To find variables of the PSP created .exe application

Similar Questions

• Helps to resolve the error sass.exe - application application faild to initialize properly (oxcoooo142)

  Original title: isass.exe - application error application faild to initialize properly (oxcoooo142) click on ok to end now screen black with white arrow will not even stop what should I do

  Reference Dell Dimension 4700c Ihave try F8 F1, f2, F12, and it immediately go to the same arrow Ihave try recover disk nothing sameone please help me

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you follow the steps in troubleshooting the article mentioned below and check if it helps:

  Computer stops responding with a black screen when you start Windows XP: http://support.microsoft.com/kb/314503

  Hope this information is useful.

• I get the message: "svchost.exe - application error__the instruction at '0x001a3ae7' referenced memory 0x00000000__the memory could not be read."

  Original title: svchost.exe - application error__the instruction at '0x001a3ae7' referenced memory 0x00000000__the memory could not be read.

  error svchost.exe - application

  the instuction at '0x001a3ae7' referenced memory at 0x00000000 the memory could not be read

  Click ok to finish, click on Cancel to debug

  No matter who I click it freezes my computer

  How can I fix it?

  This error is as malware... Hmmm.

  Try this malicious tool by MSFT remover:

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  Also, I found a little interesting tool:

  How to determine which services are running under a SVCHOST. EXE process
  http://www.bleepingcomputer.com/tutorials/tutorial129.html

  THIS should give us a LITTLE more information.

  Young people and learning... Have mercy

• String to the Variable of the PSP?

  Hello

  I was hoping I could buid programmatically a variable path shared and then use the Reading Variable VI to read a value.

  Unfortunately, while I can convert a PSP Variable in a string, I can't do the reverse. The output of the string to the shared Variable VI is not recognized by the Reading VI Variable. I tried to convert it to a PSP Variable to help more class specific, but she would not allow LabVIEW or the other.

  

  Is there a way to convert a string to a variable that is shared by program readable?

  Thank you!

  DUH... I can use the Container Seach VI, as the beginning of my posted code... X_x * slinks away in embarrassment *.

• "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

  "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

  Hi Jack,

  This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to create a session variable in the Apex?

  Hello dear colleagues,
  
  Is there a person know how to create a session variable in the Apex?
  
  How to get them?
  
  Thank you
  
  Best regards

  Hello

  No problem, PS don't forget to mark messages as 'useful' or 'correct', if you did infact find them useful or correct ;)

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd

• Programmatically create an appointment: missing variable in the container of result

  Hello world

  For my purpose of tests, I need to programmatically create a sequence. In this sequence, I need to insert steps from Rendezvous.

  Everything works very well when they are created, but when I run the sequence / stages created this error always appear for the appointment stage:

  • Unknown variable 'TimeoutOccured '; Error in the item "Result.TimeoutOccured".

  According to using TS, this variable must be created when I set up stage of the operation to date. Drag and drop step of inserting TS palette works very well, and the variable is created when you select the operation "appointment". But when you do the same thing through programming, the variable is not created.

  Here are the steps performed to create the Appointment stage:

  1. I have create a new step by using the Engine.NewStep method
  
  
  2. I put the name of the step using Step.Name
  
  
  3. I put the properties of an appointment using a statement (Parameters.BranchesRendezVous.RDVStep is the variable holding the reference of step):
  
  
  • Parameters.BranchesRendezVous.RDVStep.AsStep.Operation = 1, //A value that specifies the operation of the step to perform. Valid values are 0 = crΘer, 1 = Rendezvous and 2 = Get Status
  
  
  • Parameters.BranchesRendezVous.RDVStep.AsStep.NameOrRefExpr = Parameters.BranchesRendezVous.RefName, //Contains the expression name Rendezvous for operation of creation and expression name Rendezvous or reference for all Rendezvous operations
  
  
  • Parameters.BranchesRendezVous.RDVStep.AsStep.TimeoutEnabled = False, //The Timeout allowed for the operation of Rendezvous
  
  
  • Parameters.BranchesRendezVous.RDVStep.AsStep.ErrorOnTimeout = True, //The Timeout causes Run-Time Error for the Rendezvous operation
  
  
  • Parameters.BranchesRendezVous.RDVStep.AsStep.RendezvousCountExpr = Parameters.NbBranches, //The expression number of Threads by appointment for the create operation
  
  
  • Parameters.BranchesRendezVous.RDVStep.AsStep.Lifetime = 3, //A value that specifies the lifetime setting to use for the create operation. Valid values are 0 = same as sequence, 1 = even as a thread, 2 = use reference object, and 3 = same as execution
  1. 4. then I insert the step in my current sequence by using the Sequence.InsertStep method

  Everything works fine, the appointment stage is perfectly created and all the properties are set finely. However, the TimeouOccured variable is missing in the container Step.Result (help says TS that this furniture exists when the step is configured as a date (see operation = 1)).

  I'm doing something wrong somewhere? Why did this variable missing?

  You probably need to create the property programmatically using NewSubProperty().

  -Doug

• where can I find the file "spupdsvc.exe.

  I am running Windows XP Home Edition and cannot install the update to Windows (KB898461). The challenge is to go to the system 32 folder and find the file "spupdsvc.exe. My Windows XP program has no file of this type and I'm stumped. Is there another difficulty out there who does not have the spupd file or is it possible to import only one file in my program?

  Thanks, Terry

  Maybe a problem with your version of XP. You can avoid the error by masking the TI-

  1. click on start, point to all programs, and then click Windows Update or Microsoft
  Update.
  2. click on customize.
  3. Click to uncheck the box next to the update you want to hide.
  4. expand the update you want to hide, and then click on the "don't show me this update again.
  Once again"check box.
  5. click on review and install the updates.

• After download of Internet Explorer 8 I can't open all the icons in the control panel. On display is come information that Windows cannot find 'C\WINDOWS\system32\rundll.32.exe '.

  Dear Sir/Madam,

  Yesterday, I downloaded Microsoft Internet Explorer 8 web from Microsoft Download Center.

  After downloading Microsoft Internet Explorer 8, I can't open any icons in the control panel.

  On display is come information that Windows cannot find 'C\WINDOWS\system32\rundll.32.exe '.

  Help, please. Thanks Gene.

  Thanks Gene.

  Dear: :

  Running sfc/scannow will not replace the missing rundll32.exe file.

  Why you post methods that do not work and will be just wasting time?

  Hove you never even seen this problem before, tried to recreate it so that you can actually see, or have you never really fixed?

  Why you learn not what sfc/scannow does and does not do?

  Here is a simple test to you and all your colleagues in the technical support engineer:

  Rename or delete just your c:\windows\system32\rundll32.exe file is "missing".

  Rename rundll32.exe---> rundll32.xxx

  If you started normally, before you can blink, the 'missing' rundll32.exe file quickly and quietly replace the copy in the dllcache folder.  It is the Protection of Windows file in action and you will see something like this in the Event Viewer log system:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64002
  Description:
  File replacement was attempted on the protected system file c:\windows\system32\rundll32.exe. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5512.

  I beg you to perform this simple test to know how the sfc/scannow:

  Boot your system to Safe Mode or the recovery for the Windows File Protection Console does not run.

  For this example, we will use the system critical file rundll32.exe.

  Rename or delete your c:\windows\system32\rundll32.exe.exe file so the file is now "missing."

  A critical file, is it true?  It is on the list of the file 3498 knows the Protection of Windows and SFC files, but now he isn't.

  If Windows File Protection is running, the "missing" file would be quickly and silently replaced (try to rename or delete it in normal mode and it will be quickly and quietly replaced).

  Now, with your file rundll32.exe missing, start in Normal mode and try to use something like control panel to open something like Power Options and you'll see that familiar message:

  Control Panel
  Windows cannot find 'C:\WINDOWS\system32\rundll32.exe '.  Make sure you typed the name correctly and then try again. To search for a file, click the Start button, and then click search.

  Now you have recreated a common problem with the missing file and seen the error of our own eyes.  A Microsoft Support Engineer will usually suggest running sfc/scannow for this kind of problem, but it will not work or help and you can prove it to yourself, and now you have reproduced the error.

  You follow own advice and run sfc/scannow to the end.

  The rundll32.exe is always had disappeared, right?  Did run sfc/scannow replace the missing critical system file?

  How can he be so sfc/scannow is supposed to replace the missing system files?  This is because it is not this that sfc/scannow does.

  Now you know sfc/scannow does not.  He did not replace your missing system file (don't forget to put your rundll32.exe back so you will have a).

  Now, go to c:\windows\system32\dllcache and delete or rename the file rundll32.exe from there - and it will be gone and not replaced automatically because the Windows File Protection does not seem after this record.

  Run sfc/scannow in full again.

  Replace the file rundll32.exe missing in the dllcache folder, since it handles missing files (not the system32 folder) IS the folder that sfc/scannow.

  Now you know sfc/scannow does.

  Do you need help to know too much about the corrupt system files?

  Since most people do not have a genuine XP bootable installation CD, they will not be able to develop a copy of the file that is missing from the installation CD, they have not.

  After some directions on how to replace the file when the user has no XP bootable installation CD authentic and that will be useful to all.

  If you don't know how to say "I don't know how" and I'll help you.

  You want to inform/warn the poster that SP3 is installed that running sfc/scannow will take a long time for the installation of SP3 CD?

  If you do not have a CD with the same Service Pack as your installation (most people don't), the posters are in for a rough and frustrating time.

  Of course this will help with the detachment of the Ministry of Education of the impossible to try things that don't work, but I thought I'd throw it out there for the 100th time.

• XP to start, get the message "Windows cannot find C:\WINDOWS\System32\Tools\DelFoders.exe".

  When I start my computer, apearing this message Windows can't find C:\WINDOWS\System32\Tools\DelFolders.exe

  What can I do?

  Although what follows is 5 1/2 years, it looks like something, you should study.  Look for the message by "Savel'evna" part to the bottom of the page: http://www.pcreview.co.uk/forums/windows-cannot-find-c-windows-system32-delfolders-exe-message-t532088.html

• Search for XP Dskcache.exe tool. All I can find is for the year 2000.

  Search for XP Dskcache.exe tool. All I can find is for the year 2000.

  Hello

  1. were you able to use the Dskcache.exe tool earlier?
  2. did you last changes made on your computer before this problem?
  3. which edition of windows XP you are using?

  You can see the article below which might help you.
  Get the Dskcache.exe tool to configure the Write Cache option "Power Protection.
  http://support.Microsoft.com/kb/811392

• All of a sudden Outlook Express cannot find the files created by the method of attachment.

  Outlook Express cannot find the newly created files to attach. The files are there in My Documents and Outlook Express can still see all the old files, but each new file for the last month is not seen and cannot be attached. I even typed in the name of the file and it says can not find the file of the same name. I send you the files now through 'Send it' a service online, but complicated to use another program. I checked the 'views' and they seem ok. Help, please!

  It is a long shot, but try it in a new identity.

  File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  How to create and use identities in Outlook Express
  http://support.Microsoft.com/?kbid=209169

  Bruce Hagen ~ MS - MVP [Mail]

• Windows cannot find the file setup.exe on the CD,

  Windows Vista cannot find the file setup.exe on a CD, or I see using File Explorer

  Is there an autorun.inf on the CD?

  If so, try it.

• How to create a file name variable with the County and the date?

  Objective: Create a file name variable with the County and the date

  Error: get a lot of error. Do you know how to change my code?

  Question: how to create a file name variable with the County and the date?

  Mini code:

  std::string * rawfilepath;
  std::string * rawfilename;

  rawfilepath = "./shared/documents/";
  RawFileName = rawfilepath + 'rawlog -' + 0 + '-.txt ';
  QFile file (rawfilename);
  If (file.exists ()) {}
  rawfilenamecount ++;
  RawFileName = "./shared/documents/rawlog-" + rawfilenamecount + "-.txt ';
  }

  Thank you for your attention,

  Thank tzander reminding me the idea. Method of cascades is not good for me because all of the kernel code is written by Native. If I change the channel to QString, I need to change a lot of codes.

  Solution is below.

  While (access (rawfilename, F_OK)! = - 1) {}
  rawfilenamecount ++;
  sprintf (format, RawFileName, rawfilenamecount);
  fprintf (stderr, "file exists");
  }

  Rawlog = fopen (rawfilename, "w"); Save the file in a specific path.
  fprintf (rawlog, "System Time (ms)" "");

• you want to ask if where can I find or download the exe from the downloaded adobe photoshop and flash professional after downloading using adobe cc. I just want to have a copy for offline installation.

  you want to ask if where can I find or download the exe from the downloaded adobe photoshop and flash professional after downloading using adobe cc. I just want to have a copy for offline installation.

  Hello

  This link may help Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  Please do not forget to follow the "important Instructions" on the page (required by Adobe) for direct links work.

  It could be useful!

  Rayyan