Tools of type vertical doesen't work

Similar Questions

• Illustrator CS6 tool stuck typing vertically

  Hello... All of a sudden, my tool of type start typing only vertically. I can't get it back to normal.

  I tried to reset the tool, double control of the orientation (horizontal is checked) and make sure the vertical text tool is NOT selected... I tried to reset the workspace, restart Illustrator... but whenever I start typing, he wrote upwards.

  Any suggestions on how to fix this? I have no idea how it got this way. Thanks in advance for any advice.

  lindyb,

  According to me, maybe it's time for the list; strangenesses can occur by themselves.

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• When I go to "Selection tool" and "Type tool" for example. I can't go back in the selection tool again. It is locked.

  When I go to "Selection tool" and "Type tool" for example. I can't go back in the selection tool again. It is locked.

  I did a fresh install, and the programme of work of the normally.

• How to type vertical text from the bottom up with the right orientation for a graph?

  How to type vertical text from the bottom up with the right orientation for a graph?

  Hello! Below, I'll demonstrate how to have vertical text in two different ways.

  Example 1:

  1. below, I have a graph and want to label the vertical axis.

  

  Select the text tool, and then the Vertical text tool.

  

  2 with the vertical Type tool, I tap on my vertical label.

  

  3 with the move tool, then I can orient the text in a position desired, as shown in the examples below.

  

  

  If this isn't the desired orientation of the vertical type you would like. I have the example 2 below.

  Example 2:

  1. After typing my text vertically with the Vertical Type tool (in example 1), I want to move to a horizontal position. I can go up to the options panel and select the icon "show/hide text orientation", surrounded by below. It will pass the text back and forth between vertical and horizontal.

  

  

  2 after the passage of the text to be horizontal, I want to change the orientation of the text, so it is aligned with my vertical axis.  Go in Edit > transform > Rotate as shown below.

  

  3 you want to can Rotate the text as indicated below.

  

  

  4 text is not in the right position we want, so we have to move the text, as illustrated below. Press enter/return to perform the complete transformation.

  

  5. the text is shown below.

  

  Other links:

  Please post back with any questions,

  Janelle

  
  

• WiFi doesen't work on my new Satellite L850-13 q

  I just bought a Satellite L850-13 q and my WiFi doesen't work. Win 7 64 bit and I installed the Atheros driver because this system, but he said, there is no aviable connection, but my old computer is a good number of them.

  I turn it on with the FN + F12 keys, and the orange led is light. What can I do?

  Hello

  Did you mean right turn?
  There are three LEDs on the front of the laptop.
  The last (first from right) is an indicator of WLan.
  If it is enabled, the WiFi network must be enabled.

  The laptop s WLan supports 802.11 b, g and n standard.
  Your WLan router is set to b/g or n?

  I think you should also try to reconfigure the wireless network.
  Go to the Control Panel-> Network & Sharing center
  On the left, choose Manager of wireless networks
  Now click on add and configure the new WLan.

  Ensure that you have typed the right SSID (name of the wlan), the encryption and password encryption

• Scrolling W540 doesen't work

  Hello

  I w540 win 10.

  Synaptics horizontal scrolling doesen't work on my TrackPoint or TouchPad...

  I have the latest installed synaptic driver.

  Please help to fix this.

  Kind regards

  Poul Erik

  I fixed the problem by installing the old synaptic drivers for win 8.1. Now it works well, but without the new options win 10 drivers.

  I am very dissapointet drivers to win 10 have not been tested by Lenove to prevent this problem. I used a lot of time to find a solution.

  Hope Lenove will fix this soon...

  Poul Erik

• When I connect webcam Microsoft 1407, the pc it reads as "Vimcro Vénus" model of webcam and it doesen't work

  Original title:

  When I connect it to my pc it is read as a model of "Venus Vimcro" of webcam and it doesen't work, how can I solve it?

  Hello

  You did changes to the computer, before the show?

  Method 1:

  Run the troubleshooter of material and check.

  Open the hardware and devices Troubleshooter

  Method 2:

  Connect the webcam to another computer and check if you face the same problem.

  If the above does not help, I suggest you to contact technical support for Microsoft Hardware.

  http://www.Microsoft.com/hardware/en-us/support

• How can I get the type of coverage to work

  type of coverage

  How can I get the type of coverage to work

  Hi Ted,

  Once you take the type of coverage, it's ready to go!

  You are in a place to type in information?

  Once it is aligned, it works like a regular keyboard.

  B Eddie

• Problem with Illustrator CC Type Vertical

  I'm trying to change the orientation of type in Illustrator CC, but it doesn't seem to work

  .

  Normally I select type > Type Orientation > Vertical and direction changes so that the letters are separate.

  Lately, however, when I select this option simply turns the whole line of text 90 degrees. The same thing happens with the vertical type tool, instead of typing one letter under the other, that he hit just as if I have my line turned.

  I tried the rotation of characters, but it does not work with the vertical type but it works very well with the horizontal type.

  Normal type

  

  Vertical type

  

  Uh, using the version 2015.3 as well.

  I understand the problem anyway. In the paragraph Panel, I clicked on the drop down menu (Options) on the upper right corner, and I changed the setting to the instead of Middle Eastern single-line composer Adobe single-line composer.

  Maybe the problem has to do with the fact that um using Adobe ME.

  Thanks for your help.

• Hibernate button disappeared; Microsoft Fix tool and manual correction do not work either

  Windows Vista Edition Home Premium 64.  Ran disk cleanup and the Hibernate option is now missing.  Microsoft fix tool and the command promt 'powercfg-h' or ' market / hibernate on "does not work either. Is there another way to restore the hibernation in the start menu option or something escapes me?  Thank you.

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• CS5: Area tool to Type text input in a tiny processing

  Everything seems to work properly (at least the parts that I use).

  At one point, several months ago, my sister and I were playing with transformation (by phone, we are in different States) - she had taken a course in Photoshop and I wanted to try to replicate something.

  I tried to use my text tool yesterday and couldn't see anything when I typed. (White background, Black Arial, 14 pt, 100% text)

  I tried to type presets for compensation.

  I finally tried blowing up to 500% and saw a picture of fonts as small, gray where I was typing.

  I held the CTRL key and played with the processing area: if I developed the box, my text is there.

  I tried clicking all at the top in case of transformation, but have no idea of what I'm doing.

  I don't know how to get my text, text in the usual way input tool.

  Help, please.

  Thank you!

  Your size printing and resolution can be programmed to an absurd number. Check the size of the Image and the PPI and change if necessary something normal (Resample uncheck the box if you do not want to change the number of pixels)

• Satellite A200 - 14 d: vertical scrolling touchpad works more regularly

  The driver is updated, the touchpad works normally most of the time, but occasionally (very often) the vertical scrolling stops (the bar on the right side of the touchpad) react and it is impossible to scroll vertically. After awhile, he reactivates again and works normally again...

  What is the problem?

  Who knows why this is happening there? :)
  It will be nice to have answer to these recurring issues.

  Have you tried to play a bit with the parameters of virtual scrolling?
  Try to change the scrolling area. Try to expand a bit.

• Keyboard Logitech K811 pairs, connects but won't type; keys do not work.

  Have a Mac Pro Tower running OS X 10.6.8 build 10K 549, which should be the snow leopard.  The computer does not

  Snow Leopard, it says "Mac OS extended (journaled) Version 10.6.8."  Keyboard, Logitech K811, lists requirements

  10.6.8 or later, then it should work, even if it's the last (oldest) version he needs.

  I can get it to PAIR, I can get it to CONNECT, but the keys don't work.  He do not type anything.  None of the keys do anything

  whatsoever, even if the computer and Bluetooth icon show paired and connected.  The keyboard is loaded;

  no battery low light showing.

  Have you checked the Web from Logitech website to see if there is required software drivers?

• Display vertical lines not working - blue and grey

  I bought a Macbook Air on July 2014, but did NOT purchase the extended Apple Care. On October 2015 the display just stopped working one morning given. Not even the Apple logo appears when you turn on the computer. The screen goes black night at vertical lines different colors of light blue gray. This happened only 3 months after the expiration of the warranty. I tried resetting the NVRAM, but it has no effect.

  As I am currently in the Brazil works, I had to make to local technical assistance, which sent me a quote to close to US $1000 to replace the display. It is about this that paid for the entire computer when it bought in Boca Raton, Florida.

  Apple will do something to replace it, or do I just give up the Macbook Air? I'm not ready to pay that much to fix and I find it absurd that this happened only 3 months after the expiration of the warranty. If this was a minor issue, OK. But the screen does not like that in such a short time is unacceptable.

  Here are some photos showing what the screen looks like:

  

  

  Hello, I have a mac book pro 17 '', beginning 2011 and during the day to El Capitan 10.11.2 vertical lines appeared. Its lines of blue pixel, similar as in the photo, but uniform, efevery 1 for about 3cm in the centre-right part of the screen.

  Reseting LANDAU does not help.

• Hardware diagnostic tools error pcdrsinfosystemboard.p5x has stopped working

  pcdrsinfosystemboard.p5x has stopped working message each time I have start hardware diagnostic tools in vista Home premium on hp Pavilion slimline s3700y pc

  My hardware diagnostic tools came pre-installed on my pc when I bought it. I didn't uninstall with revo uninstaller to get rid of all the remains and re-installed using the Recovery Manager. It has been fine since. I hope this helps someone in the future, which could run into this same problem. Thank you for asking. I always wanted to help out where I can in the field of computers, I get so much help from others.