To access the speakers

Similar Questions

• 23 - c010xt envy: internal speakers continue to work after plugging in the speakers external or headphones

  I got this computer for years with no problems. I use external speakers connected to the audio jack on the back. Once you plug in external speakers (or headphones), the internal speakers are disabled as expected.

  Last night my PC automatically installed the anniversary of Windows Update (update feature Windows 10, 1607 version). After this update, now my two internal speakers and external speakers are working at the same time! I can't turn off the internal speakers without also turning off my external speakers. The volume affects both sets of speakers as well. I tried to disable audio and re-clearance but that did not help.

  How can I go back to my original audio behavior where connect speakers external (or headphones) to the rear Socket 3.5 mm would automatically turn off the internal speakers? Thank you.

  Diameter of thank you!

  I couldn't select no other devices in reading or recording tab becuse it is said that they are "not connected". Update drivers, said that later I have already.

  But when I checked the other post, he fixed it! Now I get only audio speakers again... just like before and how it was supposed to be. Thanks again.

  Windows 10. So I did some research on a Microsoft support forum and I found this solution:

  • Access the device driver software manager - right click on IDT high definition audio CODEC - updated.
  • Choose "Browse my computer for driver software" - choose "Let Me pick from a list of drivers for devices on my computer.
  • Select "High Definition Audio Device" (not IDT high def...)  This is important) and click Next. You get a warning message but answer 'yes '.
  • Once windows have updated driver software, try to play the audio again and check.

• Qosmio G50: How to clean the speakers under transparent cover?

  Hello

  In the transparent cover who are pregnant, they gathered dust and moisture.
  Can someone tell me how to get to clean;

  Thank you

  Hello

  I guess that transparent speaker cover cannot be removed separately.
  I think that it of a part of the top cover and I guess you will have to disassemble the whole laptop in order to get access to the speakers
  Simply said; It s not worth a try!
  Laptop disassembly is a very delicate procedure and I would risk any damage part only to remove some of the dust of the coverage of the speaker

• I lost the sound on the speakers of my HP netbook, but I however get his helmet

  First, I apologize that it is a repost - I have received notification that someone had replied to my previous announcement, but when I tried to access it today, it was gone! : o

  I have a laptop HP 2140 running Windows XP (32 bit), Firefox 5.0. p/n number is FM839UT #ABA.

  Last Sunday, I lost all THE sounds (sound system, music, alerts, etc.) no reason why.  (The only thing I can think that I did was to download a new version of Flash, but its 1) worked after that and 2) I uninstalled Flash several times since then.

  Last night, I discovered that I AM getting sound with headphones, but I can't always solve the external noise through built-in speakers of the netbook.

  Here are some other things I did to try to resolve the problem:

  • checked to make sure that the speakers are selected, volume works, and that nothing is cut
  • through its programs troubleshooting
  • downloaded and run the Fixit from Microsoft for audio (he made an adjustment, but no other effects)
  • restored the system to several days before losing his (no effect)
  • reloaded the audio drivers on HP website (no effect)

  Nothing worked! :(  What can I do else?

  Thank you; the problem was in fact through internal speakers of the netbook as mentioned above, there is no problem with them being "plugged."

  However, he proved that a loose cable was the problem!  I discovered that when my netbook screen was half closed, I was getting sound.  Then, as I opened it slowly, I lost his approach to the screen by 90 degrees.  The speakers are at the bottom of the screen, and it is obvious that the thread that runs through the hinge that cements the computer to the speakers (I think just in the left speaker, actually) is loose.

  So, if I keep the screen at slightly less than 90 degrees, I hear. : p it's annoying, but I'm putting up with it until I can take it to someone who can disassemble for me (I don't feel comfortable to do it myself) and set the connection.

  Thanks to all who tried to help me!

• Try to use the speakers and headphones

  • I have a Durabrand 5.1 speaker system and normal headphones with microphone included. The speakers plug in a headphone and headset (of course). I'm trying to figure out how make my computer recognize them both at the same time. Until my recent updates I could disable my speaker and sound was still coming through the headset but either headphones now have no audio or the speakers do not have. Realtek Hd Manager doesn't seem to like them both at the same time. At the same time I didn't need the microphone turned on the headset due to having a Logitech cam with a. Any help would be appreciated.

  Hi Xerosk,

  First try to run the Audio troubleshooter built into Windows 7 and check if it can find any question and fix. Access the link below and follow the steps to run the Audio troubleshooter in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Also, make sure that the default sound device is set correctly for the audio device you are using. To set the default device, follow these steps:

  a. click on, and then type Sound in the box to start the search.

  b. click sound in the search at the top of the beginning menu.c results. Click the reading notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected.

  Follow these steps:

  d. on the Read tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  e. on the Read tab, select the playback device, click on configure and make sure that the configurations are set correctly.

  f.Select the audio device you want as the default audio device and then click on set as default.

  g. click OK to save your settings and close the sound dialog box.

  Determine if you can now hear. If you can hear the noise, the problem is resolved.

  Also try to update the audio drivers supplied by Device Manager and check if it helps. You can access the link below and follow the steps to update the drivers on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also contact relatek and check if you need to make changes in the settings in Realtek HD manager for the device to work.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

  Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

  I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

  I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

  Can anyone help?

  Hello

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:
  1. right click on the folder on the external drive and click Properties.
  2. in the Properties window, click on Security tab.
  3. now, click Edit , and then click Add.
  4. now, type everyone in the box and click OK.
  5. check the full control box.
  6. click on apply and then click OK.

  You can also try the mentioned below as follows:

  1. click on start.
  2. go in Control Panel.
  3. Select "SOUND".
  4. double-click on speakers.
  5. click on the tab advanced and then uncheck the enable audio enhancements.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't access the backups on Time Capsule

  A month ago I deleted from my hard drive and more. I have a MacBook Pro 2012 running macOS. I can't access the files on Time Capsule before is erased in the month of August, I can see the story in the timeline panel, but I don't have access to anything before erasure. Is it possible to access to the files before the wipe?

  A month ago I deleted from my hard drive and more.

  What hard drive you are talking about: one internal on your MacBook Pro (MBP), an external drive attached to the MBP for Time Machine backups, or internal hard drive to time Capsule?

• Can I access the real coordinates of an image in iPhoto?

  Can I access the real coordinates of an image in iPhoto? Places shows a rudimentary map of the location of the photo, but I would like to retrieve numeric values.

  Not in ipHoto, but if you export the non modified original and then open with preview the Inspector will display numeric values assuming that they are in the EXIF data

  LN

• its iOS is not always available through the speakers.

  I tried to play a video on my iphone (latest version of ios) and the sound did not come through the speakers. I had to plug in the headphones. I tried youtube, facebook and play the sound through the speakers. What is the problem and how to fix it!

  Thank you

  Try steps here If you hear no sound or distorted sound of your iPad, iPhone or iPod touch speaker - Apple Support

• To access the video and music files downloaded from an application

  I downloaded some music and videos using an application, the JW library, but I can't access the music or videos with the exception of this app. Is there a solution?

  I really need to put these media on a playlist in media player so I can listen to songs while on other activities.

  What should I do to make media players to access the music and videos?

  Thank you

  Hello

  Maybe these applications help you ☞ JW Player & Music JW.

• To access the backups Time Machine another computer

  I have spent a good hour looking for a solution to this problem, but have developed empty-handed.

  If I understand correctly, backups of access from another Mac time Machine, I need to connect the backup drive to another Mac and select "Browse Other Time Machine disks... "in the Time Machine dock menu and choose the drive.

  The backup drive appeared as expected and I clicked on "Use selected Disk" to enter the time Machine.

  At this point, the computer between what seems to be Time machine, but shows a Finder window to the hard disk of the computer rather than the backup drive and shows not all dates before "today (now)."

  A thread has suggested that I open a Finder window and select 'Computer' in the menu to reach before the opening of time Machine. It did not work.

  Another thread has suggested that I have use the Migration Wizard rather to recover files and folders, I need. This is not ideal, but I tried it anyway, the result being that the Migration Wizard app remained "Looking for source...". "without finding the backup drive.

  Before formatting my drive on the original Mac, I had checked for if ensure that I could access the Time Machine backup while it was plugged into the backup drive (which he successful well).

  I use the latest version of El Capitan 10.11.6 on a MacBook Air (mid 2011). Backup is a MacBook Pro (mid-2010) who ran as El Capitan.

  I would appreciate any other suggestions!

  So, I discovered the solution, which has been in a simpler way that I expected. Before opening, Time Machine, it is necessary to find the sparsebundle Disk Image in the backup disk in the Finder and open it with "DiskImageMounter." Then, you must select "Computer" in the Finder menu reach before choosing the option "Browse Other Time Machine disks... "menu to the dock of time Machine. The first finder window it shows in the Time Machine view still belongs to the computer, but now it shows the previous backups, who are all from the backup drive!

• Our AppleTV alcoholic, if we opt for a movie / TV that was bought, we get the notice that it is "impossible to load the content. You need to restart completely to access the content you've purchased.

  We have the AppleTV (4th Gen, 64 GB). Whenever we 'wake up' the AppleTV from sleep, we are unable to access all our content purchased until we start the system. We have never had this problem until a few weeks ago. All software is up-to-date and automatically update, internet is very good, and nothing has changed since we have implemented the AppleTV. Frustrating to not be able to access the content that we have already purchased without jumping through hoops.

  Hello

  I met this time. All I did was to completely close the application TV Shows and reopened. It worked after that without needing a reboot.

• Firefox crashes at random. Affected PC together. Something is accessing the hard drive

  Firefox crashes at random. Impossible to move on the screen, select all functions, cancel or enter data

  Affected PC together. Can't do anything on the PC.

  Something is accessing the hard drive. Hare drive the LED flashes quickly it's a running process.

  Shows details of the system;

  Plug-ins installed

  Shockwave Flash 11.2 r202
  Shockwave Flash 19.0 r0

  Shockwave Flash 19 is not compatible with your system.
  Remove all Shockwave flash.

  Flash Player (Linux) Version 11.2.202.540
  
  https://www.Adobe.com/products/flashplayer/distribution3.html

• How to access the retina on iphone 5 s screen

  How can I access the retina display in my iphone 5 s.  I don't see anything in the manual for the phone but in the description of the phone, he says he has the retinal display.

  You look at the screen and you have access to it.

  It does not analyze our retina.

  The retina display has a resolution higher than the eye can see to ~ 10 "-12". "

  That means that you can not see the individual points the screen is made of.

• Well confused. I use click on Favorites in the upper left corner of the screen. I can still but I can't access the properties of the bookmark

  I used to just right click on a bookmark of Bookmark menu in the upper left corner of the screen. Now when I right click on Favorites, I can't get any of the choice to highlight, they are subject, and nothing happens. But if I add bookmarks little star at the high right to help customize I can access an area of the one bookmark away. Seems that just suddenly happened. I like to use the left side of the screen, but cannot access the properties there. Any difficulty?

  Devil well, now, all is well, seems to set just after a reboot. So solved my problem all by my lonesome. Please disregard.