To escape any character conversion

Similar Questions

• With Sequelink character conversion

  We are running Coldfusion 4.5 (WinNT) using the driver from Datadirect Sequelink for queries on an instance of DB2 OS/390 on MVS. There is no problem doing this, however, I test a copy of the CF 7.02, running the same applications. The DB2 driver that comes with the addition of the CF company apparently does not support DB2 in this environment, so I use the ODBC Socket to create a data source. All my queries fail with an error of truncation right due to the faulty character conversion. The queries work with the old instance of Coldfusion and other applications on the server, so I think it must have something to do with the Sequelink JDBC layer. I looked through the documents to see if there is a setting or a combination of tag that could allow the connection. Has anyone seen this?
  Also, associates, some of the CF Datasources (Sequelink ODBC Socket) now give an error to check that the data source can be found, even if the DSN is properly registered and functioning within Windows. After trying different connection strings, this has happened to various data sources. The Windows DSN now not to create a CF data source even if I have to drop and recreate it. I would switch to MX for the extra features, but I can't if it's going to kill my whole site.
  
  Brian

  I did a little investigate and narrowed the problem so I would close this debate and to repost my question under a different title. Thank you.

• ORA-06502: PL/SQL: digital or value error: character conversion number e

  Hi all
  I work with DBLOCALE , which is

  Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
  PL/SQL Release 10.2.0.3.0 - Production
  CORE     10.2.0.3.0     Production
  TNS for IBM/AIX RISC System/6000: Version 10.2.0.3.0 - Productio
  NLSRTL Version 10.2.0.3.0 - Production

  and DBREMOTE

  Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
  PL/SQL Release 9.2.0.8.0 - Production
  CORE     9.2.0.8.0     Production
  TNS for IBM/AIX RISC System/6000: Version 9.2.0.8.0 - Production
  NLSRTL Version 9.2.0.8.0 - Production

  Leave a procedure on DBLOCALE I run SCHEMA. MYPROCEDURE@dbremote (NUMBER, stringPar VARCHAR2, datePar DATE numberPar)
  
  I use this procedure only to call a function in a package of DBREMOTE with education booleanresult: = MYPACKAGE. MYFUNC (NUMBER, stringPar VARCHAR2, datePar DATE numberPar)
  
  In the service, I try to INSERT IN MYTABLE (numberPar, stringPar, datePar) and the error

  ORA-06502: PL/SQL: numeric or value error: character to number conversion error

  is triggered.
  
  I missed something basic? Where is my mistake?
  
  I have check all types of past data and types of data in the table, that I have to insert.
  
  Any help or suggestion will be appreciated. Feel free to ask me any questions that need me to explain or for more details.
  
  Best regards
  Alex

  OraclePSP wrote:

  It starts with a page of APEX who call a procedure in DBLOCALE.

  Apex point (page) variables are all text - and bind as text variables when used in PL/SQL and SQL code.

  In this procedure, ii assess the past, then insert into a few tables@DBREMOTE without errors.
  The end of it, I'm calling the remote packaged function.
  In the function I use parameters to open a cursor and insert into MYTABLE.

  That you pass as parameters? The variable element of Apex (e.g. : P1_DATE) or do you attribute the object variable to a PL/SQL variable and the neck of the PL/SQL variable as a parameter?

  Even if I agree with you on the copy & paste I don't know what part of the process, I can speak to you.

  Well, you can try the following. Create a dynamic PL/SQL region on the page. This region should be implemented and made that the page has been sent (in other words, element variables used in the page need value for this region, for the record). You can create a condition for this region that must be met to be made - and this can check the QUERY variable, or to check if the relevant variables have values.

  In this dynamic PL/SQL code for the region block, use HTP.prn () as you would use DBMS_OUTPUT.put_line () in client-server test normal (using TOAD or SQL * more). And in this block of code, call the remote procedure.

  For example

  --// dynamic PL/SQL region code block:
  HTP.prn( 'Item P1_DATE = ['||:P1_DATE||'] 
  ' );
  HTP.prn( 'Item P1_NUMBER = ['||:P1_NUMBER||'] 
  ' );
  ..etc..
  
  HTP.prn( 'Calling remote procedure:
  ' );
  begin
    RemoteProc@RemoteDB( param1=>:P1_DATE, param2=>:P1_NUMBER );
    HTP.prn( 'Call was successful
  ' );
  exception when OTHERS then
    HTP.prn( 'Call failed with: '||SQLERMM(SQLCODE)||'
  ');
  end;
  ..etc..
  

• hexadecimal character conversion problem

  I'm having a problem with converting a hexadecimal character, using a custom string.
  
  for example:
  
  trace ('\x41'); I'm 'A' which works very well.
  
  but for example:
  
  trace ('\x' + '41'); I give 'x 41' which did not
  [\x' + '41']. toString(); I give 'x 41' which did not
  
  the backslash seems to disappear if the hexadecimal code of the string is not complete in a first time, but I need to be customized by using the two random characters on the end ((\xhh) \xhh) as instead of \xhh, make customized as follows:
  
  \x + hh but it won't work like that
  
  does anyone know a solution to this, or any possible use of a methid that seems to have no knowledge of who will do what I want to do?
  I have apreciate the help.

  Faylon456,

  > trace ('\x' + '41'); I give 'x 41' which did not
  > [\x' + '41']. toString(); I give 'x 41' which did not

  I'm with you. I don't know, honestly, why your (slash x) \x is partially
  work, because the prefix for hexadecimal numbers must be 0 (zero) x
  Maybe the forum software changed your post a little? Maybe it's my news
  drive. In all cases, you can use the parseInt() function to convert a
  string to a number - which is the first parameter - and the second
  setting determines the radix, or base, of the number to be tested.

  trace (string.fromCharCode(0)) (parseInt ("41", 16)));

  In the light of the foregoing, your 14 is passed as a string, the 16 indicates the result
  to be in hexadecimal. That allows you to bypass any escape.

  David Stiller
  Co-author, Foundation Flash CS3 for designers
  http://tinyurl.com/2k29mj
  "Luck is the residue of good design."

• How to escape '? ' character in a mailto URL?

  Hello
  
  I use the library documents packaged application.
  
  There is a nice feature to send a link with a mailto link.
  
  Unfortunately the link contains
  

  mailto:[email protected]@sivoa.fr?subject=readme.txt&body=http://tg1:7777/pls/apex/f?p=107:2:::::P2_DOC_ID:4

  The problem is that the second question mark "?" is interpreted as a special character and so I get this in the subject of the message:
  
  Readme.txt & body = http://tg1:7777 / pls/apex/f
  
  How to escape the second question mark?
  
  I tried in vain with blackslahes.
  
  Thank you for your kind answers!
  
  Christian

  Hello Christian,.

  Have you tried the apex_util.url_encode function?
  http://download.Oracle.com/docs/CD/E14373_01/apirefs.32/e13369/apex_util.htm#insertedID90

  Greetings,
  Roel

  http://roelhartman.blogspot.com/

• date to character conversion problem

  Hi, if I use the query
  
  Select to_char(hiredate,'dd-month-yyyy') in emp;
  
  As a result like:
  
  TO_CHAR (HIREDATE,
  -----------------
  -17 December 1980
  -20 February 1981
  -22 February 1981
  02 April-1981
  September 28, 1981
  01-May-1981
  
  
  BUT what of the query (I added one more would be "for the date format): select to_char(hiredate,'ddd-month-yyyy') from emp;
  
  which displays the result (SEE DATES)
  
  -352 December 1980
  -051 February 1981
  -053 February 1981
  -092 April 1981
  271 September 1981
  -121 May 1981
  
  
  and if I use one more would be "in like date format: select to_char(hiredate,'dddd-month-yyyy') from emp"
  
  It displays
  
  -3524 December 1980
  -0516 February 1981
  -0531 February 1981
  -0925 April 1981
  2712 September 1981
  -1216 May 1981
  
  
  Can anyone TELL WHAT MODEL OR RULE IS APPLIED HERE TO THE DATE which IS HANDLED according to THE NUMBER of a is in THE DATE FORMAT? HOW DATES ARE BEING CALCULATED WITH DIFFERENT NUMBER OF ds?

  Hello

  For JJ, is show you the day of the month
  i.e. for December-17-1980 is 17

  For DDD, it shows you the day of the year
  That is to say. 17 December-1980 it is 352

  For Davis, it is show you the year and day in the week.
  IE.17 - December-1980 grave Wednesday (4th day of the week) is 352 and 4 i.e. 3524

  Concerning
  Anurag Tibrewal.

• Query of queries (QofQ) escaped character problem

  Hi all
  
  I am trying to run a query or queires (QofQ) and I do a LIKE comparison which finds support ([]) characters in the string, but ColdFusion ignores the media. How can I escape the character of support? So far, I couldn't escape the percentage based on the Docs sign live ColdFusion. The error message I get when I run the query below is:
  
  «"" "Invalid escape sequence.»»»" Pairs of valid sequence for this escape character are: "------%", or "\".
  
  This is the query:
  < cfquery dbtype = "query" name = "getLogs" >
  SELECT *.
  OF GetLogs
  WHERE Description LIKE '\[User:#UserID#\]% %' ESCAPE ' \'
  < / cfquery >
  
  Thanks for your help!

  What of it?

  WHERE my Description LIKE ' % [[] user: #UserID #] %'

• CS3: need script to replace spaces with underscores in the paragraph and character style names

  Help! I am very new to scripting.

  I managed to find and tweak existing javascripts to search through all my paragraph styles to disable hyphenation and off balance the jagged lines, but I need help with this one.

  I work on Mac OS 10.4.11 using Indesign CS3.

  I need a script that will search all my paragraph and character styles in my open Active document and replace spaces by underscores.

  Can someone help me with this? It would be greatly appreciated!

  1. I don't know, but I think you can use all the regular GREP inside this function codes. Do not use the quotation marks around of the expression, use slashes! (Why? Just a curiosity of Javascript... maybe a hack that goes back to the gray mist of JS development...)

  This work should - but rather the code above, this is not tested:

  .. Replace (/ [-\ / ()-. _] + / g. '_');

  The GOLD group inbetween the brackets contain all the characters you want to replace with an underscore: the hyphen (this has to be the first character in the group, else it will be interpreted as a range of characters from each side!), space, slash (this one is 'special' inside the function replace JavaScript, so I think he needs to escape with a backslash)! in parentheses, a period (not sure if it should escape - into ordinary GREP, it's the wildcard character for any character, but maybe he loses his magic within a group of GOLD) and finally... the underscore character. Why?

  Well, this replacement string comes with a free bonus. Note the sign after the installment of GOLD +. This means that a whole sequence of these characters is replaced by a simple underscore: "it's / a - / test" will become "This_is_a_test". Adding the underscore line itself to the string of research means that it will also find the whole chain 'space space (stroke underscore)' in 'This style (_)' and, oh magic!, replace it immediately with a single underscore.

  Just FYI, the tiny "g" after the closing slash is abbreviation of 'global', i.e. at the global level, replacing in this string. replace the default values for a replacement only (why? see above...), and adding the 'g' ensures he keeps replacing until it is not find matches more.

  2 see point 1.

  3. uh, yes it's true, but you will need to check very carefully if nothing inside one of these basic models is substituted. You can apply a base style and add substitutions to make look like a subtitle, but that isn't making it a. And to the next paragraph, you can apply a base style and add substitutions to make it look like a paragraph of plain text (etc.). It's a signature of witness to bad formatting...

• Escape a &amp; a list

  I'm trying to escape the character into an inlist &. I tried in vain to use the.
  
  Example: Note the last item in the list
  

  AND dp.code    NOT IN ('CES', 'COUNCL', 'CITSER', 'RECYCL', 'C&NSRV')

  Any ideas are appreciated.

  If your list consists of fixed values, you can use CHR (38), as

  AND dp.code    NOT IN ('CES', 'COUNCL', 'CITSER', 'RECYCL', 'C' || CHR(38) || 'NSRV')
  

• VARCHAR2: 8 k limit when you use a multibyte character set

  Hi people,
  Apex 3.1.2 on 10.2.0.4 RAC on linux; the character set standard for my organization is AL32UTF8.
  The apex database contains all non-US7ASCII character.
  
  In a part of the URL, I just came from a package XML strings that are concatenated and passed as a parameter to Anychart.swf. Once my concatenated string exceeds 8 k I get "ORA-06502: PL/SQL: digital error or value." This is because on a UTF8 database are reserved to 4 bytes for each character; whether coded on several bytes, or not - and the varchar2 (32767) is exhausted.
  
  It is a severe limitation as the XML table can easily exceed 8 k.
  
  What choices do I have?
  -If I change my database in US7ASCII he works my limit for the concatenation in a region with a real 32,767 characters? Better, but still limited.
  -are there functions to force a single byte per character conversion - I don't think so, but just in case where...
  -would spend using CLOB? I'm worried it might slow down processing low-response time is one of the main motivations for going to the whole problem in the first place.
  
  My code looks like this:
  
  DECLARE
  Xml1 VARCHAR2 (4000);
  xml2 VARCHAR2 (4000);
  XML3 VARCHAR2 (4000);
  xml4 VARCHAR2 (4000);
  str1 VARCHAR2 (32767).
  
  pkg_chart. Gen_Chart_Xml5
  (p_chart = >...)
  , p_Location = >...
  , p_timescale = >...
  , p_Day = >...
  , p_RETURN1 = > xml1
  , p_RETURN2 = > xml2
  , p_RETURN3 = > xml3
  , p_RETURN4 = > xml4
  );
  str1: = xml1. xml2 | XML3 | xml4;
  
  .. .and later
  var Chart1 = new AnyChart();
  Chart1.SetData ("' | str1 |) ''');
  Chart1.write ("chartDiv-1");
  
  Right now my code fails in concatenation in str1 if the total length is more than about 8 k.
  I've seen different messages about CLOB handling in the apex and it seems to be fraught with problems too: so I was wondering if anyone has any advice on how to best proceed. or could you show me an example to do something like this using CLOB instead.
  
  Thank you very much!
  Mark
  
  Published by: Mark Teehan on October 12, 2009 02:22

  Hello

  I was about to hit you up an example when I spotted a recent blog post of someone I know called Morten Jensen.

  His blog is here [http://theworldofjensenmo.blogspot.com/] and here is the relevant quote...

  >
  He must be a procedure which will be "buffer printing" CLOB. The procedure to come htp.prn with the PL/SQL Web Toolkit in the Oracle database allow up to 8192 characters to print at a time, which is too few in my case. So this function below will share a CLOB up to 256 character fragments and htp.prn them one at a time.

  create or replace PROCEDURE HTP_BUF_PRN
  (p_text IN CLOB
  ) AS
  l_buflen INTEGER: = 256;
  BEGIN

  FOR i FROM 0... Floor (length (p_text) / l_buflen) LOOP
  -HTP. PRN will not accept lines up to 8192 characters - that's why this function is required
  HTP. PRN (substr (p_text, i * l_buflen + 1, l_buflen));
  END LOOP;

  -htp.prn (substr (p_text, LENGTH (p_text) - (LENGTH (p_text) mod l_buflen), LENGTH (p_text) mod l_buflen));

  END HTP_BUF_PRN;
  >

  He hit me with that feeling of "why didn't I think that!

  I hope this helps.

  See you soon

  Ben

• Choose the UTF-8 character encoding

  I've had problems in the last two weeks, resulting in the page crashes, Force stops, restarts, and I have no idea of what was the cause. I have updated Flash and Java and Mac. DoubleClick/eBay javascript files have appeared on my desk, for unknown reasons. In desperation, I decided to change coding in Safari in Unicode UTF-8, and for this reason, or as by chance, the problems seem to be outstanding. Cause or coincidence? Can anyone shed any light my way?

  Furthermore, I tend to use the values by default as much as possible because I don't know what my meddling would do.

  I know that Unicode is an important choice developers must take into account when writing pages but it's a good choice for end users like me? It choose in preferences does web pages behave differently in Safari?

  Nowadays almost all web pages should have code in it that tells all browsers to automatically switch to utf-8 or other coding.  Default for th browser settings have no effect when the author of the web page mistakenly forgot to include any character set = statement in his code.  So, normally, it would be unimportant.  But if it helps with the pages you look at, by all means use it.

  Another possibility is when a page is on a badly configured server that tells the browser to use a set of different characters, such as Latin 1, when the page is labeled utf8.  I hope that should also be very rare these days.

• Remove a character from the default screen

  I just added a character. I would like to return to the default screen (any character) but I can't find all the information on how to do it.

  -Add-ons > appearance, select default.

  • See-> characters and themes of management

  See also-> finding your Firefox version

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Why an old conversation keep appearing in messenger which is timestamped recently with no message

  recently, an old conversation with someone that I don't text more guard appearing at the top of my messages in messenger. It is time stamped recently, but there is literally no messages in there either. This doesn't happen with any other conversation that I wonder why this happens.

  It could be because the person is checking on messages. Or maybe a message has not been sent correctly, if it bothers you, you can hide the conversation

• How to put in the start page url with the | character?

  I want to open as the three starting pages. One of them has the | character in the address. This causes bad behavior: firefox use the same character as the delimiter for the opening of several pages. Is there a way to "escape" that character?

  Operating system

  Windows XP

  percent7C I think

• Character styles do not work in Pages

  I'm on a MacBook Pro (13-inch, mid-2014, retina), running 10.10.5 (14F1021) and run pages v. 5.6.1

  It's pretty simple: I'm searching the internet apple documentation and Web sites.

  To the title of the pane 'format' to the right of the workspace, there is an option below 'police' called 'Styles of character ".  There is no way, in this latest version, to create a new character style.  No selection there will allow you to press the symbol '+', and there is no menu in the menu bar you option to create a character style.

  Despite trying several ways of dozens to understand this point, there is no work around.  I think it's a bug.

  Please fix this Apple?  I love the pages, but boy, this can be frustrating.

  Thank you!

  I use Pages on El Capitan 10.11.1 v5.6.1. I can define a character style.

  Try the following:

  1. Type a word or two. Select them.
  2. Press command + T to launch the Panel font
  3. In the toolbar, click the selector bar and in this menu, choose color
     1. Choose red
     2. Unique, choose the menu bar (you now have a single, red strikethrough)
  4. Selected always your text
     1. Click Character Styles picker
     2. The + symbol is now blue
        1. Click on + to add
        2. Change the new name of red bar, then press return to set.
     3. Click on any character Style
     4. Click the character crossed Red style to test.

  If you want any style of character custom for later use, you will need to make a custom template for new documents, or simply a model of style that you can open separately and then using the Format menu, styles of copy/paste between your model as well as the current document.