Topic: making the configuration parameter "services.sync.prefs.sync.browser.newtabpage.enabled"?

enabled?

All services.sync.prefs.sync. * prefs are used by Sync, so that they only have effect if you use synchronization and synchronize the preferences.

So if services.sync.prefs.sync.browser.newtabpage.enabled is set to true, then the newtabpage.enabled pref is synchronized.

Tags: Firefox

Similar Questions

  • After that I changed the Duplex parameter on NIC's Service console, I am not able to connect the ESX host

    Hi all

    Please help solve my problem.

    After that I changed the Duplex parameter on NIC's Service console, I am unable to connect the ESX host. How can I reset the 100 MB NETWORK card duplex. Can someone help me please.

    Concerning

    Vijay

    Hello

    As the bulb you have two problems that are not related.

    (1) duplex setting, your switch and NIC must match. If one is assigned to auto-negotiation, then the other must be set to auto-negotiation. Personally, I tend to let auto-negotiation unless there is an absolute reason to spend. If you then turn on the both sides of the interface, the switch port and esxcfg-NICS allows you to change the duplex, etc.

    (2) passwords for root are not related to the network unless you have also run esxcfg-auth authentication remote.  The only time I saw what you have here is when the system is configured to try to authenticate remote and not locally.

    The two problems are fixable by booting into single-user mode, set the duplex and reset the password.

    Best regards
    Edward L. Haletky
    VMware communities user moderator
    ====
    Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
    Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

  • How to migrate the old Sync (Weave) / to the new synchronization service account login?

    I can connect fine here...
    https://account.Services.Mozilla.com/
    But before I did that, he said I should use this page if I FF29 or newer:
    https://accounts.Firefox.com/signin

    I tried to get into the u/n + pwd who still works, but it says that I have to use an email address.
    No idea what email address is associated with my account...
    But when I was logged on the former site of sync above, I noticed it says: "welcome, email address (disconnect).
    So I tried this email address + password at the new site, but still it did not work.

    Where from here?
    Note: as far as I can tell Sync works much less 30 ff itself (OS X).

    Thank you.

    It is now not very happy at all with the approach adopted, the old system of synchronization has been much better, to the Mozilla less could have kept indefinitely for users to read and write more technically, not to set a deadline for the complete destruction.

  • When you configure synchronization how sync manages information on two computers? It merges the information?

    When you configure synchronization how sync manages information on two computers? It merges the information?

    Hello!

    Yes, how Sync is that it brings together all the bookmarks and pushes them to all your devices. Same thing with the story.

    You will lose all the information in one of your computers.

  • What is lxcj_device in the configuration of the system in respect of services?

    I'm suspicious of devices that should not be on my computer because I've been hacked via emails before and I would like to know what this 'service' is listed in the Configuration of the system to Service lxcj_device the manufacturer title is not known.  Thank you.

    Programs from lx generally come from Lexmark. They start the name lx services? _device.

    Use services.msc to find where it starts from. It must be C:\Windows\System32\lxcjcoms.exe or similar. You can then navigate to this file, right-click, select 'Properties' and verify the Digital Signature.

  • F0169 (host name ESXi) service profile could not apply the configuration

    I just created a new vNIC on 2 of my new hosts. I created the pools MAC address before you start. As I create the vNIC I got the following error:

    Your changes:

    Created VNIC FTNNIC

    Create: network fault tolerance

    Fail the Configuration of:

    Profile service (ESXi host name) org-root-[(Server:sys/chassis-2/blade-8)]

    Failure reason: connection-investment

    There are not enough global resources

    Not enough available vNIC

    Are you sure you want to apply the changes?

    I click Yes, and then get F0168 error service profile could not apply the configuration?

    What I do wrong here and how to fix it?

    Can you please more information, for example

    -What type of Blade model, input-output adapter

    -Version UCS

    -ESXi version

  • NAC AD SSO error: could not start the SSO service. Please check the configuration.

    Hi, can someone please help me with a problem of SSO?

    I'm trying to start the SINGLE sign-on service, but when I try to update I get the error message: "error: could not start the SSO service.» Please check the configuration. »

    The announcement is a Windows 2008 Server Standard R2 (64-bit) running at a 2003 domain functional level. (several servers) with the deployment of the OOB

    I was unable to ping the advertising server CASE CLI, so I created a static route to the announcement on the server of the ANC, and after that I successfully of the NAC Server ping IP address of the AD. The nac_server.log when I try to start the SSO:

    [[email protected]/ * / _primary_ag ~] # ping 10.200.0.3

    PING 10.200.0.3 (10.200.0.3) 56 (84) bytes of data.

    64 bytes from 10.200.0.3: icmp_seq = 1 ttl = 128 time = 0,247 ms

    64 bytes from 10.200.0.3: icmp_seq = 2 ttl = 128 time = 0,232 ms

    -ping - 10.200.0.3 statistics

    2 packets transmitted, 2 received, 0% packet loss, time 999ms

    RTT min/avg/max/leg = 0.232/0.239/0.247/0.017 ms

    [[email protected]/ * / _primary_ag ~] # tail-f /perfigo/access/tomcat/logs/nac_server.log

    2012-07-27 17:20:39.079-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:20:39.079-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:20:39.080-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:20:39.080-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:20:39.080 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:20:39.080 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:20:39.081 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:20:39.081 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:20:39.081-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:20:39.081-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:20:41.776-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:20:41.776-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:20:41.777 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:20:41.777 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:20:41.777-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 1

    2012-07-27 17:20:41.777-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 1:DURATION = 0

    2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = casuser

    2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = casuser:DURATION = 0

    2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = nissin.com.br

    2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = nissin.com.br:DURATION = 0

    2012-07-27 17:20:41.779-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = NISSIN.COM.BR

    2012-07-27 17:20:41.779-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = NISSIN.COM.BR:DURATION = 0

    2012-07-27 17:20:41.779 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save

    2012-07-27 17:20:41.779 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save:DURATION = 0

    2012-07-27 17:20:41.780 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer

    2012-07-27 17:20:41.780 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer:DURATION = 0

    2012-07-27 17:20:58.605-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

    2012-07-27 17:20:58.608-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

    [2012-07-27 17:20:58.608-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

    [2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: removed socket: 173d72d [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=11093,localport=1099]]

    2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 0 DEBUG

    2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE DEBUG =]

    2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 0 DEBUG

    2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE DEBUG =]

    2012-07-27 17:21:18.610-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

    2012-07-27 17:21:18.613-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

    [2012-07-27 17:21:18.613-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

    2012-07-27 17:21:38.615-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

    2012-07-27 17:21:38.618-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

    [2012-07-27 17:21:38.618-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

    2012-07-27 17:21:41.794-0300 DEBUG Thread-246 com.perfigo.wlan.common.HttpClientResource - go to url https://10.200.48.100:443 / wlan/gss/GSSNotificationServlet ...

    [2012-07-27 17:21:41.813-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: added the socket: 1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]

    2012-07-27 17:21:41.814-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1

    [2012-07-27 17:21:41.814-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]

    2012-07-27 17:21:41.814-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOStatus

    2012-07-27 17:21:41.814-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOStatus:DURATION = 0

    2012-07-27 17:21:44.103-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:44.103-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:21:44.106 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 1

    2012-07-27 17:21:44.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:21:44.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:49.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:21:49.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:21:49.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:21:49.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:21:54.107-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:54.107-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:21:54.109 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:21:54.109 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:21:54.110 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:21:54.110 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:21:54.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:21:54.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:21:58.619-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

    2012-07-27 17:21:58.622-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

    [2012-07-27 17:21:58.622-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

    2012-07-27 17:21:59.109-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:59.109-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:21:59.111 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:21:59.111 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:21:59.112 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:21:59.112 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:21:59.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:21:59.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:22:04.111-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:04.111-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:04.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 1

    2012-07-27 17:22:04.113 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:04.113 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:22:04.114 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:04.114 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:04.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:04.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:09.115-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:09.115-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 1

    2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:09.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:09.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:14.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:14.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:22:14.117 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 1

    2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:14.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:14.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:22:17.017-0300 DEBUG RMI RenewClean-[10.200.2.103:1099] com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 2

    [[2012-07-27 17:22:17.017 - 0300 DEBUG RMI RenewClean-[10.200.2.103:1099] com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]]]

    [2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: socket: 59725 c added [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]

    2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 3

    [[[2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]], 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]]

    2012-07-27 17:22:18.624-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

    2012-07-27 17:22:18.627-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

    [2012-07-27 17:22:18.627-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

    2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:19.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:19.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:19.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:19.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:24.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:24.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:22:24.121 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:24.121 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:22:24.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:24.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:24.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:24.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:22:29.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:29.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:22:29.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:29.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:22:29.123 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:29.123 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:29.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:29.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    [2012-07-27 17:22:32.022-0300 RMI Scheduler (0) DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: removed socket: 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]]

    2012-07-27 17:22:32.022-0300 com.perfigo.wlan.ssl.SSLLog RMI Scheduler (0) DEBUG - RMISocketFactory:CACHED_SOCKETS_SIZE = 2

    [[2012-07-27 17:22:32.022-0300 RMI Scheduler (0) com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]]

    [2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: moved socket: 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]

    2012-07-27 17:22:32.022-0300 TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1 connection

    [2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]

    2012-07-27 17:22:32.022-0300 TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1 connection

    [2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]

    2012-07-27 17:22:34.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 1

    2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:22:34.124 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:34.124 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:22:34.125 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:34.125 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:34.125-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:34.125-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    [[email protected]/ * / _primary_ag ~] #.

    Thank you

    Moises,

    I wanted to know if you have followed these steps:

    http://www.Cisco.com/en/us/docs/security/NAC/appliance/configuration_guide/49/CAs/s_adsso.html#wp1266896

    Thank you

    Tarik Admani
    * Please note the useful messages *.

  • wcmUrl cannot run the "evaluateScriptEx" of service method. The server script expression evaluates error. No path required for the ssWeblayoutUrl parameter.

    Hi all

    I have a data file where there is a wcm:element like below

    < wcm:element = "linkUrl" name > [!-$wcmUrl ('resource', ")-] < /wcm:element>

    So, I get an exception to content server


    Event generated by the user 'sysadmin' to host 'CIS '. Could not generate the HTML page. Unable to evaluate the function. Error running system. wcmUrl cannot run the "evaluateScriptEx" of service method. The server script expression evaluates error. No path required for the ssWeblayoutUrl parameter. [Details]

    An error has occurred. The stack trace below shows more information.

    !csUserEventMessage,sysadmin,CIS!$!csPageMergerUnableToGenerateHtmlPage!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!csUnableToExecMethod,evaluateScriptEx!csDynHTMLServerScriptEvalError!$Missing required path parameter for ssWeblayoutUrl.

    intradoc.common.ServiceException:! csPageMergerUnableToGenerateHtmlPage

    at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)

    at intradoc.server.Service.buildServiceException(Service.java:2271)

    at intradoc.server.Service.createServiceExceptionEx(Service.java:2265)

    at intradoc.server.Service.createServiceException(Service.java:2260)

    at intradoc.server.Service.buildResponsePage(Service.java:1314)

    at intradoc.server.Service.doResponse(Service.java:2076)

    at intradoc.server.FileService.doResponse(FileService.java:1469)

    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:802)

    at intradoc.server.Service.doRequest(Service.java:1890)

    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)

    at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)

    at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)

    to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

    Caused by: java.io.IOException:! csDynHTMLSystemExecutionError, csDynHTMLReportMsgFunction! $wcmUrl

    at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)

    at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)

    at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)

    at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)

    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)

    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)

    at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)

    at intradoc.common.DynamicHtmlMerger.outputDynamicHtmlPage(DynamicHtmlMerger.java:2007)

    at intradoc.server.Service.buildResponsePage(Service.java:1267)

    ... more than 10

    Caused by: intradoc.common.ServiceException:! csUnableToExecMethod, evaluateScriptEx

    * ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $

    ! csDynHTMLNoStack! $

    !csDynHTMLErrorMessage,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents//mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!$

    -& #62;      & #60; WCM:element name = "linkUrl" & #62; [(--\!--$wcmUrl('resource'\, '')]; & lt; / span & gt; & #60; / wcm:element & #62;

    in sitestudio. SSClassHelper.invoke (unknown Source)

    in sitestudio. SSScriptExtensions.evaluateIncludeXmlEx (unknown Source)

    in sitestudio. SSWCMScriptExtensions.resolveWcmUrl (unknown Source)

    in sitestudio. SSWCMScriptExtensions.evaluateFunction (unknown Source)

    at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)

    at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)

    ... more than 17

    Caused by: java.io.IOException:! csDynHTMLServerScriptEvalError

    at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)

    at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)

    at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)

    at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)

    at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)

    at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)

    at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)

    at intradoc.common.DynamicHtmlMerger.executeDynamicHtmlToWriter(DynamicHtmlMerger.java:2060)

    at intradoc.common.DynamicHtmlMerger.evaluateScriptToWriter(DynamicHtmlMerger.java:1872)

    at intradoc.common.DynamicHtmlMerger.evaluateScriptNoErrorHandling(DynamicHtmlMerger.java:1836)

    at intradoc.common.DynamicHtmlMerger.evaluateScriptEx(DynamicHtmlMerger.java:1794)

    at sun.reflect.GeneratedMethodAccessor500.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    in sitestudio. SSClassHelper.invokeRaw (unknown Source)

    ... 23 more

    Caused by: intradoc.common.ServiceException: path of access is required for ssWeblayoutUrl parameter.

    * ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $

    ! csDynHTMLStackElementWithFilename,wcmUrl,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents/generalmodule/mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!$

    ! csDynHTMLServerScriptEvalError

    in sitestudio. SSScriptExtensions.evaluateFunction (unknown Source)

    at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)

    at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)

    Therefore I don't see the placeholder to correct the link. How can I fix this, or at least manage the display of the placeholder.

    Concerning

    I don't think the resources without the dDocName specification will work (for example [!-$wcmUrl ('resource', ")-]).

    At some point, the code path probably leaves the SiteStudio component and goes back to the core code WebCenter content to fetch the revision. It seems that it is where he meets a problem (impossible to find the last out for review).

    If you turn on additional detailed complete tracking for site *, file * and system * this gives you a clues?

    Jonathan

    https://jonathanhult.com

  • Problems with the configuration of the ntp service application

    Hi people,

    I'm stuck at the configuration of the ntp service to start by default on an esxi server via perl.

    That's what I'm doing:

    My $hostServiceConfig = new HostServiceConfig (serviceId = > 'ntpd', startupPolicy = > 'on');

    My $hsca = [];

    Push (hsca @$, $hostServiceConfig);

    My $hostConfigSpec = new HostConfigSpec (service = > $hsca);

    My $taskRef = $hostProfileManager-> ApplyHostConfig_Task (host = > $host, context = > $hostConfigSpec);

    When I ask the status of the command fails:

    SOAP fault:

    -----------

    Error string: the operation is not allowed in the current state.

    Lack of details: InvalidState

    I guess I'm just missing some small detail. Maybe someone sees my mistake right now :-)

    Hi eholtz,

    Here's the code I added to hostServiceManagement.pl (IIRC!):

    1. check the boot strategy:

    sub checkServiceEnabled {
        my ($serviceSystem,$service) = @_;

        my $services = $serviceSystem->serviceInfo->service;

        foreach(@$services) {
                if($_->key eq $service) {
                        return $_->policy;
                }
        }
        return 0;
}

    2 then disable the service:

    my $policy = &checkServiceEnabled($serviceSystem,$service);
if($policy eq "on") {
        eval {
                $serviceSystem->UpdateServicePolicy(id => $service, policy => "off");
                print "\t" . color("cyan") . "Successfully disabled $service\n" . color("reset");
        };
        if($@) {
                print "\t" . color("red") . "Error: Unable to change startup policy on service \"$service\" due to: " . $@ . color("reset") . "\n";
        }
}elsif($policy eq "off") {
        print "\t" . color("yellow") . "$service is already disabled" . color("reset") . "\n";
} else {
        print "\t" . color("red") . "Error: Unknown startup policy \"$policy\"" . color("reset") . "\n";
}

    And to allow:

    my $policy = &checkServiceEnabled($serviceSystem,$service);
if($policy eq "off") {
        eval {
                $serviceSystem->UpdateServicePolicy(id => $service, policy => "on");
                print "\t" . color("cyan") . "Successfully enabled $service\n" . color("reset");
        };
        if($@) {
                print "\t" . color("red") . "Error: Unable to change startup policy on service \"$service\" due to: " . $@ . color("reset") . "\n";                     }

}elsif($policy eq "on") {
        print "\t" . color("yellow") . "$service is already enabled" . color("reset") . "\n";
} else {
        print "\t" . color("red") . "Error: Unknown startup policy \"$policy\"" . color("reset") . "\n";
}

    P.s.: based on your current score, you should be able to PM me now...

    Kind regards

    --

    Thomas

  • Could not send data to configuration ldap to libOvd for the instance of service 'idstore.ldap' - 'socketOptions' element should not

    Hello

    I have an installed WebLogic 10.3.6 with ADR 11.1.1.6 cluster.

    Everything worked fine until recently when I installed Web Tier 11.1.1.7 and associated with the instance of OSH with my WebLogic AdminServer EM.

    Now I can't start my managed servers, receive the below error message.  I tried to add "-Djava.security.debug = jpspolicy" to JAVA_OPTIONS strings in startManagedWeblogic.sh, but they do not get more information.

    JAVA_OPTIONS = "-Djava.security.debug=jpspolicy-Dweblogic.security.SSL.trustedCAKeyStore="/u01/app/oracle/Middleware/wlser\

    "Ver_10.3/Server/lib/cacerts" ${JAVA_OPTIONS} "

    Any advice would be appreciated.

    # < 26 June 2013 16:22:23 UTC > < critical > < WebLogicServer > < gds-dev-mt-1 > < ManagedServer_1 > < main Thread > < < WLS Kernel > > <><>< 1372263743069 > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed due to the exception, see exception stack trace or the log file of the server root. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

    weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)

    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)

    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

    at weblogic.security.SecurityService.start(SecurityService.java:141)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: oracle.security.jps.JpsRuntimeException: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

    to oracle.security.jps.internal.policystore.PolicyDelegationController. < init > (PolicyDelegationController.java:167)

    to oracle.security.jps.internal.policystore.JavaPolicyProvider. < init > (JavaPolicyProvider.java:369)

    at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)

    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)

    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)

    at java.lang.Class.newInstance0(Class.java:357)

    at java.lang.Class.newInstance(Class.java:310)

    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)

    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1024)

    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:879)

    at weblogic.security.SecurityService.start(SecurityService.java:142)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Layer Web 11.1.1.6 does not exhibit this problem.  Sex Web 11.1.1.7 patched the oracle_common and I feel is not compatible with ADR 11.1.1.6 or 11.1.1.7

  • Unable to access the configuration of Secure Token Service in oamconsole screens

    We have OAM and installed on 5.7 OEL (11.1.1.5) STS. OAM works fine URL protection via webgate etc. We want to explore STS. However, we are not able to access the related display in oamconsole.

    Here are the errors when you click either "System Configuration/Common Configuration/Available Services" or "Service token System Configuration/Security Token Service/security settings".

    ---
    Operation of the MBean access denied. MBean: oracle.oam:type = Config operation: retrieveMapPropertyArray (java.lang.String) Details: access denied. View of the roles: Admin, subject to execution: principals = [oamadmin, OAMAdministrator]
    Error
    Access denied. View of the roles: Admin, subject to execution: principals = [oamadmin, OAMAdministrator]
    ---

    Make sure that the user you do login with is a member of the Administrators group on the LDAP backend. The name of the right-wing group's directors, not admin.

    André.

  • Error 25011. Unable to configure the host Agent Service, and then if I try to start, shortcut missing serverui.url

    Hello

    I tried to get VMWare Server 2 to settle, (Windows Vista Business, SP1, Internet Information Services running, SQL Server 2005, 2008...

    and everything I try, I get error 25011. Cannot configure the host Agent Service.

    (The old Console server ran very well, only a few months ago, I can not connect with it to remote machines)

    Any suggestions would be welcome!

    Thank you

    Janos

    Hello

    Try:

    1 uninstall WMServer (you can clean the reg file)

    2. stop the IIS services

    3. install VMServer

    4. start IIS if you need it.

    J.

    ---

    If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

  • Oracle 11G of OSB. Unable to find the Page of Configuration Oracle Service Bus.

    Hi all

    Sorry for the silly question apparent but I am a student and learning product.

    I OSB demand to 11G installed and running with a service proxy and routing work. The Oracle ESB documentation http://download.oracle.com/docs/cd/E21764_01/doc.1111/e15866/ui_ref.htm#i1327746 to Chapter 4.4.2 Oracle Service Bus Configuration Wizard new project of
    Use this wizard to create a configuration Oracle Service Bus project. For the configuration options, see Section 4.4.3 "Page of Configuration of Oracle Service Bus.
    4.4.3 oracle Service Bus Page of Configuration.

    I don't see the configuration page from anywhere in the left pane of the console. Am I missing something? The project creation works well but I do not see the Wizard configuration.
    Thank you.
    Concerning
    Salvatore Ilardo

    you will see that the wizard project in your eclipse ide tool configuration.

    When you are in the perspective of the Oracle Service Bus, create new project > Oracle Service Bus. and there you have this option.

  • Try to get the input parameter of a web service Yanick based on the value of the table

    Hello-

    I am new to ADF and Jdev 11 g (I'm a developer of forms). I had created a web service from a db stored pl/sql package. I can run a function with a parameter of the ADF faces.

    Instead of the input being entrable user parameter, I want to be based on a selected value of ADF table column. How to correlate the value of the selected row in the column as an input function parameter?

    I played with an ADF output text based on the table column ADF PartialTriggers the value set for the ADF... table that updates the output text based on the selected column. Can I use some kind of partial trigger on the input parameter?

    From a point of view of forms, I am looking for ownership of "Copy Item value" :)

    Two options:
    Declarative in tab link, as shown here:
    http://blogs.Oracle.com/Shay/2009/07/java_class_data_control_and_ad.html
    (its a method POJO but should be the same for a Web Service invoke).

    Or via code in your backing bean:
    http://blogs.Oracle.com/Shay/2009/06/setting_parameter_value_for_bi.html

  • How can I access apex_admin by using the configured services to oracle rest glassfish

    am new to APEX so please forgive my ignorance.

    I'm trying to access apex_admin to start to create workspaces. but can't seem to get the screen to apex_admin

    try to access using

    ADR / http://hostname:8080 / apex_admin

    We get the message that installation has not yet been configured...

    Hi Celtpinoy,

    It is a popular problem. Him more often cause one or the ORDS.war is not the same as the settings of the current database using the

    > java-jar ords.war of installation

    OR the configuration directory is not indicated on the right directory using

    > java-jar ords.war configdir

    I suggest that check it out you.

    Kind regards

    Benjamin.

Maybe you are looking for

  • Satellite Pro 6100: cursor disappears in the upper right or lower left corner

    I guess because of the setting based on the device keyboard pointer cursor often disappears and is difficult to return to the screen. It is not possible to disable in the bios.Anyone have a suggestion how to disable this device pointer? I saw that th

  • I lost the office and all programs-system restore will not work. Now, all I have is a blue screen.

    Original title: I lost the office and all programs-system restore won't work I don't know what happened, now all I have is a blue screen, if I click on programs it says 'empty' can not get on anything

  • HP scan on Mac

    I have an all-in-one, purchased B110A 5 months ago. I asked compatible Mac and the salesman who sold me the B110A read the packaging to confirm that it is indeed Mac compatible. The problem with the B110A, is that it's scanning is no longer under OS

  • mail error ID: OX80070005

    Excuse my English, I tried to send some pictures to a relative, and the last two days, Windows live mail does not work.  I get error massage ID: OX80070005.  I tried set-aside education aid in the mail and no luck. Please help Roberto

  • Wireless does not connect. Possible culprit Windows Mobility Center.

    I lost the signal on my laptop after I opened and had no connection available. Reader is up-to-date and that windows is unable to detect a problem. It runs at max power. So, I check the Windows Mobility Center. That is to say wireless is disabled. So