Tools hardware Diagnosticn start

Similar Questions

• short Smart self-test in tools hardware every time diagonestic is down and display alert (s5398d)

  show and short smart as self-test in tools hardware diagonestic every time is not the attention that my pc is model pavilion s5398d

  Looks like you have a bad hard drive. You will need to have the hard drive replaced and reload the operating system using HP recovery support.

• Displacement of vCenter Server to new hardware and start from scratch

  Hi all

  I want to configure a new server vCenter Server on new hardware and start from scratch instead of migrating from the old installation.

  Threre are currently only 5 ESXi hosts connected to this server vCenter Server, so it would not so much be working to the reconfiguration of the new facility.

  I wonder if there are other things that I have to take care of? How about iSCSI, network settings and so on?

  Thanks in advance,

  Andreas

  It is no big problem with a new server vCenter Server. Just follow the step to a new clean install.

  Existing hosts will be simple automatically deleted when you add to the existing VC they to the new cluster.

  Please keep in mind that the DNS entry are correct.

  If you have a HA, so I suggest to disable in the old cluster (it will be configured in a way to the new).

  If you have CVS you add hosts when are in maintenance mode.

  André

• Diagnostic tool hardware problems on Satellite has detected memory

  Diagnostic tool memory detected in my laptop hardware problems. Now I don't know what part of the hardware's fault.

  Whenever I start my laptop after shoutting it down for some time, it appears failed early and repair takes place and start using the system restore that will come back at some point.

  Is that what this has to do anything with overheating?
  Please help me immediately

  > Diagnostic memory tool detected hardware problems in my laptop. Now I don't know what part of the hardware's fault.

  I would assume memory one or two failures of modules.
  I recommend you to check them both.

  Remove a module and try to use the laptop with a connected module.
  Then another module test. Make it as different memory locations.

  If two modules are corrupt, then you will need to replace both.

• Tecra T9000: Hardware malfunction start-up

  NMI: CHANNEL CHECK / IOCHK message

  When starting my laptop, a TECRA T9000 I had problems with the message... * Hardware malfunction * NMI: CHANNEL CHECK/IOCHK this system stopped *.

  I had the hard drive changed and again I got this message once more, it starts later because there for me to write this, but if you can help me identify the problem please!

  Hello

  Windows can display only basic error messages in case of malfunctioning of the equipment, troubleshooting can be difficult. Most Centre of problems of equipment around the motherboard, the RAM on a motherboard or on an adapter, or memory cache on a motherboard or adapter.
  Well, it would be very interesting to know that you have changed material. In addition it is possible that you have improved the unit with the device is not compatible.

  Good bye

• Upgrade VMware Tools-hardware virtual FOV 7.0 Build 130927.1406

  Hello

  I tried to update the version of VMware FOV tools, but all that seemed to do is strip out...  Any ideas on how to retrieve and update, including the virtual hardware version also?

  Thank you very much.

  Alex.

  Hi Alex,

  Installation of the tools is a feature of vCenter and VMware would better understand if there is a problem with the installation.  Their support may be able to help solve the problem you are experiencing.

  That being said, I would like to offer assistance if I can.  I installed VMware tools in the same way that you have described.  In the past, if I had a problem installing, vCenter would let know me the reason why.  It would also seem that if tools have been "stripped" of the existing virtual machine.

  I suspect that something similar is happening in your environment.

  I can't be sure this link applies, but we found this VMware.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1001354

  VMware support should be able to help you further with the installation of the tools. Unfortunately, because it is not our product, I can only offer advice on how to solve the problem with the installation of the tools.

  Bill

• VMware tools does not start on the comments

  I would be recognizing a few tracks on this problem, the VMTools won't start;

  The server VM/host: Linux 2.6.18 - 92.1.22.el5PAE #1 SMP i686 i686 i386

  Comments: Linux 2.6.18 - 92.1.22.el5PAE #1 SMP i686 i686 i386

  Anything not appearing in the newspapers when I try to start the services;

  status of /etc/init.d/VMware-Tools

  VMware-guestd is not running

  /etc/init.d/VMware-tools start

  Checking connection to hot acpi OK

  Starting VMware Tools services on the host:

  Switching to host config: OK

  status of /etc/init.d/VMware-Tools

  Mike

  Before running VMware Tools for the first time, you must

  Configure it to your kernel running on the

  following command: "/ usr/bin/vmware-config-tools.pl".

  Config tools... He'll try to compile tools for your kernel, make sure you have the kernel and GCC installed headers.  If the compilation fails, there should be a build any - any for the "vmware tools" somewhere on this site...

• Tools 8.50 start YOU and PS

  Hello
  in tools 8.50 this psntsrv.cfg file seems to have a different name. You know it?
  In the old version it ballasts to declare AS and PS as services to start at boot time.
  
  Thank you.

  I was referring to the Peopletools installation guide, it seems that it is a mistake, that the file is pswinsrv.cfg under % PS_CFG_HOME%\appserv.
  You can change the file via the menu of psadmin:
  -> the Service 4 installation option
  Then
  -> option file Configuration of service edition 4

  Nicolas.

• where 'tools' in the start menu screen of firefox?

  try to find a solution to allow the opening of the docs with adobe reader

  See the image for the button Option/tool

  to learn more

  • https://support.Mozilla.org/en-us/KB/display-Firefox-button-menu-instead-menu-toolbar

• Could not find my system tools in the Start - Menu accessories XP

  When I go to start - programs - accessories, all it shows is Internet Explorer.  I am running XP Media Center on an HP PC.

  I had a few problems of virus or Trojan which appear to be mostly fixed, except that for the last two days, I can't do a Google search.   When I click on 'Search' IE takes back me to my homepage to google.  I wanted to do a scandisk and Defrag, but I can't find the programs, even through a search.

  Hi TerryHill,

  ·         Are you having the same problem in Safe Mode?

  ·         What web browser do you use?

  Try these steps and see if it helps:

  Step 1:

  Run antivirus on the computer analysis to make sure that the computer is free of viruses/malwares:

  Microsoft safety scanner

  Step 2:

  Try the steps from the following link for the Google redirection problem in Internet Explorer:

  Difficulty of your web browser hijacked

  I hope this helps.

• need of the cutting tool for windows 7 starter edition

  does anyone know if you can download or purchase the cutting tool for windows starter 7 that came with my new netbook, I need, really miss this feater

  One or both of these right for you?

  PrintKey:
  http://www.Freewareweb.com/cgi-bin/archive.cgi?id=292

  Snippy:
  http://www.bhelpuri.NET/snippy/default.htm Bruce Hagen MS - MVP [Mail]

• Post-it Note, Snipping Tool, Sound Recorder etc missing from the Start Menu

  Some integrated programs have suddenly disappeared in the folder 'Accessories' in the Start Menu, including sticky notes, Snipping Tool, Sound Recorder, and record Tablet PC Tools was empty too and maybe even more than programs that I do not know. (I don't know why this happened, the only reason why I can think of is maybe I fell a development of my antivirus program).

  I looked online for solutions, I tried:

  -Option unchecking and rechecked the "Tablet PC Tools' of the 'Turn Windows has or not', which bought only the programs in the Tablet PC Tools in the Start Menu folder, but not the Post-it Notes and other

  -Restore to an earlier point, but did not work

  -Enter sfc/scannow in the command prompt but it has said is that Windows has no problems of integrity or something after scanning and solves nothing

  The programs are always there, I found 3 of them in C:/Windows/System32 as exe files and they work from there, but they just will not be displayed in the Start Menu or when I do a search. I don't know what else is missing. Is it possible to bring them back in the start menu? Would be fixed it with a factory reset? - but I don't really want to do a factory reset, unless I am out of options.

  Help would be much appreciated!

  A factory reset would, but that's certainly an exaggeration just to restore shortcuts.

  A colleague MVP of my friends has released a download of all the default shortcuts in Windows 7 and has instructions on how to retrieve it here:

  http://www.SevenForums.com/tutorials/135246-start-menu-all-programs-Windows-7-restore-default-shortcuts.html

• How to start the tool captures

  Windows 7. How to start running the tool captures? Cannot be found in the start menu. How about a keyboard shortcut?

  What version of Win7? Starter and I think that basic home edition does not include the capture tool.
   
  Type cutting tool in the start menu. Search box. If you find, create a shortcut on the desktop.

• Not possible to start after recovery

  Hello

  Yesterday my Toshiba Satellite L555-110 is not stopped correctly. It looked like endless loop, while Win 7 (64 bit) showed "logout". I turned the laptop off (5 sec power button). After that, Windows is not started anymore. There was a black with a message screen as 'Please make sure that all devices such as hard disks, CD-Rom drives, etc. are well connected and try again.
  I thought that I hit the file system and started a live Knoppix CD. I tried to fix the file system with ntfsfix on each partition. This does not solve the problem, so I tried to fix Win7 with the Original Win7 from my other computer disk. In the installation menu repair tools is not started, so I had to stop the computer again.

  I thought that the problem could be the MBR after that. I searched the web and found a "command of Knoppix'"sudo testdisk"with the option"write MBR ". After trying this, the error message has changed, that the computer does not recognize the bootloader more. Here, I decided to use the recovery DVD that I created after purchasing the laptop.

  Once the recovery is finished, I tried to boot Win7, but there was a new error message (on a black screen) who told me that there are files broken in C:\Windows\system32\drivers.
  As my girlfriend has the same model of laptop computer than me, I decided to copy the folder "drivers" of his laptop (after the renaming the originial files), start knoppix, and copy it to my laptop. While trying to boot Windows with the 'safe mode' option there is no error message more appear, but now I have a hangup.
  After that I tried to install Win7 with the original disc in my other computer, but when you try to install, there is a message 'C:\$Secure' kind of broke down. Try the chkdsk command. Repair tools has not responded (infinite loop) after a few minutes of trying to find the Windows installations

  Can someone help me? I have no idea what to do at this point

  If you have two absolutely identical laptops equipped with identical hardware put HARD drive laptop s girlfriend in your laptop and try to start Windows.
  Please post the result.

• Modules window does not appear when I go to tool > Add ons.

  A notice says: "a script running is not enough..." "often appears and I can't open my Add-ons when I go to: Tools > Modules

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')