Sleep/wake functioning does not properly

Similar Questions

• Modulo function does not properly

  
  Hi Experts,

  I use OPM version 10.4.5. I have three "Number 1", "Number2" and 'Number3' attributes and my rule is such that:

  Number3 = number1 number2 modulo

  Now this modulo function does not give the expected results when I take a number less than 1 in the denominator.

  For example: number1 = number2 = 0.4 and 1.2

  Ideally result should have been 0 1.2 is divisible by 0.4 but I'm Number3 = 0.4 (which is false)

  So when number1 = number2 = 0.4 and 1.6, Number3 = 0, in this case, I'm getting correct output.

  I tried a lot of combinations and I get incorrect results in many scenarios.

  Please suggest how to proceed with this.

  Kind regards

  Mounia

  Interesting.  Working with fractions is not too common in arithmetic mod and I think that there is a debate on this subject in math.

  That said, I agree the best answer to 1.2 mod.4 is probably 0.

  Just guessing here, but it may be a mistake floating arithmetic precision spread due exactly point your choice of fractions in the heart. 1.2 et.4

  Note that in the OPA: 1.2-.4 * trunk (1.2/.4, 0) = - 2 x 10 ^-16 as opposed to the answer of 0.  It's an indication or a tip, you can have floating point arithmetic accuracy challenges.

  Here's the fun trivia.  Google also provides the same answer for 1.2 mod.4 =.4! https://www.Google.com/#q=%3D+1.2+mod+.4 

  However, my windows calculator provides the answer to 1.2 mod.4 = 0.

  A simple selection of numbers of 0.1-2.0 > OPA No.1 increments shows 1.2 mod.4 is a quirk for which Google and agree OPA.

  In any case, while you and Oracle considers it interesting the result, if you need a work around, my guess is that something like this will do:

  Number3 = number 1 - number (text ((Numéro2 * Trunc (Numéro1/nombre2, 0))))

  This would be a possible workaround to Number3 = Number1 mod number2

  I use an old trick of developer to convert a number to text and back again to clear the registry so to speak.  Something like that might work as a temp band-aid. I would wait for a response from the Oracle, however.  I make too many assumptions about my answer to be used on a production database without talking to the appropriate Oracle.

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems

• Satellite A200 touchpad function does not properly

  Hello

  I spent a lot of time looking for the solution to my problem, but without effects.

  My touchpad does not work correctly. I mean, I can move the arrow and click on the screen, it's ok. But all other functions (volume, mailbox and other "virtual buttons" don't work)-the so-called "hybrid".
  I am connected to the USB port on the mouse.

  If I disconnect it, there is no change - the touchpad works only in basic mode.
  If I change the double mode in the settings of the touchpad to "always in Dual Mode when an external device is connected" - and all the virtual buttons work.
  But what do I do to make the mode of double the work even if the mouse is not connected (so that the power button works)?

  Thanks for any help,
  M.

  I m a bit confused now and I don t know what exactly you want
  You're talking about the touchpad, mouse USB, bi, etc..

  I put t know what you mean with dual mode and maybe you should give us more information about your operating system.
  And that you use the touch pad or mouse USB?

  Can you post a screenshot screen or something else?

  I put t know if this solves your problem, but have you tried to update the driver for the touchpad? You can find it on the Toshiba site.

• equal or superior function does not properly

  Hi all

  IM curious to know if anyone has seen this before or knows why his does not work.  I have an equal or superior function and I compare two doubles.  I've surveyed the numbers entering the function, so I know that 2 numbers entering the function are the same.

  Problem is that I get not a real service until comparasin value is greater than the incoming number.

  With the help of LV2011.

  Any reason that this happens?

  Thank you

  Matt

  Guess I answered my own question

  http://zone.NI.com/reference/en-XX/help/371361H-01/lvconcepts/comparison_funcs/

• to_date and to_Char functions does not properly

  TO_CHAR SQL function below, NLS date format game does not: DD-MON-RRRR HH24:MI:SS, which gives an error: ORA-01722: invalid number

  Select

  To_char (January 1, 2014 ","MM-YYYY"") double;

  Wrong forum!

  This question has NOTHING to do with the Sql developer and belongs in the forum Sql and PL/SQL.

  SQL and PL/SQL

  Select

  To_char (January 1, 2014 ","MM-YYYY"") double;

  Your channel's day, then the month, then the string format and the year has only the month and year and month is a format DIFFERENT from that of the first string.

  Before repost you in the Sql and the forum PL/SQL examine the format of Date/time patterns in the Doc of the SQL language:

  Format patterns

• Adobe prelude CC search function does not properly?

  Hey guys,.

  Need help, I'm using 'tag' in prelude CC, tagging clips with multiple words IE "Day One, Interview, Ben.

  When searching the Staples images are visible if I type the words 'A day' or 'Ben', but if I type their return to save IE: 'Ben Day One' Prelude does not have images.

  I really need to be able to search at once several tags/comments. Have tried this in first CC and it works perfectly just prelude is not.

  If someone has had this problem or can suggest a difficulty of research several tags/comments.

  Thank you

  Nico

  HI -.

  Prelude is currently looking for matches of the exact string - including punctuation.

  We are looking in providing a more capable search engine in the future.

  Kind regards

  Michael

• The function does not properly when you use the shortcut to insert

  Hello everyone. I am using first Pro CC V9.2 on a PC.  I am as well as a Lynda tutorial and told me quite clearly that using the comma key insert a subclip in my sequence.  However, using the shortcut brings in the full clip, not the sub.  I just bring my subclip using a drag and drop, which is really slow me down.  Anyone know what this could be?

  When you perform your subelements, you Restrict toppings to the limits of a verified subitem?

  

  MtD

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Sleep function does not

  Sleep function does not

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• Bluetooth, sleep and screensaver does not

  Bluetooth, the sleep and screensaver does not.  We need a fix for this.

  Bluetooth will not connect to three other Bluetooth devices, which are a Samsung Tablet, Blackberry phone and computer Dell windows 8.1.  Connect all together, it does not connect to HP Envy 23.  I have tried everything I can find on the Internet to solve these three elements, but have not yet find something that actually works.  There are a lot of discussions about that give some suggestions, but in my case, non of work them.

  Obviously the pilots are the culprit, would be so nice to have a few updates.

  Well, it's different.  I tried to send a file from my computer to the Tablet and the file has been sent.  So I did it in reverse and it sent my tablet to the computer from HP.  So the part where I spoke 'connection', then 'no connection', does not yet mean anything.  Looks once it is paired and it goes through the function connected, not connected, this obviously means that it remains connected, once it does that.

  Not a very good way to do it, but it works now, I am very happy and thank you for the help

• Toshiba 47L7453DG - CEC does not properly using exernal amplifier

  I bought Toshiba 47L 7453 a few days ago.

  It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

  My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

  The wire connection is HDMI 1.4 certified.
  Maybe the problem is with the firmware of the TV.

  Maybe someone had the same problem.

  Any suggestion?

  Thank you

  Hello

  From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

  Manual, you will find some important notes:
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7453-424755-English.PDF

  _Page: 11_
  + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
  + If several devices are connected, the HDMI CEC control function may not work correctly. +

  _Page: 86 - 87_
  + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
  + On, also allocated to individual features will be activated. +
  + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
  + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

• Windows 7 auto mde sleep and hibernation does not

  Hello

  I am Windows 7 64 bit Home Premium SP1 - computer laptop ASUS K55A and automatic sleep mode / hibernation does not work.

  Please tell us what to do to fix.

  Thank you

  Lynne

  Thank you for your time and your answers...

  I ran the Microsoft Fix It and now everything seems to work very well. .  sleep/wake extended and even the screen saver is now working.

  I am a very happy customer.

  Difficulty of MS is an excellent solution - and easy to use.

  See you soon
  Lynne Carter

• Safari Web Clip does not properly

  Hello everyone

  I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

  

  

  Is this some sort of bug or can I fix it myself?

  Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

  Dashboard widgets in general, are an old technology that has not been updated in many years.

• I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  Question
  I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  edit, escaped mod < s > in order to avoid the line through question

  A web page can be defined a "accesskey" for an item. Unlike IE/Chrome/Safari, who use the Alt key only, Firefox requires pressing Alt and Shift to activate the element. In other words, try

  ALT + SHIFT + S

  and see if it works.

  I don't know of any way to change this so that the change is not necessary. There may be an add-on?