To set up my drive Web told me to "make sure that Ports 2077 and 2078 are not protected by a firewall... How can I find this information and if a firewall, how do I change or correct 2077 and 2078.
I'm trying to implement a web disk with Hostgator for my blogs and the problem seems to be on my end, not theirs. If I have a firewall port problem which prevents me from using my drive so what other options can I?. Also what are the Ports 2077 and 2078 on my firewall. How can I fix the problem? Should I switch the disk and just use my desktop computer? I wanted to keep the Hostgator on the disk. Also, I have the same problem if I jump the disc. My 'add a network' don't like what I'm doing!
Your message isn't clear when you refer to "floppy disk".
In general, a firewall is designed to avoid that other computers access to your computer - unless you want that to happen. You can add an 'exception' to the firewall that allows the software installed on your computer to communicate through the firewall, or you can open 'holes' (aka port) in the firewall that remain open regardless of whether an application on your computer is actively using them. The latter is obviously a bit more risky.
How to configure these exceptions depends on which firewall you use. If you have Windows XP service pack 3 and you are using Windows Firewall, see http://windows.microsoft.com/en-US/windows-vista/Open-a-port-in-Windows-Firewall (well that article is on Vista, it applies as well to the firewall of Windows XP sp3, except instead of step 2, just click the 'Exceptions' tab - and don't forget to uncheck the box in the "General" tab that says "don't allow exceptions").
Tags: Windows
Similar Questions
-
Can not connect to my tablet PC. When the powers of the Tablet, it ask for password and user name of ny, but when I get home it gives message to make sure that the name and the password are correct. I was on the shelf and I tried to change the workgroup and domain, it askes restart once I did c Hanger, but now I can not open yet. The PC is running XP and it is old, 15 years! Help!
Hi ERASMOTERAN,
Please see the below article mentioned on the Microsoft Policy on lost or forgotten the password.
Microsoft's strategy concerning lost or forgotten passwords
See also:
Keep secure passwords - Microsoft strategy on move the passwords
-
I am an active member and I am trying to install Abobe Acrobat Pro XI and he asks my serial number. Where can I find this information?
Hey jamesl12995614,
Could you please let me know if you use subscription or purchased Acrobat as a one-time purchase.
If it is a subscription, then all you need is to connect on adobe.com using your credentials to Adobe and download the software.
Otherwise, you could check out the link to doc KB to find your serial number below:
Quickly find your serial number
It will be useful.
Kind regards
Ana Maria
-
Of course, this looks like the stupidest question of the world, but I'm curious:
What is the current Version/version number of Adobe Dreamweaver CC?
I have communicated to 2015.0, Build 7714.
I don't know if there are updates because my COMPUTER has decided they know better than anyone else and the only people can make the updates of the software.
So I don't know how far behind, I'm in the updates.
I've looked everywhere on the Adobe site, but this information is apparently unavailable for the eyes of the public--it will not display.
Help is greatly appreciated.
Try using Dreamweaver | Release notes
Dreamweaver CC 2015.1 is underway.
-
Some tips to make sure that the checkboxes and hyperlinks work ePub?
Can someone help and give advice on how to access the check buttons and hyperlinks to work for export to ePub? I must be missing something, but no matter what I have will not work when exported to ePub from InDesign CC (current version). I have to do this work for a book that is available for sale by the weekend, so any help is welcome!
Fixed or recomposable EPUB?
EPUB fixed layout in the current version (InDesign CC 2014) cannot represent text links. There is a limitation to the next version.
There is no support for PDF to EPUB (box, buttons) forms.
-
Original title: KEY of MICROSOFT
THE STICKER ON THE BOTTOM OF MY TOWER H HAS RUBBED OFF THE KEY NUMBER OF MICROSOFT WHERE I CAN FIND
This freeware will reveal the information you're looking for:
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages - Windows cannot find C:\Windows\system32\rstui.exe «»
- Recent changes made to your computer: I accidentally change the main drive d LABEL: volume 1 label D: (C :) AND IT does not FIND C:\Windows\system32\rstui.exe. How can I find this path?
- What you have already tried to fix a volume control simple back - I tried things like this before as to cause major problems. I'll do it right the first time.
Read this tutorial carefully. Hpoefully it resolve issue you. I have no knowledge on this topic. Only offer you a tutorial of a VERY worthy site.
How to add, change, or remove a drive letter in Vistahttp://www.Vistax64.com/tutorials/114767-drive-letter-add-change-remove.html
t-4-2
PS Sorry for the huge impression. A small bug in copy/paste.
-
Original title: rise of nations
on the rise of nations, I get this error code. How to fix it. DISK ERROR WRITING C:\PROGRAM FILES\MICROSOFT GAMES\RISE OF NATIONS\ART\OPENING. WMV. MAKE SURE THAT YOUR DISK IS NOT FULL AND THAT THE FILE IS NOT IN USE.
Hello
1. do you get this error during installation, downloading or playing the game?2. What is the amount of free space on the hard drive?
Method 1: clean boot the computer and check if the problem occurs.
To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Note: Follow step 7 to reset the computer to start as usual after the boot process.Method 2: uninstall and then reinstall the game and see if the problem still occurs.
Hope this information helps -
What is a 'live' bookmark, and how can I be sure that none of my favorites are online?
I'm trying to reduce the automatic Firefox on the voluminous Internet communication (see previous thread at https://support.mozilla.org/en-US/questions/968773#question-reply for background). As far as I know, I have not subscribed to any news feeds, or click "subscribe to this page."
One thing I don't understand is how to tell if one of my favorites is 'live', or if none of the sites I visit normally automatically refresh their pages open on my browser. I can't find any on the Mozilla Support entries that explain even is as a "live bookmark
Can someone please:
(1) define a "live bookmark."
(2) say how to identify one in my bookmarks sidebar (or).
(3) say how to change any 'live bookmark' in and a regular bookmark (dead), and
(4) tell me how to prevent pages Web open automatically updated on my browser? (Internet Explorer used to have options for when you have to refresh a page, including "never.")
I am running Firefox under Windows XP SP3 24.0. Thanks in advance! -JCW2
See the article How to stop Firefox to make automatic connections .
Live bookmarks, are not enabled by default, unless you enable them (the item will still show).
For more information, see: https://support.mozilla.org/en-US/kb/Live%20Bookmarks
-
MacBook Air, OSX 10.10.3, 128 GB; 2 TB Time Capsule ME177LL/A.
Final objective: use Time Capsule as a Time Machine for my MacBook Air and as a storage solution for large files that I don't want permanently on my MacBook Air.
So far, I've implemented the TC and set up Time Machine on the TC. I was able to create 2 partitions on the TC using disk utility then that TM was a backup and the disk was recognizable in disk utility.
Under Finder/shared, I see the TimeCapsule 'airport', and when I click on it it is a file called "Data". I was expecting to see my two partitions here. Under 'Features' is a ' Zissou31 MacBook Air (3)"sparsebundle file and I can also create folders here and drag and drop files on the TC here. I can see the partitions in disk utility, but how do I see/use the partitions I created in the Finder?
I fear that this may not be set up correctly and I'm either losing on an entire partition I created or these files dragged/dropped may be at risk of overwriting of TimeMachine. How can I make sure that the file analysis is on the appropriate partition?
I disabled TimeMachine and go back to see if I could 'point' to one of the partitions, but the "Data" folder is the only thing that TimeMachine seen. How do I point time Machine for one of the partitions?
Thank you!
In addition, in disk utility, I can see one of the partitions TC is related to the time Machine, indicated by the icon Time Machine green bottom left, but two partitions seem to fall under "Zissou31 of the MacBook Air (3) .sparsebundle.
-
When I try to backup Quicken, I received the error: cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected. My last backup of Quicken was 16/07/2010. I don't know why I can't back up now. Is there a way to fix this?
Why not save to a folder on your hard drive and burn them to a CD - R from there? I can't tell from the little you wrote if the problem is with Quicken (not work or you have incorrectly backup location) or with your CD - RW drive. How about more details to work with? This will give you an idea of what to write:
The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?
http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
http://support.microsoft.com/default.aspx/kb/555375 - how to ask a QuestionMS - MVP - Elephant Boy computers - don't panic!
-
Im trying to connect to a server on Battlefield 3 as im log on a server I get a message saying: could not initialize the display adapter, please make sure that your video card is compatible and the driver so that it is installed. Usually, it is a result of the lack of specific driver of the seller then, how can I fix this problem so that I can play Battlefield 3 new...
Hi Anthany,
If you have a hardware device that does not properly with your computer, you probably need a driver updated. There are three ways to update a driver:
Use Windows Update. You will have to perhaps set Windows Update automatically download and install recommended updates.
Install the software from the manufacturer of the device. For example, if your device is equipped with a disk, this disk can contain software that installs a driver for the device.
Download and update the driver yourself. Use this method to install a driver that you download from the manufacturer's website. If Windows Update can't find a driver for your device and the device didn't come with software that installs a driver.
Step 1: Download and install the latest version of DirectX.
http://support.Microsoft.com/kb/179113
Step 2: Download and install the latest graphics driver and see if it works.
Update a hardware driver that is not working properly(Windows 7)
Good day!
Answer please if you face concerns.
-
Error - error message: an element on the page "News" at location 33 642 requires the pixelation, but is too large to rasterize. Resize it smaller and try again... I can't fix this or find that the line number. How can I find this line?
I don't know why it worked, but I changed the police and was able to download Web site. Thanks for your help!
-
Hello
I have a problem of Age of Empires 2 running on my new computer. Keeps displaying the following error message: "cannot initialize the graphics system. Make sure that your video card and driver are compatible with DirectDraw. "Someone at - it solutions to this? I have already visited many forums and trying different solutions; None of them helped.
Tried solutions: change the compatibility and as an administrator, switching to 16-bit color, turn off my graphics card, execution of the extension "nostartup" of the game, looking for old patches from Microsoft (which most are now unavailable due to the game being so old). I KNOW that others have been able to get this game to work on the Windows 7 operating system, but with a few other quirks and I KNOW my video card and driver are more than capable of handling this game. Any suggestions?
System Specs:
System manufacturer/model number Dell/Studio 540
Operating system windows 7 home premium 32 bit
6 GB of memory
Graphics card ATI Radeon HD 4350
Monitor (s) displays Reference Dell ST2410Thanks in advance,
EP
I had the above problem with AOEII:Age of the Kings. My brief spec is Windows 7 Ultimate edition (SP1) and a card nVidia 8600 GT. I did the following (make sure you reboot after each installation):
Make sure that you are running the latest patch of AOEII:AOK (2. 0 a):
http://www.Microsoft.com/download/en/details.aspx?ID=35
Download and install the latest version of DirectX:
http://www.Microsoft.com/download/en/details.aspx?ID=5264
Download and install the latest nVidia Driver suite. I left the autodetect my card software and reset all my default settings. I also installed the full software suite:
http://www.nvidia.com/download/index.aspx?lang=en-us
Finally, right click on the shortcut of AOE and click Properties. Click on the Compatibility tab and select the following:
-Run this program in compatibility mode - choose Windows XP Service Pack 2 (!) NOT 3!)
-Disable visual themes
-Disable the Composition of the Bureau
-Run this program as an administratorOne of the above options maybe work on its own, but that's what I had to do to make it work and I tested it after each step.
Good luck!
-
I can't get my Age of Empires 2: Age of Kings drive on my computer.
It gives me the error message: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.
What exactly is DirectDraw. and how can I make my video card and the driver compatible to it. I already tried to uninstall and reinstall the drive.
Help, please!
What kind of graphics card you have and you have the latest DirectX and video card drivers? If this isn't the case, update them.
Maybe you are looking for
-
Installed Apps not updated in the App Store
Updating macOS version 10.12 on MacBook Pro retina Sierra updates (end 2013) available in the App Store. When you try to update, receive the message "Apple Media Services terms and Conditions have changed. " ... To continue, you must read and agree t
-
WIndows 7, Firefox 42.0New version of firefox, constantly keeps popping up a message asking me to "Bring your bookmarks and passwords with you." I am currently working. It shows me once then stop. OFF to Chrome I guess
-
for Mozilla, Flash player must be installed manually and separately. Why not mozilla go out with a browser's built-in Flash player and the automatic update
-
Hi all I just bought an Officejet 8600 and I use it on Mac OS X 10.8.4. ePrint is a really great feature but... How to configure the printer to use ePrint feature recto / verso? Thank you.
-
Hello If the check box "I intend to set up this area for single sign - we with my local Active Directory." is checked when a new custom domain has been created in ad Azur is present then stop Azure AD Connect be able to password synchronization? I'm