My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

Similar Questions

• Do you know if you can acquire data from a microcontroller that runs under the PLUS + 1 environment, using the NI 9201 platform?

  Hello world

  Do you know if you can acquire data from a microcontroller that runs under the PLUS + 1 environment, using the NI 9201 platform? I need to build a test environment in labview, but entries must be purchased from the microcontroller MC024012 Sauer-Danfoss. The problem is that this microcontroller interface provides the programming amiente MORE + 1 Sauer-Danfoss. Can you help me?

  Thank you

  Elza Figueiredo

  double post and bad advice

• Strange behavior when using Labview to collect data from Tektronix oscilloscope tds8200

  I hit a wall in trying to understand this one. The problem I have is that my application will not start the oscilloscope when it should.

  I use an oscilloscope Tektronix TDS8200. My goal is to collect data from the oscilloscope using Labview waveform. First of all, my program initializes and configures the oscilloscope; This part of the program works very well.

  The second part of the program begins the acquisition of data with the function 'Tktds8k Start or Stop Aquisitions.vi', which is to press the button run on the scope. The function "tktds8k to Waveform.vi" is used and should ideally return data, which I connected to a waveform playback graph.

  When I run my program, the first part runs without a problem, but as soon as the program comes to the service get the waveform, the run button in the scope, which is green when running, turns off; the program then expires, and no data is collected.

  Here is where it gets weird. I went through the debugging to try to understand this point, and I put breakpoints on the beginning and get shape wave functions so that I could scroll through the last part of the program. The program continues with the departure function, and the button run in scope is green. The breakpoint for the function get the waveform is reached and when I press on continue, turns the Run button and turns it off then back on almost immediately. data are collected, the waveform graph appears and the program ends without error.

  I thought that the timetable could be the problem, so I did the program wait as long as five seconds between the functions of start and get the waveform and that did not work. I also tried to move the start function to before the configuration functions and remove start completely; no method worked.

  is there any ideas on why, the program works when I enabled breakpoints and isn't when breakpoints are disabled? I'm sure there is an easy solution, but I was not able to find a solution.

  I have attached a pdf that contains information about the functions of the Oscilloscope (tktds8k.pdf), and I have also attached my program.

  
  

• Collect data from specific frequency of the power spectrum

  Hello

  I want to know how to collect data from specific frequency of power spectrum file. I'm trying to separate data from specific frequency of the original file.

  This will depend on much how your data is stored. You will need a way to read the file in LabVIEW and then a way to identify the data you want. I often record data in a .csv file, then I use "Reading worksheet" to get the data in a table. Then, you can simply use 'Index Array' to get the datapoints you need.

• HAL can extract data from a cube of global storage?

  Hello Experts,
  
  HAL can extract data from a cube of global storage?
  
  
  Kind regards
  
  Sonu

  Hello
  We can extract aso essbase adapter cube.

  Kind regards
  Urupong

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• Can read data from xls using teststand 3.5?

  Hello

  I use 3.5 TestStand and LabVIEW 8.je know these are quite old versions now, but we must continue with this on a test bench.

  My question is how can I read data from the file xls using TestStand 3.5? I have already mentioned a few posts on this, and one response suggested that I should use "tGetExcel" using ActiveX adapter. I tried to run the test example related to "http://forums.ni.com/t5/NI-TestStand/Write-or-read-to-Excel-from-TestStand/td-p/250439/highlight/tru...", but a run-time error. He says that "the tGetExcel type library information not found. Make sure that the server is registered in the system.

  TestStand 4.2, I could easily run excel at the base of operations by using the Office Excel Toolkit.

  I was wondering, is there another way, I can read just .xls file data by using Teststand 3.5?

  Thank you

  Niraj.

  Please check this example for charger of property:

  C:\Program Files (x 86) \National Instruments\TestStand 3.5\Examples\LoadingLimits

  This shows the limits of excel file loading.

  But you can load the values of the variables-consult the help file / Reference manual for this type of step.

  Also in the loader type forum search property - you can find more information.

  I hope this helps.

• The apple store can transfer data to me?

  I intend to share my 5S for a 7 and get the discount immediately. But this means that I have to give them my 5s. They can transfer all the information from my 5s to my 7 in the store? So, I did not add all the books and set up here where I left in one of my apps to read for example... Is this possible to transfer just the same 'soul' in another 'body' with all the same exact preferences? (you know what I mean)

  The store can make the transfer, but they will use iCloud for making a backup of your old phone and then restore to the new. This could take a while depending on the amount of data transferred.

  You have backups of your old appliance before head you to the store. Use iCloud or iTunes on your PC.  You can then restore yourself.

• EPC2203 modem cannot connect to the Mac via USB?

  I searched all threads and you can't find something to solve my problem.

  My ISP sold me the modem Scientific Atlanta EPC2203 cable recently. I can't connect it to my Mac (10.5.7) via ethernet no problem at all. But I can't get a connection via a USB port. The modem operating manual mentions for Mac OS X USB connectivity, but does mention all the details on how to establish the connection: we talk about the installation of PC drivers. Supplied with the modem installation CD only applies to the PC, it seems that I have to take extra steps such as installing a Mac driver? I couldn't find the Mac drivers adapted on internet, then I start to think that this modem is not simply done to connect to the Mac via USB?

  Any help is very appreciated.

  To make your Modem work with USB connectivity, you must install the Modem drivers on your computer. You can try to search for the Drivers that works on the MAC computer or else you can contact the support Tech Atlanta, because they can let you know where you can find the drivers for your Modem. Or well you googled around and you can find the drivers for your Modem which are Compitable MAC.

• B2B is collecting data from the IP_IN_QUEUE

  Hello
  We have 810 process dating to the doc revision number 5010. Although we pass all required header required by B2B settings, then too is not the collection of data from the IP_IN_QUEUE.
  The data is generated from Oracle Apps and passed to SOA that sends data in this B2B Queue.FRom this queue server B2B should choose the data automatically and treat, but this isn't the case.
  We are too ignorant as any error in the logs of B2B.
  Please share your ideas.
  
  Concerning
  AYUSH

  Hi Mary,

  then too is not the collection of data from the IP_IN_QUEUE

  B2B selects data from IP_OUT_QUEUE. Please configure consequence. IP_IN_QUEUE is for incoming messages.

  Kind regards
  Anuj

• We get an error when I try to collect data from vCenter Server. But the Collection of Cluster works!

  Hello

  I m getting a strange errormessage when he tries to load my vCenter Server inventory.

  I have configured my vCenter Server as the endpoint server and I was able to load the Clusters. When I klick collection of data in a Cluster (Cluster of EQL 1) I can load all the data and the State is 'successful', but when I try to load the inventory FRO the vCenter Server (to get the models) im getting this error message:

  The treatment [inventory], error details error: illegal managed object reference type, folder.

  The same schows Agent logs:

  [26.08.2014 16:48:16] [Info]: start: treatment Workitem ID [2e38598e-4385-4b2d-bc88-fd2b773d1f98] [inventory]

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.Admin.Hostname = vCenter

  [26.08.2014 16:48:16] [Debug]: [[inventory]] VirtualMachine.Admin.ParentIdentity = [inventory]

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.ManagementEndpoint.Name = vCenter

  [26.08.2014 16:48:16] [Debug]: [[inventory]] VirtualMachine.ManagementEndpoint.Identity = [inventory]

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.ManagementEndpoint.Endpoint0 = vCenter

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.Admin.Name = inventory

  [26.08.2014 16:48:16] [Error]: <? XML version = "1.0" encoding = "utf-16"? >

  < Boolean > false < / Boolean >

  Error parsing [inventory], details of the error:

  System.ArgumentException: Illegal managed object reference type, folder.

  at DynamicOps.Vrm.Agent.vSphere.VSphereGetHostsRequest.ExecuteImpl)

  at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.GetHosts (ManagementEndpoint managementEndpoint)

  to DynamicOps.Vrm.Agent.Collector'3.get_Hosts)

  to DynamicOps.Vrm.Agent.Collector'3.CollectManagementEndpoints)

  to DynamicOps.Vrm.Agent.CollectInventory'3.Collect)

  to DynamicOps.Vrm.Agent.BaseHypervisorAgent'3.EnumerateHypervisorResources (collector collector 3, WorkItem workItem, PropertyBagHelper propertyBagHelper)

  to DynamicOps.Vrm.Agent.BaseHypervisorAgent'3.ProcessWorkitem (WorkItem workItem, task of the chain, PropertyBagHelper propertyBag)

  to DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.ProcessWorkitem (WorkItem workItem, task of the chain, PropertyBagHelper propertyBag)

  to DynamicOps.Vrm.Agent.BaseAgent.ProcessWorkitem (WorkItem workItem)

  I hope that someone had an idea, im out of ideas.

  THX Steven

  There is no data for the endpoint collection... And I'm not entirely sure of how you added the vCenter object it... y at - it a calculation object named "vCenter? To answer your specific questions about the models, however, they must be stored on a cluster that is part of the tissue group for data collection to pick them up... They are not considered as a global entity (as a resource calculation). Add models to one of the clusters and then to collect data on it, and you should be fine.

• Unable to restart or shut down Windows when a USB modem is connected to the computer

  When I plug a USB modem, either 3 G or dial-up, my computer will restart or shut down. It complements the normal stop the procedure, but instead of actually put back in power, the screen becomes black and stay like that. After a manual stop, Windows reports that he is recovered from a serious error. I have had this problem since I first installed Windows Vista about half a year ago. When there are no modems connected to the computer, it restarts and stops normally. In addition, printers and USB flash drives appear not to cause to happen.

  No idea how I could solve this problem? Thank you.

  Works fine now. Another bug of Microsoft.

• All in a single 228 MS cannot find my router/modem to connect to the internet

  I just replaced the hard drive on my desktop MS 228 All In One. I installed windows 7 Home Edition premium and everything seems ok. The computer displays any internet connection included, even though we have a laptop computer and two tablets
  Connected wireless to our router / modem box. I got this computer connected wireless, until the hard disk is dead. I do not understand why it cannot locate the internet now. I get the message to connect to the computer with a cable, but I need a Wi - Fi connection because the internet area is some 3 meters across the room!
  What should I do for a wireless connection? I must have done a few years ago, when I first installed this computer... but
  Do not remember how I did it... Help please...

  Thank you very much Dunibar, all this work after having followed your instructions... your a star.

  Very much appreciated. What ABOUT James... Maxiboy.

• Where is the peripheral origin obsolete event ID 370 print spooler? Obsolete device can be removed from the operating system?

  I get a recording of event ID 370, about once every four days, what about the EPSON Stylus COLOR 460 printer ESC/P 2. I recognize the device as an old device, which is no longer necessary, that I thought was completely uninstalled years ago and I am slightly surprised to see that the tracks still on the computer, or not, as it appears.

  It is that I don't know if this record event was caused by a device driver package or the registry keys and values? Is the event ID 370 caused by or for both (device driver package / registry values) being obsolete?

  I have the old appliance any longer, so it seems sensible to remove traces of the system and in turn eliminate the causes of event ID 370. However, to find all traces causing the registration of the event? What traces can be removed without problem?

  1 today, this device does not show as a device available in display devices and printers to devices and printers.

  2, I was unable to see a name similar unused volume in trying to remove the old device (when looking faded icons in the branches of the Device Manager with emphasis on -pilot no Plug and Play, other devices, portable devices, Port (COM & LPT), Printers).

  3 reveals regedit there are registry keys and values in the registry that reference naked always at "EPSON" searches for the word. Yes, I have reason to assume that these registry keys and values have caused event ID 370? Is it safe to delete the registry entries, or should the registry key entries to receive new values? (I don't want the deletion of these registry values to cause instability in the print spooler.)

  Event ID 370 Description:
  The print spooler could not regenerate printer driver information for driver Epson Stylus COLOR 460 ESC/P 2 for Windows x 64 environment. Win32 system 2114 error code (0 x 842). This can happen after an upgrade of the operating system or due to loss of data on the hard drive.

  Search for "EPSON" in regedit concludes:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\ {in} {KEY} 13.10.2011, 13:18 HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\
  HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\ {in} {KEY} 13.10.2011, 13:18 HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\
  HKLM\SYSTEM\ControlSet002\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2
  HKLM\SYSTEM\ControlSet003\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2
  HKLM\SYSTEM\ControlSet004\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet004\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2
  HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2

  It seems that traces of information about devices are still present in the registry (invalid entries), which causes the event. Run a registry cleaner will solve this problem, but please visit the following link before continuing:

  http://Windows.Microsoft.com/en-in/Windows/are-registry-cleaners-necessary#1TC=Windows-7

• How many devices can I download from

  How many devices can I download creative cloud on?

  Hi Catherine,

  You can download creative cloud on any number of machines, but you can Activate the license only on 2 machines according to the EULA.

  Licensing and terms of use | Adobe

  Kind regards

  Sheena