Toggling the selection (tail) outgoing and incoming (head) point of edition

Similar Questions

• EqualLogic GroupManager displays a different number of replicas, 2 outgoing and incoming 1.

  GroupManager displays a different number of replicas, 2 outgoing and incoming 1.  Is this a normal behavior?

  

  I raise this question to technical assistance from Dell.  They checked with their lab environment and confirmed the same behavior.  There is no functional cause whose status is displayed like this.  Two points, they said:

  (1) the number of the line leaving includes the history of replication.   It will show you an extra line in addition to the number configured in the replica set. (in my case, it's 1 (configured) + 1 (extra), so 2 total)

  (2) the number of the replica by entering the real number of replica set used for the function of data redundancy.

• Import questions of outgoing and incoming Web services in Siebel Client 8.2

  Impossible to import the outgoing and incoming Web services in Siebel Client 8.2 (Public sector) according to the installation instructions:

  Import the outbound Web Services

  To import the outbound web service, follow these steps:

  1. go in Administration-> Web Services-> outbound Web Services

  2. click on import in the outbound Web Services applet

  3. click on browse in the dialog box presented

  4. open the file < install_dir > /examples/SmokeTest/OutboundWebService.xml

  Oracle policy Automation Connector for Siebel Manual of Installation V10.3.0 23

  5. click on import in the dialog box presented

  6 highlight the DeterminationsServer file

  7. change the address < ds_url > /savon / AdminSmokeTest in the Ports of Service applet

  8. Repeat steps 2 to 7 Choose file

  /examples/SmokeTest/OutboundWebServiceIO.XML < install_dir >

  Import incoming Web Services

  To import the outbound web services, follow these steps:

  Go to Administration-> Web Services-> inbound Web Services

  1. click on import in the incoming Web Services applet

  2. click on browse in the dialog box presented

  3. open the file < install_dir > /examples/InboundWebService.xml

  4. click on import in the dialog box presented

  5. turn highlighted the strategy of automation Inbound folder

  6 edit each entry of addresses in the name of the machine hosting the Server Web EAI_Anon_Enu

  Extension, in the Ports of Service applet

  7. Repeat steps 2 to 7 Choose file < install_dir > /examples/InboundWebServiceIO.xml

  Nothing is imported to. Has anyone observed this problem? I use Siebel OPA 10.3.1 connector.

  Concerning

  Bhaskara

  you follow step manual installation that is a bit laborious.

  I think that you will get to see definitions of IO only after enabling view policy automation.

  I will propose you to complete all the steps and then check.

  in my view, import the RIS file will be easy compared to a manual installation.

  Thank you!

  Ravi

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• The selections of return and summary in the file menu are grayed out in the Fax Console in win xp pro sp3

  For some reason, send back them and resume of the selections in the file menu are grayed out in the Fax Console.

  There was a big shlep that I had to go through the correction of my database of security to get installed it.

  Someone knows what's going on here and/or can help me to be able to send faxes or resume a fax using Fax Console in win xp

  It seems they will be greyed out until the attempts have been exhausted when a fax could not transmit

• Object/image to toggle the selection question

  Went from CS3 to CS5 and discovered that they reorganized image selection. Can't tell if I'm cropping the image or resizing. With the selected object selection tool, the image of the circle seems to indicate that it is safe to crop, but it's still an uncertain when you work quickly. Is there any way to disable this, so I can go back to the more intuitive object select and direct, select as separate functions. (in other words, the default CS3)

  Really a pain when you're importing, cropping, and resizing. These object help executives fail to make the problem worse. I'm happy that they allow you to disable those 5.5.

  TIA

  View > Extras > hide content Grabber will turn off the "donut hole."

• Reduce the space between the Research/Action Bar and IR header

  I know, it's a small thing - the space between the Research/Action Bar and interactive report column headings.  But when you want / must include paging at the top of a report, the extra space looks quite great.  Here is an example based on the theme 21 Scarlet.

  WS: APEX_EXAMPLES_01

  Demo / demo

  Request 62650, Page 3

  Is there a way to reduce that extra space?

  Thank you

  Howard

  Hello

  I have added to the inline CSS page

  #apexir_DATA_PANEL{
  top:-20px;
  position:relative;
  }
  

  It seems to work OK with Firefox. Can not test other browsers.

  Kind regards
  Jari

• How can I increase the font size in gmail? Outgoing and incoming emails.

  Written as well as outgoing e-mail messages are too small. How can I increase the size on iPad?

  Settings > general > accessibility > Vision > try to modify the big bold letters, until you are satisfied with the results.

• System by saying that the mailbox is full and incoming messages blocked

  Receive a message from * address email is removed from the privacy * saying that my mailbox is full. I emptied all deleted records, trash and a lot of my personal files, but still no incoming mail

  This message comes from your server. Connect to their Webmail site and empty the Inbox here.
   
  If you use an e-mail such as MS Outlook or Windows Live Mail client, there is a parameter, you can uncheck so downloaded messages are automatically deleted from the server.
   
   

• How to get the selected tree node and its attributes

  I have a 'af:RichTree' on a page, which is linked to a support bean (session scope)
  
  Here is my selection Listener:
  
  {} public void groupTreeSelectionListener (SelectionEvent selectionEvent)
  RichTree tree = (RichTree) selectionEvent.getSource ();
  Model TreeModel (TreeModel) = tree.getValue (); / /--> this line causes a "pointer Exception zero."
  RowKeySet rowKeySet = selectionEvent.getAddedSet ();
  Key of the object = rowKeySet.iterator () .next ();
  }
  
  
  
  
  what I'll do is get the note selected and then get all the attributes of this node, perform other actions.
  
  
  Please advise,
  
  Thank you
  Shahab

  have not tried the tree component but cross chek well's Rowselection component of the tree. If so set to single or multiple

• SLQ: A loop with the select line, counters and variables

  Hello!
  
  I have a bit of a pickle SQL and would be very happy to any experienced help.
  I have a big enough table that contains two columns in particular (illustrated by a few examples)
  
  REFERENCE
  Mouth Med Chem (2008) 16, 1111-1124
  Bioorg Med Chem Lett. 2008 may 1; 9:2820 - 4 EPUB 2008 Apr 4
  BR J Pharmacol. In February 1999; 3:665 - 72.
  
  2_ YEAR
  1996
  2001
  
  Sometimes, the two columns are null. What I want to do, it is to loop through the table and pull on the date of the REFERENCE column and update the YEAR_2 column with it.
  
  My current code snippet is as follows:
  
  declare
  x number: = 1995;
  cursor s1 is SELECT rowid, t.* FROM CB1ASSAYS t WHERE REFERENCE like "%x % ';
  Start
  While x loop < 2006
  C1 loop s1
  Update CB1ASSAYS set YEAR_2 = x
  where REFERENCE like "%x % ';
  x: = x + 1;
  end loop;
  end loop;
  commit;
  end;
  /
  
  
  However, it doesn't seem to work properly. He updated lines with 1995 in the year, but no date higher. Curiously, he updated a number of records with the year 2064, when there was no 2064 anywhere in the REFERENCE entry.
  
  There are no errors encountered when I run this script.
  
  Any idea?
  
  Thank you!

  In your code the where conditions update should be:

  WHERE REFERENCE like '%'||x||'%';
  

  and you can get rid of the slider at all:

  declare
   x number := 1995;
  begin
   while x < 2006 loop
     update CB1ASSAYS set YEAR_2 = x
     where REFERENCE like '%x%'
     AND YEAR_2 is null --To update only null years
     ;
     x := x + 1;
   end loop;
  --commit;  IT's better you you commit after checked if all is ok...
  end;
  /
  

  Max

  Published by: Massimo Ruocchio July 5, 2011 19:59
  got rid of the cursor loop for...

• When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go of the mouse button and try to select more it goes to Negative (-) and removes all selections I made and won't allow me not one

  When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go the mouse button and try to select it goes to Negative (-) and removes all the selections I made and not will not let me add again. I never had this problem before, you usually need to hold down the Alt (or Option MAC) to subtract from selections. No one knows what happened or how to fix this problem, maybe a setting I accidentally hit? Thanks for your suggestions! :))

  Look at the options of quick selection - particularly the four icons on the left.

• HP M9000: Black screen after the "Starting Windows" logo and the windows on the screen

  I just gave me a m9040n HP Pavilion Elite with a Q6600 CPU, graphics card ge force and two 500 GB HARD drives in.

  When I starts it up it seems to be ok the HP blue screen will lights up at the start of the BONE and displays "starting Windows" on the screen with the windows logo. and then it goes to black with just the cursor on the screen. (Vista) So I know WHAT BIOS is ok, the graphics are windows allowed from.

  I went to the HP system F11 recovery and he seems to think that all is well... Very confused ideas?

  Thank you, Glenn...

  400workstation

  It looks like one or more of the boot loader files has been corrupted.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM of repair of Win7. This will repair the boot loader files, and if that is the problem, your PC will start OK after that.  Yes, it's for Win7, but Vista uses the same bootstrapper, so you can use Win7 to repair the Vista bootloader files.
  
  The file you need can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If it isn't, then some files of the operating system has also been corrupted and the only way to fix it would be to perform a system recovery - which if F11 does not work, but a recovery from the PC to its original using recovery media state.

  Problem there is that HP no longer wears a recovery media for the Vista PC, so you should check to see if these sites still have it: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• How to make a good UI for the selection of the channels with DAQmx

  A lot of my Labview programming accompanied verisons them previous LabVIEW (pre Labview 7), and there are a ton of new features I am digesting (currently using Labview 8.2).

  My question is (in general), how people schedule their user interface for the selection of channels and others when using hardware DAQmx?  What I have in mind is a system compacDAQ with a number of modules.  The user would be able to choose which channels to watch.  With the help of MAX as part of this process seems counter intuative and somewhat static (yes I know you can change out there, but it feels more like something you would use for something that doesn't really change much).  I wish that all the UI within the VI.

  Programmers use the task of creating screw for this or something else?

  Thanks in advance.

  ChuckNRC,

  I tend to avoid using MAX and create all my channels/tasks using the DAQmx functions.  There are also having some DAQmx features that allow you to save/remove channels, tasks and scales to MAX.

• How to cut a shape of the object a picture and put it in its own?

  Photo cut and save

  How to cut a headshout of one person on a phot with several people in it and then save it as it's own photo?

  You might cut back on the part you want to save as a
  new photo.

  (be aware... If the original photo is not high quality...
  your cropped section can be grainy)

  Many photo editors have the ability to crop but since
  I don't know what you have installed... I'm going to suggest
  Windows Paint... (Start / Programs / Accessories /)
  Paint) to help you get started.

  Try to open the picture in paint.

  File / open... Find and select your photo.

  In the top left panel, left click the Select button.
  (looks like a rectangle made up of points)

  Left click / drag a rectangle around the portion of the photo
  that you want to copy.

  Now, you'll see a dotted line around the selected area.

  Reach... Edition / copy.

  Reach... File / new.

  Reach... Editing / paste.

  Reach... File / save as.

  Choose a backup folder.

  Enter a name.

  Choose a format (JPEG).

  On the left, click on the "Save" button.