To change the existing HFR report

Hi all

I have a requirement to add a column field in an existing report, but I can't find the option to edit the report (presentation of Dimension). In fact, the existing report to the column field contains the period dimension, if I want to add a dimension of the year in the area of the column, how can we change the ratio.

Please suggest.

Kind regards
Sanjeev

Published by: reachsubbiah on October 6, 2011 03:08

Hi John,.

Looks like you already know how to do, but just not could find the dimension diagram? To view the layout of dimension, click on the little button on the upper left corner of your grid. This will highlight all thw grid and her you can see the properties of the grid on the left side of your grill. The layout of dimension is displayed below the properties grid. Click it, and then drag the year columns. This will bring the year less or greater than period. Let me know if you have any questions.

See you soon,.
Mehmet

Tags: Business Intelligence

Similar Questions

  • How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

    How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

    These page numbers were initially created using Acrobat PDF header and footer.

    I have a 750 page pdf document that I've created.

    I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

    But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

    I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

    So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

    A way to remove these page numbers already there and add new page numbers.

    Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

    My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

    If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

    Thank you for your review and response.

    You should be able to update with tools - Pages - header & foot-

    Update... It not work for you?

    If this isn't the case, then try to remove from this menu and then re - adding them.

    Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

  • Problem changing the database of reports of HFM

    Hi, I have currently two applications in HFM, one is for the development and the other for testing

    I have several reports in my application dev., and I'm trying to use them in the test application.

    I followed the manual instructions on how to change the connection of database reports using the tools-> menu change the database connection on the workspace.

    I managed to most of the cases, but 4 reports throw a warning that says ArrayIndexOutOfBounds that blocks the process of "migration."

    Could someone help me with this one?

    Thank you

    I hate to say it, but I have a lot of problems with that too. Sometimes it does not give an error, but it does not work. My solution is to change the connection of database outside the workspace and re-import them manually. In particular, this makes the most sense if you have a quantity in bulk of reports to work with. (i.e., I have a new app and I want to import a group of reports to run against it).

    As I do this is to use a text search and replace tool and replace the existing information in the database with the new information.

    I've posted a text on how to do it here.

    I'll see if I can find it and I will update this post with a link.

    Edit: Link is here: Re: migration of HFM, FDM, SS one env to another

    Look at my notes of the workspace as I speak to you of migration related to a different environment that has the idea of Basic.

    Thank you

    Published by: beyerch2 on August 25, 2011 14:52

  • Help - profile change Service models and policies without changing the existing MAC or WWN vNIC and vHBAs

    Hello

    I would like to know if there is a way to preserve existing vNIC MACs and WWN vHBA if I change the model of a Service profile?

    To clarify, our Service profiles have been created since an initial model, and now we'd like as these Service profiles to point to a - model - update to simplify management.

    Initial-template originally provided manually created vNIC and vHBAs and used no LAN or SAN connectivity political, but the new updated model made.

    VNIC names and vHBA names, as well as the MAC and WWN used in connectivity pools policies update-model are the same as those currently used by the Service profiles.

    To rephrase the question:
    Is it possible to change initial-model a Service profile to a template update with essentially the same everything, without changing the UUID currently in use MACs of the profile Service, WWN and perhaps?
    If the answer is that they are not the same when this happens, then someone know of any workaround?

    Thanks for your help!

    RR

    Hi RR

    With respect to the Central of the UCS and sequential allocation:

    https://supportforums.Cisco.com/discussion/12006286/UCS-Central-sequenti...

    http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/release/notes...
    New features in version 1.1(2a)
     
    Allocation of ID sequential for pools, such as addresses MAC, WWN, IP and UUID

    The procedure I would use:

    -Create the update model

    -remove the link 1. Initial model EP

    -delete this 1. SP (this helps to release all the values in the pool)

    -create new MS to model update (it will inherit above pool values)

    -Repeat for all AOCS

    I did this several times without problem (for example, no need to change the zoning of FC). Of course it is disruptive, by blade and SP.

    Don't know if this unbind / bind procedure works without reserves.

    See you soon

    Walter.

  • prevent the user to change the color of report and highlight

    I used 5 APEX

    After matches the report as shown below


    I need prevent the user to change or remove the color & saved report

    Concerning

    Hello Rara,

    I don't know if there is an option how to remove just cancel 'X' button/image filter defined/facts highlights. Maybe some gurus should help.

    You can remove just 'X' next to point culminating with inspect the attributes of the button and set the attribute for visibility for it.

    In my case:

    button[data-highlight-id] {
        visibility: hidden !important;
    }
    

    You can see the demo on:

    https://Apex.Oracle.com/pls/Apex/f?p=16502:

    Demo/demo

    TAB: Refresh IR 5.0 Plugin

    Concerning

    J

  • Change the existing title text

    How can I (highlight and) change the text of an existing title? Thanks, George

    Try to reset your current workspace, while the Titler window is not open.

    ALT-SHIFT-0 resets the current workspace. That could bring your tools. You may have accidentally dragged away.

  • change the existing text

    Hello.. I don't know if this has been answered before, and if there I'm sorry to ask again... am really new to illustrator and was hoping to find out if it was somehow possible to change the text in an existing .ai file... I had asked someone to create a logo for me using Adobe Illustrator, and he did a great job, but has made a few spelling errors in the text of the logo... How can I change this? Thanks in advance...

    Yes.

  • Change the shape with report

    HelloW,


    I did an empty page and added a report with the form.
    So when I click the button change in the report, I can change the values in the form above.
    It all works, it's just I want the values appear in the ratio and lov groups.
    But I can only change the types of fields in the report.


    Change the Type of Code Naam Actief Soort

    EEF nuuf O F Y
    Jaja jaja O T N

    = an example of my report.
    o = lov
    F, T is lov
    Y, N = ratio group


    How can I change them?
    Ive found a great example of how it should be
    http://Apex.Oracle.com/pls/OTN/f?p=31517:242:222281824948144:FETCH_ROW:no:P242_EMPNO:19109


    Thank you

    Mathias

    + "But I can only change the types of fields in the report +?

    You can also change the form field types. Just go to the Page of form and change. LOV (Select Lists) and Radio groups, however, require a definition LOV dynamic or static.

  • How to change the existing settings of the source for the container system

    Hello

    Cannot change settings in the system container (Oracle 11.5.10) source source.

    Please guide me how to change the settings.

    Thank you and best regards,
    Partha.

    Partha, you should not change the current container. Create a new container by copying the existing container and make any changes required in the present.

  • How to change the existing terminals 'view as an icon' to view data by program type

    I had a few LabVIEW code inherited from someone else. And there are tons of existing terminals, displayed as an icon. Is it possible to batch process to change all of display them as data type?

    Thank you very much!

    I created a VI that changes all that.

    Run the VI.  Go to any block diagram you want to disable the view as icons setting.  Then click on the button in this VI.

    I also created a version using the right-click framework, but I don't have access to the computer that has this code at this time.

  • How to change the existing text of a model?

    Hello everyone, Im new to photoshop and I check a lot of things here and there, just wondering how to edit a text from an existing template? I downloaded a model and Im pressing the tool t then Im clicking the text I want to change but he used to Exchange and only adds a new layer of text? Help!

    You click the box bad you clicked outside the T text icon in the box that opens the layer style dialog.  Try to click the T icon in the text to change layer which is found in the layer in the layers palette.

  • Is it possible to change the Type of report?

    Hi all

    I sent a request for my Localhost to the server. The two versions are different is 3.0 (LocalHost) and the other is 3.1 (Server).

    I have a report page that is of type report I want as his InteractiveReport type that is the new option available to the point 3.1.
    The problem is that I am not able to change through the user interface.

    so is it possible to change via the back-end?

    Looks like you need a alias column for the 1st column in your query.

    Try changing this line:

    select APEX_ITEM.RADIOGROUP (1,r.ID,null,null,null,null,'test1(' || r.ID ||')'),
    

    To something like this:

    select APEX_ITEM.RADIOGROUP (1,r.ID,null,null,null,null,'test1(' || r.ID ||')') id,
    

    Thank you

    -Scott-

  • How to change the existing ESD?

    Hi all

    We work with a structured customer FM12 files we need to update. Files have been created with Framemaker and everything works fine with the format rules.


    There is only one problem we have to solve: a title goes on and we need to write it on 2 lines instead of 1 before. But when the last words of the title go to the second line, it is not centered but goes to the left. Is it possible to fix this?

    I tried 'Display Designer' in 'Show element of context', but a message appears and says that I must first select a tag format from the list of 'Rules of Format' selection. I tried with every line that I could find in the rules for Format selection list, but the message keeps appearing.

    Also, I tried to open the EDD to change rules directly into it, but I have no idea on where to find this ESD (which must be a place that I can see the format rules and such that they are applied). Is there a way to find this ESD? Sorry if this sounds like a stupid question, but I'm a newbie to the structured FM.

    Thank you very much for your help and have a nice day!

    Hello

    A DSP lives inside each structured document. Each document has its own copy which is completely independent of any other document. You can export a copy with StructureTools > Export item Catalog as EDD. You can import a DSP with file > import > definitions of element, which completely replaces the current internal ESD.

    It is important to note that the formatting can be controlled by a DSP, the document model, or a combination of both. According to the State of mind of the architect and the size of ESD, it can be difficult to deconstruct.

    Russ

  • How to change the existing customization specification?

    I have a few specifications of customization that I created all by deploying the vm model.

    Is it possible to edit this specification with some editor?

    Thank you

    You can change in the specification of customization Manager console. Right-click and select Edit.

    Also, you can import files of responses in xml format to use as customization specification. Never used editors for answers sysprep files MS if Google or someone else need VMTN will tell you all about them.

  • "BOLD" in the PDF HFR reports

    Text in the cell is not displayed in bold when reports are open in PDF format.  Cells are defined as "BOLD" in the report editor and appear in bold only when opening on the web.  Currently, using v11.1.2.2.

    Problem in known 11.1.2.2, this problem has been resolved in 11.1.2.3 financial information.

    Workaround solution:

    1. Microsoft Web site download and install MS fonts reference without Serif Bold.
    2. Print server Financial Reporting find and open in the editor text file xdo.cfg.
    3. Add the following to xdo.cfg:



    4. Save the modified file.

    Reference: Financial Reporting overview PDF does not display text in bold. [1558909.1 ID] MOS.

    HTH-

    Jasmine.

Maybe you are looking for

  • Safari inserts space when you enter the user name

    When I go to a Web site that requires a connection and enter my username (which is my name) the browser automatically inserts a space between the first name and family name which causes the connection fails. How can I stop this from happening? It is

  • ENVY of HP dv7: copy the file fails error on disk 2 to 58% HP recovery

    My hard drive in my dv7 ENVY dies for the second time in two years (it was under warranty last time and I was able to fix). I bought the hard drive same exact (Samsung, 1 TB), tested in BIOS, past everything. When I try to make the image recovery wit

  • Compaq CQ58: I forgot the password to power Compaq CQ58

    I just bought a Compaq CQ58 of a pawn shop. When I turn on it requires an administrator password or power on password. It did not come with this information, so I Googled it and saw a few different multi number password that has been proposed to type

  • my screen displays the ghosts. I have a blurry screen and each word or a symbol has a ghost effect?

    I have a hazy black line down the left side of the screen and the words or icons have a shadow behind effect after him. the only way I can describe it is that it's like a ghost effect. can anyone offer me some advice. is my monitor going on the blink

  • 3522 cartridge transport will not "open".

    Problem with the initial installation of ink in my printer 3522nd.  Impossible to activate the ink cartridge transport to move left "open" position.  Cart remains on the far right and is inaccessible.  Displays "ink cartridge problem, one or more car