To match the angle of the gradient to the path?

Similar Questions

• The package does not match the path of the file

  Why its wrong?

  Attached photos:

  

  

  gn_fla.com.flashgametemplate

  And try to avoid. (point) in folder names

  Keep it simply

  gn_fla.flashgametemplate

• How to change the angle of a gradient layer without changing anything else?

  How to change the angle of a gradient layer without changing anything else?

  When I try it myself my gradient everything turns black.

  To add to the above, you can just set the angle. If you want to use other existing parameters, you need to get from the layer. The code in this other thread shows a way to get them.

  But if you do not have the values for any other reason, you can get the handle to the layer, make a duplicate of it with all the settings and just crush those you want to change.

  It is a way to just change the angle while keeping the other existing settings.

  // helper function for working with descriptors
  function getProperty( psClass, psKey, index ){// integer:Class, integer:key
      var ref = new ActionReference();
      if( psKey != undefined ) ref.putProperty( charIDToTypeID( "Prpr" ), psKey );
      if(index != undefined ){
          ref.putIndex( psClass, index );
      }else{
          ref.putEnumerated( psClass , charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
      }
      try{
          var desc = executeActionGet(ref);
      }catch(e){ return; }// return on error
      if(desc.count == 0) return;// return undefined if property doesn't exists
      var dataType = desc.getType(psKey);
      switch(dataType){// not all types supported - returns undefined if not supported
          case DescValueType.INTEGERTYPE:
              return desc.getInteger(psKey);
              break;
          case DescValueType.ALIASTYPE:
              return desc.getPath(psKey);
              break;
          case DescValueType.BOOLEANTYPE:
              return desc.getBoolean(psKey);
              break;
          case DescValueType.BOOLEANTYPE:
              return desc.getBoolean(psKey);
              break;
          case DescValueType.UNITDOUBLE:
              return desc.getUnitDoubleValue(psKey);
              break;
          case DescValueType.STRINGTYPE:
              return desc.getString(psKey);
              break;
          case  DescValueType.OBJECTTYPE:
              return desc.getObjectValue(psKey);
              break;
          case  DescValueType.LISTTYPE:
              return desc.getList(psKey);
              break;
          case  DescValueType.ENUMERATEDTYPE:
              return desc.getEnumerationValue(psKey);
              break;
      }
  };
  function duplicateDescriptor( descriptor ) {
      var newDescriptor = new ActionDescriptor;
      newDescriptor.fromStream( descriptor.toStream() );
      return newDescriptor;
  };
  function localizeDescriptor( desc ) {
      var stream, pointer, zStringLength, zstring, localized_string, newZStringLength, previousStream, followingStream, newDesc;
      stream = desc.toStream();
      while( true ) {
          pointer = stream.search(/TEXT....\x00\$\x00\$\x00\$/);
          if( pointer === -1 ) {
              break;
          }
          zStringLength = getLongFromStream( stream, pointer + 4 );
          zstring = readUnicode( stream.substr( pointer + 8, ( zStringLength - 1 ) * 2) );
          localized_string = ( localize( zstring ) ) + '\u0000';
          newZStringLength = localized_string.length;
          previousStream = stream.slice( 0, pointer);
          followingStream = stream.slice( pointer + 8 + zStringLength * 2);
          stream = previousStream.concat( 'TEXT', longToString( newZStringLength ), bytesToUnicode( localized_string ), followingStream );
      }
      newDesc = new ActionDescriptor();
      newDesc.fromStream( stream );
      return newDesc;
  };
  function getShortFromStream( stream, pointer ) {
      var hi, low;
      hi = stream.charCodeAt( pointer ) << 8 ;
      low = stream.charCodeAt( pointer + 1 );
      return hi + low;
   };
  function getLongFromStream( stream, pointer ) {
      var hi, low;
      hi = getShortFromStream( stream, pointer) << 16;
      low = getShortFromStream( stream, pointer + 2);
      return hi + low;
  };
  function readUnicode( unicode ) {
      var string = "";
      for( i = pointer = 0; pointer < unicode.length; i = pointer += 2) {
          string +=String.fromCharCode( getShortFromStream( unicode, pointer ) );
      }
      return string;
  };
  function longToString( longInteger ) {
      var string;
      string = String.fromCharCode( longInteger >>> 24 );
      string += String.fromCharCode( longInteger << 8 >>> 24 );
      string += String.fromCharCode( longInteger << 16 >>> 24 );
      string += String.fromCharCode( longInteger << 24 >>> 24 );
      return string;
  };
  function bytesToUnicode( bytes ) {
      var unicode = "", char_code, charIndex;
      for( charIndex  = 0; charIndex < bytes.length; charIndex ++ ) {
          char_code = bytes.charCodeAt( charIndex );
          unicode += String.fromCharCode(char_code >> 8 ) +  String.fromCharCode( char_code & 0xff );
      }
      return unicode;
  };
  
  function setGradientAdjustmentAngle( angle ) {
      var adjustmentDesc = getProperty( charIDToTypeID("Lyr "), charIDToTypeID( 'Adjs' ) ).getObjectValue(0);
      var newAdjustmentDesc = duplicateDescriptor( adjustmentDesc );
      newAdjustmentDesc.putUnitDouble( charIDToTypeID('Angl'), charIDToTypeID('#Ang'), angle );
  
      var desc = new ActionDescriptor();
          var ref = new ActionReference();
          ref.putEnumerated( stringIDToTypeID('contentLayer'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
      desc.putReference( charIDToTypeID('null'), ref );
      desc.putObject( charIDToTypeID('T   '), stringIDToTypeID('gradientLayer'), newAdjustmentDesc);
      executeAction( charIDToTypeID('setd'), desc, DialogModes.NO );
  };
  var newAngle = 45;
  setGradientAdjustmentAngle( newAngle );
  

• Adjust the background color to match the specific shade

  Hello!

  I was instructed to clean a few images from a studio session. Either the background seamless was the wrong color, or was invaded by evil and its color must be adjusted slightly. I have isolated the backdrop as its own layer and simply adjust its color to match a specific shade (RGB, CMYK # s provided). There is a certain gradient due to the installation of lighting, so it will not be uniform everywhere, but it's OK.

  I do not see how to adjust hue, saturation, brightness in the options I tried (adaptation layer, replace color etc), which lead me to the eye there. I need to enter the RGB or CMYK #s and apply to adjust the color of the background (layer) together. Cannot know what I'm missing here.

  Appreciate any help! Thank you!

  When you sample the color you want to match, write these numbers.

  Now, on the background you want to adjust in order to match the colors that you noted, raising some adjustment tool to use, I use the hue and Saturation, for example.

  The color eyedropper sampler allows you to place a sampler on the background area that you need to change the color that you want to match.

  Now, you'll notice there are distributed the values in the range of information if you look at the values of the sampler. In this case #1 (see screenshot)
  The value on the left is the original sample value, the number on the right represents the new value when you move the sliders in the parameters of adjustment layers. Keep these move around until you get the number to reach the numbers you noted at the beginning. Be warned, the numbers on the sliders are not relevant to a certain extent. You make adjustments while watching the Info palette.
  

  See above, I've adjusted the main value and saturation, and you can see the RGB values on the #1 sampler is different. When those numbers coincide with everything what I'm trying to correspond with as a value of the sample, you should be good. Although my value is defined in RGB, I would recommend colors you sample and football game, as HSB values. It is easier, then by a channel with RGB match.

  Good luck!

• I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  does anyone have a solution to this?

  Hello

  The following steps can help (try again after each):

  • On your iPhone, in the application of the watch, go to: Watch My > general > use > software update - remove any file update, if one is displayed.
  • Delete all profiles beta (on your iPhone and/or the watch), then restart both devices (this applies only if you have already participated in a program of Apple Beta software).
  • Restart your iPhone and your watch:
    • Close open applications on your iPhone:
      • Double-click the Home button, and then drag upward on each Preview app to close.
    • Close the two devices together, and then restart your iPhone first.
      • Restart your iPhone, iPad or iPod touch - Apple Support
      • Restart your Apple Watch - Apple Support

• The text of the e-mail under the column of the object does not match the selection

  When I get to my Inbox and select an e-mail to open the middle box and the text box below do not match the selection in the object column. This has occurred recently and only on my laptop. My office works fine. The central area and the text matching, this email has been deleted but the text won't just change and go. I'm going on a trip tomorrow, and if I can't fix this, I won't be able to open emails with possible solutions. I'll see answers but can't open them.

  right click on the folder, select Properties, and then on the button repair.

• The color in printed images is not match the colors on the screen

  I've recently updated to an iMac, retina 5K and the colors in the printed images do not match the colors of the image on the screen. I use CS6 and the screenshot below shows that, in the window of the print settings CS6 image does not match the image of origin either, the original image on the left.  I've updated all print drivers, and the images are also too green/faded when I print them, or download them on Animoto or Mpixpro.  We tried a Spyder calibration system, and that did not help.  For now, I have to make a folder separate with "twisted" images that have increased the saturation and Communists to give them a normal appearance.  Does anyone else have this problem?

  

  Unless you have a current color profile for the display you are using and you have calibrated the printer for the specific of ink and paper that you are using, its not surprising there are differences. Without a color managed workflow screen and software have no information on what the printer can produce.

  The range Spyder products are not up to the task.

  The normal options for managing your color workflow are:

  1. using the X-Rite i1 photo system,

  2. purchase of a custom profile for your type of printer, paper and ink, done by a specialist in color management

  3 - Send your files to a professional lab that is capable of producing quality work.

• I accidentally used an old key sync on my 3rd computer and need to change to match the other 2 computers. How can I remove the incorrect sync key and replace?

  I trying me to computer sync a 3rd and when I looked at what I thought was the key to current synchronization and he came, I realized that the key I used was old and now does not match the other 2 computers. How can I delete the wrong computer key 3rd to enter the correct key?

  Hello, on your computer 3 go in Firefox > options > synchronization and click on 'unlink this device' then you can configure it again with the correct credentials.

• Parameters specified by step do not match the settings of the sequence

  I just upgraded from Teststand 4.1.1 to 4.2 and have encountered this

  problem during the review of the existing sequence files.

  When I open a file of sequence, select any stage of type sequence call, which calls another sous-séquence

  in a different sequence file, I learned that the parameters used do not correspond to those required.

  To be more precise, in the settings area of the stage, a red exclamation symbol appears at the side of the

  subsequence called step, and the ToolTip is displayed when the mouse pointer is

  hovered over the exclamation point States:

  "Parameters specified by the step do not match the settings of the sequence."

  The ToolTip goes on to explain how to solve this problem by clicking on the exclamation symbol.

  I find also that by deselecting the "Prototype using sequence" tab in step Settings\Module

  solves the problem.

  When the sequence is executed, no problems occur with execution, the test performs correctly.

  Is it possible to clear this error for each sequence call not in one operation?

  Thank you

  Gary.

  My apologies to attach a file of sequence buggy. I forgot to pass a parameter to the LoadPrototype method to preserve existing settings. I have attached a corrected version of the sequence file. I changed to update SequenceCall not only because of potential problems, reloading the DLL prototypes.

  I would try to explain why you see cela TestStand 4.2. The additional results feature, we added to TestStand 4.1 needs to know what parameters are entered, output and input/output (i.e. what settings is pass by reference). Before TestStand 4.1, step of calling sequence does not store this information but rather dynamically got it and it appears in the column how go. Now that we store the past by reference with the step option, you can have an inconsistency between the option stored in step and the current setting of the sequence called. This inconsistency affects only additional results and not execution. TestStand 4.1, the sequence editor to not warn you on these inconsistencies. We have added the TestStand 4.2 warning so that you will have the correct information for additional results.

  When TestStand 4.1 or 4.2 load a file of sequence from a pre-version 4.1 version, TestStand sets cervical optionally reference true for all parameters in the call sequence steps. This is why you see the warning for any sequence calling step created TestStand 3.5 If no parameters are not passing by reference. You can also see the problem if you change the option collar called a reference parameter in the sequence.

• Harger W530 AC does not match the Jack of the portable power

  I just got my new W530, but I can't load it. Looks like 170W AC/DC charger is just, but somehow the physical connector does not match the power supply of the portable computer. Charger AC/DC 170W is not circular but with two small rectangles, however W530 is completely circular. Someone had the same problem? I try to return W530 that looks like it was made of bad sense but takes to always come back. any recommendations? Technical service told me since it is within 21 days after the delivery, I better return.

  Technical service is great

  But after the sale to get back really really bad!

  It's quad-core, it requires 170W "brick" AC load, which has one taken not circular.

• [AllObjects] cluster does not match the cluster command?

  I have a control group of string for which I'm looking to get the labels for each of the individual channels.  My goal, as part of a larger project, is to pass differently labelled strings but same size cluster in this sub - VI and then write the labels string & text in a file.  However, the index of the references in the [property] AllObjects coincide with the command I gave the cluster stands... why?  If this isn't the case, of the order of the cluster objects, how is the order of [] AllObjects calculated?

  Is there maybe a property that I am on that can match the elements of allObjects, go back to them within the cluster?

  Or any other suggestions to get the labels of controls within the cluster while maintaining the same command as the cluster?

  You use the Controls property of [] of the class Cluster for the commands in the order in which cluster. I don't know what order the AllObjs [] property returns... maybe the order in which they were dropped at the outset? The reason why there are two properties is because [AllObjs] would include also all the decorations inside the cluster.

• the channel guide does not match the actual string

  the channel guide does not match the actual string that is to say PBS should be Channel 13 but is listed as channel 2 on the guide

  Hello James,.

  Welcome to the community of Sony.

  What is the model # of the TV?

  You can locate the model # of the TV from this link.

  You can try the steps mentioned on the underside of the base article of knowledge:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C408137

  Please mark it as "acceptable Solution" If you find this information useful.

  Kind regards

  Colby

• "the settings saved on this network do not match the network requirement" is the message that I get when I try to connect to my wifi

  I changed my router to another wireless.  Since then, my laptop cannot connect to my wifi.  When I search my wireless network, it is exed out in red.  and the message "the settings saved on this network do not match the network requirement"... Please help

  [moved from comments]

  Hey Mike,

  -What version of Windows is installed on the computer?

  This problem usually occurs with wireless networks. I suggest you try the suggestions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/the-settings-saved-on-this-computer-does-not-match/a82432f2-9312-480a-b2ea-720033c73387

  Let us know if this can help, or if you have any questions.

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Certificate error "the name on the security certificate is invalid or does not match the site name.

  When my computer after starting the antivirus and Skype loaded,.

  I recently started to get warning of security box appear. The attachments show you what I see.

  I am told "the name on the security certificate is invalid or does not match the name of the site"

  Whether I click Yes to "do you want to proceed", nothing happens.

  How to make this security alert disappear from the start-up procedure?

  Thanks for your advice

  Marty783

  

  Thank you PML

  Problem is now solved.
  Was a corrupted version of IE6, which, when updated to IE8, fixed the problem.

• I tried to run the IE8 downloaded from Microsoft and I got this message: "the version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:

  "The version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I'd appreciate any help that I couldn't solve this problem!

  Thank you!

  E-mail address is removed from the privacy *.

  Original title: error KB2618444setup

  I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.

  You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
  I'm going to guess you really want that for IE8.
  That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe