too long paths for indicator

Similar Questions

• How can I remove a file with the long path?

  I got a file and when I try to delete it, it says: the file path is long.

  Thank you
  Angelina

  Hi Angelina,.

  Thanks for posting the request in the Microsoft Community.

  1 are. what file you referring?

  2. the problem occurs for a specific file?

  To resolve this problem, you can try renaming the file and try to remove. Check if the problem persists.

  Alternatively, you can check the link for more information:

  Error message too long path when exceeding MAX_PATH

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Path too Long for the Installation of the software

  I am trying to install a version of the CAD software to one of my PCs employee.  When we run the Setup file, we get an error message too long file path.  The message says that the file path is 99 characters long, but the limit is 93.  This seems like a terribly low limit for a C: drive.

  The path goes only in a folder as well.  Thus, its C:/Program Files/Autodesk / "name of file along here."

  I understand long path problems when you go deep in several folders and the typical character limit is 254.  I do not understand why we are running in a limited issue when you have only a single deep folder on the C: drive and only have 99 total characters in the path.  Is this a problem of windows 8?  Or maybe a problem with the PC itself?  Is it possible to change the limit of characters on the C: drive since 93 is so short and also seems to be a random number?

  Justin

  Your best bet is to contact the CAD developer, we would have no way of knowing how many levels deep the software installs.

• Path and file name of the message is too long to be copied-how fix?

  On Windows 7, TB ver 24.6.0, I use a program called SecondCopy to copy my email when my C drive on my desktop to our file server.

  I get several messages each day like this one for the copy be saved on our network data sharing:

  04/07/2014 21:07:16 - failed to create \\Oz\Data\System\Users\billr\AppData\Roaming\Thunderbird\Profiles\5kxps6et.default\ImapMail\imap.googlemail - 4. com\INBOX.mozmsgs\urn.correios.msg.201211050157328fade3baa08b405e9a940681276b34d9%401352080653478.rte-svc-onebox-na-1d-i-8da6c8f1.us- east - 1.amazon.com.wdseml cannot create the file «» The file name or extension is too long

  I did some shorten folder names, but my names pale in comparison with the LOOOOONG TB gives them names.

  How can I fix?

  I did some shorten folder names, but my names pale in comparison with the LOOOOONG TB gives them names.

  This is because the wdseml files are just files created in order to allow windows to search to index your mail. I will not allow it and safe lots of disk space completely wasted on a feature that I don't use. Thunderbird has a search engine perfect condition. At least as good as windows search.
  Your mail is stored in highest MBOX files in the profile as well as a file of the same name with an extension of MSF that indexes the contents of the folder. One file and one index per mail folder. In the above example, it will be \\Oz\Data\System\Users\billr\AppData\Roaming\Thunderbird\Profiles\5kxps6et.default\ImapMail\imap.googlemail - 4. com

  So I suggest backing up your profile under these space takers and seriously consider just disable windows search. Menu (Alt + T) tools > options > advanced > General in respect of the integration of systems.

  In addition we have all to live in the 256-character limit on the length of the path imposed by windows.

• Deploy the RT too Long of generic IO file path

  So I've been fighting with this configuration and mistakes on deploying code to an embedded target RT.  I have a RT Linux cDAQ-9132 and I found that if my path is too long, it will give strange errors.  Sometimes the error will be on the opening, the project gives 'Generic IO to file' but is the VI opens without error.  And sometimes I see "loaded with errors on the target and was closed" on the deployment.

  The path to the code reuse in the user.lib is similar to the following:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2015\user.lib\_xxxxxxx\Automotive Communication\CAN Drivers\Generic PEUT Drivers\CAN Class\Public\Signal Conversion\Read signals Polymorphics\Read - Single Sample_xxxxxxx.vi

  Who are 233 characters including slashes and semicolons that falls within the limitation of 260 Windows (or 255).

  An example of this is attached.  Unzip the user.lib zip in the user.lib and open the Test of RT project.  It's a RT. target but open just the RT Test VI.vi should show the generic IO file error and the VI appears missing on BD.  If you then open the signals of read - only Sample_xxxxxxx.vi the VI loads without error and high level VI can be executed without error now.

  I've not seen it documented anywhere, but is there a limit to the length of file that causes this problem?  Is there a document indicating how deeply in the re-use of user.lib can be?  I know that my ways were becoming a bit long but also noticed Windows length had not been exceeded again.  And is it possible that if this limtiation exists, that we will have a little more useful error?  Thank you.

  Windows 7 x 64, 32-bit LabVIEW 2015.

  
  

• "Path too long" error during extraction solution zipped

  When retrieving a zipped VB.Net 2008 solution, I get an error indicating "Path too long" and the inscription NationalInstruments.Common.Native.dll.deploy (see attachment). I have recently started getting as this error message and I don't want to just choose the option 'Ignore' because I don't know if I need this file or not. Any suggestions?

  Tim

  I rebooted the computer and the problem disappeared. But I'll try the longpathtool if the problem comes up again and I can not solve by restarting.

• Windows xp - path too long

  Hiya,

  I work for a company to use the digital camera and retrieve images dailly.

  However, the memory card, I'm trying to use won't be open, "path too long". I clicked on 'Properties', where it is said there are files and folders in there.

  Please could you help me to get into these files, it is very important recover us these photos.

  Thanks again x

  EDIT: Sorry I seem to have posted this in the wrong section - I posted 1 in the section "xp". Sorry, this is the 1st time I used microsoft answers xxx

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Cannot delete the file - paths are too long

  Trying to delete a folder.  He complains that the folder contains items whose names are too long for the Recycle Bin.

  The problem I think is that this folder is a backup copy of an old folder AppData, in which it seems to be an almost infinite folder "Application Data" series - I am sure that these are in fact the links as opposed to records, but there is a huge tree full of them.  At the end of some branches, there are some 'real' files, but then several sub-branches of Application Data files.

  So I guess that when I try to remove the top-level folder, the full path to the way in which the files down is just too long.

  When I shift-DELETE, nothing happens, and I tried to remove it from the command prompt, nothing helps.

  Don't know what to do next.  I want to just get rid of the folder tree.

  Mike

  OK, well, irritating as it is that there is no apparent way to force Vista to do, I just crossed the entire folder structure and renamed each 'Application Data' folder to 'a', to shorten the overall paths, and this then allowed me to remove the top-level folder.

  Mike

• Error message: "the file names would be too long for the destination folder.

  I move the files from internal hard drive to external hard drive using cut and paste.  I get a message "the file name would be too long for the destination folder.  You can shorten the file name and try again, or try a location with a shorter path. "I then gives me choices to skip or cancel.  What happens to files that are ignored?  Are they deleted?  I don't want to lose all the data, but there are more 2 000 files with this problem, so passing by and rename each one really isn't a viable solution.  I don't really understand how the file names were originally created/saved about a problem that is only now that I want to move them.  The disc source and destination are NTFS.  Is there a solution for this?  It is imperative that no data is lost.  Thanks for any help you can offer.

  On Wednesday, 10 April 2013, 12:16:23 + 0000, MADinIowa wrote:

  I move the files from internal hard drive to external hard drive using cut and paste.  I get a message "the file name would be too long for the destination folder.  You can shorten the file name and try again, or try a location with a shorter path. "I then gives me choices to skip or cancel.  What happens to files that are ignored?  Are they deleted?

  N ° to check that what I say is correct, create a new folder
  for the purposes of the trial and to make a copy of some files. To ensure that
  one of them has a long name (rename if necessary), and then try to copy
  These files on the external drive. When you get the message, choose
  'jump' and see what happens.

• How to find files whose path names are too long to copy to an external drive?

  Hello all,.

  I copied a folder containing files 6 854 into 1 329 folders on an external USB drive.  On the way, I got a total of 677 reviews "path too long name.  After the first few opinions, I clicked on the option "ignore all".

  Now I want to find the files that incriminated, whose name, or the path is too long to copy, and then copy them all to a single high level external hard disk folder.  Is it possible in Windows Explorer to search for names of files/paths that exceed this limit?

  Thank you

  ~ Jeffry

  Hello, WHS - frustrated.

  Because you are using Windows Home Server, please transfer this issue to the address provided below.

  Windows Home Server

  http://support.Microsoft.com/ph/12624

• empty folder named "enteral" will not go into the existing folder on desk too long because "Path of Destination."

  Make an empty folder to simplify the example of this problem recently of news. Everything I do, even a single word names, will not go into any other file with this next window: "Destination path too"

  long. "

  The file names (s) would be

  be too long for the

  destination folder. You

  can shorten the file name
  and try again, or try a

  location with a

  shortest path.

  Hello

  Welcome to the Microsoft Community Forums.

  Looks like you get an error message "the file (s) would be too long for the destination folder. You can shorten the file name and try again, or try a location with a shorter path.

  This normally occurs when the file system is corrupt.

  I suggest you scan the computer for the error. Follow this step to do the same thing:

  1. click on start
  2. type: CMD, according to the results, right-click CMD-> click 'run as administrator '.
  3. at the command prompt, type: chkdsk /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  In addition, you can consult the following link for more information:

  Check a drive for errors

  Hope this information helps. Get back to us with more information so that we can help you.

• When you back up my files to a new hard drive, getting the error "destination path too long".

  Hello

  Today I was backing up my files on a new hard drive that I bought a week ago, and during the copy, I received the message following 'destination path too long ".
  And the file name is actually short "crouch" here is a snap of the image:

  http://imgkeep.com/0ij23kby74dn.html

  I don't know what to do!

  Original title: destination path too long?

  The key factor is not the name of the file itself, but the total length of the file name and the path of the folder.

  The help files for the application that you are using could tell you how long the total combination of the file-file may be [some more older can be limited to 255 characters, but I was not able to discover the current constraints].

• Path too long to remove

  I have a folder that contains subfolders that create a path that is too deep to remove...  It has a structure like: Pictures\Documents\My Pictures\Documents Documents\My... etc of the infinite that I see...  This is not the default My Documents or my pictures special folders in the profile but are located in a separate HARD disk area.

  I've renamed 30 or if for just a\b\c\d\e\f... then I fail to rename folders that Explorer can see... When I try to delete the last folder in my opinion, it says the path is too long.

  Anyone know of any free tool that allows you to remove this invalid structure.  I don't want to pay for anything, since it will be a single use and will probably never reuse the product...

  I tried to map a network drive to a level about 30 deep...  I tried the subst command... Nothing works and I get the same error that the path is too long.

  Thank you

  Bryan

  A ran chkdsk and had no errors at all...  I finally solved it with a utility called DelInvFile.   Analysis of the folder with this utility, revealed the 747 levels of subfolders.   He took care of all of them and deleted the whole tree in about 5 minutes...

  Thank you

  Bryan

• Indicator takes too long to load! How to fix?

  I have a question, after I typed my correct login information and try to connect through creative cloud that this indicator of loading lasts too long more than 15 minutes on my decent connection! It's frustrating for me, I tried the cleaning Cloud Creative tool and I uninstalled previous versions of adobe products, and I tried to rename the dll located in the user temp files or completely remove the OOBE folder! I've done everything I can. but still it is not letting me connect to download my last AE and PS apps! This is the link below for the GIF to have a better understanding of what I mean exactly after I connect...
  Gyazo - 955f1152a0dca08f501b0c3cf2d645e6.gif

  Hello

  I think you found the turning wheel on the Adobe CC application.

  Please check the help below document:

  Does not open App | Wheels of progress turn continuously

  You can also view the nets below where this issue has been addressed:

  Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

  Creative Cloud Desktop App taped blue spinning wheel after update.

  Kind regards

  Sheena

• That the face is lit mode bedside table may be shortened? He remains too bright for too long

  That the face is lit mode bedside table may be shortened? He remains too bright for too long.

  Hello

  No, it is not currently possible to customize the duration for which the screen remains lit mode bedside table.

  If you want to send feedback or feature requests to Apple, you can do so here:

  https://www.Apple.com/feedback/watch.html