NB250 ask password when the system recovery

Similar Questions

• In the System Recovery Options administrator password?

  Hello dear users of Toshiba.

  I'm willing to use the "Toshiba Recovery Wizard" in the "System Recovery Options" (after pressing F8 when the computer starts) but when I select Administrator as a user, he invites me for a password.

  I double checked my Vista user accounts and the administrator (me) is certainly not no matter what password that are bound to him.
  My problem is that I can't use recovery tool if I don't log in as an administrator...

  Can someone please help? Y at - it factory default password?

  Thanks to you all!

  Hello

  To be honest, your announcement confused me a bit especially the part where you wrote: but when I select Administrator as a user. I don't understand what you mean with it.
  But first some basic information:

  Can you imagine you use Toshiba notebook with the settings and someone will make a joke and use the F8 option and reinstall Vista. All of your settings, data and pre-installed software will be gone. Or can someone just use cell phones stolen to get around Vista secure password for laptop and do clean install of Vista using F8 option.

  To avoid this Toshiba has this security feature and each try to reload Vista password OS will be refused. So if you use the password to log in to Vista the same password will be required before the installation of recovery begins. By default, there is no password and the name of the administrator account will be shown when you start the recovery procedure. When you enter the correct password, the installation will continue.

  So much about the theory. I don't know how you do and which account you use, but the fact is, without administration account name and correct password, you won't be able to install Vista using this HARD drive recovery option.

• Cannot access the System Recovery Console invalid password

  System Recovery Console insists that I use a "invalid password". I installed Win7. I make a written record of all used passwords so I'm sure I know the password I put in the first place; It is a simple word, that I always use for low security situations.  However, I tried all variants of logics of this password (upper and lower case, etc.), but nothing works.  I loaded 'ophcrack LiveCD' and found that the password is .  I tried to use no password and this also fails.

  What can I do to pass in addition to "invalid password" so I can't enter the System Recovery Console?

  Thank you.

  Hey Ron,.

  I finally got some time to focus on this and learned something that could explain the difficulties you encounter!

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  It seems that the Recovery Console has been taken from Windows Vista (and 7). Personally I did not know this, but then again I don't use it every day! :) So in short, it is not designed to work with Windows 7, and this issue is the result of this.

  Sorry it took me so long to find! I hope that answers your question!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could use a little help from the system recovery

  My son has a HP DV something 21XX Entertainment laptop computer running XP. He had some serious spyware that I couldn't get cleaned up and I "discovered" restoration of the system using the F10 key. I did it. He acted as a whole new computer I have registry and all. I had assumed that he had whipped the own HD. However when I tried to update XP it said I didn't have the room. And of course a 'C' drive it's full of things. So now I'm a bit lost and I was wondering if there is a guide step by step somewhere (yes I should have asked prior to taking title).

  1. I see as well a C drive and a system recovery disk. Who now works or how can I say.

  2. I'd like to if I don't lose any of his stuff. Actually I'm passing some of them to my external drive for 'safe keeping' if all goes well

  3. I have not been able to get on the net wireless, but have been wired. That is probably an update is necessary? It shows my network and that I am connected, but it won't actually show anything "page not found".

  4. I download some spyware now so I can check my system restore it cleared out.

  For any help or suggestion or pointing me in the right direction would be appreciated.

  BTW, my son computer is a few years old and was one of the models who had the bad mother and HP the extended warranty on. They did replace the MB warranty (about 16 months after purchase). It's quality service and I have so I have several brands of laptops, I'm not yet ready to upgrade sound, if I do not.

  Thanks again!

  Sdallnct wrote:

  My son has a HP DV something 21XX Entertainment laptop computer running XP. He had some serious spyware that I couldn't get cleaned up and I "discovered" restoration of the system using the F10 key. I did it. He acted as a whole new computer I have registry and all. I had assumed that he had whipped the own HD. However when I tried to update XP it said I didn't have the room. And of course a 'C' drive it's full of things. So now I'm a bit lost and I was wondering if there is a guide step by step somewhere (yes I should have asked prior to taking title).

  1. I see as well a C drive and a system recovery disk. Who now works or how can I say.

  2. I'd like to if I don't lose any of his stuff. Actually I'm passing some of them to my external drive for 'safe keeping' if all goes well

  3. I have not been able to get on the net wireless, but have been wired. That is probably an update is necessary? It shows my network and that I am connected, but it won't actually show anything "page not found".

  4. I download some spyware now so I can check my system restore it cleared out.

  For any help or suggestion or pointing me in the right direction would be appreciated.

  BTW, my son computer is a few years old and was one of the models who had the bad mother and HP the extended warranty on. They did replace the MB warranty (about 16 months after purchase). It's quality service and I have so I have several brands of laptops, I'm not yet ready to upgrade sound, if I do not.

  Thanks again!

  Hello

  Here is a link to the system recovery with much information.

  Your operating system runs from your C: partition. D: is the recovery partition.

  As far your Wi - Fi connection... going to try Google chrome or another browser to see if you can connect. There is a little bug in IE (I guess that's what you use) which may prevent it from connect to web pages.

  You have probably a Trojan or malware on the system. Try to go to www.ESET.com . Look on the right side under quick links and use their scanner online. It will find all things 'wrong' that is on your system and delete, if you may of course. As far as I know, they are the best in the business. Everyone has a favorite and this one is mine. I have install on the PC of the client frequently and for three years have never had a client complain about viruses, Trojans, adware or malware.

  Do not update your pc had SP2 before having to operate satisfactorily and have done a Windows system restore point.

  post your results (positive or negative) here in your thread so we know how it works for you.

  Kind regards

  ERICO

• recovery disk will not load error message pc not supported by the system recovery disk.

  had a virus that has taken possession of my PC and wanted the money order to the for free, so I install the recovery disk and chosen in advance and restored the pc at the time, he removed the hold and the system worked very well for a few days. then the system kept to self-extinguish. tried loanding the recovery disc and gave me the message pc not supported by the recovery disc, and now when start received bios award phoenix instead of the hp logo.

  attempted to run antivirus software but before he could finish short scan the pc shuts off I tried in safe mode and the same situation. I downloaded several antivirus programs, but it would still be closed the pc. I tried to install the recovery disk, and it gave me an error message pc not supported by the system recovery disk. now when I start up instead of the blue screen with HP logo, I get a bios award phoenix and other information that I can't copy down it goes too fast. Since I couldn't get rid of the virus, he took to a pc using store, they have removed the virus and loading of operating system vista, problem is I had the word and excel. Now, I can not get my desktop to factory oem computer. I really need my word that I have all my passwords for the accounts listed, I saved them to analyze the drive, but now I have not any other readers like drive j. Any suggestion on how to solve the problem, so I can load the recovery disc.

  Thank you very much

  Frenchquarter, welcome to the forum.

  I suggest that you download and install OpenOffice.  It is FREE and is open to all documents created in MS Office.  If it doesn't, at least it costs you nothing to try.

  I used OpenOffice for years.  Believe me when I say that he will do everything that will make MS Office and in some cases, the better.  At least, you will have to use in the future and you'll be amazed to see how they can do it for FREE.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• DV6-6c15nr, "the system recovery media does not support this computer."

  Hi all. I'm trying to reformat my laptop (dv6-6c15nr), but when I try to reformat to f11the recovery manager f, all options are such that the system restore and restore to factory is grayed out. The next thing I tried was a set of recovery disks. When I used the recovery disks, it showed the message "this computer does not support the system recovery media. You are not able to restore the system with the media. 0110 A601UA #ABA - A1U60AV. Why can I not reformat my laptop... I remember that I was able to reformat until I sent offshore to get the hard drive and the radiator replaced by hp year last April. Now I can't get to... that this has to do with anything? someone please help...

  I also tried without the bios downgrade F.19 REV: a. which do not help either.

  It seems that the motherboard may have been changed and the information system (tattoo) has not been updated to match that of your computer. While I can't fix this for you, I can suggest some possible solutions and I work to spare;

  (1) you can contact HP Customer Support and ask that they correct the problem.

  (2) attempt to control that recovery discs for the model of the motherboard is currently labeled as.

  (3) If you can still read the Windows product key of 25 characters on the Microsoft COA affixed on the computer, you can install Windows 7 using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 using the 25-digit key from the COA Microsoft on your computer.

  If you have any other questions, feel free to ask.

   

  Please click the White Star of KUDOS to show your appreciation

• NB500 - I can't do the system recovery

  Hello

  I got a nb500 Windows 7 starter and I cannot do a system recovery out-of-the-box.

  I tried "press 0 and power", the pc starts, but as long as I continue to press 0 nothing happens. When I release, it will continue to boot normally into windows. Also tried with f8, I can see the system recovery options, but there is no tool for HARD drive recovery there. I also used a toshiba recovery media Creator called program but when I start, it displays a message «there is no area of hard drive recovery»

  Any suggestions please?

  For some reason any there there no initial access to the recovery image.

  Either it is deleted or the partitions of HARD drive structure is changed and recovery tool cannot find the settings for the recovery image.
  Now, you have little problem. Recovery image installation will not work.

  You have two options:
  1 / you can try to install recovery disc original order of Toshiba - https://backupmedia.toshiba.eu/landing.aspx
  2 / you can install own OS version

  All readers, tools and utilities, you can find and download from the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• G72-250us: will not perform the system recovery

  After completing the formatting and by copying all the files on the three disks that I made, the recovery program sees no bootable device when restarting. The original hard disk drive (320 gb) cooked and I replaced it with a 250 GB ssd. Ant help or explanation would be appreciated.

  Hi there @caper84,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the system recovery. I'll be happy to help you.

  I found a lot of documents for this problem. Here are some help.

  Troubleshooting problems of recovery HP System (Windows 7)

  System recovery can fail or display error messages (Windows 7 or Vista)

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Portable CQ58, disk recovery "this computer is not supported by the system recovery media.

  Hello HP,.

  I have a laptop CQ58-bf9WM, which had Windows 8.1.  The 320 GB hard drive died and bought a new SATA 500 GB laptop.  had no CD recovery, went online, enter all the important information, serial No., model #, then purchased through HP recovery disk, received the CD (manufacturer 708896-001, 708895-001 708897-001) and put #1 disc in the CD started and that's what I get: this computer is not supported by the system recovery media.  You will not be able to continue to recover this system with these media.  "Error: 0100-169-1855-188 b" then you have the OK, then when you press OK, the laptop shuts down.  I pressed ESC on POST, then I tested memory and the new hard drive and they both passed.  HELP PLEASE!  Thank you

  Should not have anything to do with the new hard-both disk that is at least equal or greater than original ability, they work. It is 'possible' that you have received the wrong set of recovery.

  Thing of OE to check. Enter the BIOS by pressing F10 immediately after turning on (have to press ESC, then F10 to the menu). Is the serial number, model number.etc all intact?

• ThinkVantage Button takes me to the system recovery after HARD drive partition

  Hello

  I recently bought a W520 with 4 GB of RAM.

  I bought 3 branches of more than 4 GB each, installed and everything was fine. Also, I shrunk the C: drive and created a new disk (D:\) from space, that I rescued after the reduction of the volume.

  When I start the laptop and you want to enter the BIOS setup by pressing the blue ThinkVantage button, she won't go to the BIOS Setup. Rather, it passes through the system recovery options.

  What gives? How can I go to the BIOS Setup?

  Thank you in advance.

  Continuously when the system starts, press F1.

• Ran the system recovery and now all my pictures are gone

  Original title: photos of lost.

  my photos have disappeared since I ran the system recovery. Can I get back them?

  Original title: photos of lost.

  my photos have disappeared since I ran the system recovery. Can I get back them?

  Please tell us exactly what you mean by "system recovery." And exactly how you did.

  If you mean the system recovery provides the manufacturer of your computer, what it does is to restore the computer to the State it is in when it left the factory. Yes, all your photos and anything else put you on the disk is gone.

• Hi, not really a new Member, but I'm having difficulty with the system recovery.

  I have an Acer Aspire 7741Z, I know he's older. It has windows 7 Home premium on it. I guess the hard drive went bad because I replaced it and it seemed to work. I put the system recovery discs that I bought at Acer last week and it rises to display disk copy files and looks like it loads the images file. But then it stops and gives me an error message that says "do not copy the file to the HARD drive. File G:\Images\WOP000400OENSC121103. STORMWATER MANAGEMENT.  I'm not worried about record data at this stage, just try to get the computer to work.  I don't know if I was sent a 'bad' disc or what.  Any suggestion would be great.

  Alexa

  Good for you! I suppose that insufficient disk space might also explain why the installation stopped at the same place.

  Try typing F2 when you first see the Acer bios screen to get back into the bios menu. Make sure your new hard drive is first in the boot order. F10 to exit and save the settings.

  Jack E/NJ

• My system hangs during startup "for the first time" after running the system recovery.

  HP G62 - 227 CL

  Win 7 (64 bit)

  No error message, in itself; just a screen frozen on reboot.

  Months, my computer has suddenly started glitching on me.  I stopped and tried a reboot.  The system froze on start with flying colors.  System recovery tried several times but must have made a mistake because he wouldn't.  Resolved to buy a new hard drive and reinstall from the recovery disks.  Delayed unnecessarily until today, months later.

  Before you buy a new hard drive, has decided to relaunch the system recovery.  It worked!  I tried the option that has deleted everything and restored to the software and factory settings.  Everything seemed to work like a charm: hard drive reformatted, reinstalled software, the system prompted me to reboot.  Yes, I did.  Windows started to boot, "Preparting your computer for first use of Setup" appears... and freezes.  For hours.  Hard drive led is off.

  BTW, made sure the button Wi - Fi was on what I read on the problems of recovery if it was turned off when the program is run.

  Restarted.  Press F11.  A ran maintenance and checked the hard disk for errors.  There are errors.  Unfortunately, the default setting of CHKDSK does not repair them.   A opted for a command line.  RAND CHKDSK again with option '/ f/r' seen in other posts.  Here I am too ignorant to get the program to run properly, I guess.  I ran CHKDSK on the two player X and C.  No error found... sort of.  I know they exist because the system will not start.  (Yes, I tried again.)  Return to the command prompt, I tried to run CHKDSK on the drive C again.  This time I got a message that I must first dismount (remove?) the reader.  As I don't know what that means, I opted for the 'no' and have decided to post this help message.

  So.  Suggestions on what do I do then?  More specifically: How do CHKDSK to fix the errors it found?  I think the message was: "errors in $130 of the sector...". "It shows this message two times at the end of 62%.  Freezes for a long time.  Gets will still only slow down to a crawl again around 70%, but no longer.  Then returns to the start of system recovery screen.

  System recovery ran again for the pleasure.  Again, seemed to work like a charm.  Unfortunately, the laptop again sits frozen at "Preparing... for first use" screen again.  It heats more turns.  The audible fan works now plans higher... If none of this helps.  I am stopping and waiting for your advice.

  Thank you!

  Zac:

  My apologies for the delay to return to you.  Believe you that computer gremlins have not hit my very stable desktop which has been fine for years with sudden instability driver?  McAfee thanks for this most recent update!

  In any case, after several diagnoses and find the hard drive has failed in each of them, I decided to install a new copy of Windows 7 as a test while I wait for my upcoming recovery disks in the mail.  I did it by removing all partitions on the drive and do a fresh install.  Here again, everything seemed to go well until that (apparently) a certain area of the drive was used to save/installation of the files.  Even after CHKDSK runs several times (each time he repaired several defective sectors but stalled after only 10% of the disk) the system will become unstable - the last number being a blank screen after logging on to Windows.  So, all in all, epic fail on the side of the hard drive.  The new drive is installed and waiting for my recovery disks.

  Thanks for all your suggestions.  They have been a great help with information, but not with the results because of the training.

  M

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Using the "System recovery" Recovery Manager, it will erase the partitions?

  Hello, I was counting on the creation of a second partition for windows 7.

  What I want is two partitions one with windows 7 and one with vista. This is the easiest part.

  Now, I was planning on moving over my larger files, which is a lot of music and a lot of digital photos on the windows partition 7. Then, I wanted to clean install vista using the system recovery feature built into the computer. Now, I see it says restore my computer to default settings, but it's a little vague.

  So my question is, even with 2 separate partitions would be a system recovery remove them both and combine them into 1, just like when I got to my computer? Or would it restore my vista partition just like it was when I got it? I've really messed with the recovery of the system too, so I don't know if there is an option to select a partition, or something, I don't want to go overboard and remove my pictures and music.

  And there are a lot of things, like 50 + GB combined, it would take a lot of time to save it online, but if that's what needs to be done, so be it.

  Thank you!

  Also the laptop I use is a Hp pavilion Dv2500 with just vista on it right now.

  Hello

  The answer is no. The Recovery Manager has his job to do once tell you her to begin.

  The HP Recovery Manager will do its thing and restore your laptop provided that delivery. It is a destructive process in terms of all the space on your hard drive, except for the recovery partition. You will find yourself with a Vista partition (C and a recovery partition (D when it is done.))

  This means that when the recovery is complete and you have all the drivers loaded, you can use the Vista Disk Manager to create your partition in Win 7.

  I hope that this makes it more clear.

  Kind regards

  ERICO