to get the combination of code in the transaction of screen - AR

Similar Questions

• How to get the orientation angle screen with 40 Hz stably without delay to sync?

  Goal: Get orientation angle screen at 40 Hz stably without delay for synchronization.

  Problem with two situations:

  1. When you use the bbutil_swap and navigator_event_get_orientation_angle (event) to get the orientation angle screen with other data such as acceleration sensors and gyroscope data, the sampling frequency will be low grade at 10 Hz randomly. The difference of synchronization will increase from 25 ms to 100 ms.

  2. when the screen orientation angle is collected in the following code to get the angle only, the difference in timing of sampling will be 1, 2 or 5 seconds at random.

  Question: How do I get the orientation angle screen with 40 Hz stably without delay to sync?

  or something wrong in my code?

  Mini code:

  public static void handleNavigatorEvent(bps_event_t *event) {}
  switch (bps_event_get_code (event)) {}
  case NAVIGATOR_ORIENTATION_CHECK:
  navigator_orientation_check_response (event, true); If not the line, no updates on the screen rotation.
  angle = navigator_event_get_orientation_angle (event);
  break;
  case NAVIGATOR_EXIT:
  stop = true;
  break;
  }
  }

  public static void handle_events() {}
  for(; ) {
  bps_event_t * event = NULL;
  If (BPS_SUCCESS! = bps_get_event (& event, 0)) {}
  fprintf (stderr, "bps_get_event failed\n");
  break;
  }
  If {(event)
  If (bps_event_get_domain (event) is {navigator_get_domain()})
  handleNavigatorEvent (event);
  }
  } else {}
  break;
  }
  pthread_create (& t1, NULL, (void *) & rawacceleration, NULL);
  }
  }

  int main (int argc, char * argv []) {}
  screen_create_context (& screen_cxt, 0);
  bps_initialize();

  {If (EXIT_SUCCESS! = {bbutil_init_egl (screen_cxt))}
  fprintf (stderr, "bbutil_init_egl failed\n");
  bbutil_terminate();
  screen_destroy_context (screen_cxt);
  return 0;
  }

  If (BPS_SUCCESS! = screen_request_events (screen_cxt)) {}
  fprintf (stderr, "screen_request_events failed\n");
  bbutil_terminate();
  screen_destroy_context (screen_cxt);
  return 0;
  }

  If (BPS_SUCCESS! = navigator_request_events (0)) {}
  fprintf (stderr, "navigator_request_events failed\n");
  bbutil_terminate();
  screen_destroy_context (screen_cxt);
  return 0;
  }

  Rawlog = fopen (rawfilename, "w"); Save the file in a specific path.
  fprintf (rawlog, "Absorption system, Angle\n");

  navigator_request_events (0);

  While (! shutdown) {}
  handle_events();
  bbutil_swap();
  }

  closeshutdown();

  return 0;
  }

  Thank you for your attention,

  Using SENSOR_TYPE_ORIENTATION of sensor_type_t , you should be able to get > 10 Hz.  Use sensor_set_rate() to get the slower delay to call sensor_info().  Make sure not to enable sensor_set_skip_duplicates().

  However get the orientation at the 40 Hz streaming will not make your application any repsonsive more.  The only way to make your app more would be to manage the orientation change in a short period of time.  This is the time when orientation changes (at the hardware level), to receive you and to deal with it.  It is usually a constraint system and there is not that you can do about it.  What you see using the code above is the same information repeated over and over; FACE_UP, FACE_UP, FACE_UP, which is not really useful.

• Get the two login screen when using the api of payment

  Hello

  I get the extra login screen when you use the payment api.

  When I pressed the button buy a login screen is displayed which is OK.

  After I get the connection information and tap on buy buy button is successful.

  Next, I check the purchase by calling the checkPurchase() method.

  After that, I see the login screen again...

  Here is my code...

  public PurchaseProduct (String product) {}
  TODO auto-generated constructor stub
        
  SKU = product;
  name = product;
        
  If (engine! = null)
  {
  engine.setConnectionMode (PaymentEngine.CONNECTION_MODE_LOCAL);
  PurchaseArgumentsBuilder arguments = new PurchaseArgumentsBuilder()
  .withDigitalGoodSku (sku)
  .withDigitalGoodName (name)
  .withMetadata (name);
  Try
  {
  Purchase purchase = engine.purchase (arguments.build ());
  Dialog.Inform ("purchase is successful.");
  }
  catch (IllegalArgumentException e)
  {
  Dialog.Inform (e.getMessage ());
  }
  catch (PaymentException e)
  {
  Dialog.Inform (e.getMessage ());
  }
  }
         
  }
     
  public boolean checkPurchase (product of the chain)
  {
  Try
  {
  Purchase [] = engine.getExistingPurchases (true);
             
  If (purchases.length! = 0)
  {
  for (int i = 0; i)< purchases.length;="" i++="">
  {
  If (Purchases [i] .getDigitalGoodSku () == Product)
  {
  Returns true;
  }
  }
  }
  on the other
  {
  Dialog.Inform ("not bought");
  }
  }
  catch (PaymentException e)
  {
  Dialog.Inform (e.getMessage ());
  }
  Returns false;
         
  }

  Thanks in advance...

  Hi pprateek,

  The behavior you describe, is what one would expect in this scenario. No matter what time you want to retrieve App World a user related information, you will need to provide their credentials.

  The first pop-up would happen when you call to the:

  Purchase purchase = engine.purchase (arguments.build ());

  Note that, if this succeeds, the object returned toPurchas will contain information about the purchase that was just to finish. This object can be used to check the details of the purchase that has just occurred.

  http://www.BlackBerry.com/developers/docs/payment/1.0api/NET/rimlib/BlackBerry/API/payment/PaymentEn...

  The second login screen happen when you call:

  Purchase [] = engine.getExistingPurchases (true);

  Depending on the application, the same credentials of App World cannot always ask. So if you ask that existing App World a user purchases, you will need to enter their credentials. As well for security purposes (I guess), someone buys an article is not necesserily because he agrees immediately to have additional details about their account recovered.

  The famous buy may be asked to confirm the details of your current purchase, and if you want to get a list of all current purchases, the user must enter their credentials again.

  Erik Oros

  BlackBerry Development Advisor

• How do I get the normal home screen on the Mac Pro?

  I upgraded the graphics card in my 2008 Mac Pro, which has also bootcamp, but now when I want to switch it to Mac OS X I have graphics cards, boot in OS X with my OS X disk selected, restart and then it will stay, instead of being able to hold down the option key pressed during boot to get the drive selector. Is there a file I can change so that I get the Apple boot screen and the drive selector?

  Sounds like replacing the graphics card is a regular PC and not a Mac-Flash card. Only one Mac-Flash card will show a splash screen and allow the use of the Option, special recovery and other startups.

  Some mac-flashed it maps to select the PC or Mac equipped with a switch mode

  Do you have what graphics card installed?

• I get the windows login screen and I do not know the password for administrators

  I accidentally deleted my account and when the computer starts and I get the windows login screen and I do not know the administrators password. Also how can I reinstall windows when I got a disc when I brought my laptop. Thank you, Lorraine

  Thanks for getting back to me. I sold my old laptop to my son-in-law, and he asked me to remove my name from the computer off so that my name wasn't on the screen all the time. so I deleted the profile of cook of lorraine and made one for him, but I didn't give it a password. then I realized what I had to do (I got Lorraine where time is on the bottom of the screen), but was unable to highlight to remove it without a mouse. so I plugged a mouse, but the computer does not read, then I restarted the computer. When I restarted, all I could get was the windows login screen.

  then I typed in the name son-nlaws and they said that he was kidnapped, tyoed in mine and got the same and then typed in Administrator, but did not know the password. I have since reinstalled windows. XP Professional would not install saying a file was missing, so I installed xp family and is working again. He just has to click on what edition it wants to run. Professional XP of course happen just with the display of connection... but it can use again.
  Thank you once again, Lorraine

• Get the Blue error screen when starting the computer XP, stop: 0X0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  I get the same code at startup until you mean?    Stop: 0x0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  0x7B bug check code
  http://msdn.Microsoft.com/en-us/library/ff559218 (v = VS. 85) .aspx

  The boots are sometimes successful and sometimes not?

  If you you do not want to lose any data, make sure you take a backup on removable media before trying to solve the problem.

  Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.

  Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.

  If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.

  However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.

  What is your computer brand and model? You have a Windows XP CD? It's a detail. Generic OEM or OEM brand copy. Suppliers of computers brand often give users a copy of Windows to a recovery partition. That applies to you?

  Take a look in the system log in the errors and warnings event viewer and post here the copies. Do not post on more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

• Every time (for weeks now), I click Site Preview in the browser I get the white/white screen and no url...?

  I can't find someone through Google or forum here get the same problem but me drivin frustrated grrr and obviously hinders my workflow.  All PLS knows how to solve this problem?  There is no Preview parameter, that I can find anywhere and my browser settings Chrome etc. have not changed and don't know what to do help!

  THNKS

  -Sterling Williams

  The first step, at least in a copy of your .muse file, in order to eliminate the possibilities, remove all custom code and others. If the problem goes away, then you know where to look for the problem. If it isn't, then we have reduced considerably the possibilities that must be taken into account and we can look at some areas less likely.

• Portege Z10T and Win7 - can't get the auto rotation screen

  Hello

  I installed windows 7 to a Portege z10t and can not get the screen auto rotation time reversed the portrait and landscape, I had a quick glance in the chart properties intel and cannot find anywhere them for this set up ideas and Googled it.

  Any ideas?

  Thank you

  Hello

  Are you sure that you have installed all the tools essential to Toshiba and utilities like Win 7 drivers for this series Portege Z10T?

  Driver Toshiba UE page provides the essential as software * easy Control.* Tablet
  This utility is required for the function of automatic rotation of the tablet.

  I recommend you to check if all the software available on the page of the Toshiba UE driver has been installed and working properly on your laptop

• How can I get the TestStand splash screen to not show up when I call the results treatment Utility offline?

  So I call the Offline processing Utility (ORPU) a not executable call results in a plugin to perform a personalised treatment in another configuration.  Everything works fine, including having run reduced (mostly hidden) by using the option/tray.  When he called, the TestStand splash screen appears (certainly is not a show-stopper but it's confusing from the point of view of the user).

  Is it possible that I can get this start screen to not appear when calling the ORPU?  I noticed in the help, mention is made of the use of the callback file, and I wonder if someone has successfully used this to avoid the dialog box or other behaviors.  I would like more info on how it works, but it doesn't seem to be a vast detail on this in the help, and I'm not also find me useful examples.

  The source of the Offline utility treatment results is included with TestStand and can be changed.

  The ORPU source is located under "Components\Models\TestStandModels\Offline utility treatment results"

  From the source, you can see that there is no flag that allows you to hide the splash screen (except for / I leave, but that it will also close the ORPU!); However, you can easily change the ORPU so it does not show the start screen by removing the following lines in \Components\Models\TestStandModels\Offline Results Processing Utility\OfflineResultsProcessingUtility\MainForm.cs

  If (! data.) Quit smoking)
  splashScreenForm = new SplashScreen (mEngine, false);

  Regarding the flags without papers, there are not really many flags undocumented in the ORPU (even once, you can see them in the source), and undocumented flags have very specific use cases (open files from shell and NEITHER internal regression tests).

  A (non-official) complete list of indicators ORPU from 2014 TS:

  /?
  Shows help

  / tray
  Starts the ORPU in the status bar

  / exit-when-done
  Exits when all files are made

  / I'm leaving
  Leave immediately

  /process - files - Missing - Data
  Treats the files even if they lack of data

  / which-process-files-Missing-Data
  Do not process files that are missing data, show only a mistake (it is the default behavior).

  / Process-All-Profiles
  Start all profiles

  / Process-No.-Profiles
  Don't start any profile

  / Process-Profiles
  Treat the profiles specified in the following arguments

  / process-files
  Add the files specified for the specified profile

  / log - level

  Sets the logging level for the newspaper ORPU, all of the messages above, the specified log level is saved.

  /ShellOpen
  It is an internal indicator, it is used to treat applications for the shell (for example, after a double click on a tsr in Windows Explorer). Do not use this indicator.

  / non-interactive
  It is an internal indicator used for the test. Do not use this indicator.

  Please note that NEITHER does not support appellant flags undocumented and that NEITHER is not guaranteeing backward compatibility of these flags undocumented and they could change at any time, without warning.

  For a more detailed explanation of the working of each option, refer to the Arguments of the command line Utility using TestStand treatment results offline.

  Hope this helps,

  Francisco

• How to get the Western Digital screen to appear without having seen the image of office as well.

  Original title: WD1TB MY book was installed with Windows XP and the deskyop "bleeds" through parts of the WD Menu. How can I get the WD screen appears without the office showing?

  WD1TB MY Book was installed with Windows XP and office "bleeds" through parts of the WD Menu. How can I get the WD screen appears without the office showing?  I can't read the instructions when this screen appears partially gray with the news of WD and the desktop showing through the other box of WD.

  Hello

  You can try to connect the WD 1 TB My Book on another computer running Windows XP and see if the problem still occurs.

  You can also get in touch with support from WD for assistance on the issue.

  Contact us Support WD

  http://support.wdc.com/contact/index.asp?wdc_lang=en#us

  WD community

  http://community.wdc.com/T5/my-book-for-PC/BD-p/BoardExample

• Why do I get the "open with" screen every time I try to open a program?

  Whenever I try to open a program it shows full-screen. As for example... I opened firefox and it comes up with the open with screen so I take the option of firefox, then it said Open firefox.exe. He said: ' you have chosen to open firefox.exe which is a: application to: C:\program files\mozilla firefox would you like to save this file? "so I press Cancel because it's my only option and then I can use it. So if I try to open anything up as OBJECTIVE online, I get an error message saying "application not found" I push OK and then work.

  Hello

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  1. try the steps listed in the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Firefox does not appear in "partial" mode I can't get the display full screen or reduced display, not the intermediate partial screen window.

  The 'partial screen' icon does not work. When it is selected, the screen is reduced to the minimum. (Hover displays the text 'restore down', that doesn't look right.)

  When the screen is reduced to a minimum, I have to hover over the preview, right - select optimize for any screen at all, and it's the display full screen.

  Difficulty? I tried to uninstall/re-install has not fixed the problem.

  Hello rclacher, try this to reset the settings of user interface in firefox: go in firefox > help > troubleshooting information, click on file/show profile folder and close all firefox windows later. a windows Explorer window should open upwards - in there remove the file named localstore.rdf - it will be regenerated the next time you launch the browser.

• Hi I am currently subscribed to PS CC but I don't think I have the latest version.  I believe this because I do not get the new Welcome screen and no new feature as structure and color in the content aware patch tool.  I checked for you

  Hi I currently have a subscription to the CC PS, but I don't think I have the latest version.  I think this because I don't you the new Welcome screen and do not have new features such as the structure and color in the content aware patch tool.  I checked the updates and it tells me I have the current version.  I check in PS I version 14.2.1.  I also have CS6 installed on my PC, it could be somehow be do something or I'm doing something wrong.  Anyone have any suggestions.

  It's under 'find new applications '.  You must scroll down to see it.

  

• Get the Blue error screen: "error of Page in the nonpaged area".

  Original title: Page fault

  I get a blue screen Page fault in non paged area... just above what it lists win32k.

  I get this error when you create a new contact in Outlook or by using Firefox.  I can use IE 8 without any problem.  Do not know what is causing this problem.

  LJ

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

  http://msdn.Microsoft.com/en-us/library/ff559023%28VS.85%29.aspx

  Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can watch the discharges with the debugger and to see the cause of the accident.

  André

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Get the Blue error screen when entering Sleep Mode

  Original title: BSOD

  I get BSOD a few times of the day when my computer enters "sleep".  I guess it is driver related but is unable to identify the culprit. I use BlueScreenView and on some files .dmp lists as the "caused by driver" ntkrnlpa.exe on others, it lists tcpip.sys.  Can I download files .dmp full if someone can give me an idea on how to solve this problem?  Thanks in advance.  Vista by the way.

  Hello

  BSOD CAUSE tcpip.sys which is a component of Windows that means something else, he drove in error.
  The question is usually the network drivers used and/or antivirus/antispyware/security programs.

  -----------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.