To add a program just check one or all?

Similar Questions

• I'm unable to open Add/Remove programs in the Control Panel, all other bits in the control panel can be opened.

  Add/Remove programs. I'm unable to open Add/Remove programs in the Control Panel, all other bits in the control panel can be opened. Any ideas? Thank you.

  original title: Add/Remove programs.

  Hi, Tay 13,

  Open command prompt window

  type the following command

  SFC/scannow

  Press enter

  Note: There is a space between SFC and / scannow

  Once the scan is complete, look for the journal by clicking Start > run

  Type

  %windir%\Logs\CBS

  Search for repaired files or cannot repair file and note the name of any file not repaired.

  New attempt to open Control Panel Add/Remove section.

  Open the command prompt window

  Type the following command

  appwiz.cpl

  Press enter

  This will open Add/Remove programs

• deleted programs manually always appear in the list, add/remove programs

  I have a large number of programs I uninstalled, but they still appear in Add/Remove program with the button Delete. Using the button Delete has nothing else that wasting time by telling me that he was unable to find the components. I went to the registry editor and manually delete all programs. I then checked the list Add/Remove programs and programs have disappeared. Then, I closed the registry editor and check the Add/Remove Programs list. The programs appear once more, this time without a button Delete. When I go back to the registry editor, the programs have disappeared. How to make them out of the Add/Remove Programs list?

  That all sounds pretty messed - too bad you took this approach.

  It is also a pity that forums MS Answers does not ask for any information system when a new question is asked, so we don't know anything about your system.

  Some people have good luck with the free version of Revo Uninstaller.

• im running xp and Add/Remove programs will not let me delete all programs

  im running xp and Add/Remove programs will let me delete all programs, nor does it show all of my programs

  Hello

  · You receive an error message or error code when you try to uninstall the program?

  · Were there any changes made on the computer before the show?

  Run the fix it from the link: Add/Remove Programs displays installed the tool incorrectly: http://support.microsoft.com/kb/266668

  Add to that, I suggest to run online virus scan and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• How to uninstall Java 2 Runtime Environment, SE v 1.4.1_01 who not listed in Add / Remove programs?

  I need to uninstall Java 2 Runtime Environtment, SE v1.4.1_01, which is detected by Java, but is not listed in the window add / remove programs. I already followed all the instructions given by Java, but I could not find the registry after running regedit HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/uninstall.

  Thanks in advance!

  Hi Alvaro_900,
   
  -Which is the key that you can't find?
   
  You can find the uninstaller for Java folder in the C:\Program Files\InstallShield Installation Information folder.
   
  Try to uninstall it from there and check.
   
  For more information, see:
  After uninstalling Java, how to remove its entry in Add/Remove programs?

• Add Remove programs services does not display anything, just a blank page...

  I open Add Remove programes, but the page shows nothing... no error message and no list of installed programs...

  See if one of these solves your problem:

  "Add/Remove Programs tool displays installed programs correctly"
    <>http://support.Microsoft.com/kb/266668 >

  "Add and remove programs appears white OR takes a long time to fill in the information."
    <>http://support.Microsoft.com/kb/2249920 >

  HTH,
  JW

• Can not enter in Add / Remove programs to change programs, screen just stays white? Nothing is there

  Need help. I am more able to access Add/Remove programs from the control panel. Once I get in the app, the screen displays not all programs and the right toolbar scrolls with the circle progress indicator. I'm under Windows One Care on my pc and have no viruses appear.  Don't know if its disabled or what? Anyone have any ideas. I can't run Microsoft Updates through update, but it seems that the One Care running updates. Thanks Kevin

  Thanks was able to understand after the search for topics on the forums. Find April Certificate for a root file, I had to reinstall. After that I was able to update all the updates and everything works now.

• Add Remove Programs screw up

  I am trying to go to add remove programs. I get a message saying: there has been limited, check with your administrator. I am the administrator and I have no idea of what is happening. I'm no computer expert and would appreciate any help you could give me...

  Thanks in advance

  I am trying to go to add remove programs. I get a message saying: there has been limited, check with your administrator. I am the administrator and I have no idea of what is happening. I'm no computer expert and would appreciate any help you could give me...

  Thanks in advance

  What happened before that?  What is the probability that you are trying to do to get rid of infection/infestation you suffer?  ;-)

  Click Start--> RUN and type:

  Regedit

  ... Press ENTER.

  Navigate to this key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Uninstall

  Click on uninstall to highlight. Search this DWORD in the right pane:
  NoAddRemovePrograms

  If you find, right-click on it and choose DELETE in the menu pop up and down.

  If this isn't the case, navigate to the following key and look for the same entry. Remove it from there if you find.
  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Uninstall

  Will probably want to clean this machine...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• In "Add/Remove Programs" he has no option to remove when a program is selected in the populated list?

  I can see all of the programs listed in Add/Remove Programs option in the control panel.  When I select a program in the list, there is no option to remove / uninstall the program.  I tried a lot of programs and none give me the option?

  Hello
   
   
  Method 1.
  Reregister the install and check engine.
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
   
  MSIExec /Unregister
   
  MSIExec/regserver
   
   
  Method 2.
  Check if you can in safe mode. Note: you will not be able to uninstall programs in safe mode. It's just to check if you can.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Method 3.
  It seems that there is a background app that launches the installer of Windows. We can perform a boot minimum troubleshooting to find the same thing. You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
  
  Method 4.
  See also the steps listed in the article below.
  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651/en-us
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Add/Remove Program (Adobe 8.1.6) _ failure

  Impossible to remove Adobe, receive system message direct me to find/use valid Windows hotfix package install.

  Any ideas to find out where / who I should get even?

  Pinned Windows Installer Clean Up utility and many fixes for God knows what; in my hands just likely to cause still more acute problem.

  Thank you and hoping that

  Hi, sorry for the delay to come to you, have been disarmed with man flu

  Now running Adobe 9.4.1 simply seek to recover the 86.6 mb used by the previous version unusable (8.1.6).

  Following error message:

  "This patch package could not be opened, check that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid windows setup hotfix package.

  Tried to contact Adobe, the response was ' me mmm, sounds technical, you want to take our paid support option?  RESPONSE - no thanks, don't know if its you problem or Ms.

  ? How I would try to uninstall using "Safe Mode"?

  Have not tried to link http://kb2.adobe.com/cps/400/kb400769.html because not all sure as to what / where should potential remifications and me if I were to fault upward in some way (me, strongly the technophobe)

  Thank you for your efforts for sat down in this regard.

  concerning John S

  You get in Mode safe mode by repeatedly pressing the F8 key as the computer starts up.  On the Advanced Boot Options menu that appears, navigate by using the up/down arrows to select Mode safe mode, and then press ENTER.  Given what you have said, however, I doubt that using Safe Mode will help you.

  Adobe warns against having multiple versions of Acrobat or Acrobat Reader is installed, and suggests that uninstall a previous version AFTER installing a later version might cause problems, requiring the latest version to be re-installed.

  That said, Adobe seems often leave pieces of his great software on your system after uninstall.  Although 86.6 mb seems bigger than I expect, it sounds as smaller than a full installation of the Adobe Reader software.

  Did you actually two entries in Control Panel > Add / Remove Programs, one for Adobe Reader 8.1.6 and one for Adobe Reader 9.1.4?  Or you just a directory C:\Program Adobe 8.0 with 86.6 MB of files it contains?

  Two suggestions:

  If you have two entries in Add / Remove Programs, rename C:\Program Adobe 8.0 as C:\Program Files\Adobe\OldReaderFiles.  Then wait a week or two; Use Adobe Reader as usual; and if no problems, just delete the whole directory.  If you are really paranoid, burn the directory on a CD before deleting.

  Alternatively, if you have two entries in Add / Remove Programs, use the free Revo Uninstaller or Windows Installer Cleanup utility.  Microsoft itself is supplying the Installer Cleanup Utility, saying that, in some cases, it removed more than it was supposed to.  Yet, it can be a useful tool; to be sure, you must back up your system first.  If you can't remember where you saw it, you can download the Installer Cleanup toolhere.

  Alternatively, you can use Revo Uninstaller .

  According to uninstall it you use the cleanup tool, no doubt would it be a good idea first to download the latest version of Adobe Reader (9.4.1) (unless you still have the installation program on your computer) and uninstall your current working version of the player before you try to uninstall the old version.  When the Installer Cleanup Utility or Revo Uninstaller is finished, reinstall Adobe Reader 9.4.1.

• Failed to add a program to the DEP

  Here's the question.  I play Day of Defeat: Source steam.  After one of their updates I started getting errors when I leave the game.  He told me that DEP closed the program.  I go to settings to turn off DEP for hl2.exe (the program for the game that crashes), but get an error saying that the program SHOULD run with DEP.  Now, just check the number, I take on my laptop that I use for the trip.  Running the same OS and I have exactly the same problem.  I fought back with this trying to get DEP to allow this program to run, but he used.

  I did the following:
  1 has attempted to add hl2.exe with the exception of the DEP.  FAILED
  2. enable DEP for programs and Windows services only.  FAILED
  3. people with disabilities all antivirus and firewalls. FAILED
  4 performed a clean boot by following the instructions on the windows support and repeated 1 and 2.  FAILED
  5 reinstall the game completely on both machines.  FAILED.
  Hl2.exe replaced with a copy of another steam game.  LET ME ADD THE PROGRAM TO DEP BUT ALWAYS CRASHED WITH EXACTLY THE SAME PROBLEM THEN WOULDN'T LET ME ADD BACK TO THE DEP.  FAILED
  6. update all the drivers I could think.  FAILED

  I did restart after each of these steps in order to ensure.

  I'm at my wits end at the moment.  I contacted STEAM on this subject, but they keep linking me to windows help links and have no idea why I can't add it to the list of DEP exceptions.  STEAM insists that it is a Windows problem, even if I'm having this problem on my desktop AND my laptop.

  Both systems are well above the recommended game system configuration, two systems working for several years with this game up to now, the two systems running the same operating system.

  Windows Vista Ultimate 64-bit

  It's weird because I can play the game very well, but it crashes whenever I stop.  It's really annoying.

  Hello

  Try to run the game in compatibility mode and check if that helps.

  See the link below to run a program in compatibility mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• I want to know how to stop adds irretating me just a click, I get 5 page just add that I can't navigate freel, I feel really irritate

  I use Windows 7 and fire fox 29, but I'm really not happy because when I try to open the page I make more page 5 and adds suddenly comes first and it take time narrow but immediately made it again once I can't really just browse freely I feel bad really the best done better Explorer , but not explore you isn't allows way adds but how you crome and Opera which adds more than just Center page corner page last page you have the chance get price myatas and adds much that irritates me I can't brouse freely same thing also requist crome and Opera also please help stop adds unnesary just means
  When I tried to open a page, but I'm opening another page is very bad feeling and open another page I was date it give me more money unnesary data access provider please help me solvue this problem which is very big problem for me

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• I just updated Firefox and now it crashes, does not not tabs or add-ons, and the user interface is all messed up.

  I was power off update of Firefox for a while because I knew some of my modules aren't compatible yet, and the main reason I use firefox is because of the multitude of modules. Finally today I decided to go and let it install. As soon as he returns to the top, it's completely different from the way I had my firefox. The buttons are all moved around, each tab has two Xs to close with the back button does not work, there is no way to scroll more tags do not take on the screen and for some reason the firefox button is not collapse in the main beam.

  My session has not been restored, either, which really annoyed me, because I had a very high volume of open tabs. Right now I just want to come back, because I hate what happened, but I know that's not possible.

  I'm sorry to hear that you have so many questions. What version of Firefox you used before?

  The problem of double title bar has been identified as a problem with the extension of the tax Mix Plus but it does not affect everyone, there is an interaction with something else (not exactly what clear although Norton Toolbar has been mentioned in a thread).

  There is a new version available that you can try. If Firefox is stable enough to do...

  Firefox orange (or the Tools menu) button > Add ons > ' gear' icon > check updates

  If your beta version does not update, you can try to install from the Add-ons site.

  More generally, can I suggest disabling the extensions as much as you can live without for 24 hours and gradually reactivate? This should help isolate the interactions between them. As you know, you can do so here:

  Firefox orange (or the Tools menu) button > addons > Extensions category

  Finally, about your old session, if you have not closed Firefox, you could find a sessionstore.bak file in your profile folder that contains your old session. For easy access to this file, try

  Help > troubleshooting information > "view file" button.

  Grab a copy of this file and save it somewhere outside the folder because it is overwritten when you close Firefox. Had to run, but if find you one with a suitable date, a person can help you to restore.

• Remove labview 2009 without using Add/Remove program

  Hi all

  I have problem with the removal of LabVIEW 2009.

  I deleted some folders in the C drive, folder OR.

  Now I can't start my LabVIEW 2009 and it does not appear in my Add/Remove Programs list.

  I tried to delete all the folders and files in the C drive under folder OR, but the pop out error message shows that I don't have the authority to do so.

  So, how can I remove it completely?

  I had intended to reinstall LabVIEW 2009 after that I have completely removed.

  Very much appreciate your help.

  That's why I say try to reinstall LabVIEW. He could just do a repair of your installation. Then, you can use Add/Remove programs to uninstall completely.

  But when you uninstall completely there will be folders OR remaining. These are things like user.lib.

  Have you tried to reinstall the runtime?

  One last thing. I don't know how you got your installation so messed up, but remember that if you build a Setup program you should not install on a system with the development environment. There are so many things that can go wrong.

• try to get "missing ___.msi" several times on different programs, when I browse to find and remove in Add/Remove Programs, it is not there.

  I have windows XP, .NET 4.0 (4.5)?, service packs1, 2, 3, 4.0 and 4.5. I have a HP Pavilion a620n. I do not know is that 4 or if I need and IE8. I tried to remove several programs in Add/Remove Programs, and it said an ending with .msi file that is "missing or moved" is necessary, even if it is for an Installer (?), no withdrawal. He arrived with more than one program as I said. When I search I can't find the requested file. If it is missing, how can I proceed? Please help if possible and thank you in advance for your time!  :)       Kinamaygray

  Hi Kinamaygray,

  .NET frameWork is an integral part of many windows-based applications and provides common functionality for these applications to run. I suggest you do not uninstall the .net FrameWork, it may cause some programs not do not work. For more information on the .net FrameWork, you can check the link.

  http://msdn.Microsoft.com/en-us/library/zw4w595w.aspx

  I suggest you run the Microsoft Fix - it from the link below and if it helps to solve the problems of the uninstalling programs.

  Solve problems with programs that cannot be installed or uninstalled