ToolTip in OBIEE 11 G reports when we spend on its data.

Similar Questions

• How to hide a column in the report when there are only zeros.

  Hi Experts.,.
  
  Is it possible to hide a column in the report when there are only zeros.
  
  Thanks in advance
  Vincent

  Vincent Krishna wrote:
  Hi Experts.,.

  Is it possible to hide a column in the report when there are only zeros.

  Thanks in advance
  Vincent

  No out-of-the-box, but there are several workaround solutions if you want to continue an any of them:

  (1) use a view selector. A single report will be a pivot table with the column, the other will have the same report less column. Users can switch reports.

  (2) use a column selector. The two choices would be this column or an empty space. If white is chosen (because the user has no values), the column "will disappear" according to the report.

  (3) guided use NAV. This method involves the intervention of the user. Build a small report using the single column and put a filter "is not equal to" 0. Because there is only a single column, so all lines are 0, the report returns no rows.

  Use this report in the properties of guided navigation from one section of the dashboard. Assign to this "If the report returns lines" and put the report that contains the column in this section. Now add another article on your table edge and in the properties of guided navigation of this section, set on "If the report will return no rows" and it points to the small report as well. In this section, put a second version of your report without the column in it.

  When the column contains all zeros, the second section with column will not display in it; the first section is not displayed. When at least a line contains a value not zero, the first section is displayed with the column, and the second part will not be.

• OBIEE / BI Publisher report question

  Hi, quick OBIEE / question BI Publisher. We have an obligation to produce a very formatted report, complex. All data are in OBIEE - but there are several disciplines necessary to answer questions (thus queries of multiple responses).
  
  Assuming that I can create a report of responses with the raw data for each section (a "header" section, section ' detailed costs', section 'budget', etc. - which everyone would be in a separate query responses), is it possible to use BI Publisher to then "chaining" each section separated into one integrated report?
  
  I'm not very be applied BI Publisher. I know how to use a query answers like 'source' for a report of BI Publisher. But I don't know how to have multiple responses on a single BI Publisher report queries.
  
  Thanks in advance!
  Scott

  Hi Scott,.

  In your report, BEEP, you will need a separate set 'data' for each answer. What you need to do is click on 'Data model' and select 'Concatenated SQL Data Source' as the main data set. It will combine the results into a single xml result set.

• presenting a report when you click on a link

  Hello
  
  I try to display a report when you press a link in a page. Is there anything that can be shown as a link. My
  
  requirement is like this. I have a text at the beginning of a page like * some mistakes took place for the information on
  
  errors, please click here* (here click here will be a link) and by clicking on this link will display a report on this page.
  
  Is there a way to do this. Any help/suggestions will be appreciated.
  
  Thank you
  
  Nadège

  Hello

  Create an HTML region.
  The Source would be something like:

  Some errors has occured to get details of the errors please click here.
  

  Mike

• How can I delete a filter automatically on an interactive report when I get back

  I have several pages with interactive reports. If the user implements the filters to refine the list in the report, they are still there the user returns to that page later, even if I clear the cache.
  
  How can I make the interactive report raise the base with no additional filter report when the user returns to the page?
  
  Thank you

  The doc of the APEX to the http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/app_comp.htm#sthref989

  >
  To restore an interactive report in a link, use the string "RIR" in the section Cache Clear of a URL. This means the user choose the Reset option in the menu interactive report actions on the target page. The report is returned to the default report parameters specified by the developer.
  >

  CITY

• Stop the updating of the region (report) when you press the button

  Hello
  
  I created a report region, using the select statement:
  

  select * from TABLE(CAST(JCMS_MERGE_BATCHES_PKG.show_merged_batches_fn('M29||0') AS jcms_rep_batch_type))

  Is there a way to stop this submission report when you press a button on my page?
  
  The reason for this requirement is that my report contains checkboxes for each returned row. The default value for the checkbox control is CHECKED when the report is refreshed. However, I would like users to uncheck some lines in the report, click a button and have a treatment performed on ONLY the checked lines. My page almost works, but because the report is refreshing, after I completed my treatment, the report is back with all lines in the selection again.
  
  Thank you very much
  
  Paul

  I think that your condition is similar to the following:

  http://HTMLDB.Oracle.com/pls/OTN/f?p=31517:219

  However, it is not trivial.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• What value for p_print_server when you use the Rest Data Services as a print server?

  Hello

  I have my report server on the internal workspace defined as BI Publisher URL as default... It works for my BI Publisher reports.

  I have 2 reports who need to use the rest Data Services FOP engine and use GET_PRINT_DOCUMENT function Signature 4

  https://docs.Oracle.com/CD/E59726_01/doc.50/e39149/apex_util.htm#AEAPI146

  For these 2 reports, I need to pass a parameter to p_print_server. The documentation describes this as the URL for the print server

  My question is, how to find the URL for p_print_server when I want to use the rest Data Services FOP on ADR?

  I can not put as NULL as at the time, it will use the default BI Publisher URL and then these 2 reports will not work

  Moreover, when I put the server reports on internal workspace as 'Rest Data Services', my two reports work fine, but not when I put is as URL BI Publisher - which is necessary

  Help, please

  Concerning

  Matt

  Hi Matt Mulvaney,

  Matt Mulvaney says:

  I already have the correct configuration to be able to produce reports FOP including two steps you mentioned. This set works very well when I put the "Print server" preference in the settings of APEX Data Services Instance remains - and reports can be produced. But as I said, this must be set to a URL of BI Publisher.

  If you use "Print server" as "Oracle BI Publisher" then the p_print_server parameter would have been:

  http://myserver.mydomain.com:8888/xmlpserver/convert

  Where:

  • Printing of the address of the host server: myserver.mydomain.com (you can also use the IP address)
  • Print Server Port: 8888 (depending on what your BI Publisher Server uses port)
  • Print server script: / xmlpserver/convert

  Similarly, if you choose "Print server" as 'Oracle REST Data Services', the instance settings don't ask questions on the print settings, but internally it uses the following parameters and the p_print_server parameter is:

  http://myserver.mydomain.com:8080 / ADR / _ / fop2pdf

  Where:

  • Printing of the address of the host server: myserver.mydomain.com (host computer on which ADR is hosted)
  • Print Server Port: 8080 (the port used by what ADR/APEX Forum)
  • Script of the print server: / ords / _ / fop2pdf (this is not disclosed by APEX/ADR documentation, but as mentioned by Marc Sewtz in the following thread)

  Reference: Re: Apache FOP disappeared by Oracle APEX installable APEX 5.0 and 5.0.1 APEX

  Kind regards

  Kiran

• What is event ID # written in the event log when a user compresses its C:\ By car

  Windows XP Pro - SP3

  I want to know what entry # and details entry appears in the event log when a user compresses its C:\ By car

  There is none.  But if you compress ntldr in the process you will certainly get an unambiguous error message when you restart the computer.

  John

• I used to be able to do with discs DVD-R data discs, now iv changed my hard drive and my computer only recognizes CD - R when I try to burn data?

  "Please insert the disk" error message when I try to burn data to DVD-R disc but works fine when burning data on CD - R.  Also, he can't read and data DVD - R disks, I made from the same computer in the past with the old hard drive, is my new hard drive, missing some sort of driver or something?  Windows XP computer bought from Dell about 4-5 years (Dell 5150).  He let me play commercial CD, burn CDs and burn data on CD - r.  He no longer do anything with a DVD-R disc, wont even recognize one, please help

  Hi malikchebli,

  See the below Microsoft article and try the steps mentioned, check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

• In "Battery use" WiFi always reported as ONE regardless of its State

  In "settings |" Power management | Use of the battery. History details"WiFi is always reported as ONE regardless of its actual condition. The bar with Wi - Fi is always drawn as continuous, besides that sometimes WiFi's actually gone, or defined on but currently not connected.

  The power of the phone is important. I'm afraid that maybe module WiFi is in fact never off, but logically not receive. So off it is repored as turned off by apps like Info II network, for example.

  No idea how to check what is happening why?

  Someone at - he noticed this problem too?

  I know the solution. It was 'Viber"who kept always on WiFi. After you set the corresponding option in Viber on off, the problem disappeared.

• I booked window 10 but when I chk ability its bios says unsupported for windows 10

  Hello please help appreciated I have Dell N5110 of i3 with 4 GB of ram disk hard 500 GB, I booked 10 window but when I chk ability its bios says unsupported for windows 10 here for screen shots of my laptop specs kindly let me know it will be running on my system or not

  

  The OptiPlex 360 will run 10 64-bit fine Windows. Windows Update will download the 8.15.10.2697 driver version and install it after installing Windows.

  

  I don't know why the Inspiron N5110 would have an incompatible BIOS. Heres another thread om Dell Community Forums:

  http://en.community.Dell.com/support-forums/software-OS/f/4997/p/19636195/20775516#20775516

• I have a problem when you try to receive data using the socket connection.

  Hello

  I created a socket connection between a pc (sever, win32) and a blackberry (client) and I have only two questions:

  -When I send a string to the sever I get the unexpected result, I doubt if it's a problem of encoding between platforms.

  -When I try to receive data, (an array of char as a string object), the customer demand freeze (drawing and management of events, so basically the main UI thread), even if I did all the stuff of connection in a separate thread, until I have shut down the server and also no data is received.

  I left the codes below and would assess any response from you.

  C++, win32 console application:

  SOCKET _Socket;

  int _tmain (int argc, _TCHAR * argv)

  {

  If (start_sever (_socket)) {}

  char r_msg [26];

  recv (_socket, r_msg, 26, 0);

  std::cout< "receive="" :="" "="">< r_msg=""><>

  char * s_msg customer = 'welcome ';

  Send (_socket, szMessage, strlen (S_MSG), 0);

  std::cout< "send="" :="" "="">< s_msg=""><>

  Sleep (500);

  Shutdown (_socket, SD_SEND);

  closesocket (_socket);

  WSACleanup();

  } else {}

  std::cout< "cannot="" initialize="">< std::endl="">

  }

  System ("pause");

  return 0;

  }

  BOOL start_sever (socket) {}

  WSADATA WsaDat;

  If (WSAStartup (MAKEWORD (2.2) & WsaDat)! = 0)

  {

  std::cout<"WSA initialization="">

  WSACleanup();

  System ("pause");

  Returns false;

  }

  Socket = socket (AF_INET, SOCK_STREAM, IPPROTO_TCP);

  if(Socket==INVALID_SOCKET)

  {

  std::cout<"Socket creation="">

  WSACleanup();

  System ("pause");

  Returns false;

  }

  SOCKADDR_IN serverInf;

  serverInf.sin_family = AF_INET;

  serverInf.sin_addr.s_addr = INADDR_ANY;

  serverInf.sin_port = htons (8888);

  If (bind (Socket,(sockaddr*) (& serverInf), sizeof (serverInf)) == SOCKET_ERROR)

  {

  std::cout<"Unable to="" bind="">

  WSACleanup();

  System ("pause");

  Returns false;

  }

  Listen(Socket,1);

  SOCKET TempSock = SOCKET_ERROR;

  std::cout< "build="">

  while(TempSock==SOCKET_ERROR)

  {

  std::cout<"Waiting for="" incoming="">

  TempSock = accept (Socket, NULL, NULL);

  }

  Socket = TempSock;

  std::cout<"Client>

  Returns true;

  }

  Platform of Java for blackberry:

  public class Bush extends form {}

  -my current ipv4 address is set by default to avoid reset at each test

  TextField ip_text_field = new TextField ("IP address:", "192.168.65.1");

  -the server is waiting for any connection to this port ("8888")

  TextField port_text_field = new TextField ("Port:", "8888");

  ButtonField go_button_field = new ButtonField ("Connect", Field.FIELD_HCENTER) {}

  protected Boolean invokeAction (int action) {}

  UiApplication.getUiApplication () .invokeLater (new Runnable() {}

  public void run() {}

  try {

  open_connection();

  }catch (System.Exception e) {}

  e.printStackTrace ();

  Dialog.Alert (e.getMessage ());

  }

  }

  });

  return true;

  }

  };

  public Socket() {}

  Super ();

  setTitle ("[taking sample]");

  Add (ip_text_field); ip_text_field.setMargin (20, 0, 0, 0);

  Add (port_text_field); port_text_field.setMargin (30, 0, 0, 0);

  Add (go_button_field); go_button_field.setMargin (30, 0, 0, 0);

  }

  public Boolean onClose() {}

  this. close();

  return true;

  }

  _Con StreamConnection;

  DataInputStream _in;

  OutputStreamWriter _out;

  public Sub open_connection() throws Exception {}

  _CON = (StreamConnection) Connector.open ("socket: / /" + ip_text_field.getText () + ":" + port_text_field.getText () +)

  » ; deviceside = true; interface = wifi");

  this.add (new TextField ("", "connected successfully to Server"));

  _in = _con.openDataInputStream ();

  _out = new OutputStreamWriter (_con.openDataOutputStream ());

  String msg = "Welcome to customer \r\n";

  _out. Write (MSG);

  String r_msg = _in.readUTF ();

  this.add (new TextField ("read from sever:", r_msg));

  _out. Flush();

  _in. Close();

  _out. Close();

  _CON. Close();

  this.add (new TextField ("", "data has been changed"));

  }

  }

  Thanks for your help.

  You treat on the thread of events.

  You have the following code:

  UiApplication.getUiApplication () .invokeLater (new Runnable() {}

  public void run() {}

  try {

  open_connection();

  .....

  Now invokeLater essentially tells the operating system that the associated executable must be run on the event Thread.  You need start a separate Thread.  Extend this Thread, add your code in the run() method, and then start the Thread with start(). (not run()).  Then you must run the networking of processing on a separate Thread.

  This will cause you problems updating the user interface.  Take a look at this help:

  http://supportforums.BlackBerry.com/T5/Java-development/update-a-screen-on-the-main-event-thread/TA-...

  Printing, this means that invokelater a separate Thread is a common misconception.  I recommend you to look at this:

  http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865

  In addition, I recommend that you take a look at the socketDemo which must be included as a sample-, otherwise you can find it on github:

  https://github.com/BlackBerry/JDE-samples

• I have a digital signature, but when trying to install its software, it says "(Package of Installation not supported by the processor - it comes to i3)?

  I have a digital signature, but when trying to install its software, it says "(Package of Installation not supported by the processor - it comes to i3)?

  Hi Richard,

  1. what software are you trying to install?

  2 are. what digital signature you referring?

  3. What is the brand and model of the computer?

  4. you made any hardware or software comes to the computer before the show?

  Also check out the links for more information:

  What is a digital signature?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-digital-signature

  How can I decide that drivers are safe to install?

  http://Windows.Microsoft.com/en-us/Windows7/how-can-i-decide-which-drivers-are-safe-to-install

  Please write to us with the exact details of the question and the answers to the questions above so that we can help you further.

• We get an error when I try to collect data from vCenter Server. But the Collection of Cluster works!

  Hello

  I m getting a strange errormessage when he tries to load my vCenter Server inventory.

  I have configured my vCenter Server as the endpoint server and I was able to load the Clusters. When I klick collection of data in a Cluster (Cluster of EQL 1) I can load all the data and the State is 'successful', but when I try to load the inventory FRO the vCenter Server (to get the models) im getting this error message:

  The treatment [inventory], error details error: illegal managed object reference type, folder.

  The same schows Agent logs:

  [26.08.2014 16:48:16] [Info]: start: treatment Workitem ID [2e38598e-4385-4b2d-bc88-fd2b773d1f98] [inventory]

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.Admin.Hostname = vCenter

  [26.08.2014 16:48:16] [Debug]: [[inventory]] VirtualMachine.Admin.ParentIdentity = [inventory]

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.ManagementEndpoint.Name = vCenter

  [26.08.2014 16:48:16] [Debug]: [[inventory]] VirtualMachine.ManagementEndpoint.Identity = [inventory]

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.ManagementEndpoint.Endpoint0 = vCenter

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.Admin.Name = inventory

  [26.08.2014 16:48:16] [Error]: <? XML version = "1.0" encoding = "utf-16"? >

  < Boolean > false < / Boolean >

  Error parsing [inventory], details of the error:

  System.ArgumentException: Illegal managed object reference type, folder.

  at DynamicOps.Vrm.Agent.vSphere.VSphereGetHostsRequest.ExecuteImpl)

  at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.GetHosts (ManagementEndpoint managementEndpoint)

  to DynamicOps.Vrm.Agent.Collector'3.get_Hosts)

  to DynamicOps.Vrm.Agent.Collector'3.CollectManagementEndpoints)

  to DynamicOps.Vrm.Agent.CollectInventory'3.Collect)

  to DynamicOps.Vrm.Agent.BaseHypervisorAgent'3.EnumerateHypervisorResources (collector collector 3, WorkItem workItem, PropertyBagHelper propertyBagHelper)

  to DynamicOps.Vrm.Agent.BaseHypervisorAgent'3.ProcessWorkitem (WorkItem workItem, task of the chain, PropertyBagHelper propertyBag)

  to DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.ProcessWorkitem (WorkItem workItem, task of the chain, PropertyBagHelper propertyBag)

  to DynamicOps.Vrm.Agent.BaseAgent.ProcessWorkitem (WorkItem workItem)

  I hope that someone had an idea, im out of ideas.

  THX Steven

  There is no data for the endpoint collection... And I'm not entirely sure of how you added the vCenter object it... y at - it a calculation object named "vCenter? To answer your specific questions about the models, however, they must be stored on a cluster that is part of the tissue group for data collection to pick them up... They are not considered as a global entity (as a resource calculation). Add models to one of the clusters and then to collect data on it, and you should be fine.

• I have 13 items and my computer krasched so need a new number. It also on my laptop. When I start working its saids you already have 2 compers.

  I have 13 items and my computer krasched so need a new number. It also on my laptop. When I start working its saids you already have 2 compers.

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena