to restore the computer to factory

Similar Questions

• How to restore the computer to factory settings?

  I want to restore my computer back factory settings im tp do not know how to do that please inform me on what I do you solved the problem

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• bought Vista Ultimate and had to restore the computer to factory

  I need to be able to load ultimate on the same machine but have no software disc.

  * original title - I bought Vista Ultimate and had to reset the computer to factory vista and I did via down load. Is it possible to recover the Ultimate. I bought three different times, and I have my license info. *

  Hello
   
   
  I would ask you to contact the Microsoft customer service to get the installation disk. After installation, you can use the same license key that you purchased to activate Windows Vista Ultimate Edition. Or you can also contact the website from which you downloaded the Windows vista ultimate.
  
  See the article below for more information.
  How and when to contact Microsoft and support Customer Service
  http://support.Microsoft.com/kb/295539
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Restore the computer to factory settings

  Hello. How to restore my Vaio (Model PCG - 71318L) computer to the factory settings. I don't want to do a system restore to a point in time. I want to restore it to factory settings.

  To reinstall windows using the advanced recovery it says I need a 'windows install disc", but the computer did not come with one. How to create a "windows install disc." How this disc is distinguished by the "system repair disc.

  If I create a "system repair disc" I'll be able to use it as a 'Windows install disc"when I reinstall windows.

  Is reinstall windows identical to restore to factory settings? If this is not the case, how it restore to factory settings?

  My OS is Windows 7 Home Premium

  Thank you and best regards

  Hello
  Welcome to the Forums of Discussion of the user.
  PCG - 71318 is a chassis number for all VPC-EB-series laptops
  to find your number of exact model please consult this guide here: http://esupport.sony.com/US/p/support-i... 4 #notebook

  your laptop EB series has a hidden partition, to access with the computer turned off simply press the [help] button, it should turn on the computer and start the backup partition.

  If it does not turn on the computer and the key to tap the [F10] a few times to the VAIO logo
  a screen indicating "Edit Boot Options"
  Just press enter and launch the tools

  Once the load of tools choose "C Drive Recovery" and all will be wiped clean back to the original factory image. You can even use data backup to backup all your files before you begin the Format.

  Once the device is returned to the original image once you're at the level of the windows desktop, press [help] to open VAIO Care and create a set of recovery software. all you need are 2 blank DVDs

• Unable to get Yahoo as homepage favorite in the Windows XP-based computer after you restore the computer to factory settings.

  Original title: setting up old user account.

  need help please, I use wndows xp service pack 3. This pc is shared with my wife as an account administrator. I come back from pc to the factory settings and all is ok for my account, send everything etc, but on his account, I am unable to get yahoo bt homepage favorite, I am able to do, it's dell page. any help would be appreciated.

  Thank you very much

  Pete

  Hi Pete,.

  1. you receive an error message when you try to change the homepage of Yahoo?

  2. what browser do you use?

  If you use Internet Explorer 7, you can follow this link & check if the problem persists.

  You can't change the home page in Internet Explorer 7

  
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows.

  Hope the helps of information.
  Please post back and we do know.

• RESTORE THE COMPUTER TO FACTORY SETTINGS EMACHINE W3115

  I WOULD LIKE TO START ALL THE COMPUTER JUST AS HE CAME IN OFF THE SHELF

  You don't have a Microsoft Windows XP problem - you have a problem with eMachines.

  Looking at the World Wide Web of eMachines, here's what they say you need to do:

  http://eMachines-us.custhelp.com/app/answers/detail/A_ID/2631

  They have a lot of technical support options, including a chat with a technical support representative.

• The intention to restore the computer to factory settings. How can I get Win10 again?

  I have an emachine at less than ten years now. Originally it had installed Win7 on it and last year I got the free update of Win10. No problem downloading or installation, have no problem with it, but this poor old clunky machine is to his last breath. I want to do a "restore to factory settings. I know it will destroy everything, and I guess he'll reinstall Win7, after which I would download and re - install Win10 just like I did before.

  Can I do this?

  Should I have my registration key of Win10?

  Where would he get this information?

  Win10 is still available as a free download/install as if it were last year?

  I don't want to restore on Win7 to see that now I have to buy the Win10 I'm currently using for free, I want to know ahead what to expect and what will be expected of me until I push the button.

  Yes, I know, I need a new computer, but it is not the budget for it right now. It's why I can't really afford to buy Win10 if I don't have one.

  Thank you

  JaeMmb

  Yes, you can.

  Format your system and install Windows 7 and turn it on.

  After coming to start windows update and when your windows 7 updated, it will automatically give you 10 free update Windows.

  But the upgrade of your system before July 29, 2016 because after that, you will only get the free update.

• How to recover lost data after you restore the computer to factory settings

  Original title:

  I need help that I was going to check my computer for problem and I remove my itunes my play list my cd of my computer and my pic back to its original factory condition.

  here can you please help me back all my music my cd to my itunes playlis my pic can I get my file back as if was you please help me... ge everything back... I don't know was made for I find that my lap tat is was remove all my daughter help please...

  Hello

   
  Microsoft does not all applications that can retrieve data. I suggest to browse the Internet using your favorite search engine and look for 3 third party applications that can retrieve data.
   
  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• My Vista computer is slow and also I can't restore my computer to factory settings.

  Original title: a new manufactor

  My computer runs very slowly and ive lost the disc I have an everex computer and it runs vista im trying to get back to manufactor. Ive tried the basic backup and restore but it allow me to choose a restore point when I brought. Please help someone

  Hello
  
  1. What is the brand and model of the computer?
  2 How long have you been faced with this problem?
  
   
  I suggest you try the step provided for in sub articles to solve the problem of vista performance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
  Measures to restore the computer to factory settings depends on the manufacturer of the computer. Then I suggest you contact the manufacturer of the system or to check in the manual of the computer or we say the brand and model of the computer so that we can help you.
  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore 

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  Hello

  What is the brand and model of the computer?

  The best method is to contact the computer manufacturer for help on how to set the computer to its factory settings.

  Hope this information helps.

• I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

  I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I had to restore my computer to factory settings and now I can't get on the internet

  I had to restore my computer to factory settings and now I can't go on the internet. I have Windows 7

  Hello

  When you perform a restore, you may need to reinstall the network drivers, etc..

  As you can not access the internet on the recovery computer, use the computer that you are on to get here to do this.

  Go to the website to make your computer > Driver and Software Support Section > find your computer model number > then your operating system > locate drivers Windows 7 > download and install the desktop > copy to flash drive > transfer onto the repaired computer.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  You can download all the drivers this way, or once you have network and/or pilots Wi - Fi installed get the rest downloaded directly to the repaired machine.

  See you soon.

• I had to restore my computer to factory settings, which means I lost PS Elements 10 I bought a few years ago. I have a serial number, but when I tried to install it I got the message "the game archive file of 10 items is missing.» Everything you need

  I had to restore my computer to factory settings, which means I lost PS Elements 10 I bought a few years ago. I have a serial number, but when I tried to install it I got the message "the game archive file of 10 items is missing.» "You must all parties." Any ideas.

  who says good enough.

  you need BOTH the exe and 7z files.  put them both in the same directory and double-click on the exe file.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Z220 CMT Workstation: restore the system to factory settings.

  Model: Hp Z220 CMT Workstation
  OS: Windows 7 Professional
  
  I'm trying to restore my computer to factory settings. I pressed ESC several times at the start to the top of the computer. Select the system restore, but the computer just hoot to Windows form. I can not connect to windows, because as some error loading windows.
  
  Is there another way for me to restore the system to factory with a clean Windows 7?

  > is there a way for me to get the recovery disk?

  Two ways:

  1. in Windows system work, running the same version (32-bit? 64-bit?), you can burn a disc of "recovery."

  2. find a friend with a 'detail' in the Windows 7 operating system DVD (remember this is the same 32-bit or 64-bit, your system) and borrow the DVD of him/her, or get him or her to burn a copy of it.

• How to return the computer to factory conditions

  I'm really having a very hard time with this.  I tried to restore my computer to factory to get rid of windows 8 etc.  I've erased everything, or so I thought.  Windows 8 is still on it.  I have discs I need etc to back to factory.  But I can't figure out how to get the discs to run.  I went to my control panel for the recovery and said everything I looked for me to choose methods of recovery in advance.  Although in my control panel that the option is not there.  So I'm still stuck on what to do.  I want to go back to the factory and start but nothing I try does not work.  I worked on it for 2 weeks and I am ready to throw this whole computer.

  Hello

  This should help you.

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  See you soon.