To create the new group business with workflow vCO

Similar Questions

• Error in PipelineManager while creating the new group payment

  Hello world

  I am trying to create a new group of payment for the purchase of an item with reward points.  I'm trying to change the flow of the pipeline by substituting commercePipeline.xml.  I added the following lines of code in this XML.

  CommercePipeline. XML

  < pipelinemanager >

  < pipelinechain name = "validatePaymentGroup" >

  < pipelinelink name = "dispatchOnPGType" >

  < transition returnvalue = "5000".

  Link = "validatePointsPG" / >

  < / pipelinelink >

  < name pipelinelink = "validatePointsPG".

  transaction = "TX_MANDATORY" >

  < processor = jndi

  "/ com/mystore/order/processor/ValidatePointsPaymentGroup" / >

  < / pipelinelink >

  < / pipelinechain >

  < pipelinechain

  name = "validatePaymentGroupPreConfirmation" >

  < pipelinelink name = "dispatchOnPGTypePreConfirmation" >

  < transition returnvalue = "5000".

  Link = "validatePointsPGPreConfirmation" / >

  < / pipelinelink >

  < name pipelinelink = "validatePointsPGPreConfirmation".

  transaction = "TX_MANDATORY" >

  < processor = jndi

  "/ com/mystore/order/processor/ValidatePointsPaymentGroup" / >

  < / pipelinelink >

  < / pipelinechain >

  < / pipelinemanager >

  When I start booting the server error below:

  ERROR [nucleusNamespace.] Could not start the service "/ atg/commerce/PipelineManager ': atg.nucleus.ServiceException: CONTAINER: atg.service.pipeline.PipelineInitializationException; Source: ATG.service.Pipeline.TransitionException: A PipelineLink is already mapped to return code [5000] in the pipelink named [dispatchOnPGType].

  When I tried to check the commercepipeline in the Administration of the Dynamo , is to show that the pipelinechain is locked

  CommercePipelineManager

  Pipeline channels

  String ID	Riders of num	Activated	Locked	LockAcquiredTime	LockReleasedTime	LockingThread
  validatePaymentGroup	0	fake	true	Fri Jan 24 10:55:46 IST 2014	N/A	main
  loadOrder	0	true	fake	N/A	Fri Jan 24 10:55:44 IST 2014	N/A
  updateOrder	0	true	fake	N/A	Fri Jan 24 10:55:44 IST 2014	N/A
  processOrder	0	true	fake	N/A	Fri Jan 24 10:55:45 IST 2014	N/A
  validateShippingGroup	0	true	fake	N/A	Fri Jan 24 10:55:46 IST 2014	N/A
  refreshOrder	0	true	fake	N/A	Fri Jan 24 10:55:44 IST 2014	N/A
  processOrderWithReprice	0	true	fake	N/A	Fri Jan 24 10:55:44 IST 2014	N/A
  repriceOrderForInvalidation	0	true	fake	N/A	Fri Jan 24 10:55:44 IST 2014	N/A
  validateForCheckout	0	true	fake	N/A	Fri Jan 24 10:55:45 IST 2014	N/A

  Thank you and best regards,

  RKishore

  you have assigned the return code 5000 in the two strings to your new pipeline link.

  OOTB 5000 is already assigned to charge the chain.

  You must change the return code new value unassigned. Also the return code should be added in return codes provided by dialing ValidatePaymentGroupByType.

  Refer to this: Oracle ATG Web trade - confirmation of order extending to new methods of payment of support

  Thank you

  Nitin.

• I have to create the new group for waiting for redo log files?

  I have 10 group of files redo log with 2 members of each group for my primary database, I need to create new group for redo log files for the database of relief pending

  Group # members

  ==============

  1              2

  2              2

  3             2

  4             2

  5             2

  6             2

  7             2

  8             2

  9             2

  2 of 10

  If so, the following statement is correct? or nto

  ALTER DATABASE ADD STANDBY LOGFILE GROUP 1 ('D:\Databases\epprod\StandbyRedoLog\REDO01.) LOG',D:\Databases\epprod\StandbyRedoLog\REDO01_1.log');

  Please correct me if am doin wrong

  because when I run the statement I have error message saying: the group is already created.

  Thanks John

  I just found the answer

  Yes, it of recomeded to add the new group, for instnace if I have 10 group of 1 to 10, then the wait should be from 11 to 20

  Thanks I found the answer.

• Cannot create the new catalyst business of dreamweaver site using cc 2015...

  I can't create new catalyst business of dreamweaver site using cc 2015, yet on my other computer with the help of 2014 BusinessCatalyst is there, and some of us like things simplistic and without hassle and 2014 version works very well, why adobe take something of simplistic who worked a lot and updated to something that makes me consider to cancel all of my adobe account What's happening on Adobe, which was?

  You think you're getting better assistance in the forum Business Catalyst.

• Unable to create the new group in the address book

  No response when I hit again group

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, let know us and we can move this thread to the queue of Thunderbird. This issue is currently in the queue of Firefox to get answers.

• Service Division of Hyperion - assign the existing group to the new group

  Hi all
  
  In my planning application, I tried to create the new group "G3" through the sharing service and assigned existing groups ("G1", "G2") to the new group "G3". So that all existing group access will be transferred to the new group.
  
  But when I logged with the user of the G3, I found has insufficient access forms data giving the message.
  "You try to open the data form, but can not because all the required dimensions are not present." Possible causes may be that you do have at least one member of a required dimension, or the selection of members resulted in no Member present. Contact your administrator. "
  
  I can able to connect and see the dataform with user group G1 and G2.
  
  What that should I need to change in the settings to avoid this problem?
  
  Thanks in advance

  When you add a G1, G2 to G3 provisioning of g1 and g2 doesn't apply to the g3. Instead, it's the other way around. G1 and G2 will have some G3 has commissioned.

• Created a new group but cannot user of MSN Search

  Hello
  
  I have created the new group, added the desired menu, I can see the form the user research, but when I tried to search ALL or some user is any user (s) found.
  
  All settings or permissions required forthis group?
  
  Thank you very much.

  If you try to search for users, you must ensure that your user is looking has access to the organization.

  Go to organizations to manage, select Organization, select administrators from the drop down and then add the group you want to give in. Then all users in this group can perform searches for users in this organization.

  -Kevin

• create a new virtual machine with the default settings?

  I was wondering if there was a way to create a new virtual machine with the default settings.

  For example, let's say I want all new Lion VM to have 2 CPU cores. Is there a way to set this automatically? There are other parameters I want a new machine to inherit automatically, I was wondering if there is an automatic way to do this, or is it a feature request...

  Thanks in advance

  lerker wrote:

  Just for my clarification, when you say a vm model, basically I would execute a finder copy then drag back to the VM library, right?

  Yes.

  On the orders of spcirpting, it would be unix commands or are there specific vmware controls that make your job easier (in Applications/VMware\ Fusion/content or elsewhere)...

  IIRC, VMware Fusion 3 and later versions has an AppleScript dictionary, but it is not yet officially supported and may not be able to do what you want so, basically, only Unix Shell scripts, that's what I was referring to.  For an example, see my script attached to the following response: Re: vmware - script of the creation of the vm and the operating system installation process

• How to create the new domain with lookup?

  How to create the new domain with list of choices like terrain dDocType system?

  Administration/Admin Applets tab / SCCM / information fields.
  Add field or edit a custom field if you have one.
  The name field (the name will be prefaced with the lowercase letter x behind the scenes, if ever, you write the code to call it if you name this Fruit it will xFruit for code)
  Define your values for the field, but the important thing for a menu drop-down list or list of selection will be to list the Option activate the checkbox.
  Then, you perform one of the 3 main things to put data in the list.
  1. manually fill in a list of options
  2. use a DB or DB table view to view Configuration Manager
  3. create a complex tree (read the documentation on which I him have not used)

  If this does not answer your questions, click the help button in the applet.

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• Create the new virtual machine using Java API vCloud

  Hi guys,.

  I am trying to create the new virtual machine in TIME, but I've stuck here. The API I'm using is vcloud-java-sdk - 1.0.jar.

  Could you please show me a code snippet how to do this?

  For now I do it like this:

  RecomposeVAppParamsType recomposeVAppParamsType = new RecomposeVAppParamsType();

  List the items < CompositionItemParamType > = recomposeVAppParamsType.getItem ();
  ReferenceType vappTemplateVMRef = new ReferenceType();

  // ??? seems that new reference to the new virtual machine should be here. But how to create this VM
  CompositionItemParamType compositionItemParamType = new CompositionItemParamType();
  compositionItemParamType.setSource (vappTemplateVMRef);

  Items.Add (compositionItemParamType);
  ReferenceType vAppRef is Vdc.getVdcByReference (vcloudClient, vdcRef) .getVappRefByName ("vApp_Websrv");.

  Vapp.getVappByReference (vcloudClient, vAppRef) .recomposeVapp (recomposeVAppParamsType);

  One day before I played with Web Services SDK, which is much easier to understand. I was able to create the vApp and VMs in vSphere. Is it possible to import machines virtual vSphere to vCloud? Should what API I use for this?

  Thank you

  Hello

  You cannot add a new empty virtual machine in a paralytic.

  Instead, you can add a virtual machine from an existing vapp, vapptemplate.

  To import a vsphere vm to vcloud.

  Import vsphere vm as VAPP in vcloud. VMWVimserver-> importVmAsVApp()

  The importation of vsphere vm, as vAppTemplate, in vcloud. VMWVimserver-> importVmAsVAppTemplate()

  See also the example of ImportVmAsvAppTemplate.java, which is part of the vcloudjavasdk group.

  Kind regards

  Rajesh Kamal.

• Question: How to create the new user and schema in 11g?

  Who can give me the answer how to create a new user and a schedule?
  
  I had installed oracle 11g DB and oracle in my OS windows client. I found in the 11g than there is no console management business with the new version. It is no different with oracle 10g. So I don't know how to create this new user.
  
  I had created a new DB instance, but I did not how to create a user on it. Who can give me a helping hand for who? I hope a give oracle experenice expert answers.
  
  Thank you very much!
  
  Published by: user774630 on October 27, 2008 22:01
  
  Published by: user774630 on October 27, 2008 22:09

  Hello
  I'm not sure which option you are talking about? [Do you use the EMCA, http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/emca.htm#SUTIL800] to create the new repository for the EM? If this isn't the case, the command line that the other is using DBCA (Database Configuration Wizard). I think you're talking about that. Yes, if the message comes from creating the repository that soon after, you can connect to the EM. You would get the port no port HTTP of EM comes from the $OH/install/portlist.ini file.
  HTH
  Aman...

  Published by: Aman... on October 28, 2008 11:36
  Waived, insertion of link does not work.

• Satellite l.660-12 q - would the recovery disk rebuild the new HARD disk with a new recovery partition

  Talk about confusion. Does anyone know how to get a Toshiba C660 work after the HARD drive failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will be the recovery disk (if buy you one from Toshiba) rebuild the new HARD disk with a new recovery partition and install windows 7 (original OS) and accept the product key printed on the Windows license, attached to the base of the laptop. I have read a number of suggestions, but these have been considered incorrect by others.

  Surely, Toshiba must have a way to sort this problem.

  They read these messages?

  Hey Buddy

  I don't think it's really complicated, that I could find all the information about the recovery procedure in the user's manual

  The recovery disk must be created on the first day of purchase its recommended to create one in case something would be wrong with the HARD drive.

  The recovery disk contains an image. The image is a package containing Win system, drivers, tools and all the stuff pre-installed on the notebook.
  You bought the laptop and the system has already been activated so that you have need of t the key placed at the bottom of the unit.
  In addition, the use of the recovery disc formats the drive HARD integer (partitions too) and set the laptop in the same condition as at the first day of the purchase.

  There is also another option to recover the notebook called HARD drive recovery. This HARD drive recovery requires no recovery disk. The recovery disc HARD would be to use format ONLY partition C (System).

• How to use the model instead of RP pspice to create the new component?

  Hi, I need to create the model of opa890 of TI, but I found no spice I find model pspice, how to use it to create the new template part.

  Fouda, salvation

  I took a quick glance to the component but for some reason, the model pspice does not correctly applied to the component. The second problem was that the pins have been mapped properly. I've done the component for you with the model and print and attached it to this message. You just need to add it to your database of click with the right button on the component, and then clicking on save to DB component.

  If all goes well, you should start to see the results of the component. I hope this helps.

  Best regards

• How do I create a new user account with windows XP Home Edition after operational failure

  How do I create a new user account with windows XP Home Edition after operational failure

  Hi andyprice,
   
  -What is the operational flaw that you speak?
  -You receive an error message when trying to create a new user account?
   
  Write us with more information pertaining to the matter to help us help you better.
   
  In the meantime, you can refer to this article:
  How to create and configure user accounts in Windows XP