Tools 8.50 start YOU and PS

Similar Questions

• PC Tools Performance Toolkit, removed from the list of programs recently used in the Start Menu and a new one is born not more

  I used the destructor of the demo feature PC Tools Performance Toolkit allows you to delete a directory that I couldn't take off any other way. At the same time used a few other functionlities software to clean my computer, the software promised to improve the performance of my computer (Vista). Then I discovered that the software deleted the list of programs recently used in the start which was not desirable. Now there is a list of recently used programs, and a new one is created either. How can I get the list to create again?

  Hello

  It is not recommended to use any cleaners/tune Up all registry program on modern operating systems.

  And they can do more harm to your any good operating system that they claim to be able to do.

  See if that helps you.

  Do a system restore, if necessary using the safe, before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Or follow this path:

  "Use the System File Checker tool to fix the files of system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

  If SFC is erors that it cannot repair, you may need to do a repair upgrade installation.

  But, to a Microsoft Vista DVD, not the valorization of the disc manufacturer.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• HI.when I turn on my computer I can't see Start menu and other icon... except top bar.help me please.many thank you

  HI.when I turn on my computer I can't see Start menu and other icon... except top bar.help me please.many thank you

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Start Menu and the desktop icons for HP printer Diagnostic tools

  Hello world

  I have a HP Desktop F4440 all-in-one printer and I use the Windows XP operating system. I have all the scanning software and others installed from the original HP installation disk or updates from the HP Web site for this printer. Everything works very well at the moment, but there is a small problem. The HP icon shortcuts for the Menu start-up and functions for the printer changed to a generic icon at a time given to these two places after the software installation CD was used by me to install the printer programs or desktop icon HP to utilities "Diagnostic Tools HP printer" original. It works fine otherwise, when I want to go check something on the Tools of diagnosis HP printer or HP Solution Center, but the HP icon changed to a generic at a time for a reason unknown, inexplicable. I don't have no changes to my system until the problem occurred to my knowledge other casual upgrade for the operating system or install a new windows update or HP software updates or restart the computer, but some schooner point after one of these upgrades, HP put to date or restart the HP start menu and desktop icons time replaced by a generic.

  Can someone tell me how I can recover the original HP icon and get her back Amendment? It was an icon on the web since the HP printer Diagnostics utility or function is based on the web. Is there a way I can save a copy of just the file on my computer icon so that if it goes back to that generic again once I can more easily change what it is supposed to be? I thank very you much for your help and advice.

  Hi there yoseph13,

  What has happened to me too, but after a windows update. Half the icons on my desktop have been affected. I hope that this fix works for you as well. Right-click on the icon. Go to properties. Click Change icon. Select the icon and click ok then apply and ok again. If the icon does not appear, you will need to navigate to the folder of the software and select the application.

  Good luck!

• crop tool missing, reason why you have a tutorial to help me use the crop tool, and there is no crop tool?

  So, where's the crop tool?  Nowhere to be seen.  And you still have a tutorial that says to use the crop tool, but if the obsolete tutorials, then why you always the same tutorial?

  
  

  This tutorial - How to use Photoshop like a photo editor | Tutorials Photoshop Adobe CC - -9174 https://images-tv.adobe.com/avp/vr/ebed59ee-4453-4fbb-b9a9-e3f690f4772f/3e32511b-295c-4ca5-cc6d5cb4e8e9/d40f3d6e-6 a...
  

  Here's a preview of my new Photo shop, I uploaded 4 days ago, it's your last version... look around, there's No crop tool.

  

  lamptree wrote:

  No, Pierre, already tried and did not work.  However later

  I found it and it works:

  From the top to the left, press 'Edit' - 'Toolbar' - 'Restore Defaults' - and 'Done '.   This will reset all the tools at the appropriate position and the  "crop tool" re - appears where it is supposed to and the   "corrector".

  Yes.  It's exactly what I told you in the _identical_ of _other_ thread that you started with this question.  It's just one of the reasons why it isn't a good idea to start multiple threads.  I locked this thread, but one of the other moderators of the forum has been deleted.

• Windows cannot find C:\WINDOWS\system32\rundll.exe. Make sure you typed the name correstly and then try again. To search for a file check the Start button and then click search.

  I tried to launch my Spysweeper and found that is not there, then I re downloaded and I could not install it because it was already on my computer.  I went to the control panel to remove and got the message:

  Windows cannot find C:\WINDOWS\system32\rundll32.exe.  Make sure you typed the name correctly and then try again.  To search for a file, select the Start button and then check the search...

  What should I do?

  Hi gsrow,

  You can go there!

  Cannot find the Rundll32.exe file when you open the control panel:
  http://support.Microsoft.com/kb/812340

  Alternatively, copy the folder C:\Windows\System32\DllCache Rundll32.exe file to the System32 folder. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• The computer starts you see all the individual command windows and they stack up and take the time to load and to hide.

  Why command windows appear indeed when the computer is started?

  Hello

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How do you computer when you start upwards and stops

  How do you computer when you start upwards and stops?

  Hello

  1. You use any meaningful application in your system?
  2. Are you facing any problem sound in the computer or speaker?
  3. To better help you, let me know the brief description of the problem.
  4. Do you get audio startup in Windows?

  If you are facing problems of sound in the computer, see the link below:

  The startup sound is not played correctly when you start Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/321735

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-sound-problems

  It will be useful.

• When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

  When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

  Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

• I had the literoom last Sunday. but did not the program. When I start this program. "Please disconnect in the menu help reconnect you, and then click license of this software.

  I had the literoom last Sunday. but did not the program. When I start this program. "Please disconnect in the menu help reconnect you, and then click this software license" How can I do?

  Hello

  I see that you bought the subscription of photography and it seems it is stuck in the sign in a loop.

  Please try out the following links

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Solve the common activation Adobe Creative Cloud (login) and questions (disconnect) disabling or error messages

  Troubleshooting of Activation creative cloud (solved 99% of the questions)

• How do you start "help and support" everytime I try the? Mark my computer says to start the program

  I must have deleted at one time or another, I have re-installed my updated windows program in place the disc but it says to start the program, how can I do this?

  Hello

  ·         What is the exact error message?

  To solve this problem follow these steps:

  (a) click the Start, run menu. In the Run menu box type in:-services.msc and click OK or press the Enter key.

  (b) in the Services (Local) window scroll up to the help and Support and double-click it.

  (c) change type start Automatic and service status "Start."

  (d) click OK/apply.

  See also:

   

  Menu help and bootable media will not open

  http://support.Microsoft.com/kb/555329

  I hope this helps.

• When I go to tools-> account settings, Thunderbird freezes and simply emits a sound without action, when I click anywhere in the application.

  I can't access my account settings. When I try to access account settings by navigation in tools-> account settings, TB freezes and simply emits a sound from there to the front when I click anywhere in the application. I have to close TB via the Task Manager and reopen it. Enjoyed every appeal. Thank you

  What happens in safe mode? Hold down the SHIFT key while you start Thunderbird.

• Hi, I do not know where to turn: the person who takes care of all the stuff of count is out of town, this friend started Firefox and there was a message about an update, I thoght I again just click on install and wait to re start Firefox. But what I remem

  Hi, I do not know where to turn: the person who takes care of all the stuff of count is out of town, this friend started Firefox and there was a message about an update, I thoght I again just click on install and wait to re start Firefox. But what I remember is this another open window and asked me to choose 'something' (an icon or banner or?), I thought I have to click on an element (I guess I should read all clearly). Firefox updated to 3.6.4, but it also inserted some sort of what might be called a banner? But it does cover only partially the half right of my 3 toolbars at the top of the Firefox window. It cannot be used to something else because it's just a mess of colors and unknowns, except for what looks like a 'top' and what I recognize as an icon of Firefox (but only partially visible)! Now, what he does, it's partly hide this part all the toolbars and they are difficult to read and to do to turn this 'thing' impossible to understand, if I keep to? I can't find in any case to remove it or use it? But since the icon of Firefox is about it, I think you need to know what it is and how trash. I'm sorry for this accident caused my my inattention, but I'm not much of a computer person - HELP! Thanks for any help. Judi

  This has happened

  Each time Firefox opened

  Today is Thrsday June 24, 2010

  The only thing I can imagine: it's a character.

  Tools-> Add-ons-> Themes
  Here should be the character (light theme)
  and a button 'delete '.

  Click on it (delete button), and he (Persona, this mixture of colors) should disappear instantly.

  This help you?

• Satellite A200/A205 - problems with start-up and sleep modus

  I have a problem with my Toshiba (running on Windows Vista).

  When I start the computer, sometimes it starts normally. But often, it starts to beep, I can hear the fan start fan and lights up blue. But the system unbootable and I see only a black screen. When I turn off and try again, the ringtone happen or it starts normally. Sometimes I have to turn it on three times and sometimes it starts the first time.

  The other problem is when my laptop into sleep mode. Sometimes when I push to the bottom of the screen, but also when it rises. It turns into sleep normally, but it won't come out. I see only a black screen. I always turn it off and restart.

  I don't know much about computer and computer-language programs, but I really hope someone can tell me what to do. I bought recently and I can't work with it like I want to.

  Hello

  This code beep at startup always means there's a bad material work so I think that there is not much you can do.
  The problem could be related to everything, RAM, card graph, processor, motherboard, etc. and it is not easy to diagnose it exactly.

  What you can do is to test the RAM with Memtest86 or other memory diagnostics tool. Maybe he can find something

  If this isn't the case, I recommend you contact an authorized service provider. Guys can you help solve this problem. :)

• Cannot start Help and support

  Title: vista help and support will not start. message from the Red Cross directs me to this site, but none of the suggestions work. Come on get your fingers out microsoft and solve my problem

  vista help and support will not start. box comes with red cross and a link to the microsoft support. None of the solutions presented work. pressing F1 does not work and I can't find help and I support anywhere on the system. even downloaded winhlp32.exe with no result. solution please.

  Hello

  -What is the exact error message / complete you receive?
  -You are aware of any changes made on the computer before this problem?
   
  Method 1: To resolve this issue, start the Help and Support Center service and set it to automatic. To do this, follow the steps mentioned below:
  (a) click Start, run and type Services.msc.
  (b) double click on in Help and Support.
  (c) to set the Startup type on automatic.
  (d) start the Service.
   
  Method 2: (SFC) System File Checker

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  (a) click Startand type cmd in the box start the search.

  (b) right click on cmd in the programs list and then click run as administrator.

  If you are prompted for an administrator password or confirmation, type your password or click on continue

  (c) for the command prompts, the following line and press ENTER:

  sfc/scannow

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?

  http://support.Microsoft.com/kb/929833

   
  Method 3: Follow the steps from the link below and check if the problem persists.
  I can't open the help that was created in Windows Help format (WinHlp32.exe)
  http://support.Microsoft.com/kb/917607
   
  Hope this information helps.