration editor and search for entries with this name
There should be two entries with mail.server.serverXX.name (where XX is a number.) change on them and try and change the setting again.
-
How to access the Recovery Console for "fixmbr" with Toshiba Recovery DVD?
Hello
I searched but did not find all related messages, I start a new thread.
I have to fix the MBR and normally you can do this via the recovery XP and then Console "fixmbr". As you may know Toshiba Recovery DVD know only in a sense - the way hard "format hdd or first partition".
* How can I fix the MBR on the standard MBR MS when no original XP installation disk/DVD is usable - Toshiba Recovery DVD are available
tried the XP CD from my office... but you know... it doesn´t work.Additional information:
I deleted my HARD disk partition table and cannot access the first partition to a partition that would be very useful that I could try to recover this partition later - but I can't. My A200 SatPro also comes without floppy disk but can boot from USB.Thanks for any answer!
Best regards
AndreasPost edited by: alphasig - updated and corrected typos in page
Yes, the thing with the recovery console fixmbr should do the trick, and I am a bit surprised that your XP from your other computer disk does not work.
You are not able to boot from it, or what is the exact problem? Because you will not be able to repair with your recovery disk.
Advise you to try another original XP disc, may borrow from a friend and try again. You may need to change the boot priority to operate. -
iMac 27 "with the second monitor boots black with cursor
I can't seem to find another discussion altogether as my problem starting special 'black screen ':
New iMac 27 "retina 5K (end of 2015) running OS X El Capitan 10.11.3 with second monitor Samsung connected by Mini DP - DVI. When starting, the two screens are displayed in black, but the cursor is available and can be moved.
I have to make a hard stop and disconnect the second monitor to start at the login screen. Then I can reconnect the monitor and everything works.
Any suggestions for a fix?
So, I spent some time with Apple customer support. Several of the standard troubleshooting for problems of mystery, they came to the conclusion that there was an incompatibility of driver with the Samsung monitor at startup which is mucking things up, and I just have to accept starting with the second disconnected monitor then plug it in again after a successful login.
Samsung does not write the monitor for Mac drivers (for some reason any), that's why the customer support figures that there is a hangup at startup. But why OS X recognize the monitor and run fine otherwise? Why only hang at boot time? And why my Mac Book Pro 2007 running the same version of El Capitan boot fine with the connected monitor? It has something to do with the Thunderbolt/mini-DP-to-DVI connection? I don't know, and I guess that Apple's Support is not either.
I fell on a hack, which is as follows:
1. start with the second monitor connected
2. in the "black screen with cursor" hold the power button quite long to put the computer to sleep
3 wake up the computer with the keyboard or trackpad or other
4 and now the login screen will appear.
5 log in as usual.
6.
I hope this helps someone. One day I'll get a more compatible monitor and it will not be a Samsung.
They make nice dish, however.
-
Windows XP: internet connection
Windows XP: I access to internet in safe mode with networking; then for a short period in normal startup; but then I lose access (IE8, Google, AOL) online. I tried several times, sometimes it seems able to stay online as long as I'm using the installation, but if I take a break, I lose access and return in safe mode.
This question is submitted in safe mode with networking
Hello
Normal mode try to know what actually is the problem with the Internet connection and the components involved.
Maybe this can help.
For the wire connection - http://www.ezlan.net/debug.html
For a wireless connection - http://www.ezlan.net/wireless.html
-
cannot access the files of another user with the admin account
I'm on a computer with Windows Vista 64-bit home problems.
I normally have the computer configured to connect automatically to a non privileged user and rarely use the admin account.
Recently, I downloaded an update (Finally, more like a relocation to the latest version) and realized that I need the admin account to install properly for all users that UAC would make things a royal PITA with a zillion prompts.I quickly disconnected and logged in as admin. Then, I realized that the installation file has been stored in the "downloads" folder in my regular account.
Worse still, I could not access this folder, or I couldn't tab of future security. All I could do was to 'change the property' to my admin account, but I really didn't block me on these issues. Even from Explorer using "run as administrator" gave me problems, although the DIR command in cmd.com would be the list of people.I used the "change user" function to log my account regular and checked the Security tab and saw that the "Administrators" Group had already read and checked 'total control '. Why can't access the admin account? As an admin with XP, I had free access to everything I wanted to leave that I wanted.
What happens if I was a parent and wanted to check to make sure that my child was not software piracy or download illegal music that would get stuck with the fines because I'm his guardian? How would I go about checking his records?
What happens if I was an employer at a small office using working groups and wanted to ensure that the employee was not downloading pornography?
How can I use the powers of the administrator to access other files (regular) user?
Why do I still need to ask this question? It was automatic under NT, 2000, XP and the various servers at least as high as 2003.I found the problem, it was ANOTHER problem with Norton Security Suite for Comcast.
I uninstalled and did not only to release 100 GIGABYTES of space, my boot time has been cut to a quarter of the former time, and this problem has disappeared. -
Unable to access the second switch management
I have two switches, as follows:
Switch #1 is a SG300-20, L3 mode, *. 254.
VLAN3 is 192.168.3.254.
VLAN10 is 192.168.10.x.
VLAN20 is 192.168.20.x.
1 port is a port of access on VLAN3.
2-10 ports are the ports of access on VLAN10.
11-19 ports are on VLAN20 access ports.
20 port is a trunk, PVID VLAN3 untagged VLAN 10 and 20 are marked.
A cable connects port 20 to port to another switch 10.Switch #2 is a SG300-10, L2 mode, peripheral IP set to 192.168.3.253.
VLAN3 defined as same switch #1.
VLAN10 is defined as same switch #1.
VLAN20 is defined as same switch #1.
Port 1 is access ports on VLAN3.
2 to 5 ports are ports of access on VLAN10.
6-9 ports are ports of access on VLAN20.
10 port is a trunk, PVID VLAN3 untagged VLAN 10 and 20 are marked.The question that I have is that any PC on any port on any switch, I can browse any of the VLAN IP to *.254 and access management SG300-20. However, if I try to go on any IP of the VLAN to the *. 253, it expires and can not access.
The only way I can access the SG300-10 management is by directly connecting a PC to the switch 1 Port 1 or switch 2-port 1 or 10, setting the PC to a 3.x IP IP. I can then navigate to *.253 and it works. How can I ensure that I can access the management console from any PC to any port? Thanks in advance.
Either way, everything else works as it should. The DHCP and DNS server on the switch 1 Port 9 to 192.168.20.1 works very well, and the Internet connected to switch 1 Port 2 to 192.168.10.1 is accessible on all three VLANS.
Hello Terry, it seems that your layer 2 switch has no default gateway defined on it.
-
local host to access the vpn site to site with nat static configured
I have two 881 routers with vpn site to site between them. I have a static nat on the router for a Web server that is accessible from the internet. I can't access the Web server through the vpn. All other traffic is fine its VPN. I think that there is a problem with the NAT. Here are the relevant configuration lines.
IP nat inside source overload map route SDM_RMAP_1 interface FastEthernet4
IP nat inside source static 192.168.150.2 bonnefin map route SDM_RMAP_1allowed SDM_RMAP_1 1 route map
corresponds to the IP 100access-list 100 deny ip 192.168.150.0 0.0.0.255 192.168.123.0 0.0.0.255
access-list 100 permit ip 192.168.150.0 0.0.0.255 anyYou should be able to access the web server with its IP private (192.168.150.2) through the VPN connection.
If you just add the VPN and the road map, try to clear the existing translation and see if you can access it via its private of the Remote LAN VPN ip address.
-
image of the disk system reconfigured to the second drive, active C with the same license
Can I make an image of my C drive system and then recreate the image on a second drive, activate using the same license as the first so that I can hot swap the second disc for Windows problems?
That's what I did, but I wonder if I'll run into trouble of having both drives enabled with the same license.
I think Windows will see the second disk as a clone of the first drive and they should not be a problem. I've heard of cloning of their C drive in case something goes wrong so they can instantly Exchange readers on people.
No, because the partition scheme is not the same thing and also, you won't be able to activate it. You can't have multiple installations of the same license.
-
404 error to access the administrator after installing CF10 with IIS 7.5
I installed ColdFusion 10 on Windows 7 Ultimate with IIS running. Everything seemed fine except when he tried to launch the administrator at the end page. I get a 404 error. I tried to run the IISConnector.bat file and no joy.
Any ideas? Help.
Nathan Manning
The problem has been resolved with the help of a support of Coldfusion engineer. In the end, a path corrupted to the aspnet_filter.dll for frame 4.030319.0 in the settings of the ISAPI filter in IIS.
Thanks for trying to help.
-
Cannot access the second account username in XP
2 two Accts user as an administrator. (his) Model of the Tower on the screen shows two usernames - click on hers & wahlah! now can chk E-mail/access to the internet, etc. While on my acct user changed admin to Limited user (in the long run to explain why cela) with a password and clicked on. When close now no user acct names show and cannot get a mock-up using ACCT password. My other half is smoking like cannot enter Outlook Exp for addresses or Internet to favorite settings. HELP PLEASE!
* original title - Windows XP-*.
Hi MaryWilson,
Possibly the user account is corrupted; I suggest you try the following steps to correct the corrupted user profile
How to copy data from a corrupted to a new profile in Windows XP user profile
-
Hoping that someone can help or has had a similar problem.
I just bought a new PC with windows 7, get used to gadgets and was dubious about downloading msn no cert apps/gadgets...
yesterday I downloaded a facebook gadget that worked well at first, but today there dissapeared.couldnt give a s * 1 t on the app
but its stopped me access my gadgets list via a right click on the desktop background and selection gadgets... nothing happens, so I guess that its facebook app, I installed. If all goes well, there is a fix for thisany help would be appreciated... ive been using xp so I havnt had the negative acknowledgement of this gadget stuff yet.
Thanks :)
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Cannot access the internal network of VPN with PIX 506th
Hello
I seem to have a problem with the configuration of my PIX. I ping the VPN client from the network in-house, but cannot cannot access all the resources of the vpn client. My running configuration is the following:
Building configuration...
: Saved
:
6.3 (5) PIX version
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password of N/JZnmeC2l5j3YTN
2KFQnbNIdI.2KYOU encrypted passwd
hostname SwantonFw2
domain name * *.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list outside_access_in allow icmp a whole
allow_ping list access permit icmp any any echo response
allow_ping list all permitted access all unreachable icmp
access-list allow_ping allow icmp all once exceed
the INSIDE-IN access list allow inside the interface tcp interface outside
list access to the INSIDE-IN permit udp any any eq field
list access to the INSIDE-IN permit tcp any any eq www
list access to the INSIDE-IN permit tcp any any eq ftp
list access to the INSIDE-IN permit icmp any any echo
the INSIDE-IN permit tcp access list everything all https eq
permit access ip 192.168.0.0 list inside_outbound_nat0_acl 255.255.255.0 192.168.240.0 255.255.255.0
swanton_splitTunnelAcl ip access list allow a whole
outside_cryptomap_dyn_20 ip access list allow any 192.168.240.0 255.255.255.0
no pager
Outside 1500 MTU
Within 1500 MTU
192.168.1.150 outside IP address 255.255.255.0
IP address inside 192.168.0.35 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP pool local VPN_Pool 192.168.240.1 - 192.168.240.254
location of PDM 0.0.0.0 255.255.255.0 outside
location of PDM 192.168.1.26 255.255.255.255 outside
location of PDM 192.168.240.0 255.255.255.0 outside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 192.168.0.0 255.255.255.0 0 0
Access-group outside_access_in in interface outside
group-access INTERIOR-IN in the interface inside
Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.0.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Dynamic crypto map outside_dyn_map 20 match address outside_cryptomap_dyn_20
Crypto-map dynamic outside_dyn_map 20 the transform-set ESP-DES-MD5 value
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
client authentication card crypto outside_map LOCAL
outside_map interface card crypto outside
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 20
encryption of ISAKMP policy 20
ISAKMP policy 20 md5 hash
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
Swanton vpngroup address pool VPN_Pool
vpngroup swanton 192.168.1.1 dns server
vpngroup swanton splitting swanton_splitTunnelAcl tunnel
vpngroup idle 1800 swanton-time
swanton vpngroup password *.
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd address 192.168.0.36 - 192.168.0.254 inside
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
scott hwDnqhIenLiwIr9B of encrypted privilege 15 password username
username password encrypted ET3skotcnISwb3MV privilege 2 norm
username password tarmbrecht Zre8euXN6HxXaSdE encrypted privilege 2
username, password jlillevik 9JMTvNZm3dLhQM/W encrypted privilege 2
username privilege 15 encrypted password 49ikl05C8VE6k1jG ruralogic
username bzeiter 1XjpdpkwnSENzfQ0 encrypted password privilege 2
name of user mwalla encrypted password privilege 2 l5frk9obrNMGOiOD
username heavyfab1 6.yy0ys7BifWsa9k encrypted password privilege 2
username heavyfab3 6.yy0ys7BifWsa9k encrypted password privilege 2
username heavyfab2 6.yy0ys7BifWsa9k encrypted password privilege 2
username djet encrypted password privilege 2 wj13fSF4BPQzUzB8
username, password cmorgan y/NeUfNKehh/Vzj6 encrypted privilege 2
username password cmayfield Pe/felGx7VQ3I7ls encrypted privilege 2
username privilege 2 encrypted password zQEQceRITRrO4wJa jeffg
Terminal width 80
Cryptochecksum:9005f35a85fa5fe31dab579bbb1428c8
: end
[OK]
Any help will be greatly appreciated
BJ,
You try to access resources behind the inside interface network?
IP address inside 192.168.0.35 255.255.255.0
If so, please make the following changes:
1 SWANTON_VPN_SPLIT permit access ip 192.168.0.0 list 255.255.255.0 192.168.240.0 255.255.255.0
2-no vpngroup swanton splitting swanton_splitTunnelAcl tunnel
Swanton vpngroup split tunnel SWANTON_VPN_SPLIT
outside_cryptomap_dyn_20 3-no-list of ip access allowing any 192.168.240.0 255.255.255.0
4 - isakmp nat-traversal 30
Let me know how it goes.
Portu.
Please note all useful posts
Maybe you are looking for
-
When I hold down the ALT key and click on the WiFi menu extra, I can see the BSSID of the aircraft from the airport, that I am connected. But when I opened the Utiity airport, I can't find a BSSID develop which I am connected to one (I have 5 base st
-
By clicking on the firefox icon causes the blue screen crash
It started Friday, February 25, at mid-day. The only changes to the system this morning there were a plugin Adobe Flash player or Shockwave update, I'm not sure and an update on the Office of Scottrade Elite trading app. Two of these changes took pla
-
Hide/show the Control Panel button
Hello people! I want to show some Boolean buttons on the control panel only if another button Boolean is true - and hide them if the button is set to false.Read some posts, but could not understand how it works with the visible property. Thanks for y
-
got my office all messed up when I can't use one of my photos on my help desk!
I got my office all messed up where I can not post one of my pictures of my photos on my office could have something to do with the theme thing I don't know? I don't know what I did how to fix it thank you
-
Breath my old XP and put in place a new W7 Pro 64 b. stupid did me not carefully the manual before I went away to transfer all files and settings XP, the wizard files and Settings Transfer (FAST) "old." Now I'm stuck which dominates the stream _ with