Similar Questions

• My ID apple has been disabled and I can't restore it because I forgot my security question, please help

  My ID apple has been disabled and I can't restore it because I forgot my security question, please help

  I can't update my iphone because it will need for my apple for activation ID. Please help me.

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• How to play that button set chapters? Please help ASAP!

  How to play that button set chapters? Please help ASAP! I try to create 6 chapters of two videos, but I don't know how to set all play too. If I put a playlist with chapters 1 to 6 of the room all the button plays not all but only up to Chapter 2 and after the jump to finish and stop! What I've done wrong?

  If I put a playlist with chapters 1 to 6 of the room all the button plays not all but only up to Chapter 2 and after the jump to finish and stop! What I've done wrong?

  You have an end action or a substitution on any of the chapters.

• First and After Effects are absent from the Cloud Adobe Application Manager... Please help ASAP

  First and After Effects are absent from the Cloud Adobe Application Manager... Please help ASAP

  Short and accurate: if they don't appear, your system does not support them. Refer to the plug Tech on the product pages and make your choice...

  Mylenium

• Touch pad questions, please help.

  Laptop HP Pavilion

  Model: 15-n096sa

  Product: F4T58EA #ABU

  OS: Windows 8.1 Home Premium X 64

  I installed Windows 8.1 Home Premium X 64 on my laptop last week, he had originally version 8 is installed when I bought a month ago. Since the upgrade of the OS of my touchpad is no longer allows me to scroll with two fingers or enlarge the pages, use the right click function by tapping with two fingers & also bring up the options in a Sling. All I can do now is to move the pointer and click or double-click with the pad.

  Can someone please help me solve this problem because it drives me crazy?

  Thanks in advance.

  Hello EnergySyndicate,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems with certain features of the touch pad doesn't work does not correctly. I think it's a question of settings. I'm you provide a HP support document: use and troubleshooting of the TouchPad and ClickPad (Windows 8) that will guide you in how to adjust settings and ensure that the common gestures of the Touchpad is correctly configured.

  I think that this will solve your problem of Touchpad and allow you to go back to listening to your computer. Thanks for posting on the HP Forums. Have a great day!

• HP paviilion 15 laptop: screen brightness please help ASAP

  Hi guys, my display brightness is not adapt a day ago not used for theres no etc system restore and when I press f2 or f3 theres no increase or decrease it please help im really in urgent need all my software are average date until

  Hi @DylanL,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your 15 HP Pavilion Notebook and brightness does not properly. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options.
  Select balance, then click on change plan settings. Click on change advanced power settings. Then save changes. Sometimes just changing and selecting apply it and change it back solves this problem.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 8.  Please restart the laptop twice to make sure that all updates are completed!

  You can also try:

  In Device Manager, click the arrow next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  Please let me know how it goes.

  Thank you.

• Facial recognition technology Optimus for T410 questions - please help

  Hi guys, I bought a T410 with NVS 310 graphics card and built-in webcam. Although the battery 9 cells works really well, I always like to save more power using the integrated graphics card Intel in light load. It's supposed to be done using NVIDIA Optimus but I can't ' find it anywhere or how to activate it. Some have said depends on pilots and I did not try that again. Please help for a long time.

  The next question is the software of face recognition, as my friend's Asus laptop has Smartlogon using face. I really enjoy doing on my T but I searched a lot of places and can't find it. I knew he had formerly VeriFace which seems to have stopped developing for Thinkpad. If anyone has this software, please give me the link.

  And once I found a problem with a device called Lexmark X 422, windows 7 reports that it may not start (code 10), I try the new driver and still no use. I have disable (uninstall) it can restore the entire system and now I can't find it in device manager to try to fix it again. My question is what is this device and how to correct these problems?

  Thank you, T rocks!

  Hi and welcome to the forum!

  To Optimus, take a look:- http://support.lenovo.com/hk/en/HintsandTips/hints_show_12832190176531.html

  Lexmark X 422 was probably your webcam, there is no need to do anything if the machine works fine now.

  Not sure on the recognition of faces, as far as I know there not this feature for ThinkPad.

  I hope this helps.

• When to change a start page preferably, a dialog box pops up and won't go away, even after clicked and restart FF. Please help ASAP

  This dialog box indicates "an attempt to change your home page and default search has been blocked" & "click to change these settings. After clicking on the "close button {X}", won't let the box of my screen, where it blocks ANY activity. Which means that, not only the dialog box covers aloud to the left of my screen (on my Mac, blocking access to all of the choices of window button).

  Literally blocks the activity of the screen all THE more of a 3 "-4" AUTOUR / greater than the size of real dialog box. " Move windows just so I can access the window buttons, although clear of ' under / covered by "dialog, the buttons still do not accept that is clicked, to inch away from the box. Even if it seems to be completely cleared and outside the box.

  When I go to another application, like the finder or to a full-screen video game, your still dialog box, any blockage 'slot' and 'around '. It will not disappear, even after that I went to my preferences and original re - has chosen settings of no.

  PLEASE HELP AS SOON AS POSSIBLE BECAUSE IT IS VERY ANNOYING SCREWING WITH MY WORKFLOW - SEE PHOTO! Unfortunately, your browser will not upload a screenshot of 49K of this anomaly.

  Moreover, to load the image, you can meet your own message and attach the image to the response. Please change or blur sensitive information in the file before uploading the image.

• Satellite P10 554 will not start! Please help ASAP!

  Hello, please someone help as soon as possible.

  I got it for a few years now. A keyboard replaced Germnan to English.

  Used it three days ago and was very good. It shows no signs of something not ussual.

  This mornign however, I pressed the "power" button and not started. I tried to connect the battery, no indicator light came.

  I'm lost-don't know what to do.

  Please help someone?

  Thanks in advance

  Hello Morta

  If the unit is connected to the power supply and if there is no response after pressing power button must be some hardware malfunction. Press the power button and hold down for a few seconds. I put t know how old is your device but it is possible that the warranty is still valid. Please contact the customer Service of your country partner and let check the device. The warranty will cover the costs.

• go mini questions please help!

  When I turn on my HP mini computer her talk me to "enter the current password" and after three trys it says "system error fatal vaulted password control failure" with code "CNU9475MH7" Please help me through this form as soon as POSSIBLE. I need the important information on this computer!

  Try to ally.

  e9lovxq4zx

  3rd letter tiny L.

  4th letter lowercase O.

  7th letter lowercase Q.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  IF demand for CURRENT password using this code.

  REQUEST NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Problem with the command net user. Please help ASAP!

  What is happening on Windows XPI logged on as administrator on my computer, then in the command prompt, I typed: net user administrator active: / Yes (and pressed enter). After that I restarted the computer, I can not connect, and was my password (password). Please help me as soon as POSSIBLE. Thank you!

  Your syntax is incorrect for the command "net user".  You probably wanted to enter the command:

  NET user administrator / Active: Yes

  The syntax of the command 'net user' (according to this article) is:
      net user [Username [password |]] *] [options]] [/domain/domain]

  All options begin with a forward slash character (/)

  By omitting the character "/" before "active:", you have probably changed the password of user 'Administrator' in "active:" or "active: / Yes" depending on whether you entered a space before the 'yes '.  Try to connect as an administrator when you enter that as your administrator password.

  HTH,
  JW

• WRT150N questions, Please help!

  So I just moved into my new House and set up my internet. I used my router before without any problem so far. So my problem is that I have this linksys router and a motorola 2210 dsl modem AT & T Eh well, if I run the Ethernet directly from the modem to the computer internet works fine. But once I added the router I can not get a connection. With the connected router, I have all green in all areas on the modem and the router "I should be connected by saying" my wireless devices are showing my hense network I should be able to connect to it. But it always says connection failed... At one point, I even had my office that I was connected to 54 Mbps but still my home page would not load. I have no idea whats wrong. The internet is coming through, my wirelss peripheral are picking up that I have a network but I can not connect unless I'm jacked right at the source. Please help me understand this. (and Yes, everything is pluged in the right way)

  AT & T usually configures their Motorola 2210 to the PPPoE connection for you and use the 192.168.1.x subnet.   With its default settings, your WRT150N also tries to use the 192.168.1.x subnet.  But you can't put the same subnet on the Internet (WAN) and the ports LAN of the WRT150N.  It will be, or does not work at all it will not work properly.

  To fix the problem do the following:

  (1) put your entire network.

  (2) disconnect all other devices WRT150N.

  (3) use of an ethernet cable, the son a computer to one of the four ports LAN on the WRT150N.

  (4) turn on the WRT150N and your computer.

  (5) connect to WRT150N to 192.168.1.1

  (6) in the WRT150N, replace the "local IP address" 192.168.2.1

  7) click the 'Save Settings' button and then wait for the screen refresh (3 to 60 seconds).  You will be probably disconnected from the WRT150N.  Don't worry about this.

  Exit 8) your browser and put your entire network

  (9) with an ethernet cable, connect the ethernet port on the Motorola 2210 to the Internet of the WRT150N port.  Leave your computer connected to a LAN of the WRT150N port.

  (10) power of your network.  It should work.

• Please help ASAP

  Please help me!
  Today I was watching a movie on my computer then suddenly the sound stops after I made some adjustments in the reading part to make it work on the helmet and not on the speakers and now when I go on the game it says reading: no audio device is installed
  And now on the sound icon right on the bottom of the page, there is a red 'X' circled on it, and when I pass the mouth above him, he said: no audio output is installed!
  I tried everything and it didn't work... I really feel someones help as soon as possible... I don't have the CD to install the sound, and I don't know how to install it...
  Help, please! This problem is KILLING me!

  Thank you!

  Hello Sandriine,

  Thank you for your message.  If it pleases you, try the following steps and let me know what you see or if this corrects the problem.

  1. right click on the speaker icon in the taskbar next to the time > select "playback devices".
  2. think you that the devices listed in the center of the window? If not,
  Right-click in the empty space and click on "Show disabled devices" > so if you see your speakers you can click right > activate

  We can't wait to hear back on your part.

  See you soon

• BBM EXTREEMLY URGENT - please help ASAP

  Hi, please help. This isn't a matter of life or death... but close enough. I have a Samsung Galaxy S4 and tried to e-mail 1 large cats bbm history for me and my bbm crashed. Now, I don't see no bbm conversations. I don't see my contacts, but not cats. I rebooted my phone and it asked me for my password. I forgot, so I reset my password. However, I still have the same PIN bbm and bbid. Only a new password. How to get a cat bbm? My service provider can help you, or is my missing bbm cat ever? Thanks, much appreciated.

  To make sure that I understand it looks after BBM crashed, everything works again, but your previous conversations in BBM surveys are missing? If so there is no way to restore those individual BBM chat unfortunately.

• GANYMEDE + question: Please help

  Dear all,

  It is with regard to Ganymede +. I have configured Ganymede + on switch cisco, but it is local user name and password

  for authentication.

  With below configuration on the other switch, works very well with Ganymede + username and password, but not with

  This switch.

  AAA new-model

  AAA authentication login default group Ganymede + local

  AAA authentication login no_login local

  AAA accounting send stop-record an authentication failure

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA - the id of the joint session

  RADIUS-server host 10.0.2.193 touches 110A101614425A5E57 7

  RADIUS-server application made

  username admin privilege 15 password *.

  line vty 0 4

  transport input telnet ssh

  by default the authentication of connection

  Also, this switch is configured for intervlan routing, with the following configuration and I added 10.0.6.1 address IP Cisco ACS.

  interface Vlan5

  the IP 10.0.0.1 255.255.255.0

  !

  interface Vlan20

  IP 10.0.2.1 255.255.255.0

  IP helper 10.0.0.7

  !

  interface Vlan60

  IP 10.0.6.1 255.255.255.0

  REFLXIS_PUNCORE #show Ganymede

  GANYMEDE + server: 10.0.2.193/49

  Opening of socket: 33

  Firm grip: 33

  Write-offs of socket: 0

  Socket errors: 0

  Socket timeouts: 0

  Failed connection attempts: 0

  Total packets sent: 33

  Recv packets total: 0

  So please help on the same.

  Hello Eve,.

  the IP address of the server 10.0.2.193 is accessible in 20 Vlan.

  Therefore, the switch will try to connect to the server using the address IP of Vlan20, 10.0.2.1.

  You can fix this in two ways:

  1. change the configuration on the radius server to have an entry with 10.0.2.1 instead of 10.0.6.1.

  or

  2. change the configuration of the switch, adding "ip radius-server source interface vlan 60.

  Please indicate the so useful post

  Marco

• DELL INSPIRON N4010 WEBCAM QUESTIONS: PLEASE HELP... DELL CUSTOMER... AND ANYONE WHO HAS KNOWLEDGE REGARDING MY PROBLEMS...

  I have a Dell Inspiron N4010. Configuration: 1st generation i5 processor with windows 7 home basic 64-bit.

  3 months after the purchase of my laptop, I have updated my Dell webcam central through the applications update service... Shortly after the update, my integrated webcam has started to show problems.

  DESCRIPTION OF THE PROBLEM:

  Shortly after the update of my installed factory Dell webcam central, my integrated webcam has begun to show the problem. webcam was able to start with any application such as Skype or dell central webcam himself. Instead, webcam LED flashes for flicker of a second, and then goes away without any streaming video.  Trying to open it, an error message is displayed: "your webcam can be used by another application. Close the application to launch streaming video".» Initially, the problem was temporary, that is occasionally the webcam began video streaming without any problem, but as the time passed, webcam stopped working almost completely.

  TRIED SOLUTIONS:

  I tried all the solutions mentioned below:

  • I uninstalled the Dell webcam software and reinstalled with the version installed in the factory, supplied on CD with laptop. Uninstalled the webcam via the Device Manager and reinstalled, but without success.
  • I heard that there is a conflict between the Dell face recognition software and dell webcam central. So, I uninstalled the dell face recognition software. After that, the webcam worked for a few days, and there still rebooted problem.
  • I went through various forums online, dell community, customer service, etc. and everything suggested tried but without success. I heard several times that this is not a hardware fault but driver error. Even in a few forums, its says that Creative Technology Limited have not been able to supply webcam drivers compatible with windows 7 64-bit.
  • I even did factory restore my laptop twice, but could not do my webcam works.
  • Then, I decided to format my system and installed windows7 again with the disc that came with my laptop. During this process, I have kept the recovery drive and the untouched OEM disk untouched. I have reinstalled all the drivers in such order as advised by Dell. Despite puts everything in order, I couldn't do my built-in webcam work. More... now I can't even access the Dell factory restore option despite the fact that my recovery disk is intact and it is to have all the files into it!
  • I tried the utility dell online Diagnostics. He could not detect any error webcam!
  • Few days back, I used the dell startup screen diagnostic utility and scanned the built-in webcam to find errors, and my webcam failed in all tests! Here are the screenshots of the tests:

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  I GUESS I GAVE ENOUGH INFORMATION THAT CAN HELP TO DIAGNOSE THE PROBLEM WITH MY DELL INTEGRATED WEBCAM... I ASKED DELL CUSTOMER SERVICE TO HELP ME SOLVE MY PROBLEM OF WEBCAM... AND ALSO THE FACTORY RESTORE INACCESSIBILITY PROBLEM... PLEASE HELP ME...

  AFTER AN ENTIRE WEEK OF UNINSTALLING - REINSTALLING VARIOUS DRIVERS & SOFTWARE FOUND IN THESE FORUMS, SUGGESTIONS INCLUDING REINSTALLING WINDOWS FROM DELL DATA SECURE BACKUP.  THIS IS WHAT I LEARNED.

  My problem was. No supported webcam not connected when I ran dell webcam central. No program could access the webcam. Device Manager showed SPECIFIC DEVICE. Camera suddenly stopped working! I had a little more hair when this problem started.

  I have Inspiron N4010 windows 7 Home premium. Are the drivers for the webcam in windows 7, there is no separate drivers available anywhere. with the exception of some XPS models.

  A post in these forums suggests to abolish the plastic around the display bezel. It's simple. Just carefully go around and remove. It is clipped without screws on my system. This gives access to the webcam hardware. I got dell webcam central on-board. (showing no supported webcam connected!). Gently, I tried to disconnect the connector of the webcam. My intention was to disconnect and reconnect. I barely touched and the fire came and windows immediately started to install device drivers. A beep and an icon in the notification bar popped up. A few minutes, I saw my beautiful mug on the screen to my absolute delight.

  Guys, if you have a problem where Device Manager does not recognize your webcam for most probably, this is a hardware problem. The small rectangular plate on which is mounted the webcam is not properly secured by DEll. It is a DESIGN PROBLEM. The Board is located in place on two small round plastic holders without any screws. It can move easily. The bezel plastic when it is installed itself that holds it in place, but not very effective. When you open and close the lid of the screen, especially if you are taking in the middle where the camera you finally loose connector. That's why some messages will tell you what they camera has stopped working suddenly and then started working by himself all of a sudden. When I put the bezel plastic, it snaps into place, I was able to move the camera, and it stopped working again. A little gentle jiggle got running again and its been since.

  It does not matter what version of central webcam you have in windows 7. It runs on windows Vista service pack 2 compatibility mode. (Find WEBCAMDELL2. EXE file under programs x 86-dellwebcam-dellwebcam Central-dell webcam central. Right-click on the file name. Select Properties. Select the Compatibility tab and run this program in compatibility select windows vista service pack 2).

  If in your case even though there might be a software problem. always try this simple 2 minute solution b4 safe spending frustrating days find the drivers and software. Hope this post helps someone. May work on other systems too! Good luck! and thank you to the guy who led me down this path and misery!