Together to customize proof Condition

Similar Questions

• Happen after when it is true

  Hello

  I know my title is quite similar to another, but I almost read all the post about it, tried several methods suggested in another post, but I did not succeed to solve my problem, in every sense, the same problem occurs.

  I have a condition "on the fly in the region" who send "true / false".
  What I would like, is every time he gets into the box, so it goes true false (or vice versa), it adds + 1. (If that counts as + 1 when it goes outside the box, it is not a problem, I can divide by 2, and then round.)

  So, here is what I did:

  

  With this code, when the fly is on space, nothing happens ==> property

  When the fly together in space (the condition is true), it adds + 1, then again + 1, once again + 1 all the time fly's on the box then it goes to something like 10-100 while it should stay at 1. If it comes again, then 2.

  What I would like to, is that it brings only + 1 ONCE it is true, and I really don't understand what I'm doing wrong.

  Thank you very much.

  Sébastien.

  That's what I mean.  If you right-click on the tunnel, there is a menu to connect the tunnel to the other.  You must keep your status in all cases.  Then they need to be set to cable through.  If you link the tunnels, then when you create a new case of the vlue will be automatically connected through.

  

• Run a macro in Excel to an open workbook?

  Hi all

  I am relatively new to View Lab and Lab VIEW forums.  I searched the forums and the knowledge base with results which doesn't really answer my question.  I download each LV/Excel example and llb I find... dug through them and tried to familiarize myself with the LV/Excel relationship with marginal results.

  Basically, what I'm trying to do is to run an Excel macro in a workbook that is already open and run all of the examples I found... force you to open the Excel workbook, which is problematic if the workbook is already open.  I have a VI that you open my workbook and run the macro I specified, but when I try to remove the "open" part it blows upward.

  I pulled the "Excel Macro Example.VI" finder OR example, who once again does not work if the workbook is already open.  It seems to me that the main problem is that there is not another option another "Automation Open.VI" I do not have the reports of the Toolkit, so maybe it's the question... do not know since I do not know what it contains.

  I have attached one who opens my sheet and runs the macro (excel_run_macro.vi).  I would be very grateful if someone who understands the links between the LV and Excel take a look and possibly direct me in the general direction of the macro execution without trying to open Excel again.

  Thank you!

  Chad

  the problem is that you keep trying to open the workbook when it is already open. in the attached code, you will find that I am looking to see if the workbook is open. If it is then I put it is the active workbook and run the macro. If it isn't then I open and then run the macro.

  Try the code below and see if it works for you. You will hace to ensure that all references are closed and comparison feature works for you. I just hacked this together as a proof of concept for you.

• How configure you VPN on ACS 5.2?

  Hi all

  I'm working on obtaining the ACS to authenticate VPN users. I have a policy without wire/GANYMEDE in place and applied.

  Can someone help me with the game to the top of the authorization as well as the policy profile?

  Thank you

  Randy

  Hi Randy,

  Please follow the following:

  Network resources > peripheral network and AAA clients > Create

  1. enter a name

  2. Ip address

  3 GANYMEDE enable

  4. Enter the shared secret key

  5. submit

  Elements of strategy > authorization and permissions > Device Manager > Shell profile > access

  Access policy > Default Device Admin > authorization > customize

  1. move to IP address from to customize Selected Conditions

  2 ok

  Access policy > Default Device Admin > authorization > Create >

  1. name (name)

  2 State > enabled

  3. Select a Condition know ip address

  4. Enter the ip address of the NAS, used for the VPN endpoint.

  5 results > Shell profile > access

  6 OK

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• ACS 5.3 integration with RSA

  Hi people,

  I joined the ACS 5.3 to AD.

  Now, my next goal is to integrate with RSA ACS so that all my Cisco devices must use the username and password of the pub.

  The enable privilege level should come from the OTP Token RSA.

  Is it possible to do such a thing with ACS 5.3?

  If yes how can I do?

  Thank you

  Maury

  I think that may try to make a rule in politics of identity based on the attribute of Service in the dictionary GANYMEDE +.

  (this is not tested and based on my memory would need your checking)

  (1) create a condition custom attribute service GANYMEDE + dictionary

  Elements of strategy > Session Conditions > Custom

  Create: Dictionary: GANYMEDE +; Attribute: Service

  (2) use generally in identity politics Device Admin

  Access policies > access > default device Admin > identity

  SSelect a rule based

  Customize the condition function 1

  Create a rule for when the Service is to 'enable '. Select the source of identity as RSA in this case

• G62-b90EC

  Hello
  I am using HP G62-b90EC notebook and I have updated my graphics card problem.
  My graphics card is ATI Mobility Radeon HD 5470.
  If I try to download the lates catalyst 13.4 there say that the version of my graphics card is not supported.
  Now I have Catalyst 12.3.
  I use Windows 7 64-bit.
  Can someone help me please?

  Hey FMatt,

  I'm sorry that you run on this issue of update. In fact, it is not recommended to download updates other than the one that is listed on Your HP driver Page. HP and AMD work together to customize a driver that works best with other components and software of your specific model.

  Download a different version of the site Web of AMD directly will most likely cause problems like this where the brightness setting not save. It's a minor side effect, but there could be other problems, too, as it interacts with the HP framework (software specific to each model which facilitates effective communication between different pieces of hardware).

  The recommended version is AMD HD Graphics Driver version 8.771.1.0. If you do not have this version I suggest to uninstall the current version on your computer and the installation of 8.771.1.0.

  To do this:

  1. open Device Manager > graphics cards > AMD HD > driver tab > Unintstall button

  2. click on restart later. Do not restart yet, or it'll just reinstall the same version.

  3. download and install 8.771.1.0

  4 restart when prompted

  Is there a problem in which you were having that caused you to upgrade to the version you mentioned?

• Color picker out of gamut diferent alert warning of the range image? (CS5)

  I'm confused...

  I'm editing an sRGB image.  My custom proof condition is set to sRGB IEC, preserve numbers not controlled, BY intention or RC, PCBS. The range warning is enabled.

  I add some text and color using the text color picker tool. I have activate WARNING range in that and choose a color of the range e.g. #ff0000 off. I go back to the image and the text is * no * reported as being out-of-gamut.

  In fact * no. * color marked as OOG in the selector seems to be considered OOG, once I go back to the image with sRGB IEC selected, if they are when I select other devices to simulate.

  Why the disparity between the OOG WARNING image as well as the selector tool?  The tool uses another simulation device that I have chosen?  Who should I believe?

  Ian

  I guess the warning of the range Color Picker is against your workspace CMYK in the color settings.

• Scrollable Tabbar in Mobile App

  I put together a little proof of concept app mobile for my company using Flex and Air.

  I met a small sticking point by trying to set up a TabbedViewNavigator with 7 tabs.  The tabs get all crushed together, and I can't read one of the titles.  Is there a way to make the scrolling tabbar so that shponkah full-size can be seen and additional tabs can scroll to?

  You should be able to do this with a custom ButtonBar look.  Here is an example with attached custom skins:

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark" >

  @namespace s "library://ns.adobe.com/flex/spark";

  s | {TabbedViewNavigator #tabBar}

  skinClass: ClassReference ("ScrollingTabBarSkin");

  }

  s | TabbedViewNavigator s #tabBar | Scroller}

  skinClass: ClassReference ("NoScrollBarScrollerSkin");

  }

• Get the provider to payments overview button. How?

  Hello
  
  (N) payments > entry > payments
  In the preview window, you can see the PROVIDER button.
  
  I wish I could remove it to one of my accounts payable liability, so that the person managing it will not be able to access the provider (entry, update, etc.).
  
  Thank you very much
  
  emgee

  Hello.

  Open the preview of payment window and create the following customization:

  Condition
  Raises the event: WHEN-NEW-FORM-FORUM

  Action
  Type: property
  Object type: agenda
  Subject: PAYMENT Target. SUPPLIER_BUTTON
  Property name: POSTER (APPLICATIONS COVER)
  Value: FALSE

  Save your work, close all the forms and test.

  Let me know if it worked.

  Octavio

• Find people screen.

  Is is possible to default cursor on-screen people search employee number.
  
  now his is default employee number...
  
  
  Thank you
  Vinoth

  It is possible through customization

  Condition
  Raises the event - a TIME NEW FORM INSTANCE
  Condition - 1 = 1
  The two process - mode

  Actions
  SEQ - 1
  Property - type
  Object Type - point
  Target - EMP_QF object. NATIONAL_IDENTIFIER
  Name of the property - NAVIGABLE
  -False

  SEQ - 2
  Property - type
  Object Type - point
  Target - EMP_QF object. NUMBER_TYPE
  Name of the property - NAVIGABLE
  -False

  SEQ - 3
  Property - type
  Object Type - point
  Target - EMP_QF object. FULL_NAME
  Name of the property - NAVIGABLE
  -False

  HTH

• Is it possible to hide a conditional function in responsibility. Say it together a small number of users, I need the function display and for some users, it must be hidden.

  Is it possible to hide a conditional function in responsibility. Say it together a small number of users, I need the function display and for some users, it must be hidden.

  Hello

  The normal thing to do is to create a similar additional responsibility and using Exclusions to 'hide' the features you want.

  Then assign it to restricted users.

  Kind regards

  Bashar

• Customization of the OA framework supports conditional logic?

  I want to make a non editable field according to the value of another field of recording even in forms HTML Installed Base (self-service).  I don't see anything in the documentation or on the form of customization under functional administrator that would allow me to do.

  apps version 11.4.10

  Yes, you can do the same thing. Your condition is not met by using only the customizations. You will need to extend the View object and use SPEL.

  Reference:

  http://Oracle.anilpassi.com/SPEL-in-OA-framework-with-audio-visual-Demo-2.html

• CONDITION FOR THE CUSTOMIZATION OF THE FORM

  Hello
  
  I do a customization of the form custom in the form of recipes where I would read if invoices for Transactions Form that I'm about to apply are already taken into account or not.
  
  What would my condition for this?
  
  Thanks a lot for your help.
  
  Emgee

  Hello.

  Change the condition of:

  -3 = (SELECT posting_control_id FROM RA_CUST_TRX_LINE_GL_DIST_ALL WHERE account_class = 'REC' AND customer_trx_id =: APP_FOLDER.) CUSTOMER_TRX_ID)

  Octavio

• Conditionally Auto Fill a field on a page of the OAF by customization

  Hello
  I'm new to JDeveloper. Can someone tell me how conditional to fill in a field according to the prevoius field in a form OPS page customization.
  The page I want to do this operation is a SIT created with games of value attached to it. This SIT is called from a page hierarchy seeded by link Actions. There is no coding part in this page it's just personalization.

  This is clearly a question to ask in this {forum: id = 210}

  Timo

• How to find out whose Conditions are brought together in a book?

  I'm new to FM and I inherited a bookfile with 50 component files. Each has 20 available conditions, but it * seems * that only about 5 are never used.

  Is there a way to search or report on which Conditions are in use in the book (so I can check exactly what conditions are never used)?

  There are two lists you can build that will show you all the tags used in a book condition (and where they are in the game).

  1. from your book file, add > list of > references... and select Condition Tags. This will give you a list in order of occurrence in the entire book.

  2. from your address book to add > Index of > references... and select Condition Tags. This will provide a more concise list of individual tags Condition in alphabetical order, i.e. an Index. [This is probably what you want].