to display characters

query on view from A to Z?

Hello Rajkumar,

something like

SELECT CHR (ASCII ('A') + (LEVEL - 1) FROM dual CONNECT BY LEVEL<=>

Best regards

Bruno Vroman.

Tags: Database

Similar Questions

  • Why Firefox displays characters Asian trash for each name on the tab instead of the current English name?

    After a few use firefox displays (repeated) Asian characters instead of real names of tab. (See attached image).

    He arrived in at least 2 computers. Usually, I install the same Add-ons with fees installs Windows.

    The extension of McAfee SiteAdvisor has been reported to cause problems with Chinese characters (CJK) text on tabs, so that you can disable this extension until McAfee publishes an update to resolve this issue.

  • How can I display characters in 'Wireless Network Connection' - &#62; 'Properties' when the checkbox "show characters" is grayed out?

    How to display hidden characters in the Properties tab, in the connection, that I am using, under the wireless network connection box when that I should be able to check box is greyed out and unclickable?

    Also NOTE: When you try to use ctrl-p method, a ctrl-v, at the point where you click the box of characters on that he blanks.

    Hello

    You are connected to a domain?

    If the show characters check box is grayed out, the network, or the computer may be restricted by a group or local policy.

    If this computer is connected to a working network, I suggest you contact your help desk or IT Department.

    Concerning

  • Firefox doesn't display characters

    Hi, after installing a new video card in my computer with windows 7, firefox displays not only any character... I sent a picture showing whats happening... What can I do to fix this? Other programs and browsers such as Chrome, IE, work well, the problem is with firefox...

    You can try disabling OMTC and leave hardware acceleration in active Firefox.

    • topic: config page: layers.offmainthreadcomposition.enabled = false

    You can open the topic: config page via the address bar.
    You can accept the warning and click on "I'll be careful" to continue.

    You can try to disable hardware acceleration in Firefox.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    You will need to close and restart Firefox after enabling/disabling this setting.

  • How to store characters in result file and display on front panel

    Hello

    currently I am working on the FPGA project.i want data acquired from FPGA board.i want to know on how to store characters to the file and contineous each character display on the façade in the string format.

    I'm full up to characters on the front display, but display characters only when I want all characters in string format.

    I don't see how this question fits in any digital i/o, but it looks like you just need a change of register with the concantanate string function.

  • Display of Asian characters, Unicode issues

    I have a problem with the display of Asian characters. In a number of programs instead of display characters, it shows just the squares for lack of character. So far the programs I've seen this problem in are iTunes, Windows Explorer, Notepad and Windows Media Player. When I copy these places in Google Chrome, they seem like the appropriate characters. I recently installed Windows 7 (some time last week) and could see all the fine Asian characters. The problem started this morning after restarting my computer (before I restarted the computer, I could see all the characters). Most of the solutions, I tried an online state change settings Japanese system locale. However, the characters I want to see are not all Japanese. Some are Koreans and some Chinese. Is there a way to establish that he is able to show all three types of characters?

    Hi crazymanjinn,

    a. what edition of windows 7 you are using?
    b. recent changes made on your computer, such as installing or upgrading the software/hardware?

    If it solves your problem, you can try the steps and check them off below.

    1. open region and language by clicking on the Start button, click on the Control Panel, clicking clock, language, and region, click the region and language.
    2. click on the keyboards and languages tab.
    3. under display language, click install/uninstall languages, and then follow the steps.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    For more information, visit the links below:
    http://Windows.Microsoft.com/en-us/Windows7/install-or-change-a-display-language
    http://Windows.Microsoft.com/en-us/Windows7/using-special-characters-character-map-frequently-asked-questions
    http://Windows.Microsoft.com/en-us/Windows7/products/features/language-packs

    If your problem persists then, you try to run the restore of the system on your computer.

    System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

    To restore the operating system to an earlier point in time, follow these steps:

    1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    2. in the System Restore dialog box, click on choose a different restore point and then click Next.
    3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. click on finish.

    For more information visit http://support.microsoft.com/kb/936212/

    Hope this information is useful.

    Umesh P - Microsoft Support

  • FireFox does not display special characters!

    I'm sure that this has been talked about before, but I can not find all related messages... Basically, I have a flash application that will have a variable of text through the query and the disaply chain, the problem is that it must take 11 different languages which works fine in Internet Explorer once all the glyphs that are special for languages are incorporated. But in Firefox displays characters only standard ascii Latin! Help, please!

    Hi Rifaet,

    Good news. There is a simple way to solve the problem of the special character of FireFox. Use and .js external file to store a function to write the embed tag and it will work, it has the added benefit of the fixing of the new 'problem' with internet explore also.

    myFlash.js

    function writeflash() {}
    document. Write (')
    }

    and then in your HTML document where the embed tag used to be you just place:

    See how here, the first example is easy

    http://msdn.Microsoft.com/library/default.asp?url=/workshop/author/DHTML/overview/activati ng_activex.asp

  • I am trying to learn a new language (malyalam, however on my labtop the language characters will not appear in my browser.)

    I am trying to learn the language of Malayalam. On some computers, the characters of the language appears. However, for my laptop browser characters will not appear. What download should I so that the characters to display. This is the Web site in which the characters/letters are displayed on other computers, but not mine:

    http://mylanguages.org/malayalam_alphabet.php

    Here is a picture with some characters:
    http://www.entemalayalam.org/images/ammomma%20New.jpg

    Do all these computers have the same operating system?

    As you can see OS X 10.5 comes with a 'policies need a' direction and that means that you don't have this font by default.

    See you support such scripts, you must have the language and have installed fonts to display characters.

  • How do the symbols in the display of the GUI

    Hello

    I'm a GUI in which I have to display symbols on screen programming am starting at Labwindows.I.

    I would like to know how I can include this symbol (e.g.: Sun symbol etc.)

    I even see two arrows in BC15 police. I would like to know what value should I update in the text box to display the arrows

    Thank you & best regards

    Sun

    Hi Suresh.

    I guess you want to display all the characters available in your selected font.

    In Windows, click the Start button, click Run, type "charmap.exe", and then click OK. You can then select your font and display characters and the corresponding codes.

    Kind regards

    Colin.

  • Is the device fonts _serif * only * to view games Latin1 characters and Cyrillic in FTE?

    Hi all

    I think I understand, is that in Flash Player 9 and below TextField object was able to display any character language of the East Asia through fonts device "_serif", "_without" or "_typewriter".

    New FTES provided with Flash Player 10 TextElement object seems to use device fonts "_serif" only for games of Latin1 characters or Cyrillic.

    For example, FTES uses "Simsun" (rescue) police device to display Chinese language and characters for characters in the thai language, police FTE uses 'Angsana New' (of aid) of the device.

    My question is:

    Why does not TextElement of FTE "_serif" use device font to display characters language thai or Chinese as it did brother TextField in Flash Player 9 and below?

    The problem with fonts "SimSun" or "Angsana New" are not present in the Windows XP operating system (in English) at default install installation configuration.

    I'd put it simply - how older TextField component of Flash Player 9 is able to display thai characters when there is no other police of this device on Windows XP with Thai glyphs in addition to Tahoma and Microsoft Sans Serif fonts?

    TextField relies on GDI to do the layout. GDI supports mixed fonts: fonts that use the OpenType layout for some scripts and layout not OpenType for other scripts. Tahoma and Microsoft Sans Serif are mixed fonts.

    FTE does not support these mixed fonts, or more precisely: If there is provision OpenType for any script, we use the OpenType layout for all scripts. Our choice means that Tahoma and Microsoft Sans Serif cannot be used per FTE for thai. We felt that the benefits of not dealing with mixed fonts offset the disadvantages. In particular, if the user of a system can read thai, it is very likely that it will install other Thai fonts.

  • Re: Portege 4010 - Question on keyboard options

    Hello

    Can someone tell me how to type the character @ please?
    When I try to type my display characters "."
    This applies also to the character #-which shows a sign of $.
    There must be a toggle to access these characters.

    Please notify.
    Thank you very much Roblgay

    Hello

    This can be solved with the right keyboard language settings. I don't know what OS youuse but a very nice webpage on keyboard settings, which you will find under http://www.ficorp.com/intl_xp.html

    Good luck!

  • CVI 2013 SP1 crashes when opening file

    LabWindows 2013 SP1 has suddenly stopped working on my PC.  Any time I try to open a file, or by clicking Browse on the home page, by clicking the open file icon, or by selecting file - open or file - save as from the main menu, I get the message popup that says ' LabWindows/CVI 2013 has stopped working '.

    By clicking on "display characters invisible problem" shows this:

    Signature of the problem:
    Problem event name: BEX
    Application name: cvi.exe
    Application version: 13.0.1.201
    Application timestamp: 52d6eeab
    Fault Module name: CVI.dll
    Fault Module Version: 13.0.1.201
    Timestamp of Module error: 52d6eea1
    Exception offset: 00a4ecd0
    Exception code: c0000409
    The exception data : 00000000
    OS version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    Information has additional 1: 417
    More information 2: 417afcd3ce602885d582521ac0f0405e
    3 more information: 39bb
    Additional information 4: 39bb24ea28d79f3c45538f96792cdc59

    These values are always the same.

    I am running Windows 7 Professional, SP 1.

    If you just did a normal installation of CVI 2015, it might still be interesting to try a force reinstall. It is possible that there is a corrupt file of CVI 2013 somewhere.

    Take the information to the same post here, it seems that this issue might be specific to your Windows configuration.

  • normal string to hex string

    Hi all

    This question has probably been asked before, but I can't seem to find a situation that quite matches the issue I am experiencing. I have a table that I flattened as a string of data, reverse order, take the first two elements, reverse the new order and feed the characters in a loop for. I want the string to hexadecimal, thus having FE0C (in hexadecimal) through the loop for, but when I select the execution I see that normal display characters cross instead. When I view my channel, I already have a right-click to display the hex that is correct. How to convert the normal string to a hexadecimal string?

    Thank you

    J

    You can use Type Cast to change into a U16 (since it is supposed to be 2 bytes) or the Unflatten of the chain.

  • I can't read this in my windows 7 64 bit language English screenshot here please help

    I can't read this in my windows 7 64 bit language English screenshot here please help

    Iaaaeuuee - eiiieaeo niaoeaeecediaaiiue, idaaiacia÷aiiue adult idiaeoediaaieÿ
    e iiaaioiaee idiecaianoaa

    sound in Russian I know, but it looks like the Russian

  • Indicator automatic resizing of string with carriage returns in the chain

    I try to have a string on my front indicator automatically resize to put different strings that are sent to it.

    I found the function 'Get the Rect.vi text' and it seems to do exactly what I want, but only for the first line of my string.

    It is not resized to display characters after a carriage return / newline.

    Here is a picture of the chain resized automatically next to a picture of the complete string that I size manually.

                       

    How do I autosize my chain indicator box to include all of my text?

    The node to invoke "Text size" would work?

Maybe you are looking for