Too many software - slow performance

Similar Questions

• FF slow loading, maybe because of too many that add ons. those who know turn off? Thank you.

  FF was loading very slow for me lately, and I think that may be too many Add ons, but I don't know which ones is necessary and those that are not. Thanks for any advice.

  This has happened

  Each time Firefox opened

  Is a few weeks ago.

  The images are of your plugins and you have only 13 of the images, but you have either deleted or disabled some of them as only 10 are in plug-ins installed at the bottom of your post. not a large number.

  What your extensions?

  There may be many reasons for any slow application at startup. Without more information, or to be in front of your system, it is difficult to diagnose. 2 suggestions below.

  Firefox Safe Mode
  You may need to use questions Troubleshoot Firefox in Safe Mode (click on "Safe Mode" and reading) to locate the problem. Firefox Safe mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, place you in the DEFAULT theme: Tools > Modules > Themes before start Safe Mode. When you enter Safe Mode, do not check all the items in the window, just click "continue mode without failure." A test to see if the problem you are experiencing is fixed.

  See:
  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  Solve problems with plugins like Flash or Java to solve the common problems of Firefox
  Troubleshoot and diagnose problems in Firefox

  If the problem does not occur in mode without failure, then disable all your Extensions and Plug-ins, and then try to find out who is causing by allowing both the problem reappears. You MUST close and restart Firefox after EACH change via file > restart Firefox (on Mac: Firefox > Quit). You can use 'Disable all add-ons' on the start safe mode window.

  Malware scan
  Install, update and run these programs in this order. They are provided free for personal use, but some have limited functionality in "free" mode, but those are features that you don't really need to find and eliminate the problem that you have. (Not all programs detect the malware even.)

  Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
  SuperAntispyware - http://www.superantispyware.com/
  AdAware - http://www.lavasoftusa.com/software/adaware/
  Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
  Windows Defender - http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
  Dr Web Cureit - http://www.freedrweb.com/cureit/

  If they can't find it or cannot delete it, post in one of these forums using specialized malware removal:
  http://bleepingcomputer.com
  http://www.spywareinfoforum.com/
  http://www.spywarewarrior.com/index.php
  http://Forum.aumha.org/

• Resolution of the problems of performance of MS said there are too many programs running at startup

  I ran MS performance problems resolution and it says I have too many programs running at startup.  Thank you for your help.

  * original title - can say it please, so I can understand, lol, exactly what programs are needed to startup.*

  Hi DjDenizeri,

  You can try to perform a clean boot and then turn on only the programs that you think you have need in the ultility system configuration:
  http://support.Microsoft.com/kb/929135
  I hope this helps.

• An error of Dimension to slow variation: too many values

  Hello
  Trying to implement using the CPCS? IKM dimension to slow variation on all columns with their descriptions
  
  but, when I execute the lines 8 old Historize interface, that it was not
  
  Error message:
  
  913: 42000: java.sql.SQLException: ORA-00913: too many values
  
  java.sql.SQLException: ORA-00913: too many values
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
  
  I have only on 93 records
  
  can someone help me on this?
  
  Thank you
  Saichand.v
  
  Published by: André Varanasi on October 4, 2010 16:26

  SAI,

  The query I've deduced the following:
  1. natural key is DATASOURCE_ID
  2. you have 2 columns marked as end IFL stamp - T.AUX_DATE2, T.AUX_DATE4
  3. you have 3 columns marked as IFL Start Timestamp - S.INS_EXP_DT, S.AUX_DATE1, S.AUX_DATE3

  Apart from the error you are getting, there is another error you get - not enough columns.
  >
  Set)
  T.FLAG
  ,
  T.AUX_DATE2,
  T.AUX_DATE4
  ) = (
  Select 0
  ,
  S.INS_EXP_DT,
  S.AUX_DATE1,
  S.AUX_DATE3
  André. ' ' I$ _WC_CAR_Test "S
  >
  You try to define 3 columns, while the select statement has 4 columns.
  And this is due to the fact that you have more columns marked as start date of the SCD and SCD End Date.
  I met this interesting scenario, I think that the KMs are built to handle only a single column to be marked as SCD Start Date and another a column to be marked as SCD End Date.
  And it is consistent with the definition of the Type 2 SCD.

  Now, the error you get currently - as you have mentioned earlier that your Datasource_id is constant = 1. So, you have a natural key which is always 1 for all 93 records!
  Don't you think that it is good natural key?

• Dumprep.exe causes slow performance

  Anyone have any suggestions on how to fix Dumprep.exe causing the slow performance?

  My XP is slow recently.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  It's the dump reporting tool and it runs when some program/process causes an error in the system. Therefore, you should know what that the root of the error and fix it. Since you told us nothing about your computer and its recent history, here is general information on troubleshooting a slow computer:

  Some reasons for the slow pace of the computer:

  1. computer has not been maintained - http://www.elephantboycomputers.com/page2.html#Maintenance

  2. the computer is infected with the malware - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  3. the disk is too full. Remove useless stuff, uninstall unused programs. Do not forget to save!
  http://www.elephantboycomputers.com/page2.html#Backing_Up

  4. flaky third party software. Toolbars and modules are particularly guilty in this area. Uninstall toolbars (Google, Yahoo, ISP brand, etc) and look at what modules are in use in your browser (s).

  5. computer has too many unnecessary programs/processes running in the background. Manage your Startup:

  For XP - How to troubleshoot using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  For Vista/Windows7 - Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '. Autoruns is also very useful.

  6. the user runs an inflated/invasive such as Norton and McAfee antivirus program. Replace it with a better program. I recommend NOD32 (commercial) or Avast (free). Avira is also good, but the free version has an unpleasant reminder screen (Google for instructions on how to disable it). The user can also run several real-time antivirus/firewall/security programs.

  7. the user has installed new programs that are processor and/or memory-intensive (Photoshop, AutoCAD, Mathmatica or similar) and does not have the power of the equipment.

  8 drive fails and is in PIO Mode (IDE only - not applicable for disks SATA drives). It's very much slow (like being in 1985). See Hans-Georg Michna here information -http://winhlp.com/?q=node/10

  If the hotfix registry PIO only 'glue' (or you have a SATA drive), the drive is probably faulty and needs to be tested.
  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  In addition to the above, see also http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html

  MS - MVP - Elephant Boy computers - don't panic!

• Too many problems with the latest version of Lightroom

  Hi all

  I have too many problems with the latest version of Lightroom (CC 2015.2.1 1046594)

  In fact, the latest version of 3 or 4 were bad: instead of doing better, I always had more problems.

  So I would like to go back to a previous version of lightroom

  Adobe customar care, in Italy, is unnecessary:

  they can just to:

  -looking for answer on this forum

  -saying "you solve your problems just with the de-insall and re-install it.

  stop, no more...

  in this way they create me a lot fo iusses...

  I use the English version of the PS and LR, but they made me reinstall the Italian version of CC because it has been blocked

  the result was that CC does not recognize software, due to a different language version

  so, I contacted again Adobe Customer Care... they said "no problem, uninstall LR, delete these files and install this...

  I did and I let go 2 years to develop the parameters on the correction of the colors for my clients because they told me to remove a folder, I need!

  so, I ask you now if there is a way to return to a previous version of lightroom, any previous version...

  I never found better performance in more recent versions...

  I've always found, performance slower, more problems...

  personal idea: I do not understand why adobe are boicotting itself, but I think he do!

  Thanks to you all

  Hi ramontillo,

  6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available

  Concerning

  Pete

• Qosmio G30-126 (PQG32E) - very slow performance of HARD drive

  I have improved my Qosmio G30 126 at 4 GB of Ram, SSD 64 HDD as windows7 boot partition and 500 GB 7200 64cache HARD drive as drive HARD secondary but I have a very slow HARD drive performance when working in windows7, but when I work on a virtual machine Windows XP, the disk HARD perforemance is fine.

  I've upgraded all drivers from toshiba.com for windows7 ultimate 32-bit drivers including drivers from the chipset intel but my problem is not solved. I also check all other performance issues and its OK.

  The same problem exsists on my old HARD drive on Windows Vista Ultimate 32-bit and Windows 7 ultimate 32 bit.

  I used HD tune software to check my HARD drive it accelerates gives about 100bps in windows 7 for my SSD and it gives 285mbps (this is the actual read speed) in the machine virtual Windows XP and the actual speed is significantly different.

  Please tell me what to do because I suffer from my laptop very slow and spend a lot of mony on it without more.

  Hello

  To be honest it is really hard to tell why you have slow HARD drive performance but especially it s associated with a large number of programs they are running in the background. How many processes are started after Windows starts?

  Also, the antivirus program may affect the performance of the computer. I would recommend using the AntiVir freeware tool and the Windows Firewall. That's enough if keep you Windows up-to-date and use a new Internet browser.

  Also check the other discussions of the forum on the slow performance. You can find a lot of useful tips to improve performance. For example:
  -Defragment HARD drive
  -Disable the startup programs you don't need
  -Uninstall unnecessary programs
  -Run the CCleaner tool to remove old registry keys

• High CPU use/Slow Performance after you install the updates of Windows

  I run Vista Business 32-bit.

  After you install many Windows updates in the last few days, I've known very slow performance after the system worked for a while. Resource monitor shows 70-100% CPU usage, even when you run all the apps (that I know of). This makes everyhting grind to a halt, same trip that the mouse jerky movements. I ran several complete system with McAfee anti virus scans and not found problems (using the latest software). The detail showed the so-called ", PID4 NT kernel and system" using 18% avialable CPU capacity, but this process is not always shown to use much more capacity when the slow performance occurs. Nothing else don't use much capacity CPU, I see.

  More recently, the capacity of the CPU became crazy, jumping from zero to 100% usage in a back a suite oscillation. When I shut down and restart, performance improves, but erodes little by little over time.

  Is this a sign of a virus, or is it a problem with the recent Windows updates or some kind of conflict with my software such as McAfee? How do I tell me what to do? Anyone else have this problem with the recent Windows updates?

  Help!  Thank you!!

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. now run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NOTE: Step #2 McAfee fix run the removal tool, you have already downloaded in my step #1 above.

  4 IMPORTANT! => After the reinstallation of the McAfee application (step #3 of the McAfee fix), manually & repeatedly updated the McAfee application, until you get a prompt "no update more".

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  6. OPTIONAL: For good measure, pen also Internet Explore (only) to http://support.microsoft.com/kb/971058 & race that secure it in DEFAULT and modes and AGGRESSIVE. [1]

  7 restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Too many running processes?

  While playing a game online (Aces High), the program stops working and I am getting an Aces High EXE.

  When you talk with their tech support they said I have too many processes running during the game. I looked into the Task Manager and it says I have 64 of them running. Aces High-tech support said I should about 35 processes running and maybe I could eliminate some of them. They also said that I should reduce the detail of the screen of the game a little.
  I use my pc for a game online and email and occasional printing. Should I have that a lot of process?

  I tried to find out what processes are for and I really can't understand them. So I don't know what to delete. What can I do to improve the performance of the machine without having to resort to the put in new RAM or something like that?
  It is only a year that the system specifications are as follows:
  HP model a6755y
  9550 Quad Core 2.2 Ghz AMD processor
  6.0 GB OF RAM
  Vista 64-bit system

  I thought that my system would be more than capable to run this game online with no problems.

  Can anyone help?

  Hello

  Yes, your system must be running that game however, there may be other reasons that he has trouble,
  including incorrect programming of their own. The tech you suport contacted had no idea regarding
  the real question.

  Have you tried running the 32-bit browser?

  See this site
  http://pietschsoft.com/post/2006/12/Vista-experience-update-Windows-Vista-x64-runs-32-bit-Internet-Explorer-by-default.aspx

  Internet Explorer 32-bit = C:\Program Files (x 86) \Internet Explorer\iexplore.exe

  Internet Explorer 64-bit = C:\Program may Explorer\iexplore.exe

  ====================================================

  These could help: (for browsers of 32 and 64-bit)

  Maybe something is blocking.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• too many programs in startup

  Im searching on why I have too many startup programs with my PC.  I understand 3rd party programs may start with my startup.  Im going to watch the video on how to determine what I can disable.  I understand that I must load the tool down.   is this tool save for down load?

  "Too much of" programs start when your computer starts all first is not really the right way to see things.  What you need to do is to decide what programs you need and that you do not.

  If you are concerned about 'slow' start, the usual culprits are programs that perform some sort of scan of your computer--which is what takes the time.  These are programs that you really want to keep, such as your antivirus and Windows Update program.  Some antivirus programs are more effective that others insofar as of the start of the scans are involved.

  Many programs can be prevented from boot to start Windows using the menu 'options' of the program and by unchecking an item that says something like "Start Skype" when I start Windows (obviously for Skype).

  Another thing to do is to click on the Start button, then all programs, then start.  The contents of the startup folder is shortcuts to programs.  If you don't want a program to start, simply delete the shortcut from the startup folder (this will NOT remove the program, you can always start it either from a computer point or its own entry in the start menu > list all programs).

  There are other methods that some programs use to automatically start, and that's why 'startup manager' utilities exist.  Some of them (e.g., Autoruns) should be used with caution, so that you do not disable something that should really be started (even if you don't think to do this).

  That your specific question, we have no way of knowing which video that you watch or what tool you are referring.  If you want advice on something like that, please provide the URL (web address) you are watching.

• Too many activations on CS3 Web Premium Suite

  Hello

  I have a serial number for CS3 Web Premium as a result won in a contest some time ago. But when I try to activate my installation, I get a "too many activations" error. How can I solve this problem and continue to use my product?

  Thank you for your time.

  Hi Liviucmg,

  Adobe allows two simultaneous activations of CS3, so if the software has been installed and enabled on both computers before, you will need to disable one or both of them to perform a new installation. On the old computer, start a CS3 application. From the Help menu choose Help > Deactivate > permanently disable: Learn how to enable or disable Adobe applications.

  If you do not have access to old computers to disable, you will need to contact customer service via chat and ask them to reset your activations. Cat representatives are unable to technical troubleshooting for older products like CS3, but they can help with licensing and activation. FYI, Adobe have reset your activations will delete the information about the licenses of all your computers, so you'll need to reactivate the computers currently in use.

  For more information, please visit: "Activation limit reached" or "connection error impossible ' with Adobe applications. Let us know if you have any additional questions.

  Best,

  Del

• CS6 TOO MANY ATTEMPTS

  My CS6 was super slow to download, so I left and download again several times. Now, he refused my access to "too many attempts." What should I do? Thank you!!

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• Scalability problems - too many Active Sessions?

  Hello
  
  I'm having a problem with an app that I built for one of the College campus, that I work. The application is a queue system where there are stations for students to access your room, admin stations where staff can see these students and "call", and displays outside every office employee that shows the student who was called. There are about 20 of the latter type of billboards. I have the following code in my footer to query the DB for most recent students called for a specific room:

  <script type="text/javascript">
  <!--
  var refresh_region = function( workstation_in, div_in ) {
      $.get(
          'wwv_flow.show', 
          {"p_request"      : 'APPLICATION_PROCESS=F_NEXT_STUDENT',
           "p_flow_id"      : $v('pFlowId'),      //app id
           "p_flow_step_id" : $v('pFlowStepId'),  //page id
           "p_instance"     : $v('pInstance'),    //session id
           "x01"            : workstation_in
          },
          function(data) {
              $(div_in).html(data);
          }
      );
      setTimeout(function() { refresh_region( workstation_in, div_in ) }, 5000);
  }
  
  refresh_region( '&P7_WORKSTATION_IN.', '#next_student_div' );
  //-->
  </script>

  The process of OnDemand, F_NEXT_STUDENT executes the query and returns the result:

  select a.FIRST_NAME || ' ' || a.LAST_NAME
  into   full_name
  from   ONESTOP_QUEUE a
  where  a.WORKSTATION_ID_CALLED = in_workstation_id
  and    a.STATUS = 'CALLED'
  and    a.QUEUE_ID = (
     select min( c.QUEUE_ID )
     from   ONESTOP_QUEUE c
     where  c.WORKSTATION_ID_CALLED = in_workstation_id
   and    c.STATUS = 'CALLED');

  However, when all these display panels is turned on (and I use the code as follows in the other pages for similar purposes) the application become slow and eventually unresponsive. As a first step, we have the application running a box with Oracle XE. Finally, we have migrated to a full blown installation 11g with APEX listener and GlassFish. My DBA said everything looks ok on the side of the DB, so I tried to dig into other areas to see where the bottleneck can be. After inspecting the report of Active Sessions in the APEX, I noticed that there are a ton of connections being generated (> 30 000). This is not a good thing for me and I try to understand what I am doing wrong.
  
  At first I used $. post() instead of $. get (). I was also using setInterval() instead of a setTimeout() loop. However, none of these changes really seem to help the situation. I am at a loss to know how else to improve the performance of this application. Any suggestions on what I can try?
  
  Most of the features of the app is on apex.oracle.com
  WORKSPACE: SCCC_TEST
  USER/PASS: TEST/test
  Direct URL to the page (I spend worksation ID): http://apex.oracle.com/pls/apex/f?p=65890:7:0:P7_WORKSTATION_IN:ADMISSIONS_1
  
  Thanks in advance for any help.

  Hello

  are you sure that each AJAX request generates a new APEX session? Because it is based on your downloaded app all right. You can check that by running the following query. It will also show you how long it took APEX to meet your demand for AJAX (elapsed_time). I think that the elapsed time will be the key to find out why your application becomes unresponsive if too many customers are returning. The goal should be that the AJAX request ends as soon as possible. For example 1 sec would be for many, because if you have 20 parallel AJAX requests at the same time, this could have an impact on your DB. You can share your average time?

  select apex_session_id, to_char(view_date, 'DD.MM.YYYY HH24:MI:SS') as view_date, elapsed_time, application_info
    from apex_workspace_activity_log
   where application_id = 65890
     and page_id = 7
     and view_date >= sysdate - 0.1
   order by 1, 2, 3
  

  I don't know how much data is stored in the ONESTOP_QUEUE table, but it may be useful to adjust your statement used in F_NEXT_STUDENT. On apex.oracle.com, the plan of the explain output shows at least he uses twice a scan interval on index ONESTOP_QUEUE_IDX. For inside MIN instruction it is well, but the external SQL should just do a search PK using QUEUE_ID. This is why I would like to delete

  a.WORKSTATION_ID_CALLED = in_workstation_id and a.STATUS = 'CALLED'
  

  to force the index seek PK using QUEUE_iD.

  I also suggest that you make your JavaScript code on the page 5 and 7 more transparent. He is currently hiding in the region or footer HTML. I would say to move JS code in the attributes of the page 'Function and Global Variable declaration' and ' run when Page Loads. BTW, there is no need to use $(document) .ready in "Run when the Page loads", because internally, we already use $(document) .ready.

  Or instead of using your own JavaScript code you can download the plugin http://www.oracle.com/technetwork/developer-tools/apex/application-express/apex-plug-ins-182042.html#dynamic "Timer" and use rather dynamic actions. On page 5 you can use the action "Refresh" to update your classic report and on page 7 you can use an action to "Set the value" to run your query. I think it would make your page easy to read for others.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Very, very slow performance

  The performance of Lightroom on my computer became, at times, horribly slow.  My iMac is rebooted and do not open any other programs or browsers, it just took about eight minutes to import the 23 files and a few more minutes to build 1:1 previews.  When things work very well that it may take a minute.  (I always build 1:1 on import previews and it comes up with the recently imported as well as the older files, is not a matter of having to build previews on the fly).  I have had extremely slow performance ("Loading") just go from one photo to another in the library modules and develop or move from one module to another, usually up to about 90 seconds, or when LR "prepare the file" for export or edit in PS.  But not always - sometimes it is quite zippy - and there is no pattern that I can see.  Generally when this happens, 'pressure' of the memory and the processor are normal, but it happens when its use is minimal as well.  Sometimes, there is a ball rotation range, but are generally not.

  My catalog has about 30 k pictures and very few presets of any kind.  Probably 75% of these records were never published at all.  I do not hundreds of local equalization, rarely more than a decade in an image.  I have about 40 smart Collections with an average of several hundred images each.  I rarely use intelligent previews.  I optimize and save the catalog each time that I use LR, which is a few times a week.  My file/folder structure is simple and clean: / Pictures/year/day.

  I use LR 5.4 on an iMac mid-2011, 3.4 GHz Intel Core i7 with 16 GB of memory.  I have the Lightroom Catalog and previews on the primary drive, which is a 250 GB SSD with about 100 GB free.  (The problem happened when my catalog was the different internal disk, too).  My Pictures folder is on an internal hard drive with 100 GB available.  I have set to 50GB maximum cache size.  I'm running the Mavericks but it was just too slow under Mountain Lion.  It was just as slow in the previous Lightroom, major and minor versions.  Other programs/applications run fine on my computer, including Photoshop.  (Generally, LR performance is the same whether the PS is running.)  The only problem with performance, I noticed since switching to the Mavericks is Finder to hold for a few seconds each time than in quite awhile.

  I've seen this problem in Lightroom called on various forums, including the Adobe forums for some time - years - and I've never seen a definitive solution.  I think that I have answered all the questions that are commonly asked.  Is there a solution to this?  I use LR 30-40 hours per week.  I am pulling my hair and the ability to switch to another program would be the last resort, but I might have to do.

  I appreciate the suggestions.  I tried to use a new catalog with only a couple hundred pictures and the same thing happens.  I'm sure that my ssd is very good because Photoshop and many other applications use without delays.  However, so far I have never had these problems on my Macbook, which runs also Maverick, so I start to wonder if it is largely a problem with my iMac.

• error "too many files".

  None of the suggestions I found helped to eliminate this error so that I can add at least an icon in my conduct of flow using AW7.0.  I 8791 icons (reduced from more than 9000 by simplifying my subroutines) and 43 variables.  This seems little that I've reached a limit and nowhere I can find no explanation as to what is the limit of files.  I can't find the reference of .rec files in a response from aid, or one of the several books that I have on using Authorware address this issue.  I even tried uninstalling and reinstalling the software think that it have been damaged in some way - didn't help.  Short to split the file into two parts (I already did once), can someone tell me how absolute and definitive of how to remove this error so that I can add more icons to the conduct of flow?  It's very frustrating to say the least.  Is there a kind of memory hidden in Authorware that must be eliminated somehow?  Thank you.

  Disk Manager is a component that manages the folder file and the source file. Too many folders can sometimes be erased using the file / save and Compact because records that has been used and then discarded are not removed from the file with each record. He used to do this but saved was too slow so disk manager has been changed so that it only saved changes and Save and Compact has been added.

  If save and compact it fixes so you can watch the number and size of the media internalized. The media will be broken into pieces, and each piece will seize a record. So if you have very large files that are internalised you can save some recordings using this external media. If outsource you some media you should save and compact since the records used by the media where it was made in-House will not free up the save and compact is made.

  HTH,

  Mike