Add automatically the dates in a date range

Is it possible to enter a start date and end date in a form and then have a line created for each day in the beach with the date? I have created a timesheet and hold a line a day in the date range entered.

Yes - it's quite possible.

To make this work, you have:

1. set up your timesheet as fields entries in a repeating subform

2. decide if you want the timesheet entries to update for example on the click of a button, or when the user enters a new date

3. write code on the event suitable for calculating the number of days between the dates and set the number of instances of the repeating subform

Please see the attached sample form.

Notes:

-J' used FormCalc this makes it easier to manipulate dates. In general, I would use JavaScript, but the date manipulation is one of the rare occasions when formCalc is by far the best choice

-J' used a field floating in the subform timesheet to demonstrate how you displayed the date in each line

-This form is an example. Additional work is needed to make this robust dealing with the case, for example when the date is before the following date

Ben Walsh
www.Avoka.com

Tags: Adobe LiveCycle

Similar Questions

How do you add all the data for iPad2 iPad mini III

I want to add all the data of an iPad2 an Mini iPad without deleting all the data on the iPad Mini in order to bring the iPad 2 to the default settings and then give my grandson?

1 transfer content from an iPhone, iPad or iPod touch to a new device - Apple Support

2. what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

SUM (case use this structure to get average values on the date range

I use:

Oracle SQL Developer (3.0.04) build hand - 04.34 Oracle Database 11 g Enterprise Edition 11.2.0.1.0 - 64 bit Production

How do we use the function sum with a structure of matter inside.

so I gave that looks like have an ID, date and value. I'm looking to get the day 7 medium for the date range of 04/01/2013 to 20/04/2013

with t as (
select 1 ID_Key,to_date('4/1/2013','mm-dd-yyyy') date_val, 10 Value_num from dual union all
select 1 ID_key,to_date('4/2/2013','mm-dd-yyyy'), 15 from dual union all
select 1 ID_key,to_date('4/3/2013','mm-dd-yyyy'), 20 from dual union all
select 1 ID_key,to_date('4/5/2013','mm-dd-yyyy'), 0 from dual union all
select 1 ID_key,to_date('4/8/2013','mm-dd-yyyy'), 12 from dual union all
select 1 ID_key,to_date('4/9/2013','mm-dd-yyyy'), 8 from dual union all
select 1 ID_key,to_date('4/10/2013','mm-dd-yyyy'), 6 from dual union all
select 1 ID_key,to_date('4/12/2013','mm-dd-yyyy'), 10 from dual union all
select 1 ID_key,to_date('4/13/2013','mm-dd-yyyy'), 0 from dual union all
select 1 ID_key,to_date('4/14/2013','mm-dd-yyyy'), 0 from dual union all
select 1 ID_key,to_date('4/15/2013','mm-dd-yyyy'), 10 from dual union all
select 1 ID_key,to_date('4/16/2013','mm-dd-yyyy'), 5 from dual union all
select 1 ID_key,to_date('4/17/2013','mm-dd-yyyy'), 2 from dual union all
select 1 ID_key,to_date('4/20/2013','mm-dd-yyyy'), 3 from dual union all
select 2 ID_key,to_date('4/3/2013','mm-dd-yyyy'), 12 from dual union all
select 2 ID_key,to_date('4/5/2013','mm-dd-yyyy'), 15 from dual union all
select 2 ID_key,to_date('4/6/2013','mm-dd-yyyy'), 5 from dual union all
select 2 ID_key,to_date('4/7/2013','mm-dd-yyyy'), 7 from dual union all
select 2 ID_key,to_date('4/9/2013','mm-dd-yyyy'), 10 from dual union all
select 2 ID_key,to_date('4/11/2013','mm-dd-yyyy'), 5 from dual union all
select 2 ID_key,to_date('4/12/2013','mm-dd-yyyy'), 0 from dual union all
select 2 ID_key,to_date('4/13/2013','mm-dd-yyyy'), 0 from dual union all
select 2 ID_key,to_date('4/15/2013','mm-dd-yyyy'), 6 from dual union all
select 2 ID_key,to_date('4/16/2013','mm-dd-yyyy'), 8 from dual union all
select 2 ID_key,to_date('4/17/2013','mm-dd-yyyy'), 0 from dual union all
select 2 ID_key,to_date('4/18/2013','mm-dd-yyyy'), 10 from dual union all
select 2 ID_key,to_date('4/19/2013','mm-dd-yyyy'), 5 from dual
)

* Please let me know if the table does not load.

I would get the average of 7 days, as long as there is date for the rank of enough previous dates, is it not, then it returns a null value.

the results should look like this

ID_Key      date_val     Value_num     7Day_Avg     7Day_Avg2
1     4/1/2013     10          null          null
1     4/2/2013     15          null          null
1     4/3/2013     20          null          null
1     4/5/2013     0          null          null
1     4/8/2013     12          6.71          11.75
1     4/9/2013     8          5.71          10.00
1     4/10/2013     6          3.71          6.50
1     4/12/2013     10          5.14          9.00
1     4/13/2013     0          5.14          7.20
1     4/14/2013     0          5.14          6.00
1     4/15/2013     10          4.86          5.67
1     4/16/2013     5          4.42          5.17
1     4/17/2013     2          3.85          4.50
1     4/20/2013     3          2.86          4.00
2     4/3/2013     12          null          null
2     4/5/2013     15          null          null
2     4/6/2013     5          null          null
2     4/7/2013     7          5.57          9.75
2     4/9/2013     10          7.00          9.80
2     4/11/2013     5          6.00          8.40
2     4/12/2013     0          3.86          5.40
2     4/13/2013     0          3.14          4.40
2     4/15/2013     6          3.00          4.20
2     4/16/2013     8          2.71          3.80
2     4/17/2013     0          2.71          3.17
2     4/18/2013     10          3.43          4.00
2     4/19/2013     5          4.14          4.83

As you can see, there are gaps in the dates, the value is then processed by zeros for the 7Day_Avg and then ignored for the 7Day_Avg2 (not counted in the number of days on average do to no valu_num line)
I tried something like this at first, but becomes "missing keyword" error

select
t.*/,
sum(
      case 
        when date_val between :day2 - 6 and :day2
        then value_num between date_val - 6 and date_val
        else null
        end
        )
        as 7Day_avg

form t

Should I have the structure outside the sum function?

Any thoughts?

Published by: 1004407 on June 7, 2013 11:06

Hello

If you want to calculate the average of the last 7 days, including the current day, then then RANGE should be 6 PRIOR, not 7.

Try this:

WITH got_min_date_val AS

(

SELECT id_key, date_val, value_num

MIN (date_val) compared to (AS min_date_val)

WHERE the date_val BETWEEN TO_DATE (April 1, 2013 ', "dd-mm-yyyy")

AND TO_DATE (April 20, 2013 ', "dd-mm-yyyy")

)

SELECT id_key, date_val, value_num

CASE

WHEN date_val > = min_date_val + 6

THEN SUM (value_num) OVER (PARTITION BY id_key

ORDER BY date_val

PRIOR TO TIER 6

)

/ 7

END AS avg_7_day

CASE

WHEN date_val > = min_date_val + 6

THEN AVG (value_num) OVER (PARTITION BY id_key

ORDER BY date_val

PRIOR TO TIER 6

)

END AS avg_7_day_2

OF got_min_date_val

ORDER BY id_key

date_val

;

Output:

ID_KEY DATE_VAL VALUE_NUM AVG_7_DAY AVG_7_DAY_2

---------- --------- ---------- ---------- ------------

1 1 APRIL 13 10

1 2 APRIL 13 15

1 APRIL 3, 13 20

1 5 APRIL 13 0

1 APRIL 8, 13 12 6.71 11.75

1 APRIL 9, 13 8 5.71 10.00

1 APRIL 10 13 6 3.71 6.50

1 12 APRIL 13 10 5.14 9,00

1 13 APRIL 13 0 5,14 7.20

1 14 APRIL 13 0 5,14 6.00

1 15 APRIL 13 10 4.86 5.67

1 16 APRIL 13 5 4.43 5.17

1 APRIL 17, 13 2 3.86 4.50

1 APRIL 20, 13 3 2.86 4.00

2 APRIL 3, 13 12

2 5 APRIL 13 15

2 6 APRIL 13 5

2 7 APRIL 13 7 5.57 9.75

2 9 APRIL 13 10 7,00 9.80

2 11 APRIL 13 5 6.00 8.40

2 12 APRIL 13 0 3.86 5.40

2 13 APRIL 13 0 3.14 4.40

2 15 APRIL 13 6 3.00 4.20

2 16 APRIL 13 8 2.71 3.80

2 17 APRIL 13 0 2.71 3.17

2 18 APRIL 13 10 3.43 4.00

2 APRIL 19, 13 5 4.14 4,83

Post edited by: FrankKulash

Sorry; I wanted to respond to OP, not Greg

Get number of records in the date range - IDE: PLSQL Developer
I want to count the number of records of members who register within a date range specified, based on effective and expiration dates and their "elg_code". I posted the SQL code for some examples of data. What I would like to see returned is in three columns of the counties where the eff_date date_exp members fall within the date range specified by the SQL and have an Elg_code of ' ' (space).

So what I would like is all members with elg_code ' ' where he eff_dt and exp_dt range is April 2012, 2012 MAY & JUN 2012. Thus, according to data from the sample I posted, Mark, where his elg_code record is ' ', his eff_dt is 01/01/2011 and April 2012 (30/04/2012) is his exp_dt. Range of the brand statement may 2012, but not MAY or JUNE of 2012. Marty would tally for the APR and MAY because his eff_dt is before MAY 2012 and his exp to MAY 2012. etc...

According to the data below, the results should resemble:

APR MAY JUN
4-3-2

APR should have FRANK, MARK, MARTY, MARY.
MAY should have FRANK, MARTY, MARY
JUN should have FRANK and MARIE

NOAM and JOHN should not appear as his records with elg_code ' ' have no documents eff_dt and exp_dt which are April-June 2012.

So what I tried without success as it appears that I have a kind of Cartesian question (?), is:

Select count (m1.mbr_name) APR,
Count (m2.mbr_name) MAY,
Count (m3.mbr_name) JUN
mbr2 M1,
mbr2 m2,
mbr2 m3
"where m1.eff_dt < ' 01 - may - 2012"
"and m1.exp_dt > ' 01-Apr-2012.
and m1.elg_code = ' '
"and m2.eff_dt < 1 June 2012"
"and m2.exp_dt > ' 01 - may - 2012"
and m2.elg_code = ' '
"and m3.eff_dt < 1 July 2012"
"and m3.exp_dt > 1 June 2012"
and m3.elg_code = ' '

Here's the DML

Thanks for any help!

create table mbr2 (mbr_name varchar (10), varchar (1) grpid eff_dt date, date of exp_dt elg_code varchar (1))
Commit

insert into mbr2 values ('BRAND', 'A', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (April 30, 2012 ',' DD-MM-YYYY '), ' ')
insert into mbr2 values ('BRAND', 'A', to_date (May 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY '), 'C')

insert into mbr2 values ('MARTY', 'A', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (May 31, 2012 ',' DD-MM-YYYY '), ' ')
insert into mbr2 values ('MARTY', 'A', to_date (June 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY '), 'C')

insert into mbr2 values ('FRANK', 'B', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (June 30, 2012 ',' DD-MM-YYYY '), ' ')
insert into mbr2 values ('FRANK', 'B', to_date (July 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY ""), 'C')

insert into mbr2 values ('MARY', 'B', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (June 30, 2012 ',' DD-MM-YYYY '), ' ')
insert into mbr2 values ('MARY', 'B', to_date (July 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY ""), 'C')

insert into mbr2 values ('JOHN', 'C', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (July 1, 2011 ',' DD-MM-YYYY '), ' ')
insert into mbr2 values ('JOHN', 'C', to_date (July 1, 2011 ',' DD-MM-YYYY '), to_date (1 January 2012 ',' DD-MM-YYYY ""), 'C')

insert into mbr2 values ("NOAM" 'd', to_date (July 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY '), ' ' ")

Commit
This gives you a report for the current month and the two front. Column header must be adjusted ;-)
```
select
  count(
  case
  when
    eff_dt < add_months(trunc(sysdate,'MM'), -1)
    and
    exp_dt >= add_months(trunc(sysdate,'MM'), -2)
  then 1
  end) April
, count(
  case
  when
    eff_dt < add_months(trunc(sysdate,'MM'), 0)
    and
    exp_dt >= add_months(trunc(sysdate,'MM'), -1)
  then 1
  end) May
, count(
  case
  when
    eff_dt < add_months(trunc(sysdate,'MM'), 1)
    and
    exp_dt >= add_months(trunc(sysdate,'MM'), 0)
  then 1
  end) June
from mbr2
where
elg_code = ' '
and
eff_dt < add_months(trunc(sysdate,'MM'), 1)
and
exp_dt >= add_months(trunc(sysdate,'MM'), -2)

APRIL     MAY     JUNE
4     3     2
```

On the date ranges in search of oracle forms
I use service number, name, type person and date as search criteria in the custom form ranges.
When I enter the employee number, press the search button, I get the exact info in the block of result.
Result block contains
name of the employee, personid, emp numbed, org, start_date.
Similarly when I enter the employee number, dept, I get the correct values.
My question is, when I enter the date range. IAM unable to filter the data.
When I enter START_DATE between nvl(:BLOCKNAME.) Start_date, 1 January 1901 ') and nvl(:BLOCKNAME.) End_date, 31-DEC-4712') where block clause in the result. I had data for the range of dates also.

If I give condition in where clause results take so long when I search with the name of the employee, number, dept, person type.

If I have a query with the date, the persormance is good.

Think you know everything, how it prevents START_DATE between nvl(:BLOCKNAME.) Start_date, 1 January 1901 ') and nvl(:BLOCKNAME.) End_date, 31-DEC-4712') when look us with the employee's name, number, dept, person type.
So leave the WHERE clause of your empty block and put something like the following in your search button:
```
IF    :BLOCK.START_DATE IS NOT NULL
   OR :BLOCK.END_DATE IS NOT NULL THEN
  SET_BLOCK_PROPERTY('YOURBLOCK', ONETIME_WHERE, 'START_DATE between nvl(:BLOCKNAME.START_DATE,TO_DATE(''01-JAN-1901'', ''DD-MON-YYYY'')) and nvl(:BLOCKNAME.END_DATE,TO_DATE(''31-DEC-4712'', ''DD-MON-YYYY''))');
END IF;
```

AMOUNT of Oracle with the date range

Hello community,

I'm having a problem with the addition of a field with a date range. It comes to my table

JVREF	VARCHAR2	10	-	-	-	-	-	-
SOURCE	VARCHAR2	2	-	-	-	-	-	-
PERIOD	VARCHAR2	6	-	-	-	-	-	-
JVDATE	NUMBER	-	38	0	-	Nullable	-	-
GLCODE	VARCHAR2	24	-	-	-	-	-	-
DESCR	VARCHAR2	40	-	-	-	Nullable	-	-
AMOUNT_0	FLOAT	48	48	-	-	Nullable	-	-
AMOUNT_1	FLOAT	48	48	-	-	Nullable	-	-
JVTYPE	VARCHAR2	4

and I'm glad the the following statement works as expected

SELECT AMOUNT_1 FROM 'TABLE' where

TO_DATE ("PERIOD, ' YYYYMM") > = to_date ("'201501 ',' YYYYMM")

and

TO_DATE (PERIOD, 'YYYYMM') < = to_date ("'201502 ',' YYYYMM");

E.g.

AMOUNT_1

56192.48

59863.57

48570.1

72407.12

21626.96

35532.96

75860.67

25623.62

54799.83

16872.3

The next thing I want to do is the sum of these amounts... so I changed my statement to become

SELECT SUM (AMOUNT_1) 'TABLE' where

TO_DATE ("PERIOD, ' YYYYMM") > = to_date ("'201501 ',' YYYYMM")

and

TO_DATE (PERIOD, 'YYYYMM') < = to_date ("'201502 ',' YYYYMM");

and now I'm getting

ORA-01841: (full) year must be between-4713 and 9999 and not 0

I also tried

SELECT THE PERIOD (AMOUNT_1) SUM OF "BRE". "' OPW_NMLTRX ' where

TO_DATE ("PERIOD, ' YYYYMM") > = to_date ("'201501 ',' YYYYMM")

and

TO_DATE (PERIOD, 'YYYYMM') < = to_date ("'201502 ',' YYYYMM")

Group by PERIOD

with the same results... I can't figure out what I should do next?

Thank you.

Hello

Solomon Yakobson says:

Question:

SELECT *.

From your_table

WHERE the TO_NUMBER (SUBSTR (PERIOD, 1, 4)) NO BETWEEN-4713 and 9999

OR TO_NUMBER (SUBSTR (PERIOD, 1, 4)) = 0

/

To find the offending rows.

SY.

This can cause other errors, according to what is in this column. A better way would be something like:

Primary_key SELECT, period - add more columns you want

'TABLE' - avoid names which need quotation marks

(Period WHERE the TRANSLATION)

'012345678'

'999999999'

) <> = "999999"

OR SUBSTR (period, 1, 4), not BETWEEN "1900" AND "2099"

OR SUBSTR (period 5) NOT BETWEEN '01' to '12'

;

Now there may be errors of conversion, because there is no conversion.

How to add between a date range + category

I use numbers 3.6.2 on a macbook pro with El Captain 10.11.5

I have a financial spreadsheet that I want to shoot the numbers a second sheet that has a book running. Ideally, I would like to have a book current running year round. I can't figure out how to write a SUMIFS formula. For example, I want the cell to add the numbers between 1 August and 31 August which are "local contributions.

Then, I'll have another column for September and I want the cell to make all contributions local between 1 September and 30 September... etc.

Thanks in advance. I hope I explained it well enough.

Hi zaphron,

How is your document organized?

I see a few possible sticking points and have some questions about the entire organization.

Column D of low table contains three types of data: text time values ('Dates', ' Check # ") and numbers.

Pick-up points are not dated.

Some categories are listed in column A, others in column B in the summary table, which complicates the construction of the status of the category.

1st row seems to contain a single merged cell. Numbers doesn't handle well merged cells and general advice in this forum was to avoid if possible.

On the upper table (summary), the cells containing the month and year appear to contain values of time, put in shape to show only the month and year. If so, the values in these cells can be used to compare with the dates in column D of the overall picture as one of the conditions SUMIFS.

How many times the third tab/sheet is duplicated to create a new worksheet "power book"? (The label in line 1 of table book suggests it happens once a month, with a new race of ledger sheet (and table) for each calendar month).

Are there duplicate names in the categories for items of products and expenses? (for example. 'Various')

The General form of SUMIFS by category, date or after, dates before three conditions is as follows:

SUMIFS (sum of the values, test values, condition, test values, condition, test values, condition)

For arrays. the formula in the column of June 2016 of the summary table, then filled to the bottom, would be:

SUMIFS (RL::TI: $H, RL::TI: $F, "="& $A and $B, RL::TI: $D, "> =" & I$ 1, RL::TI: $D, "<" & EOMONTH(A1,0) will GET (I$ 1.0) + 1)

To compact the formula for display here, I used only initials for names of journal and the Table where they are needed. Replace with the actual names of the sheet and the table in each case.

RL = accounting running

T1 = 1 Table

I have$ 1 is the address of the cell (I1) on the summary table containing the Date/time value June 1, 2016 00:00:00 (entered and displayed as June 16).

$ is the operator of absolute reference, which retains all the column references (with the exception of 'I') locked when columns are added to the summary table and the part of the line of the I2 (eye-2) reference fixed rank 1, the formula is filled down his spine.

EOMONTH(A1,0) will GET (I$ 1.0) + 1 calculates the value of time of the last day of the month in I1 and adds a day.

The formula has not been tested, but should work on the income of the values is the table indicated in your post and return 0 results (or error triangles) for categories of lines until the dates are given in these lines in column D of the running of the expenditure accounting table.

Please click once on the triangles of error to display the message and report to those in a response.

Kind regards

Barry

Conditional formatting depends on the date ranges

Basically, I want to be able to enter a date in column A and a sum of money in the B column, depending on where the date in column A grave in a date range, I want the money in column B to copy to a corresponding column. Is this possible? The only questions I found on here deal in a conditional formatting with dates have to do with derivative.

Thank you

Julio

I hope this help to clarify for you...

It is not bringing conditional formatting. Formatting conditional would change the format of a cell (or cells)... as the font, color, size, color cell background, or other formatting character is tics of a cell based on the contents of the cell

You ask about including of the value of a cel another beach under certain conditions

Here is an example:

The first three rows are header lines.

You must enter a valid date for the towing job. Using the format "mm/dd/yyyy".

C4 = IF (AND (DATEVALUE (A4) ≥DATEVALUE($B$1), DATEVALUE (A4) ≤DATEVALUE($B$2)), B4, "")

It's shorthand dethrone select cell C4, and type (or copy and paste it here) the formula:

= IF (AND (DATEVALUE (A4) ≥DATEVALUE($B$1), DATEVALUE (A4) ≤DATEVALUE($B$2)), B4, "")

Select the cell C4, copy

Select cells C4 at the end of the C column, paste

The smart Albums based on the date range cause app Crash Photos

While I'm setting up a new Smart Album based on day of photos between 12/01/2015 and 31/12/2015 the Photos app closes with a crash. Cannot set the second date (the end date for this album). However, I can easily create a new Smart Album for next month (01/01/2016 and 01/31/2016). I create smart Albums, because the new Photos app does not like the old iPhoto does with my Photos from the photo gallery.

How can I solve this? I don't have an album of December...? !

You are in an area where the date format is different from the United States? Earlier this year, we have seen small business issues have reported that rules for smart albums date range do not work with the primary language set to French or German.

Try to change the primary system language to English with an English date format. Photos could be trying to read the 12/31/2015 as the 12th day of the month 31.

Or use a different date based on 'before' rule and after.

Add to the data model

I know that you can add to a data model to help
```
myDataModel.append(data)
```
Is there an equivalent of the function to add data to the beggening of a data model?

myDataModel.insert (0, data)

To ignore the date ranges that overlap

Hi guys,.
I have the tables below
Periods
START_DATE END_DATE ID
30-SEP-05 13 OCTOBER 05 1
12 OCTOBER 05 14 NOVEMBER 05 2
15 NOVEMBER 05 15 DECEMBER 05 3
T1
DAT_COL ID AMOUNT
11 OCTOBER 05 1 10
12 OCTOBER 05 1 10
16 NOVEMBER 05 1 10
I need to ignore the remaining date range if it overlaps when comparing dat_col from T1 between the dates of beginning and end of periods table. Always need to consider the first periods
output something like this
ID ID_1 START_DATE END_DATE DAT_COL
1 1 30-SEP-05 13 OCTOBER 05 11 OCTOBER 05
1 1 30-SEP-05 13 OCTOBER 05 12 OCTOBER 05
1 3 15 NOVEMBER 05 15 DECEMBER 05 16 NOVEMBER 05
I use query
Select a.id, b.id, b.start_date, b.end_Date, a.DAT_COL from T1 a, (select id, start_date, end_date periods) b
where a.dat_col between b.start_Date and b.end_Date
Group of a.id, b.id, b.start_date, b.end_Date, a.dat_col
order of b.start_date;
ID ID_1 START_DATE END_DATE DAT_COL
1 1 30-SEP-05 13 OCTOBER 05 11 OCTOBER 05
1 1 30-SEP-05 13 OCTOBER 05 12 OCTOBER 05
1 2 12 OCTOBER 05 14 NOVEMBER 05 12 OCTOBER 05
1 3 15 NOVEMBER 05 15 DECEMBER 05 16 NOVEMBER 05
Test case:
CREATE TABLE 'PERIODS '.
("START_DATE" DATE,
"END_DATE" DATE,
'ID '.
) ;
Insert into periods (start_date, end_date, ID) values (to_date('30-SEP-05','DD-MON-RR'),to_date('13-OCT-05','DD-MON-RR'),1);
Insert into periods (start_date, end_date, ID) values (to_date('12-OCT-05','DD-MON-RR'),to_date('14-NOV-05','DD-MON-RR'),2);
Insert into periods (start_date, end_date, ID) values (to_date('15-NOV-05','DD-MON-RR'),to_date('15-DEC-05','DD-MON-RR'),3);
Insert into T1 (DAT_COL, ID) values (to_date('11-OCT-05','DD-MON-RR'), 1);
Insert into T1 (DAT_COL, ID) values (to_date('12-OCT-05','DD-MON-RR'), 1);
Insert into T1 (DAT_COL, ID) values (to_date('16-NOV-05','DD-MON-RR'), 1);
CREATE TABLE 'T1 '.
(DATE OF THE 'DAT_COL',
'ID '.
);

Hello

If you really want to use something close to what you posted, then you can do it like this:

WITH got_r_num AS

(

SELECT a.id

b.id AS id_1

b.start_date

b.end_date

a.dat_col

, ROW_NUMBER () OVER (PARTITION BY a.id, a.dat_col)

ORDER BY b.start_date, b.end_date

) AS r_num

FROM one t1

, (

SELECT id, start_date, end_date

Periods

) b

WHERE a.dat_col BETWEEN b.start_date

AND b.end_date

GROUP BY a.id, b.end_date, a.dat_col, b.start_date and b.id

)

SELECT id, id_1, start_date, end_date, dat_col

OF got_r_num

WHERE r_num = 1

ORDER BY start_date

;

Note that the WITH clause, that's essentially what you posted in your first post (with the added r_num column) and the main request is essentially the same as in response #1.

But why would you do something like that? View online or GROUP BY allows all. If you remove them, you get the #1 response solution.

Impossible to get Min, Max and median of the values in the date range values
Hello

I had a requirement as to show the data of each charge group of wise men as '< 100' ' 100-199 "" 200-299 "" 300-399 "400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 '"»

With the query be able to get the count between the beach and the total below. But impossible to get the Min and Max values for this range. For example if the County < 100 is 3 then in these 3, the lowest value is need to display in the min. Idem for Max column also.

In the light of the median value on these values.

Thanks in advance.

Requirement is as below:
State < 100 100-199, 200-299 300-399 400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 Min Total median Max
AK 1 2 0 4 1 4 4 35 35 4 1 $25 $85 850 $1,200
AL 0 0 2 27 10 17 35 2 2 35 0 $103 100-$1 500 750

* "QUERY ' * '"

WITH t AS
(SELECT 'AL' State, 12 DUAL FROM VALUE
UNION ALL
SELECT 'AL' State, 67 FROM DUAL VALUE
UNION ALL
SELECT 'AL' State, 23 FROM DUAL VALUE
UNION ALL
SELECT 'AL' State, 12 DUAL FROM VALUE
UNION ALL
SELECT 'AL' State, 12 DUAL FROM VALUE
UNION ALL
SELECT 'AL' State, 78 FROM DUAL VALUE
UNION ALL
SELECT 'AL' State, 34 FROM DUAL VALUE
UNION ALL
SELECT 'AL' State, 4 DUAL FROM VALUE
UNION ALL
SELECT 'AL' State, 12 DUAL FROM VALUE
UNION ALL
SELECT 'AL' State, 15 VALUE FROM DUAL
UNION ALL
SELECT "AZ" State, FROM DUAL VALUE 6
UNION ALL
SELECT "AZ" State, 123 FROM DUAL VALUE
UNION ALL
SELECT "AZ" State, 123 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 23 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 120 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 456 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 11 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 24 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 34 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 87 DUAL FROM VALUE
UNION ALL
SELECT 'MY' State, 23 FROM DUAL VALUE
UNION ALL
SELECT 'MY' State, 234 DUAL FROM VALUE
UNION ALL
SELECT 'MY' State, 789 FROM DUAL VALUE
UNION ALL
SELECT "HD" State, VALUE FROM DUAL 54321).
-End of test data
AS T1
(SELECT State,
NVL (COUNT (DECODE (VALUE, 0, 0)), 0) '< 100 ',.
NVL (COUNT (DECODE (VALUE, 1, 1)), 0) '100-199.
NVL (COUNT (DECODE (VALUE, 2, 2)), 0) '200-299.
NVL (COUNT (DECODE (VALUE, 3, 3)), 0) '300-399.
NVL (COUNT (DECODE (VALUE, 4, 4)), 0) '400-499.
NVL (COUNT (DECODE (VALUE, 5, 5)), 0) '500-599,'
NVL (COUNT (DECODE (VALUE, 6, 6)), 0) '600-699.
NVL (COUNT (DECODE (VALUE, 7, 7)), 0) '700-799.
NVL (COUNT (DECODE (VALUE, 8, 8)), 0) '800-899.
NVL (COUNT (DECODE (VALUE, 9, 9)), 0) '900-999. "
NVL (COUNT (DECODE (VALUE, 10, 10)), 0) ' > = 1000.
(SELECT STATE,
CASE
WHAT VALUE < 100 THEN 0
WHAT A VALUE BETWEEN 100 AND 199 THEN 1
WHAT VALUE BETWEEN 200 AND 299, THEN 2
WHAT VALUE BETWEEN 300 AND 399 THEN 3
WHAT VALUE BETWEEN 400 AND 499 THEN 4
WHAT VALUE BETWEEN 500 AND 599 5 THEN
WHAT VALUE BETWEEN 600 AND 699 6 THEN
WHAT VALUE BETWEEN 700 AND 799 THEN 7
WHAT VALUE BETWEEN 800 AND 899 8 THEN
WHAT VALUE FROM 900 TO 999 9 THEN
WHAT VALUE > = 10 THEN 1000
END
VALUE
T)
GROUP BY State)
SELECTION STATE,
"< 100."
"100-199.
"200 299",
"300-399.
"400-499.
'500-599,'
"600-699.
"700-799.
"800-899.
"900-999."
"> = 1000."
'< 100 '.
+ "100-199.
+ "200-299.
+ '300-399.
+ '400-499.
+ "500-599.
+ '600-699.
+ "700-799.
+ "800-899.
+ '900-999 ".
+ ' > = 1000.
in total,.
less ("< 100",)
"100-199.
"200 299",
"300-399.
"400-499.
'500-599,'
"600-699.
"700-799.
"800-899.
"900-999."
("> = 1000 ') min_val,.
largest ("< 100",)
"100-199.
"200 299",
"300-399.
"400-499.
'500-599,'
"600-699.
"700-799.
"800-899.
"900-999."
("> = 1000 ') max_val
FROM t1
/
Why not keep it simple?
```
WITH t AS
(SELECT 'AL' state, 12 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 67 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 23 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 12 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 12 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 78 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 34 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 4 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 12 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 15 VALUE FROM DUAL
UNION ALL
SELECT 'AZ' state, 6 VALUE FROM DUAL
UNION ALL
SELECT 'AZ' state, 123 VALUE FROM DUAL
UNION ALL
SELECT 'AZ' state, 123 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 23 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 120 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 456 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 11 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 24 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 34 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 87 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 23 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 234 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 789 VALUE FROM DUAL
UNION ALL
SELECT 'MH' state, 54321 VALUE FROM DUAL)
SELECT state
     , NVL( COUNT( case when VALUE < 100 then 0 end ), 0 ) "<100"
     , NVL( COUNT( case when VALUE between 100 and 199 then 0 end ), 0 ) "100-199"
     , NVL( COUNT( case when VALUE between 200 and 299 then 0 end ), 0 ) "200-299"
     , NVL( COUNT( case when VALUE between 300 and 399 then 0 end ), 0 ) "300-399"
     , NVL( COUNT( case when VALUE between 400 and 499 then 0 end ), 0 ) "400-499"
     , NVL( COUNT( case when VALUE between 500 and 599 then 0 end ), 0 ) "500-599"
     , NVL( COUNT( case when VALUE between 600 and 699 then 0 end ), 0 ) "600-699"
     , NVL( COUNT( case when VALUE between 700 and 799 then 0 end ), 0 ) "700-799"
     , NVL( COUNT( case when VALUE between 800 and 899 then 0 end ), 0 ) "800-899"
     , NVL( COUNT( case when VALUE between 900 and 999 then 0 end ), 0 ) "900-999"
     , NVL( COUNT( case when VALUE >= 1000 then 0 end ), 0 ) ">=100"
     , count( value ) "total"
     , min( VALUE ) "min"
     , max( VALUE ) "max"
     , avg( VALUE ) "avg"
     , median( value ) "median"
from t
group by state
```

How to pass the date range as in URL filter go
Hello

I am trying to build a Url go that has two filters, date range & text. I built the url below, but he continues to throw an error. The url is not from the date max and the app starts following error:

Error: Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 46048] Month DateTime value 0 0000-00-00 is off limits. (HY000)

Go to Url: https:companyUrl? GB & Options = rfd & Path = / shared/CompanyID/link & P0 = 2 & P1 = eq & P2=CustomObject4.%22Indexed%20Pick%201%22 & P3 = Leasing & bet = P4 & P5 = ""-CustomObject4 Custom Attributes '. " ZDate_26 & P6 = 2 + Date % 20'2014-08-01'+ day % 20'2014-12-31'

Please suggest.

Thank you
Kiran.
It seems that you convert the data type of char to date in the URL, I don't think that this is possible.
Your code is like
& P6 = 2 + Date % 20'2014-08-01'+ day % 20'2014-12-31'

It suppose to be & P6 = 2 + 2014-08-01 + 2014-12-31

I suggest doing the formatting for this filed using column properties and try.

Hope this help, pls mark if yes ;)

Registration form of timesheet that auto-remplit the date ranges?

I currently have a need to add a "picker of the week' drop-down menu above my table & ColdFusion form as:
-When the week is selected in the dropdown menu, (how to generate these values in list dropdown weeks?)
-the correct dates are added to the date in the form fields... (how to fill the text boxes)
-Once the user chooses the week, update Sun - Sat dates, so he spends his time for each day...
-Choose the week-> Nov 3 thru Nov 9 <--(menu déroulant)
Sun---Mon---Tue---Wed---Thu---Fri---Sat (static labels)
---------------------------------------
11/03/11 04 11/05 11/06 11/07 11/08 11/09 (text boxes to dynamic dates)
0 8 8 8 8 8 (text boxes to the entrance of the hours)
Here is an example image of what I'm trying to reproduce roughly:
------------------------------------------------------------------------------
Note: This message of the UDF by Ben Nadel looks promising: ldFusion.htm http://www.bennadel.com/blog/719-Ask-Ben-Getting-The-Date-Based-On-The-Year-And-Week-In-Co

OK, here's my current page until now:

-With the help of this calendar weekly jq: http://jsfiddle.net/manishma/AVZJh/light/ I am able to select the week and have it update of my 'start the end thru' dates of text boxes.

- But how to upgrade the JavaScript (code below) to "fill" the week column headers (highlighted in yellow) also with mm/dd?

-Finally, I don't know how to make the INSERT SQL through three rows of data (highlighted in yellow)?

Here are my updated code to fill in the tags with the dates:
------------------------------------------------------------------------

And then I used in my HTML page:

-------------------------------------------

Type Mon Tue Wed Thu Fri Sat Sun Totals Description

Post edited by: jlig

Recover data to leave the date range Table
Hi all

We leave detail table for each employee contains information of beach to leave as follows.
EmpID, leaveFromDt, leaveToDt

We must identify no.. sheets for each employee from the date of the day & current date + group 2 weeks per each week.

If data should look like,

Name of the EMP of leaves
Week 1 semaine2
0 5 emp1
3 2 EMP2

How can this be achieved?

Here are the possible scenarios assuming
Date of the day = 10 may 2012
Current date plus 2 weeks is 24 may 2012

(1) absent from = 20 may 2012
Missing = may 25, 2012

(2) absent from = May 16, 2012
Missing = may 20, 2012

(3) = 6 may 2012 absent
Absent to = 30 may 2012

(4) missing = may 8, 2012
Absent in = 12 may 2012
Hello

The preliminary motion should be changed to the definitions of the new week.

The main request must add the number of days, rather than counting sheets.
To include employees who did not leave during these 2 weeks, you should do an outer join:
```
WITH     got_weeks     AS
(
     SELECT     1 AS week_num, TRUNC (SYSDATE) AS from_dt, TRUNC (SYSDATE) + 6 AS to_dt          FROM dual     UNION ALL
     SELECT     2,               TRUNC (SYSDATE) + 7,        TRUNC (SYSDATE) + 13             FROM dual
)
SELECT       e.emp_id
,      SUM ( CASE
                WHEN w.week_num = 1
                    THEN 1 + LEAST    (w.to_dt,   e.leave_to_dt)
                    - GREATEST (w.from_dt, e.leave_from_dt)
             ELSE 0
            END
          )          AS &week_1
,      SUM ( CASE
                WHEN w.week_num = 2
                    THEN 1 + LEAST    (w.to_dt,   e.leave_to_dt)
                    - GREATEST (w.from_dt, e.leave_from_dt)
             ELSE 0
            END
          )          AS &week_1
FROM              empleavedtls        e
LEFT OUTER JOIN       got_weeks        w  ON   w.from_dt     <= e.leave_to_dt
                       AND  w.to_dt     >= e.leave_from_dt
GROUP BY  e.emp_id
ORDER BY  e.emp_id
;
```
Instead to make 2 essentially the same CASE expressions, with FEWER and more calculations in each of them, you could do that once, in a subquery, and then, since you have Oracle 11, you can use SELECT... PIVOT function to get the totals in two columns. This would make it easier to add additional weeks. This is another good exercise.

START_DATE	END_DATE	ID
30-SEP-05	13 OCTOBER 05	1
12 OCTOBER 05	14 NOVEMBER 05	2
15 NOVEMBER 05	15 DECEMBER 05	3

DAT_COL	ID	AMOUNT
11 OCTOBER 05	1	10
12 OCTOBER 05	1	10
16 NOVEMBER 05	1	10

ID	ID_1	START_DATE	END_DATE	DAT_COL
1	1	30-SEP-05	13 OCTOBER 05	11 OCTOBER 05
1	1	30-SEP-05	13 OCTOBER 05	12 OCTOBER 05

1	3	15 NOVEMBER 05	15 DECEMBER 05	16 NOVEMBER 05

Add automatically the dates in a date range

Similar Questions

Maybe you are looking for