Satellite Pro 6100: cursor disappears in the upper right or lower left corner

Similar Questions

• Satellite Pro 6100: cursor moves out of control on the screen

  Hey guys,.

  I'm seriously going crazy right about now... my problem is the following:

  I have a Toshiba Satellite Pro 6100, Windows XP Professional with SP2, memory: 512 MB.

  About two weeks ago my cursor began to move up and down whenever I pressed the space bar. It has gotten worse since. My cursor moves out of control across the screen (there are usually in the upper right or lower left) and I can not recover. I know for a fact that it has nothing to do with my external mouse (optical), because this problem also occurs when I use my pointing device. Even in safe mode.

  The thing I've tried:
  Ran Spybot: Search and Destroy
  Ran Adaware
  Xoftspy RAN
  A ran Symantic Antivirus 10 (complete analysis of the system in safe mode)
  New keyboard
  New motherboard

  Nothing helps. I'm this close to format my pc. Does anyone have a suggestion of what to do?

  Thanks in advance!

  Hello

  I put t he understand. You have changed the keyboard and the motherboard, but you did not recover the OS with the Toshiba Recovery CD.
  The first procedure that you should do is the new installation of the OS before you change or replace anything on the laptop.

  Unfortunately, it is not easy to say why it occurs. A friend of mine has a similar problem with the cursor. The cursor has jumped on the screen and it was not possible to open applications. It has (or service) resolved with the replacement of keyboard.

  If the new installation OS doesn't fix this strange cursor, so I recommend you contact Toshiba.

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Satellite Pro 6100: black border to the right of the screen

  After a new installation with windows xp when I star tup I have a black border (1.5 cm) to the right of my screen.
  After the beginning and the end of the screen saver, I have a full screen.
  but when my laptop started again I have this black border again.
  I have a satellite Pro 6100.

  Management information
  System
  Model = laptop
  Manufacturer = TOSHIBA
  Serial number = 0000000000
  UUID = ffffffff-ffff-ffff-ffff-ffffffffffff
  BIOS Version = Version 1.90

  OPERATING SYSTEM
  Caption = Microsoft Windows XP Professional
  Version = 5.1.2600 Service Pack 2

  CENTRAL PROCESSING UNIT
  Index = 1
  Manufacturer = GenuineIntel
  Name = Mobile Intel (r) Pentium (r) 4 - M CPU 1.70 GHz
  Version = model 2 Stepping 7
  Max clock speed = 1694
  Socket designation = uFC - PGA Socket

  Display
  Index = 1
  Horizontal resolution = 1024
  Vertical resolution = 768
  Chip Type =
  The RAM size =

  Very strange problem! Can you please tell us more about this problem? I assume that you have installed the OS on your own. Since when you noticed this weird display problem?

  Have you noticed this immediately after installing the OS (without driver)? Did you install the display driver on Toshiba support page?

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• No Satellite Pro 6100 no response from the screen

  Can anyone help?

  My 6100 Pro Satellite lit last night then automatically went into hibernation, despite being connected. Now when I turn it on there is no response from the screen, but if I plug a monitor to the laptop, the screen works (as long as I start in safe mode)

  Can anyone help?

  Hi Simon

  Disconnect all cables from the laptop and remove the battery.
  Wait a moment more (20 min) and reconnect the battery and the AC adapter.
  Then check if the laptop turns on and if the display works fine

  Good luck

• Satellite Pro 6100: cursor mouse jumps around

  The mouse internal nipple on my laptop does not work, it jumps around in all directions. I tried to replace that with a USB mouse that works fine except that I hit the space bar, then the cursor will jump on the side of the screen.

  It will then continue to scroll on the side of the screen, even if I bring him back. Looked at a lot of forums and it looks like a common fault but not a miracle.

  Help, please

  Hello

  I put t think that it s a common fault. It could just be the keyboard malfunctioned.
  One of my friends has a Tecra, and the cursor of the mouse jumped crazy on the screen.
  It was not possible or very difficult to open all the windows or click on the icons.

  The service provider has changed the entire keyboard and it's a solution.
  Perhaps you will also need a replacement.

  But what happens when allows you to disable the touchpad with FN + F9 function? Make cursor jumps when you use USB mouse?

• Satellite Pro 6100 very slow during the installation of Windows XP Home edition

  Hello

  We have installede Windows XP from our CD orig., XP is running very slowly and the mouse freezing of minute-to-minute. We can install Windows 2000 and it works perfectly. Try a new HD with the same problem, it has 512 MB of ram.

  Hello

  As far as I know this device is supported for Windows 2000 Professional and Windows XP Professional. Is there a similar situation when you use the original recovery Toshiba WXP Pro media?

  In fact, do you have a?

  By the way: I hope you're talking about the new installation without specific or additional preinstalled software you need!

• Satellite Pro 6100: which drive and the connection is supported - master, slave and CSEL?

  Hello

  I want to install a Pioneer DVR - K14L DVD burner.
  After installation, the notebook show me a
  error during initialization.

  It is possible to use this type of DVD Slimline burner?
  What kind of modus is important (master, slave, or CSEL)?

  Thank you and

  Best regards
  oelauge

  Hello

  I guess you get an IDE # 1 error message. Am I wrong?
  The fact is that not all readers are compatible with laptops.
  I don't know what parameters should have the caught player supported. But I assume that it might be a CSEL.
  However, I found this DVD - RW drive that must be compatible; the reference is P000366780
  http://www.getpartsonline.com/p000366780.html

  But unfortunately, there is nothing on the assignment of pins and settings.
  If you want to be sure of devices supported on your laptop computer at 100% so you should ask the Toshiba service partner in your country for details

• Satellite Pro 6100 does not start - power light flashes

  Hello

  I have a Satellite Pro 6100 when I press the power button and HDD lights up briefly then powerlight blinks.
  It seems to Flash a pattern: on (2 sec) flashes (2 seconds) then off (about 8 times)

  What he told me? No fan, no display no hardrive is active.
  Food is ok because it load battery.
  I bought it as it would be something easy to fix ideas?

  Hello

  It sounds bad
  Generally, the power led will blink due to a malfunction of the equipment.
  The LED provides a microcode and only the technician can read this code.
  A common user is not able to read.

  Maybe you'll be able to read this code, but you won't find any description about the meaning of the code.
  I recommend you contact the technician in your country

  But try this:
  Remove the battery and unplug the AC adapter.
  Wait severla times and then plug in the battery and plug in the AC adapter.
  If this does not help, you have aks, a complementary technician...

• Satellite Pro 6100 turns itself on a

  Hello

  I have laptop Satellite Pro 6100 who recently had the idea of turning on. It may be ok for 30secs or 3 hours.

  Any ideas if there are common faults with this model or if it is difficult to fix. Also im going to sell it fixed or not with a canon printer.

  No idea how much it is worth.

  Thank you

  Common faults? Hey Buddy this series is an oldie and to me, it looks like a problem that occurs because of the long duration of use.

  Have you tried to reinstall the OS? This should be the first step!
  He must know if its software or a hardware issue!

  If the same will occur after the installation of the new operating system then the problem might be related to overheating.
  Could the laptop shuts down automatically due to a temperature inside the laptop. Maybe a debris and dust affect the butcher of modules cooling, fans and, therefore, the machine cannot be properly cooled.
  In this case, you must clean the fans.

  However the RAM a malfunction could cause the problem too, so as you can see s not easy to say what s wrong

• Satellite Pro 6100 - battery icon indicates 0% and courier mouse disappears

  Hi all

  I'm new to this so hope I'm posting in the right place.

  I have the laptop above Satellite Pro 6100 and am having some problems that I hope that you guys may be able to help me with.

  The first problem is that the battery is fully charged, but the icon on the screen says 0%.
  He fled feeding okay and if you disconnect battery lasts for all time and a half.
  If I try to defrag it does not have enough power?
  So I have to defrag in safe mode.

  The other problem is that the mouse disappears off the coast of the right side of my screen and it takes forever to find him!

  Would appreciate some advice or solutions like like the laptop and not really wanted to get a new one at the moment.

  Oh am running windows at home.
  Thanks in advance.

  Eve x

  Update the BIOS and set the default values.

  You could try reinstalling the common Modules for Toshiba and energy savings.

  If all else fails, there is the opportunity to back up your data and run recovery. If it happens again on a new installation of Windows, it may be a hardware problem.

• Satellite Pro 6100 turns off when I connect the power adapter

  Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it self
  Any ideas would be appreciated

  see you soon

  Hello

  You use original Toshiba AC/DC adapter or another?
  What happens if you connect the AC/DC adapter, while the laptop is turned off?

  It s really strange problem, but I think that is s TI associated with AC/DC adapter or the motherboard itself

• Install the new hard drive on Satellite Pro 6100

  Hello

  I have the Satellite Pro 6100 and the hard drive has failed. Bought a new hard drive but have no idea where to begin to install it. Also, I have the product key for windows xp pro, but don't have a disc. Is there a way to get around get one, or someone has any ideas please?

  Thank you

  Michelle

  Hmmmm... It's very strange that you n t have idea how to start. Throughout history, there are only two options:
  -for the installation of an operating system you can use the original Toshiba Recovery disk that came with this laptop. If you n t have it then
  -use the Microsoft installation for the installation of the OS disc. All the drivers, tools and utilities must be installed Additionally one by one. Each of them you can find on Toshiba download page under http://eu.computers.toshiba-europe.com > support & downloads

  Please note: the product key at the bottom belongs to original recovery image so you probably won't be able to use it for the activation of the operating system.