Unable to access the configuration of Secure Token Service in oamconsole screens

Similar Questions

• WRt160N is unable to access the configuration screen after the demotion to a lower version

  I just bought WRT160-V2 two weeks ago. The connection kept down all the minutes. After reading some threads in this forum, discovered that I was not alone. A thread under the instructions of a http://audipages.com/router/ site. So I upgraded my router for firmware v2.0.0.02 build 008. The connection is much more flexible. However, Setup screem has not come back. Now, I am not able to access the configuration with 10.10.10.1 screen. Help, please. Thanks in advance!

  After an update of the firmware, you must reset the default router, and then configure the router again from scratch.  If you have not done this since your last update of the firmware, please do it now and see if it solves your problem.  If you have saved a router configuration file, DO NOT use it.

  To reset your router prress the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• Unable to access the configuration of the EA6900v1.1 web page

  Hi guys,.

  I bought a second hand ea6900, the guy had its ssid wifi in there, so I took over and reset immediately.

  to reset that, I like the reset button, waited for the flash logo and then become solid.

  I can connect to it wired and wireless, however, when I type in 192.168.1.1. He takes me to smart wifi configuration page, that requires the internet connection or the router access password, I tried admin, password, empty, etc. non of them work.

  I plugged a cable to the internet port of my router/box of fiber, and it does not connect to the internet either.

  I also tried to update the firmware, http://www.linksys.com/us/support-article?articleNum=159332

  using the management http://www.linksys.com/nz/support-article?articleNum=140001 mode

  or TFTP method http://www.linksys.com/nz/support-article?articleNum=137928

  the two did not work, he brings me to the page of the wifi chip, when I tried to access the management mode,

  and it's the same thing when I press reset for a minute. always take back me to the wifi secruit and need this password.

  These items are Linksys live chat, after they discovered that his warranty has expired

  anyone would be able to help?

  Thank you

  Adam

  OK... This is simply ridiculous. I use IE to connect with admin, chrome does simply not work.

• Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

  Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• BlackBerry Bold 9700 smartphones - unable to access the e-mail account configuration

  9700 OS 6 on ATT

  The problem: the email accounts through the icon of the installer cannot access.  Configuration - mail accounts.  I can highlight the e-mail accounts in the Setup menu, but can't open it.  I can open all other options in the Setup menu

  I had this 9700 for 2 years and my configuration of e-mail account and operational full-time.  My email has been hacked and I fixed that on my desktop CPU but my 9700 will still not receive or send emails.  I did the following:

  1. Reset the battery removal
  2. Deleted service books

  Everything I could find on correcting my email on the 9700 account is that I have to reset my email from my 9700 account information.  Unfortunately, I can not access account configuration menu email form.  Help please.

  Hello Marshall

  Welcome to the Forums of the BlackBerry Support

  This is the KB that deals with this error:

  KB33220 : cannot access the configuration of Messaging Application or connect to BlackBerry ID on a BlackBerry Smartphone services.

   

  Or you can use your BIS Carrier site to add / modify your e-mail account or use your BlackBerry browser, go to www.blackberry.com/integrate to add / change an e-mail account.

• remote VPN and vpn site to site vpn remote users unable to access the local network

  As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

  The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

  ASA Version 8.2 (2)
  !
  host name
  domain kunchevrolet
  activate r8xwsBuKsSP7kABz encrypted password
  r8xwsBuKsSP7kABz encrypted passwd
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  PPPoE client vpdn group dataone
  IP address pppoe
  !
  interface Ethernet0/1
  nameif inside
  security-level 50
  IP 192.168.215.2 255.255.255.0
  !
  interface Ethernet0/2
  nameif Internet
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  management only
  !
  passive FTP mode
  clock timezone IST 5 30
  DNS server-group DefaultDNS
  domain kunchevrolet
  permit same-security-traffic intra-interface
  object-group network GM-DC-VPN-Gateway
  object-group, net-LAN
  access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
  tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 Internet
  IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  enable ASDM history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  AAA authentication enable LOCAL console
  LOCAL AAA authentication serial console
  Enable http server
  x.x.x.x 255.255.255.252 out http
  http 192.168.215.0 255.255.255.252 inside
  http 192.168.215.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dynmap 65500 transform-set RIGHT
  card crypto 10 VPN ipsec-isakmp dynamic dynmap
  card crypto VPN outside interface
  card crypto 10 ASA-01 set peer 221.135.138.130
  card crypto 10 ASA - 01 the transform-set RIGHT value
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  the Encryption
  sha hash
  Group 2
  lifetime 28800
  Telnet 192.168.215.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  management-access inside
  VPDN group dataone request dialout pppoe
  VPDN group dataone localname bb4027654187_scdrid
  VPDN group dataone ppp authentication chap
  VPDN username bb4027654187_scdrid password * local store
  interface for identifying DHCP-client Internet customer
  dhcpd dns 218.248.255.141 218.248.245.1
  !
  dhcpd address 192.168.215.11 - 192.168.215.254 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Des-sha1 encryption SSL
  WebVPN
  allow outside
  tunnel-group-list activate
  internal kun group policy
  kun group policy attributes
  VPN - connections 8
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel
  kunchevrolet value by default-field
  test P4ttSyrm33SV8TYp encrypted password username
  username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
  username kunauto attributes
  Strategy Group-VPN-kun
  Protocol-tunnel-VPN IPSec
  tunnel-group vpngroup type remote access
  tunnel-group vpngroup General attributes
  address pool VPN_Users
  Group Policy - by default-kun
  tunnel-group vpngroup webvpn-attributes
  the vpngroup group alias activation
  vpngroup group tunnel ipsec-attributes
  pre-shared key *.
  type tunnel-group test remote access
  tunnel-group x.x.x.x type ipsec-l2l
  tunnel-group ipsec-attributes x.x.x.x
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
  : end
  kunauto #.

  Hello

  Looking at the configuration, there is an access list this nat exemption: -.

  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

  But it is not applied in the States of nat.

  Send the following command to the nat exemption to apply: -.

  NAT (inside) 0 access-list sheep

  Kind regards

  Dinesh Moudgil

  P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

• I'm unable to access the internet with my CV due to the reception of the following - xp Antispyware 2011 alert. How can it be deleted?

  I'm unable to access the internet with my CV due to the reception of the following - xp Antispyware 2011 alert.  How can it be deleted?  I have McAfee Total Protection Plus, but which apparently does not work.  Help, please.
  This problem existed for about a week.

  Hello

  ·         What is the exact error that you are experiencing?

  ·         How long have you been faced with this problem?

  ·         Remember to make changes to the system?

  It seems that your system is infected by a virus or malware. I suggest you to run a scan on the system online to make sure that your system is free from viruses and malware. Click on the link below.

  http://OneCare.live.com/site/en-us/default.htm

  Also, I suggest you to download and install Microsoft Security Essentials on the system. Click on the link below.

  Microsoft Security Essentials

  http://www.Microsoft.com/security_essentials/

  I suggest install Malicious Software Removal Tool from the link below and then install it on the system and are looking for malware.

  Malicious software removal tool

  http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

• After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.

  If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• Firefox is unable to access the internet

  Hello

  Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.

  Best regards
  Joel Hedestig

  You can try using the beta version of firefox mobile?

  https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta

• MY mail server hardisk full so cannot start services & also unable to access the mail server

  I have the server messaging, but Hardisk ful then failed to start Services and also unable to access the e-mail mail server troubleshooting steps.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• The system is unable to complete the update of security for Windows XP (KB2661637).

  Original title: update security for Windows XP (KB2661637)

  The system is unable to complete the update of security for Windows XP (KB2661637).  How can I get my system to accept the update?

  Hi Joseph,.

  You receive messages or error codes?

  You can reset the default Windows Update components and check if you can install the update.

  How to reset the Windows Update components?

  You can also try to download the standalone update package and check.

  Update security for Windows XP (KB2661637)

• Unable to access WRT1900AC configuration page when it is configured as AP only

  Problem: cannot access configuration page of WRT1900 or by using the linksyssmartwifi or the affected DHCP an address

  Configuration: I have a domain Active directory to manage all devices in my house and customers. MY ISP is uVerse.

  I first installed uVerse and the WRT1900 as being generally configured (uVerse providing DHCP and DNS), my field devices could not resolve the local my AD server domain name. To resolve this problem, I set up my server AD 2003 to act as a router, Server DNS and DHCP (see diagram below).

  In this configuration, all connected via LAN or WiFi devices can see internet and other LAN/WiFi field devices connected.

  The only problem I have is that I can't access the configuration page of WRT1900 or by using the linksyssmartwi or the address assigned DHCP

  The 2003 Server provides DHCP to all devices in the LAN attached including WiFi LinkSys attached devices

  Server 2003 provides DNS name resolution

  

  in my case it seems that the opposite was true.  I reset my router, which is configured as a LAN Gateway and now I can access limited menu.  most applications have disappeared and I can't do basic as things even see who is connected.  Almost everything that is available is to put the passwords for wifi access and the router itself.

  It will not even to change channels or wifi connection protocols.  Shame on Linksys for not properly support their interface.

  The good news is the still phone app works where some of the above items can still be configured (for example, you can configure at least most of the wifi settings)

  Thanks for your help!

• E2500: 'the connection to the 192.168.1.1 was interrupted." When you access the configuration page.

  Trying to access the configuration page, 'the connection to the 192.168.1.1 was interrupted."  I'm wired into the router.  Any idea of what is the cause?

  Ugh, I'm stupid... I was using the button in the back instead of the reset button on the bottom.  Thanks for the tip-off that the reset method should have worked.