Too many slashes in DW 4 the old code, the new code is good to DW MX

Hi all

I've been on this forum for Adobe Premiere and Adobe After Effects, but it's my first time for Dreamweaver.

I am currently using Dreamweaver MX 2004 on Windows 8.1.

I have an old site, I did that I am the resurrection, it is archived on a CD, and the last time it was online in 2008.  College-simile of the HTML pages in the beginning, I created in Dreamweaver 4 between 2000 and 2005, and the new pages were created in 2006 and 2007 in Dreamweaver MX and in 2008, pages worked and display correctly in what were then current versions of Internet Explorer and Firefox.

But now, in Google Chrome (last updated) and Internet Explorer 11, more older pages that I created in Dreamweaver 4 have a slash at the beginning of each image and each name link in the page code, and all the slashes make it bit so none of the pictures appear and none of the links work in the current version of Google Chrome and IE 11 , but the pages that I created in 2007 in Dreamweaver MX, everything works fine in modern browsers, because the code in these pages does not have a slash before the name of each image and each link name.

Examples...   ' / imagename.jpg " against "imagename.jpg" or " / nextpage.html " from "nextpage.html"

From what I understand, older browsers to tolerate these stray oblique at the beginning of each image name and the beginning of each link name in the HTML code of the page, and these older browsers would display images and links work on a Web page or not those extra reduced forward were in code.

But apparently the most recent browsers Google Chrome and IE 11 will not tolerate these oblique extra, and so these Web pages of mine created in Dreamweaver 4 especially vacuum display in browsers... I did not yet any test in Firefox or the new versions of all other browsers.

So MY QUESTION IS... is it possible in Dreamweaver MX to quickly remove all the obliques that appear at first the name of the image and at the beginning of every link in the code names, without deleting all others forward slashed.

Do this manually or with "Find and replace" in the code is not an option... most of these pages slices or with large sections of slices and a large number of links on every page so edition manual is not a solution for this problem.

I tried variations of the command, "Clean up HTML" in Dreamweaver MX, but that did nothing.

Thanks for any input.

Digi

If I had to change the links to my pictures, I use find and Replace dialog as follows

I do this because I know what I'm doing and know that the action cannot be reversed once started.

This is the reason why Murray asked for a link to your site so that it can give you a solution tailored to your problem.

Tags: Dreamweaver

Similar Questions

  • I want to cancel and get my $$$ back, because the conversion using Adobe export in format PDF to Word does NOT, too many errors and inaccuracies in the Word DOC to use. Please cancel my order AD017941759 as soon as POSSIBLE!  Thank you...

    I want to cancel and get my $$$ back, because the conversion using Adobe export in format PDF to Word does NOT, too many errors and inaccuracies in the Word DOC to use. Please cancel my order AD017941759 as soon as POSSIBLE!  Thank you...

    You will be eager to start here:

    Cancel your subscription or membership. Acrobat, services Cloud of Document PDF

    Be well...

  • Pulling in too many sheets when printing to the printer.

    I have an Officejet 7310, which pulls in too many sheets of paper when it prints. This seems to be the case with all types of 8.5 "x 11". Any ideas? Thank you!

    What is the weight of the paper

    If you use 20 lbs

    try the 24lbs

    Also check the properties of the printer of somewhere the on this box or

    It's in the preferences

  • PLS-00307: too many statements - overloaded method w. the date and time stamp

    I ran in an overload situation but can't seem to find out exactly why the following error occurs:
    create or replace package pkg_overload
    as
      procedure overload(p_in in date);
      procedure overload(p_in in timestamp);
    end pkg_overload;
    /
    
    create or replace package body pkg_overload
    as
      procedure overload(p_in in date)
      as
      begin
        dbms_output.put_line('overload > date');
      end overload;
    
      procedure overload(p_in in timestamp)
      as
      begin
        dbms_output.put_line('overload > timestamp');
      end overload;
    end pkg_overload;
    /
    When I run the overloaded methods sysdate and systimestamp, I get an error on the timestamp:
    exec pkg_overload.overload(sysdate);
    
    overload > date
    
    exec pkg_overload.overload(systimestamp);
    
    Error starting at line 27 in command:
    exec pkg_overload.overload(systimestamp)
    Error report:
    ORA-06550: line 1, column 7:
    PLS-00307: too many declarations of 'OVERLOAD' match this call
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    06550. 00000 -  "line %s, column %s:\n%s"
    *Cause:    Usually a PL/SQL compilation error.
    *Action:
    It seems that Oracle is trying both the implicit conversion of the timestamp to date and no conversion, thus obtaining the error PLS-00307. Can anyone provide more insight in this? Is their still around him (in addition to creating a single method named timestamp procedure)?

    Thank you

    Martin
    -----
    http://www.talkapex.com
    http://www.clarifit.com

    SYSTIMESTAMP is a TIMESTAMP WITH time ZONE SCHEDULE. You must provide a separate overload for the TIMESTAMP WITH time ZONE SCHEDULE (and you'll probably want one for a setting of TIMESTAMP WITH time ZONE SCHEDULE LOCAL as well).

    SQL> ed
    Wrote file afiedt.buf
    
      1  create or replace package pkg_overload
      2  as
      3    procedure overload(p_in in date);
      4    procedure overload(p_in in timestamp);
      5    procedure overload(p_in in timestamp with time zone);
      6    procedure overload(p_in in timestamp with local time zone);
      7* end pkg_overload;
    SQL> /
    
    Package created.
    
    SQL> ed
    Wrote file afiedt.buf
    
      1  create or replace package body pkg_overload
      2  as
      3    procedure overload(p_in in date)
      4    as
      5    begin
      6      dbms_output.put_line('overload > date');
      7    end overload;
      8    procedure overload(p_in in timestamp)
      9    as
     10    begin
     11      dbms_output.put_line('overload > timestamp');
     12    end overload;
     13    procedure overload(p_in in timestamp with time zone)
     14    as
     15    begin
     16      dbms_output.put_line('overload > timestamp with time zone');
     17    end overload;
     18    procedure overload(p_in in timestamp with local time zone)
     19    as
     20    begin
     21      dbms_output.put_line('overload > timestamp with local time zone');
     22    end overload;
     23* end pkg_overload;
     24  /
    
    Package body created.
    
    SQL> set serveroutput on;
    
    SQL> exec pkg_overload.overload( systimestamp );
    overload > timestamp with time zone
    
    PL/SQL procedure successfully completed.
    

    Justin

  • Too many data stores appearing during the creation of Prot Grp

    I have a problem when you create a new protection group in SRM 4.1.

    Background:

    I am trying to protect only 2 virtual machines (vmsql 1 and vmsql2) that are on the same data store (datastore5). However when I run the new protection Group Wizard, srm trying to protect the 2 vms above on datastore5 AND 4 other data warehouses (and their virtual machines).

    This "behavior" is usually because a virtual machine was a 'link' to another store of data EG one or more of its VMDK resides on other data warehouses or he has a link to CD with an iso on a different data store.

    I checked the 'change settings' vmsql1 & 2 and all their VMDK (and RDM) are on datastore5 and there is no CD of iso connection.

    I went through datastore5 and the only files / folders on datastore5 for vmsql1 & 2 (except hidden for distributed switch folders).

    I looked at the other VMS (I don't want to protect) to see if they have all the settings for CD or vmdk linking them to datastore5 and there is nothing obvious.

    So my question is... Whats connecting these other 4 data warehouses to datastore5?

    I: vc restarted on both sites, rebooted srm on the two sites, reanalyses berries from srm on both sites and re-analyzed VC (in two places), data warehouses also led lsof and ls - la on the esx hosts, but nothing unusual turns

    More info: vmsql1 and vmsql2 have been passed to datastore5 recently - off voltage and storage-vmotioned on datastore5

    ESX 4.1 U2, VC 4.1U2, IBM XIV

    Hello

    No doubt those LUNS are part of the same group of coherence on the storage array.

    When MRS. detects a consistency group, it places all of its LUNS in the same group of data store.

    Michael.

  • Dreamweaver CS3 too many activations have more access to old computers

    Hello

    Told me to ask this question on the forum about an error I get with Adobe Dreamweaver CS3, it's a key to license of Volume used by my company, but she has managed activation too, and I have more access to previous computers it has been installed on (or discarded decomisioned).

    I talked via an online discussion for activation reset, but I always get the following error message when I try to activate my paper in Dreamweaver CS3.

    Please someone from Adobe can help.

    Error.jpg

    Sorry to hear that Thomas. I will contact you for the serial number and will solve this problem for you.

  • Too many anchor points and simplify the mess to the top of the photo

    I take a picture and I have a problem - I need a maximum of 2000 anchor points, and I have about 11 k.

    Looks like I have a lot of useless points, but when I try to simplify the image gets all messed. Another way to solve this problem?

    Here is a part of the image, we see that many of the points do not have to be there...

    http://i21.photobucket.com/albums/b283/appelsinbrus/anchorpoints_zps86311cb2.png

    Lars Jørgen,

    Whatever the version, you should be able to:

    (1) select a red path and select > same > fill color,.

    (2) pathfinder > unit/add to shape area (you may need to press Alt/Option to get simple traces if yes, you will get a warning about it);

    (3) separate if you wish.

    Who should group all sets of overlapping paths of this color in unique paths, some of which may be composed of paths, with all the unnecessary layers and their Anchor Points removed.

    Edit: If you use British English in the first sentence, you can spell it without getting caught by the filter of the nanny.

  • Too many items to menu in the application will result in failure project packaging

    Hi all

    I have a problem in my application when the number of the menu in the application items exceeded a certain number of the packaging project fails.

    When I tried to the bottling of the project in eclipse, an error message was the result:

    I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified
    Packaging project Myproject failed (taken 6,391 seconds)

    But when I remove one menu item package succeeded.

    What could be wrong.

    Thanks in advance.

    Thank God,

    I found the solution:

    I'm not sure but I think becaue I use (Blackberry JRE 5) so I need JDK 6 more to update 20.

    But what makes issue resolved that:

    I installed (JDK 6 update 21) and put the path to the bin folder in environment variables.

    Here is the link to download (JDK 6 update 21):

    http://download.Java.NET/jdk6/6u21/promoted/b05/binaries/JDK-6u21-EA-bin-b05-Windows-i586-29_may_201...

    To add the environment variable:

    Right click on my computer > properties > advanced > environment variables:

    system variables:

    Double click PATH, and then add the path to the bin folder (can be like this: "C:\Program Files\Java\jdk1.6.0_21\bin")

    I hope this will help one.

  • Too many files are returned by the search

    I have thousands of files I need to travel from time to time for specific identification numbers.  The numbers are in the format "00-00-00 '.  When I do a search for content of file using Windows Explorer, I continue to receive files with even part of the search string.  I went into the folder options and not them 'find partial matches' and ' language search natural use "options, but I always get a hundred of files returned, do the wasted effort.  I tried to enter the string search with and without quotes, but it seems to make no difference.  My question is 1) is there something special I have to do because the research focuses on numbers and 2) so I have a result of unacceptable research, so I have to delete the Index or something to not keep the same result?

    Try this special syntax:

    content: ~ = "00-00-00 '.

    Use the name: ~ = "00-00-00' if it's parts of file names that you are looking.

    The symbol of the hyphen, as symbols of most special is not available without the use of syntax as ~ =, which means "corresponds to anywhere."

    [Update: apparently special search symbols such as ~ = do not work with the content when property indexed research places, but work during the search in unindexed locations.]

  • Too many clicks on any of the PPT Slides

    Hello

    I'm having a problem when you import PowerPoint slides in Captivate 5 (from PowerPoint 2003). Most of the slides are importing animations, transitions and text very well. However, a few slides have a problem with the number of clicks needed.

    On these blades instead of the user having to click once to see the first line of text, image, etc, click around five times before everything is displayed. Whenever the user clicks on, the playback in the .swf skin indicator momentarily changes to pause, indicating it is playing and then returns to play. This shows that the clicks are recording and the timeline progresses, but nothing happens.

    The original PowerPoint files do not require these extra clicks.

    I added navigation buttons to each slide, but I put to not pause playback until the user clicks. I also have a box to click on 'continue' final on the slides that has been added by Captivate during the import. These work on 90% of the slides, but not issues.

    I had the same problem with a .flv video embedded. As a slide with the inserted video, it stops at about four different stages will fade before it has been made clear and video could be played correctly. I disabled the transition between slides (no longer discolor or fade in and out) and this fixed the problem with the video. Unfortunately turning off transitions has not worked with these other slides.

    I guess there is something in my editing that is causing this problem, but I don't see what it is. If anyone has any ideas I would like some advice,

    Thank you.

    I found a reasonable solution to this issue. It seems to be related to the PowerPoint slide. The problem arises when I delete the slide from the slide layout, and then it is imported into Captivate.

    To resolve this problem, I'll be back in the PowerPoint slide show and apply the layout of slide. I can update the blade as necessary and even leave a text box empty if necessary.

  • ORA-02045: too many local sessions involved in the overall transaction

    Hello
    It has to do with the solution I got from my previous in post

    change the column using the trigger

    This solution works in my local scheme. But when this test in the real application.
    I got above error.

    may I know what is the reason?

    Thank you

    You are most welcome ;)

  • Error message "too many redirects."

    I am running Windows 7, using the Chrome browser and have My Yahoo set as my homepage on my desk.  I can't access my Yahoo I get the error page "Web page a redirect loop" with message void "too many redirects."  I followed the instructions and deleted cookies, third-party cookies accepted and tried different browsers.  I can't access my Yahoo on other devices.

    Hello Janet,.

    Thanks for posting your query in Microsoft Community.

    Let me ask you;

    • The issue is specific to Google Chrome browser?
    • Are you facing any issues with Internet Explorer?

    If the problem is specific to Google Chrome, I recommend posting your query in the support forum of Google Chrome for the best possible response to your query.

    If you are having problems with Internet Explorer as well, please come back with answers to the following questions;

    • What is the version of Internet Explorer do you use?
    • What security software is installed on the computer?
    • When was the last time it was working fine?
    • Remember to no particular change in the computer before the show?

    If you are faced with questions as well using Internet Explorer, you can try the following methods and let us know the result.

    Method 1: I recommend that you clear your browser cache and temporary internet files to ensure that they are not causing your problem. Please delete your browser cookies by following the instructions.

    1. Open Internet Explorer, click the Start button. In the search box, and then type Internet Explorerin the list of results, click on Internet Explorer.

    1. Select Tools (via the gear icon) > Security > delete history....
    1. Be sure to uncheck the favorite preserve Web site data and check the Temporary Internet files and Cookies , and then click Remove.

    2. Once it has cleared your cache and cookies successfully, you will receive a confirmation at the bottom of the window.

    If the problem persists, try Method 2.

    Method 2: I suggest that you follow the steps in the article given below and check.

    Can't access some Web sites in Internet Explorer

    Note: The steps described in the article for Internet Explorer 10 for Windows 7 also applies to IE 11 for Windows 7.

    Important: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • Too many guests while launching a browser in a j2me on Blackberry 4.2.2 handset application

    Hi all

    I'm working on an application J2ME which starts a default browser and opens a Web page on the Blackberry handset.

    My Tools includes jde4.3 BB + Eclipse Europa + BB4.2.2 combined - 8820, 8310 (for the execution of the application).

    I use the following code and in the face of a problem during the race piece crushed this combined 4.2.2 BB app, say BB 8310 Curve:

    public void startApp() {}

    Boolean b;
    try {}
    b = platformRequest ("http://www.yahoo.com/");
    destroyApp (true);
    notifyDestroyed();
    }
    catch (ConnectionNotFoundException ex)
    {
    ex.printStackTrace ();
    }

    destroyApp (true);
    notifyDestroyed();
    }

    public void pauseApp() {}
    }

    {} public void destroyApp (boolean unconditional)
    }

    Why does always she asks too many questions/confirmations and launching too many pop ups before launching the browser.

    It asks questions like:

    (1.) you want to grant the status of trusted abc_app Application?

    (2.) the abc_app of the application tries to invoke the browser to display www.yahoo.com. You want to allow this?

    and so on...

    before you open the desired Web page.

    I want to be able to reach the webpage directly avoiding these guests of pop ups not necessary to display on my mobile screen. Help, please.

    Thanks in advance

    See this KB article

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800440/How_To _...

  • Too many?

    Hello, in my application I am multiplying extremely large numbers. The product of these numbers when converted to a string and displayed to the user are in one of these formats:

    #1

    201.16800 * 0.00000000000668458134 = 1.34472385900512e - 9

    #2

    999999999999999999 * 0,0254 * 0.00000000000668458134 =-0.0002524105470876466

    Either as #1, the product is in scientific notation, which is what I want, either as #2, she has a negative value. Why #2 have a negative value? I also use the Number type to store these numbers. Y at - it a type more best suited for more - since I know that a regular 32-bit integer would not be able to manage these figures. There must be a solution to this problem. At one point, the number would have too many digits to display to the user correctly which is why I want display in scientific notation as in the #1 example.

    Thanks in advance,

    Noah NAKED

    The number in Actionscript class uses the format double-precision 64-bit that is used to store the values of numbers between-9, 007, 199, 254, 740, 992 (-2 ^ 53) to 9,007,199,254,740,992 (2 ^ 53). Your first number # 2 is just to great to store in the number class, so that you get a positive overflow resulting in a negative endresult.

    Unfortunately, there is no datatype in ActionScript with a larger area I know.

    If all this sounds like gibberish to you, I suggest you read up on top of floating points. The use of these small and large numbers together is boobytrapped by several errors of calculation.

  • Scalability problems - too many Active Sessions?

    Hello

    I'm having a problem with an app that I built for one of the College campus, that I work. The application is a queue system where there are stations for students to access your room, admin stations where staff can see these students and "call", and displays outside every office employee that shows the student who was called. There are about 20 of the latter type of billboards. I have the following code in my footer to query the DB for most recent students called for a specific room:
    <script type="text/javascript">
    <!--
    var refresh_region = function( workstation_in, div_in ) {
        $.get(
            'wwv_flow.show', 
            {"p_request"      : 'APPLICATION_PROCESS=F_NEXT_STUDENT',
             "p_flow_id"      : $v('pFlowId'),      //app id
             "p_flow_step_id" : $v('pFlowStepId'),  //page id
             "p_instance"     : $v('pInstance'),    //session id
             "x01"            : workstation_in
            },
            function(data) {
                $(div_in).html(data);
            }
        );
        setTimeout(function() { refresh_region( workstation_in, div_in ) }, 5000);
    }
    
    refresh_region( '&P7_WORKSTATION_IN.', '#next_student_div' );
    //-->
    </script>
    The process of OnDemand, F_NEXT_STUDENT executes the query and returns the result:
    select a.FIRST_NAME || ' ' || a.LAST_NAME
    into   full_name
    from   ONESTOP_QUEUE a
    where  a.WORKSTATION_ID_CALLED = in_workstation_id
    and    a.STATUS = 'CALLED'
    and    a.QUEUE_ID = (
       select min( c.QUEUE_ID )
       from   ONESTOP_QUEUE c
       where  c.WORKSTATION_ID_CALLED = in_workstation_id
     and    c.STATUS = 'CALLED');
    However, when all these display panels is turned on (and I use the code as follows in the other pages for similar purposes) the application become slow and eventually unresponsive. As a first step, we have the application running a box with Oracle XE. Finally, we have migrated to a full blown installation 11g with APEX listener and GlassFish. My DBA said everything looks ok on the side of the DB, so I tried to dig into other areas to see where the bottleneck can be. After inspecting the report of Active Sessions in the APEX, I noticed that there are a ton of connections being generated (> 30 000). This is not a good thing for me and I try to understand what I am doing wrong.

    At first I used $. post() instead of $. get (). I was also using setInterval() instead of a setTimeout() loop. However, none of these changes really seem to help the situation. I am at a loss to know how else to improve the performance of this application. Any suggestions on what I can try?

    Most of the features of the app is on apex.oracle.com
    WORKSPACE: SCCC_TEST
    USER/PASS: TEST/test
    Direct URL to the page (I spend worksation ID): http://apex.oracle.com/pls/apex/f?p=65890:7:0:P7_WORKSTATION_IN:ADMISSIONS_1

    Thanks in advance for any help.

    Hello

    are you sure that each AJAX request generates a new APEX session? Because it is based on your downloaded app all right. You can check that by running the following query. It will also show you how long it took APEX to meet your demand for AJAX (elapsed_time). I think that the elapsed time will be the key to find out why your application becomes unresponsive if too many customers are returning. The goal should be that the AJAX request ends as soon as possible. For example 1 sec would be for many, because if you have 20 parallel AJAX requests at the same time, this could have an impact on your DB. You can share your average time?

    select apex_session_id, to_char(view_date, 'DD.MM.YYYY HH24:MI:SS') as view_date, elapsed_time, application_info
      from apex_workspace_activity_log
     where application_id = 65890
       and page_id = 7
       and view_date >= sysdate - 0.1
     order by 1, 2, 3
    

    I don't know how much data is stored in the ONESTOP_QUEUE table, but it may be useful to adjust your statement used in F_NEXT_STUDENT. On apex.oracle.com, the plan of the explain output shows at least he uses twice a scan interval on index ONESTOP_QUEUE_IDX. For inside MIN instruction it is well, but the external SQL should just do a search PK using QUEUE_ID. This is why I would like to delete

    a.WORKSTATION_ID_CALLED = in_workstation_id and a.STATUS = 'CALLED'
    

    to force the index seek PK using QUEUE_iD.

    I also suggest that you make your JavaScript code on the page 5 and 7 more transparent. He is currently hiding in the region or footer HTML. I would say to move JS code in the attributes of the page 'Function and Global Variable declaration' and ' run when Page Loads. BTW, there is no need to use $(document) .ready in "Run when the Page loads", because internally, we already use $(document) .ready.

    Or instead of using your own JavaScript code you can download the plugin http://www.oracle.com/technetwork/developer-tools/apex/application-express/apex-plug-ins-182042.html#dynamic "Timer" and use rather dynamic actions. On page 5 you can use the action "Refresh" to update your classic report and on page 7 you can use an action to "Set the value" to run your query. I think it would make your page easy to read for others.

    Concerning
    Patrick
    -----------
    My Blog: http://www.inside-oracle-apex.com
    APEX Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

Maybe you are looking for