to_date and to_Char functions does not properly

Similar Questions

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems

• Modulo function does not properly

  
  Hi Experts,

  I use OPM version 10.4.5. I have three "Number 1", "Number2" and 'Number3' attributes and my rule is such that:

  Number3 = number1 number2 modulo

  Now this modulo function does not give the expected results when I take a number less than 1 in the denominator.

  For example: number1 = number2 = 0.4 and 1.2

  Ideally result should have been 0 1.2 is divisible by 0.4 but I'm Number3 = 0.4 (which is false)

  So when number1 = number2 = 0.4 and 1.6, Number3 = 0, in this case, I'm getting correct output.

  I tried a lot of combinations and I get incorrect results in many scenarios.

  Please suggest how to proceed with this.

  Kind regards

  Mounia

  Interesting.  Working with fractions is not too common in arithmetic mod and I think that there is a debate on this subject in math.

  That said, I agree the best answer to 1.2 mod.4 is probably 0.

  Just guessing here, but it may be a mistake floating arithmetic precision spread due exactly point your choice of fractions in the heart. 1.2 et.4

  Note that in the OPA: 1.2-.4 * trunk (1.2/.4, 0) = - 2 x 10 ^-16 as opposed to the answer of 0.  It's an indication or a tip, you can have floating point arithmetic accuracy challenges.

  Here's the fun trivia.  Google also provides the same answer for 1.2 mod.4 =.4! https://www.Google.com/#q=%3D+1.2+mod+.4 

  However, my windows calculator provides the answer to 1.2 mod.4 = 0.

  A simple selection of numbers of 0.1-2.0 > OPA No.1 increments shows 1.2 mod.4 is a quirk for which Google and agree OPA.

  In any case, while you and Oracle considers it interesting the result, if you need a work around, my guess is that something like this will do:

  Number3 = number 1 - number (text ((Numéro2 * Trunc (Numéro1/nombre2, 0))))

  This would be a possible workaround to Number3 = Number1 mod number2

  I use an old trick of developer to convert a number to text and back again to clear the registry so to speak.  Something like that might work as a temp band-aid. I would wait for a response from the Oracle, however.  I make too many assumptions about my answer to be used on a production database without talking to the appropriate Oracle.

• Equium A60 - standby and Hibernate function does not

  I have a Toshiba Equium (or Satellite) laptop A60 - bought in 2004.

  The problem that I have with him, it is that the sleep feature is very + capricious. Times it usually works. At worst it's working only a small proportion of the time. Very bad moments it never works at all.

  When startup fails I open the screen and the computer turn on, I hear the fan and hard drive, but the screen is just black display (although the backlight is on in the background).
  Sometimes, the mouse pointer is visible at the center of a black screen Uni and at other times small forests of window are visible - but the screen is still black.
  The computer is in a State of brain death, and I have to turn it off and restart to get it working again.

  I've been through this forum looking for ideas and tried without notable success the following:
  Disabling wake-up-on-LAN
  * I have already installed the latest version of the BIOS.

  I need to know how to solve this problem because my A60 is getting old and so it tends to become very hot if left running for a long period at a time.

  The total number is A60 - PSA67E 00200D8J

  I am running Windows XP is installed on original Toshiba drive - but with 5 years ' worth of Microsoft updates added on top. When I tried to reinstall the operation usually on the eve of the OS works, but by the time wherever I installed all the extras (drivers card wireless firewall, AV,...), it goes back to be unreliable again.

  Thanks in advance for any help.

  Hello

  > When the night before fails, I open the screen and the computer turn on, I hear the fan and hard drive, but the screen is just black display (although the backlight is on in the background).
  > When I tried to reinstall the operation usually on the eve of the OS works
  > I need to know how to solve this problem because my A60 is getting old and so it tends to become very hot if left running for a long period at a time.

  This means that after the installation of a new OS everything seems to work properly but after a short time the night before fails again one generally, this occurs when the laptop gets hot.
  Is this good?

  Hmm I think you should check if the high temperature does not affect the functionality of the laptop
  This is perhaps the main reason for your question.
  So I recommend to clean the vents and to remove dust using the jet of compressed air (you can get it from most computer resellers)

  In very rare cases, it would be helpful to renew the thermal grease which is placed between the cooling module and CPU.
  But this must be done ONLY by a mobile technician because the procedure of disassembly is really complicated.

  Update the display driver too. This could help to resolve the problem with the black screen.

• My copy and paste function does not work

  I've recently updated to Firefox 16.02 and everything worked fine for a while but last night out of the blue my copy / paste does not work anymore. As far as I know that I did something different. Paste my copy function still works in Chrome and IE.

  I have uninstalled/reinstalled Firefox and that did not solve the problem. As we speak, I run an analysis of the AV and also, I deleted the web cache and what not in Firefox. He ran in SafeMode... nothing seems to work!

  Interestingly, however, when I went to copy and paste the "Troubleshooting info" Clipboard here on this page it worked fine.

  Hello

  Please see this.

  Alternatively, you can try to reset Firefox and check.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Satellite A200 touchpad function does not properly

  Hello

  I spent a lot of time looking for the solution to my problem, but without effects.

  My touchpad does not work correctly. I mean, I can move the arrow and click on the screen, it's ok. But all other functions (volume, mailbox and other "virtual buttons" don't work)-the so-called "hybrid".
  I am connected to the USB port on the mouse.

  If I disconnect it, there is no change - the touchpad works only in basic mode.
  If I change the double mode in the settings of the touchpad to "always in Dual Mode when an external device is connected" - and all the virtual buttons work.
  But what do I do to make the mode of double the work even if the mouse is not connected (so that the power button works)?

  Thanks for any help,
  M.

  I m a bit confused now and I don t know what exactly you want
  You're talking about the touchpad, mouse USB, bi, etc..

  I put t know what you mean with dual mode and maybe you should give us more information about your operating system.
  And that you use the touch pad or mouse USB?

  Can you post a screenshot screen or something else?

  I put t know if this solves your problem, but have you tried to update the driver for the touchpad? You can find it on the Toshiba site.

• equal or superior function does not properly

  Hi all

  IM curious to know if anyone has seen this before or knows why his does not work.  I have an equal or superior function and I compare two doubles.  I've surveyed the numbers entering the function, so I know that 2 numbers entering the function are the same.

  Problem is that I get not a real service until comparasin value is greater than the incoming number.

  With the help of LV2011.

  Any reason that this happens?

  Thank you

  Matt

  Guess I answered my own question

  http://zone.NI.com/reference/en-XX/help/371361H-01/lvconcepts/comparison_funcs/

• Picture and Fax Viewer does not properly

  For a long time my photo and Fax Viewer did not work properly - what it does is when you look at a picture and press the arrow key once only to advance to the next photo, he jumps the next peak and climbing to the third arch. I've seen this problem on many other computers too - this seems to be a common problem - how it evolves?

  For a long time my photo and Fax Viewer did not work properly - what it does is when you look at a picture and press the arrow key once only to advance to the next photo, he jumps the next peak and climbing to the third arch. I've seen this problem on many other computers too - this seems to be a common problem - how it evolves?

  ===================================
  I haven't seen this issue before but wondering if it
  could be a problem of mouse? Is it happening is you advance
  the photos with the arrows on your keyboard?

  FWIW, you can force a reinstallation of the WP & FV by the following
  order... it might be worth a try.

  Reach... Start / run... and type
  (or copy and paste):

  regsvr32 /i shimgvw.dll

  (Yes, the space after the 2 and the)
  After the i is necessary)

  Press on... Come in...

  You should see a dialog box stating:
  DllRegisterServer and DllInstall in successful shimgvw.dll

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Keys - F2 and F3 function does not.

  I bought the laptop HP Pavilion n209TX 15 this year and key functions work properly. But later, on 10 may 2014, they do not work! I checked if there was a software through which he passed, but I did not install any type of software that may adversely affect the operation of the keys. I am really struggling with very low brightness. The last thing I did was - windows update - that installed the following software

  Microsoft Silverlight

  Furthermore, I installed HP Quick fix.

  Whenever I press F2 or F3, it shows just the cursor (it won't go up and down well) and when I click on the slider top, nothing happens again. I also tried to go to the brightness option in the Windows Mobility Center and tried to adjust the brightness - but nothing happens.

  Please help me with this problem.

  Hello and welcome to the Forums of HP.

  I would first make sure that the Intel Grpahics driver is a version that is supported by HP.

  Intel Graphics Driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-129523-1&cc=us&DLC=en&LC=en&OS=4158&product=6622488&sw_lang=

  If the issue still percists then try to reinstall the driver HP wireless button because it helps control the function keys on the laptop.

  HP wireless button Driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1&cc=us&DLC=en&LC=en&OS=4158&product=6622488&sw_lang=

  Let us know how it works for you.

  Thank you

• Hello ı have a problem with my phone ı cant get assistance from the Turkey you'd like ı cant me my phone and all functions does not work

  to whom it my concern

  my name is yusuf of istanbul

  I buy my phone 5 supports befor but the phone does not work and I can't phone me

  no body helps me to istanbul and people is treat me wrong here...

  So want you sell my theye problem don't chack the phone even if you please help me and send information of raphael

  I want to change my phone because I have 1.5 year warranty please inform me on the subject...

  Thank you in advance...

  Yusuf *.

  ******

  ******

  Where have you bought the phone?

• from windows vista and now I have xp home edition and dvd player does not properly.trying to load students teachers Microsoft office 2003 edition of the disc and it won't work.

  DVD player does not.

  Hello Deltadiver,

  Thank you for your message.  Have you downloaded/installed the latest driver for your computer?  Access the manufacturer's Web site and search for your type of computer, from there, you will need to get the latest driver for your CD/DVD-ROM drive, make sure the driver you get is for Microsoft XP.  Please let us know if you have trouble with this and we can help you further.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Adobe prelude CC search function does not properly?

  Hey guys,.

  Need help, I'm using 'tag' in prelude CC, tagging clips with multiple words IE "Day One, Interview, Ben.

  When searching the Staples images are visible if I type the words 'A day' or 'Ben', but if I type their return to save IE: 'Ben Day One' Prelude does not have images.

  I really need to be able to search at once several tags/comments. Have tried this in first CC and it works perfectly just prelude is not.

  If someone has had this problem or can suggest a difficulty of research several tags/comments.

  Thank you

  Nico

  HI -.

  Prelude is currently looking for matches of the exact string - including punctuation.

  We are looking in providing a more capable search engine in the future.

  Kind regards

  Michael

• Sleep/wake functioning does not properly

  I recently bought an iMac 27 '' new. I have problems with sleep/wake function. It works erratically. He'll still go to mode 'sleep' when I choose that, but about 60% of the time it won't wake up when I want that. I have to turn off the power and restart to power the computer. I got off the computer rather than put in mode 'sleep'. Does anyone have any ideas on how I can fix this? I've updated to the latest version of El Capitan and run the appropriate version of the OnyX, but nothing seems to help.

  A secondary issue is with an external hard drive. I have three connected to the computer. One and always the same, 'evil' ejects itself randomly. It appears and disappears at will. Does anyone have ideas on this?

  Thanks for any help that anyone can give.

  Reset the SMC. Choose the appropriate method.

  https://support.Apple.com/en-us/HT201295

• Create PDF in Excel, Outlook and Word function does not.

  To the right:

  I have a machine of Windows 7 with Outlook 2010 installed with Adobe 8 is installed.  I try to use the creation of a PDF function in the Adobe tab and nothing happens when I click on this option.

  I reinstalled the software and the same issue.

  Thank you

  Magellon

  If you have installed a version of Adobe, its support you should ask, or their forums

  I'm not quite sure if Adobe 8 pro/std support win7 or Office 2010

  http://helpx.Adobe.com/Acrobat/KB/new-features-issues-addressed-Acrobat.html

• TO_CHAR function does not

  Hello
  
  I want to get the dates max on MM/DD/YYYY format. the problem is that it only works on
  
  Select distinct
  t.ID,
  Max (to_char (t.tr_date,'MM/DD/YYYY')) as transaction_date,.
  s.contract_date,
  Max (i.start_date) as start_date,
  Max (i.end_date) as end_date
  
  of trans_history t.
  s subscription,
  Inv I have
  
  where t.prod = 'FTU'
  "and t.tr_date > = January 1, 2010"
  and s.id = t.id
  and i.id = t.id
  
  and t.id = 1983634
  Group
  t.ID,
  s.Contract
  
  result:
  
  ID Transaction contract Start Date end
  1983634 03/10/2010 11/01/2008 17/03/2010 29/03/2010
  
  so if I change the query as below: im not getting values max to start date and date of end
  
  Select distinct
  t.ID,
  Max (to_char (t.tr_date,'MM/DD/YYYY')) as transaction_date,.
  s.contract_date,
  Max(TO_CHAR(i.start_date,'MM/dd/yyyy')) as start_date,
  Max(TO_CHAR(i.end_date,'MM/dd/yyyy')) as end_date
  
  of trans_history t.
  s subscription,
  Inv I have
  
  where t.prod = 'FTU'
  "and t.tr_date > = January 1, 2010"
  and s.id = t.id
  and i.id = t.id
  
  and t.id = 1983634
  Group
  t.ID,
  s.Contract
  
  I wonder why to_char only works on the field of t.tr_date.
  
  Help, please.

  Max (to_char (t.tr_date,'MM/DD/YYYY')) as transaction_date

  The foregoing converts date to string + *, and then only MAX. So is not dates, but compare strings when calculating MAX and based on string comparison something like 1 November 2009 "becomes higher than 23 July 2010". Change to:

  TO_CHAR (max(t.tr_date),'MM/DD/YYYY') as transaction_date

  SY.