To obtain an 'automatic' peripheral register without PSN?

Similar Questions

• I use ff 24.0 and how automatically remember passwords without busting the icon 'Remember password' outside?

  I want firefox automatically remember passwords without hitting the icon "Save password". Anyone know how?

  It is not possible. It would be a security risk, image you are on another computer (public). It would be too easy to collect passwords, so you must take this extra step to store a new password.

  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

• I can't change my ip and dns address. I can't change, but on reboot it was greyed out and (obtain addresses automatically) how can I fix?

  I can't change my ip and dns address. I can't change, but on reboot it was greyed out and (obtain addresses automatically) how can I fix?

  This happened after the execution of virus / malware scans and found some. The supposedly fixed it, but now I can't access the internet. It still works on my local network.

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps from the link below

  http://support.Microsoft.com/kb/299357

• TCP/IPv4 obtain DNS automatically

  Hi all

  I have my router configured to use dns to opendns servers, and everything works fine except for my desktop under Vista SP3 PC.

  I have my router set up because of the IP based on MAC addresses, so I have the TCP/IPv4 set to obtain an IP and DNS address automatically.

  My problem is the PC of Office Watch reset itself and registering an address in the DNS server box. How do I delete these addresses and force it to Auto adjust.

  I don't really want to put in the openDNS servers, in case I decide to go back to my ISP servers. I prefer to keep auto and make the changes on the router.

  It becomes very frustrating to have to keep resetting.

  Go to start / Control Panel / Internet Options / connections / select the connection and click settings.  Click on properties and go to work in network and select TCP/IPv4.  Under TCP/IPv4, select properties and make sure that the first page says get an address of DNS server automatically.  Click Advanced and then click DNS.  Make sure that the only two boxes checked are Append primary and Suffixes connection specific DNS and add relatives of the main DNS - nothing else suffix suffixes.  Click OK and save this.  This should solve the problem.  But I suspect that you already did (probably several times) so let's move on.

  The only other option that I can think of is to reset the TCP/IP stack that can get rid of the incorrect addresses and run and fresh with the correct settings.  Here is the procedure:http://geekswithblogs.net/mattcampbell/archive/2007/09/30/Resetting-your-whole-IP-stack-in-Vista.aspx.  I don't know if this will help, but if you are having problems with TCP/IP, it is one way that many people use to solve.  Then you will need to reconfigure the TCP/IP settings and then you can see if that does the trick.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to automatically mount network without password readers

  Hello

  First of all, I use MacOS Sierra, but I don't think that there is a forum for this yet.

  I have a mini mac which auto powers walk every day and basically sits there backing up files from multiple sources.

  One thing I need to do is to automatically mount a few files on my NAS.

  So far I have tried:

  • Use the Finder to use go-> connect to server, entering the mount point (tried with and without identification information in the path), ensuring that, when the dialog box that appears, I select the option to save the credentials in my keychain, then take this shortcut on the desktop and dragging it in my list of connection
  • With the help of Automator
  • Using AppleScript
  • Ensuring that all applications can use these passwords in the keychain without asking confirmation

  All these work the drive is mounted, but regardless of whether the name of user and password in the connection string or not and ensure that registration is set to password in the keychain, each time, I get a pop up asking for the name of user and password. It's always busy and all I have to do is click on the connect button, but it does not help on an unattended computer restarts every day.

  I was unable to get Apple script, click on the button to connect.

  Someone else you have this problem, or even better a solution?

  Thank you

  James

  You found a solution to this? If Yes, do not hesitate to share

• a kind of automatic update suddenly without warning started to close all the documents I was working on, rebooted and lost all the changes I had made in the past three hours

  I've worked hard for three hours in the middle of the night, made extremely dfficult work on several Word documents and Excel spreadsheets. at the same time - the kind of work that you can do if you're sure not not to be interrupted. All of a sudden a few (probably Windows) update began to close the files one by one, "don't turn off your computer" was the message.
  I waited. It restarts, but then I realized all of work my three hours had disappeared. The files are still there, but in their unchanged form. How is it you lose nothing if your battery runs out and you can restore the files, that you deliberately deleted, and there is a permanent record of each tiny websearch? However, Windows can come in the night and boldly to destroy three hours of irreplaceable forced labor without warning! I won't ever be able to replace it.

  Set the automatic update process so that you can control if the updates to download and install.

  And, as a general rule, always save files regularly while you work.

  HOW to: Configure and use automatic updates in Windows XP
  http://support.Microsoft.com/kb/306525

  How to configure automatic updates by using Group Policy or of registry settings
  http://support.Microsoft.com/kb/328010

  for Vista: http://windows.microsoft.com/en-us/windows-vista/Change-how-Windows-installs-or-notifies-you-about-updates

  for Windows 7: http://windows.microsoft.com/en-AU/windows7/Change-how-Windows-installs-or-notifies-you-about-updates

  Take control, adjust your settings in THE and save your work as you go along.

  TaurArian [MVP] 2005-2010 - Update Services

• Why Thunderbird does not automatically save attachments without me opening an email?

  I can get 200 emails in a single day, with attachments I have to deal with. At present, the only option for me, in Thunderbird, is to display each email and click on the attachment. If you have already tried to do 200 times in a few minutes, you will understand that it is not a good solution. Eudora, I was using before using Thunderbird, but that is old and has problems to run correctly with the latest versions of Windows automatically saves all attachments in a specific directory.

  Can we please have as an option selected by the user, automatic, saving all attachments in a directory specified by the user? Those who do not need should not use it; those of us who need it will be saved a lot of time and effort.

  You must specify the folder in the filter creation window, as in the picture (click the folder "select a file" icon). First of all, make sure that Save or detach attachments are enabled in the Options of FiltaQuilla.

• Select all the messages and support those want to register without selecting him coming all out

  Another email I was able to select all and then click ones I wanted there without taking off select them highlighted. If I do this with Mozilla, we highlight the rest. I have over 3,000 and the need to delete without having to move the others I want to left. How can I do this?

  CTRL + A = select ALL.
  Shift + click = Select all between clicks.
  CTRL preserves the State and allows clicking on selected to deselect and vice versa.

• Messages automatically marked read without opening them

  Hello

  I have the following problem:
  I changed my computers and on the new, I installed Thunderbird (latest version - 38.0.1) and put my email (for IMAP) account.
  Before I was using Outlook 2013 and my configurations were on POP3.

  Now when I get a message, it automatically becomes read withou even open it. I don't have any active filters.
  Is there a solution for this problem that I've been browsing the web and I do not found any related and good information on this problem.

  Kind regards
  Alexander

  you have a phone your radio? try turning off for awhile and see if the mail starts appearing as unread. Some for tablets, other computers etc. Almost always mail downloading read because it is so marked by another device.

• Inscription: How could it be pretty darn difficult. The site says: "your email address could not be validated; "Make sure your email is correct and click on register below. I have never validated. S, I register without the possibility to validate. What th

  I tried to register with support, but:
  "Your email address could not be validated; Make sure your email is correct and click on register below. »
  Action: I did.
  Answer: The same. How the H box you confirm if this was not possible.

  This has happened

  Don't know how many times

  is now

  Sign up here and you should be sent a link to the email you provided. If you have not provided an email address valid or an email that has not been used to create a.

• Map of peripheral register

  HI -.

  I am interested in the card register of the device for the DAQ NI PCIe-6353 map (and the latest X-series cards).

  Where can I find the documentation?

  Thank you.

  You already have an answer to this: http://forums.ni.com/t5/Multifunction-DAQ/Linux-Drivers-for-PCI-PCIe-USB/m-p/2829370

  Please post questions related to the ddk Board since it is not at all related to LabVIEW.

• automate to sequence without transitions?

  I use still images in a bin and I change the order of them and then use automate to sequence that he keeps adding transitions between the images, and maybe I'm missing the option to turn this off, although I'm not. Working in cs6, thanks in advance.

  

• How to download local files automatically to AIR without Popup window

  my AIR application is a desktop application, maybe shouldn't have too ask safe.

  now I need let download will automatically popup a window. I know FileReference class described it is impossible to set a default folder, but in any case, I think that there must be a way could solve this problem, as every 60 seconds please download a pic whithout click and go to the place where. This happened on Yes internet app, but are not true is happened on a desktop application?

  If even he can't really achieve such a goal, is it possible as like using FileStream to write local data of bytes to a file or another?  I'm just waiting for it can been used these means to write in the photo or flv files

  wait for the answers or clues

  Hello

  Air runtime based on native applications are already * in * user's security box - once there are deployed in some way - for example by inernet downloads, then installed. Certain restrictions that apply to flash.filesystem.FileReference shall not apply to the class that extends: flash.filesystem.File - because it is performed in the office - no browser web/sandbox sandbox. For example, action of loading/backup/browser, etc. - is not requiring a user interaction to start - you would also feature in flash.filesystem.File that lets you do not ask for any location where the content is saved - but that build paths during execution by using methods and properties of the File class.

  Your assumption on the download routine is simply OK, in the Air:

  -get bytes in application

  -create the file object reference

  -Open FileStream

  -write the file stream.

  For example, by exact example see this excerpt from the Adobe homepage:
  http://www.Adobe.com/devnet/air/Flex/articles/exploring_file_capabilities.html#b

  (file/FileStream details are in docs),

  HTH,

  Kind regards

  Peter

• Problem in obtaining the root XML element. (without prefix)

  Hi all
  
  my xml is as below.
  
  < ns1:abcd >
  < ns2: a > 1 < / ns2: a >
  < ns2:b > 2 < / ns2:b >
  < / ns1:abcd >
  
  If I try to retrieve the value of the root of the xml document.
  
  Myroot node = doc.getDocumentElement ();
  
  String result = myroot.getNodeName ();
  
  My output is ns1:abcd... I want only 'abcd '...
  
  Also if I try to print myroot.getPrefix, myroot.getNamespaceURI... all these values are null.
  
  My xml will not always have the same namespaces... starting from the xml inbound I must first check for namespaces... Please give me an idea.
  
  I think so.. I need an evaluation space names to...
  
  Please help me in this regard.
  
  Thank you
  Sabarisri. N

  Hi Sabarisri,

  Please try the following code:

  import java.io.StringReader;
  import javax.xml.parsers.DocumentBuilder;
  import javax.xml.parsers.DocumentBuilderFactory;
  import org.w3c.dom.Document;
  import org.w3c.dom.Element;
  import org.xml.sax.InputSource;
  
  public class Runner2 {
      public static void main(String[] args) {
          String xmlString =
              "" +
              "  1" +
              "  2" +
              "";
  
          try {
              InputSource is = new InputSource(new StringReader(xmlString));
              DocumentBuilder docBuilder =
                  DocumentBuilderFactory.newInstance().newDocumentBuilder();
              Document document = docBuilder.parse(is);
              Element element = document.getDocumentElement();
              System.out.println(element.getLocalName());
          } catch (Exception e) {
              e.printStackTrace();
          }
      }
  }
  

  Kind regards
  Pino

• After deleting saved password and the connection to outlook he autologing got me in without asking for password, how do I stop this?

  I've removed the password registered and logged, after going to outlook.com it comes automatically me relogs without asking for a user name or password.

  Hello qqquestion, websites usually set cookies to store information that your browser is currently connected, so you have to make them disappear too: delete cookies to remove the information from Web sites is stored on your computer