Too many audio channels...

Similar Questions

• Too many audio tracks and effects, which makes export difficult

  I'm trying to export a first draft which takes about 5 minutes. It contains 8 different audio tracks, in addition to having almost all of the clips video related to EI 100. So needless to say that the encoding and export will take some time., after half an hour, even not 1%.

  I guess I was wondering if anyone had any suggestions on ways to improve the speed of export? Apart from the various forms of suggestions already spoken on cards similar as below.

  http://www.premiumbeat.com/blog/14-tips-faster-rendering-effects/

  I'm rationalizing all the audio as much as possible.  It would improve speed significantly to export only the audio and then go back and export with the newly exported single audio track? Or is it all dynamic links on AE that make it so slow?

  And sorry if this is already, was a research-specific item type.

  The render and replace the settings I use.

  

• too many audio files... AS3 don't worky

  I created this little program to test with.  , It works perfectly for audio files or equal to 5 / for loops.  As soon as I do more while the sounds stop functioning. Everything else is fine, just no sound. My plan is to have the xml file determin how much sound to create video clips with attached files. I intend to have a ton of video clips and audio files once it is finished.  No luck so far
  
  is there a limit to how much sound swf files can reference? Any other ideas why the sounds do not work for me?

  //load xml
  var xmlLoader:URLLoader = new URLLoader();
  var xmlData:XML = new XML(); 
  var xmlPath:String = "data.xml";
  xmlLoader.load(new URLRequest(xmlPath));
  trace("loading xml from: " + xmlPath);
  xmlLoader.addEventListener(Event.COMPLETE, LoadXML);
       
  function LoadXML(e:Event):void {
       trace("xml loading complete");
       xmlData = new XML(e.target.data);
       //load objects
       buildScroller();
  }
  
  function buildScroller():void{
       var tl:MovieClip=this;
       for (var i:Number = 0; i < 5; i++){
  
          //create movie clips
          var container_mc:container = new container();
          addChild(container_mc);
          container_mc.x = 325 * i;  // set the number here to the width of the movie clip being repeated
          
          //sound info
          tl["snd"+i] = new Sound();        
          tl["snd"+i].load(new URLRequest(xmlData.sound.loc[i]));
          container_mc.snd = tl["snd"+i];
          container_mc.addEventListener(MouseEvent.CLICK, playSound, false, 0, true);
  
          function playSound(event:MouseEvent):void {
              event.currentTarget.snd.play();
          }
       }
  } 
  
  
  

  Here is the xml file that I use:

  <DATA>
      <object_count>20</object_count>
  
      <sound>
          <loc>fart.mp3</loc>
          <loc>burp.mp3</loc>
          <loc>creak128.mp3</loc>
          <loc>GateOpen.mp3</loc>
          <loc>bang.mp3</loc>
          <loc>pop.mp3</loc>
          <loc>slap.mp3</loc>
      </sound>
  </DATA> 
  
  

  >y at - there a limit to how much sound swf files can reference?

  N °

  First, remove the playSound function of inside the for loop and inside buildScroller. Nested functions are bad programming. In addition, why are you doing tl ["snd" + i] and not only container_mc ["snd" + i]? I don't know why you don't put them only in the container clips themselves if that's how you want to do.

• You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  tried in SOUND > Speakers > CONFIGURE it on by clicking on the right left speaker sound time and vice versa.

  Hey DiegoWO,

  There is not currently an option within the OS to achieve.
  However, your drivers audio pourrait have a built-in effect that allows you to reverse the stereo sound. If you do not see a separate application to manage your sound, you will need to visit the website of the manufacturer of your sound card and install the latest drivers.

• Configuration of the audio channels in PP 2015.3 v10

  Hello

  I noticed that the path of the Audio track has changed to the Configuration of the Audio channels in the settings of export of the latest PP. Unfortunately, this affects the way in which players such as QuickTime read the layout of the audio channel.

  For example, I went out a DNxHD MOV video with 24 channels for a customer. I attributed to them in my PP of the project and am ready to the output file. The previous version of PP has allowed you to assign titles in the drop-down menu, the Audio track route which, in turn, allowed to see each audio channel / stem in the movie in QuickTime player Properties menu option.

  Unfortunately, in the last version of 2015.3, my final file of DNxHD output has all channels play off the one audio track when opens in QuickTime player. However, I don't see all the audio stems when I reimport the DNxHD PP file so I think that this only affects the software outside Adobe.

  I wouldn't mind not so much, but the customer would like to see the audio presentation in QuickTime player, so I'm a little confused as to what is wrong here with the last update PP.

  Why this changed in the first place? Any help will be very appreciated!

  Concerning

  Tony

  System specifications:

  Premiere Pro 2015.3

  Windows PC 10, 16 GB of RAM

  So, I thought about it fortunately! So you have to choose Audio MONO Channel Configuration settings and then add as many channels as you need (for me it would be 24 mono tracks). As long as you properly assigned audio channels of your sequence, then the output file should be fine.

  This seems a strange and unnecessary change for me - I don't know Adobe not have their reasons, but that would have saved me some valuable time if we have correctly explained in the update notes!

• Many audio tracks imported

  Hi guys,.

  I work with PP CS6, some original sequences (from camera Panasonic) has 4 tracks, but two of them are empty.

  It's really annoying delete the two empty traks of each element, and I don't want to have many audio traks in my calendar!

  I would like to find a way to import and place in the line of time ONLY TWO AUDIO TRACKS instead of FOUR.

  Thanks for the tips

  Fabrizio

  Select all your clips in the project Panel, right-click and then modify / Audio channels. You can then edit your audio tracks on:

  

• Multi-cam sequence only ONE AUDIO CHANNEL LEFT, Adobe Premiere Pro CC TIMES.

  Hi all

  I was wondering if someone could help me out here. I have several hours of short clips (1-3 min) of an event of 3 days I am organizing and preparation for editing.  I wasn't on the shooting, but the cameras record the external microphone (main audio) on one channel and the internal microphone (audio reference) on another channel; but it varies on what channel they recored reference main vs.  For the clips where someone talking directly to the camera and I know that I will not need the audio reference, I went and made "audio editing" and mixed the "stereo" until "mono" and then selected the channel with the "audio main' to be source channel.   It works now great when the person talks it comes in evenly on the left and right speakers instead of being unbalanced.

  However, when I then try to take 2 of these clips which were mixed at the bottom of 'mono' and create a new multi-cam sequence, new sequence plays constantly audio only from the left lane.  I tried many configurations where do the multi-cam of sequence (automatic, mono, stereo, Adaptive). Nothing works - he ONLY plays the left side.  I also tried to change the audio channels after I do the new sequence and put "Channel 1" in both channels left and right.  Nothing, he still plays on the left side.

  Any idea on how to get my mono source channel to play regularly in the left and right channels instead of only in the left?  Also, if I try to Pan right in the effects window, it's just quieter, not balanced.

  Thanks for the help!

  Found a solution here multicamera Source Audio sequence of 1 speaker instead of two? HELP Please!

  CTRL + N or command + N for a new sequence, select your preset (in my case DVProHD > 1080i) and make sure the audio channels are all mono. Then copy and paste all your clips into the new empty sequence.

  When I upgraded from Premiere Pro CC 2014 and 2015, all my sequences blocking started playing mono audio through the left speaker only. I'd just create a new multi camera sequence or if I opened one I had created in 2014.

• Canon xf105 - multi audio channels in CC import mxf files

  Hello

  We have recently upgraded to CC in all of our Department, and I am importing filmed on our Canon XF-105 using the MXF wrapper. 5.5, I could simply drag and drop the project in the timeline panel and have two audio channels recorded it. CC, I see that the audio recorded with channel 1 and my clip in this instance has been connected to channel 2. Is this something that is known? Did I miss something about the configuration of the project?

  Thank you in advance for your help!

  Everything you need to know about the project or files, give me a shout!

  See you soon,.

  Paul

  Many things have changed since 5.5.

  You need configure preferences before importing it.

  Contained stereo to Mono Audio / default of Audio tracks.

  Or change the audio channels of clips in the project window.

  

• Export MXF with several audio channels for broadcasting

  Hello

  I work in a company of broadcasting as a Publisher. We have always used FCP with the free plugin sony xdcam to export. This plugin seems to be one of the few ways to export a MXF with 4 audio channels. I don't know exactly why we need to export it for broadcasting with 4 audio channels, but we do.

  Given that our workload has increased significantly in recent months and it will no longer are optimizing our workflow. We also work with many different endboards in After Effects, and we made a nice model to work with. And since AE and first can make a dynamic link we are considering changing from FCP to Premiere.

  Now the question arises! : the only obstacle that we could not find a response to export it with 4 audio channels as a MXF of first CS5. Will there be the development on this level for CS6?

  A solution to this should save us a lot of time!

  Any help will be very appreciated!

  I've also attached an example for standard MXF files we export

  

  CS6 now allow export desired in native mode.

• Implemented too many icons Watch BONES 3

  I have updated to OS 3 and my watch has too many icons. With iOS 10 I removed the stock, find friends and home, my phone icon, but even if these applications are past the watch and phone their icons are on the dial of the watch and I can't delete them.

  Anyone have any ideas. Too many too cluttered icons.

  Might be able to 'hide' apps > http://www.cultofmac.com/320530/personalize-your-apple-watch-home-screen/

• How to get my bowser to work again get message of safari too many redirects

  I am using iPad Air get message saying Safari is usually download page due to having too many redirects!

  How can I fix it?

  Tap Settings > Safari > advanced > Web site data

  It will take some time.

  Scroll to the bottom and press 'delete all the data of the Web site.

  If this does not help, try restarting by Force.

  https://support.Apple.com/en-us/HT201559

• "You've done too many attempts to answer your security questions.

  How can I reset this error?

  "You've done too many attempts to answer your security questions.

  You either wait to see if you can try again later, or you will need to contact the Apple Support to get them reset: SUPPORT of SECURITY ACCOUNT

  Good luck

  GB

• Cannot connect to the macbook pro guard icloud password request which I changed it too many times I don't remember and it still does not

  Can not connect to macbook pro, that keeps asking for password to icloud I have reset too many times I do not remember. Reinstalled operating system still does not work. Think to screw up the laptop and get back to a Windows machine. Not impressed with Apple.

  To connect to your computer, you must enter your computer in password journal, not your Apple ID.

  Otherwise, provide more details on exactly what is happening on.

  Writing an effective question of communities of Apple Support

• Too many attempts of incorrect verification

  I answered the wrong questions in two attempts.

  Later / again changed the questions and answers. To emergency email.

  But whenever I try to enter new responses, this message appears...

  Too many attempts of incorrect verification

  You made too many attempts to answer your security questions. You can try again later or use your rescue email address to reset your security information.

  Please I want a solution to this problem

  Hello

  If you are unable to reset your security questions, you will need to contact the Apple Support.

  The information is available here:

  • Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  (I'm afraid that no one here can solve the problem for you.) You don't talk to Apple here - it is a community based on the user).

  More information:

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• On sending a message, the server sent a wrong message: #4.4.5. too many connections to the host

  On sending a message, an error has occurred "the mail server has sent a wrong message: #4.4.5 too many connections to this host..."
  The mail is displayed as sent in envoys, but is not received by the recipient. On sending several messages to test myself this fault seems to be intermittent.

  Hmm did you get mail outbound scanning performed by an anti virus program? Turn the power off.

  Have the e-mail account on your phone? try turning off your phone.

  Is the IMAP or POP account?