Topic rejected?

Similar Questions

• V1.0.5.64 official F/W 2.4 Ghz cannot connect, rejects P / w.

  Just noticed this. Works fine since I installed it during the last Beta (. 62) and reset and Home settings.

  Last night a friend came to an end and tried to connect to the 2 .4GHz SSID, rejected for bad P / w.

  [IP DHCP: (192.168.1.6)] at MAC address 54:4E:902:F1: CC, on Friday, may 27,2016 20:31:53
  
  [WLAN access denied: incorrect security] Mac 54:4E:902:F1: CC, on Friday, may 27,2016 20:30:50

  Correctly plugged right after the band 5 GHz...

  Check this morning, NO devices on the 2.4 Ghz band? Seals devices see the NONE on 2.4 Ghz:

  

  Access control is too weird:

  

  Kind of shows alone is on the 5 GHz band? No indication as to my friends iPhone connected, but maybe I should have AC, I forgot?

  Don't have time to test now, but goes further and report. Will force and iPad 2.4 Ghz and see what happens?

  OK, it seems to work FINE now? Now that I think back to this topic last night I verbally gave the password and said it was untrue. I got the iPhone and he entered myself with the same result? Then, I connect to the 5 GHz band. I wonder why the newspaper showed NO 2 breaks down, only?

  Anyway I have just my iPad has left the 5 GHz for the 2.4 Ghz band and connected with the stored password. So I "fogot" as the network and it turn on automatically to the band of 5 GHz (correctly). I then MANUAL chose 2.4 Ghz SSID and enter the password and it connected? I don't know what happened last night.

  The devices attached now (compared to front above) is correct:

  

  The ACCESS CONTROL list (it is NOT enabled) however still shows the SSID on the Wireless for the first unit, not all wireless devices? Does?

  

  I was wondering, but for now, it seems to work correctly? I did NOTHING to the router, it left as it was last night. Only connected this PC and iPad to router using engineering via a browser on each. iPad engineering is of course open and when I returned to the PC correctly stated only was able to connect, I wanted to connect and drop the other user I did.

• Error, one of the accounts on Outlook Express' there was a problem connecting to your e-mail server. Your password was rejected"

  Original title:. Outlook Express 6

  I have Outlook Express 6 for my email and I have two accounts.  A single account sends and receives the OK, the other account pops up a window with the username and password already filled, I click OK and it keeps jumping until I got close this window and then the error message comes up: there is a problem connecting to your e-mail server. Your password was rejected. Account: 'POP3.gmail.com', server: 'POP.gmail.com', Protocol: POP3, server response: '-ERR [AUTH] username and password not accepted.', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92 is there anyone who can give me a simple solution to this problem?  Thank you.

  1. This account has already worked in OE?
  2. Tools | Accounts | This email account | Properties | Servers tab. Is unchecked connection using secure password authentication and my server requires authentication checked?
   
   
  Check your settings.
   
  1: enable POP in your Gmail account:
  http://mail.Google.com/support/bin/answer.py?answer=13273
   
  2: configuration of your e-mail to Gmail client: Outlook Express and Outlook 2002:
  http://mail.Google.com/support/bin/answer.py?answer=13276&topic=1556 
   
  Configure your Outlook Express client to work with Gmail:
  http://mail.Google.com/support/bin/answer.py?answer=76147

• Advice of rejected messages not sent by me originally - multiple shipments

  I get notification of messages rejected and delayed (sometimes in the Inbox and, sometimes, as spam) was sent by me. There are many examples, sometimes 500-600 at a time. I never sent emails to this volume and have no knowledge of any of the recipients. I deleted them without opening them (some come with attachments, again without opening it), which is very time consuming. How to prevent the other tips of this kind without changing my e-mail address?  Unwilling to do this, like so many authentic messages will not materialize, not to mention the time involved informing real senders.

  Any help would be greatly appreciated - ongoing since 4-5 days now.

  Hello

  Please REMOVE my answer as the answer.

  Only mark answers as answers if they resolve the problem.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  As you use Windows Mail, have you contacted your ISP (Internet Service Provider) to this topic?

  And Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• App rejected, no idea why

  Hi people,

  Presenting my first PlayBook application last week and got a rejection notice this morning. The email said:

  - failure 500 no debug token found error when installing
  

  ... and related to this topic.

  I really don't understand what this means, I thought that the tokens were used to run unsigned when testing applications? I have a chip on my device to test, I have my signature keys configured in Flash Builder (on Mac) and I have a blackberry file - tablet.xml in the project with my authorId and a correct version number in my - app.xml file.

  What else am I missing?

  Thank you

  Do you mean that the experimental House actually sent that support you this as notice of rejection?

  That makes no sense to me... If you have submitted an application signed, you need to, do not deal with chips of debugging.

  Any chance simply didn't you sign, and their limited scope (if any) of the English language prevented explaining them their concern?

  Do you know how to check that you have correctly signed soft? There are beyond discussions if you need, or ask.

• Pop - up to remove after pressing rejects three times (howto disable)

  Whenever I reject 3 pictures in a row (by pressing X), I get a boring pop asking me to "remove selected photo form the disc or only from Lightroom". The options are remove the disc / cancel / remove

  

  I have no idea why this pop-up shows after only three rejected images every time? It's annoying because I have to press on enter it each time.
  Someone has any idea how to disable this question?

  This topic can be closed. The problem had nothing to do with Lightroom. The problem occurred because I had a shortcut in TextExpander that triggered when you press xxx. It is strange that the x - are are treated as if they were text in lightroom and so activatie TextExpander. After you delete the shortcut in TextExpander, the problem is resolved.

• RoboHelp 2015 (12.0.2.384): The search returns topics do not are included in the table of contents

  ENVIRONMENT: Windows 7 Enterprise SP1, 8.00 GB of RAM, 64 - bit OS, Office 2010, Adobe Acrobat X Pro, Acrobat Reader DC 2015.017.20050

  DESCRIPTION OF THE PROJECT:

  • A single RoboHelp HTML project with three exits. One of the outputs is a 'validation' reference that has its own Table of contents.
  • Validation reference Table of contents contains a subset of the subjects in the main help system. For example, the help system main table of contents contains a folder named 'Administration '. This folder is not in the table of contents of reference for Validation.
  • The reference of Validation is displayed on a public web site. Therefore, we applied the tag "Non_public_info" contained in the topics shared that we do not want to appear on the public website.
  • WebHelp parameters are:
    • Validation reference TOC
    • No map file, no sequence to browse
    • Conditional compilation expression: NOT_Non_public_info_AND_NOT_StyleGuidelines_AND_NOT_TRP (we keep our Style rules in the project to facilitate access during development. TRP content must be rejected because it was not released.)
    • Exclude non referenced topics of output is selected.
    • Search options. Only 'Show Total number of search results' and 'View AND search Option in outputs' are selected.
  • After generating the WebHelp, we remove the files that we don't want (RoboHelp generates empty folders, even if the files are not in the table of contents.)

  PROBLEM: A search in the help of Validation reference reveals the topics that we think should not be included because the subjects themselves are not in the table of contents of Validation reference. For example, the section "Data quality analysis" is in the main table of contents help, but not in the table of contents of reference for Validation. Therefore, we do not expect the topic appears in the search results pane at all. But he does. When the user clicks on the subject, the "Resource not found" message appears.

  Nothing shows the topic Style_Guidelines because the StyleGuidelines label conditional construction applies to the entire folder and the "Style guidelines" book in the main table of contents. (Same thing for the TRP folder).

  QUESTION: Why are topics which are not in the table of contents and whose records are not in the project at all appearing in the WebHelp during a search? We need to rewrite the expression of conditional compilation or establish conditions differently. We assume not have topics in the table of contents, not including the topics not referenced in the output, and remove empty folders would be the way to go. Any help is welcome!

  Thank you very much.

  Carol Levie

  The table of contents does not control what ends up in the output for output online. All content tagged and tagged content which is not excluded by the expression of construction will be included. The parameter 'Exclude topics not referenced output' more exclude all subjects which are not in the table of contents AND are not related to any topic which is included in the output.

  On the other hand, for the print output the table of contents control which is found in the output. I think that it will fire a lot of people.

  If you generate the help and that you do not remove the unwanted files, do you still have the error? If this isn't the case, you know that the topic is referenced somewhere in the content of the reference of the Validation.

  Here is the help of RH11. I can't imagine it would have changed, but you could do a search to verify a second time for RH2015.

  Exclude output not referenced topics

  Select this option to exclude any topic that exists in the project, but is not the default theme in page layout or is not referenced table of selected contents, index or sequence to browse, or any referenced subject.

  Note: RoboHelp shows the topics not referenced that are excluded from the output in the output view module.

• ADF Mobile Apple rejection (terminateWithStatus)

  Hi ADF Mobile community,
  
  We receive a rejection of Apple for an application that was written with Jdeveloper 11.1.2.4 (it is listed below). Can someone shed some light on how to find and fix the problem?
  
  Thank you
  
  -asa
  
  Apple
  2.5
  
  We found that your application uses non-public APIs one or more, which is not in accordance with the App Store Review Guidelines. The use of non-public API is not permitted, because it can lead to a poor user experience should change these API.
  
  We have found the following non-public API/s in your application:
  
  _terminateWithStatus:
  
  If you have defined methods in your source code with the same names as the above API, we suggest to change your method names so that they face is no longer Apple private API to avoid in your current application reported in future submissions.
  
  In addition, one or more of the above API may reside in a static library attached to your application. If you do not have access to the source of the library, you can search for the binary compiled using 'channels' or 'otool' command line tools. The tool 'strings' can produce a list methods that appeals to the library and the ' otool - ov "will result in Objective-C class structures and their methods defined. These techniques can help you to refine where the problematic code.
  
  We appreciate that you might have made precautions in your code to use the non-public APIs, however, there is no way of correctly or completely predict how an API may be changed and what effects these changes can have. For this reason, we do not allow the use of non-public API in applications from the App Store.

  Hi, Asa, even if we have solved this outside of this thread, I would formally respond to this topic to close the discussion.

  The version the most recent update of the ADF Mobile extension solved that problem.  There should be an update to the extension of the ADF Mobile in the center of update of JDeveloper.  To get the update, go to the JDeveloper - Help - Check For Updates menu item - official Oracle Extensions and updates, and you should see an extension of the ADF Mobile 11.1.2.4.39.64.44.  You will need to download the extension, restart JDev, and then go to the Build menu item - clean to clean the ancient artifacts of deployment.  You can re - deploy the application.  No changes in the application are necessary - change is in the runtime only, and you can resubmit the application to the AppStore.

  After you apply this hotfix, there are several known approvals of applications for ADF based Mobile that has verified the fix.

  Thank you

  Joe Huang

• This type of app is rejected?

  Hi all

  Looking for a little guidance.

  I am trying to decide how single-folio standalone applications will rise in my design business.  I'm a little confused as to what is accepted by apple.  I noted in its terms that advertising and marketing material is not allowed, so I'm at a loss on what means.

  For example,.

  I have created an app for a client as an exercise for me as I'm designing some literature printed for them.  I made the application of a number of articles with a lot of objects of State Multi and interactivity, also with an edge on their logo animation.  My idea was that, rather than let the customers with a flyer on their business, they could just let new customers with a card with a QR code on it. That would then allow the customer to download their free app with all the information in this topic to their company, packages etc. on their phone at the meeting.  In my mind it is much better that to leave something with a site Web about this, hoping their potential customer will look at it later.  But I have been informed that if it can be presented on a Web site, then it will be rejected as an application!

  I also want to create an application for my own business simply show the kinds of things we can offer.

  Would it be a straight rejection from Apple and therefore a waste of time?  I know that no one can give a definitive answer about this, but I'd like to hear the opinions of other users DPS.

  Also, is there some kind of list of standalone applications created with DPS?  If this isn't the kind of thing that we can do then, what is?  I mean for example, Bob on the lynda.com training video is a college prospectus.  Surely, which can be presented on a Web site?

  Sorry for the question for a long time!  Any help/advice would be great.

  Thank you

  Ian

  Oh how I wish I could give you a definitive answer, but you never know.

  If it's very interactive, even if it's a promotional piece, it might just

  sneak in. Beyond the Apple Developer account cost, it cost you

  anything (assuming that you have a creative cloud account) to try.

• Cannot reject the notification - reminders

  I shared a list of reminders and received three notifications on action - strangely one of the calendar. I managed to dismiss both of them, but we refuse to be rejected and is still there on my lock screen now. Sliding right and selecting Clear do nothing. I removed the part and removed from the list - the notification is still there. Suggestions would be appreciated before resetting the phone.

  Hello Solidgone101,

  Thank you for using communities Support from Apple. I know have a problem with notifications and reminders, it's not what you expect. The good news are the following steps will help to solve your problem and get your iPhone working properly again!

  1 turn off reminders in settings > iCloud and then restart your device under the tap down and starting process is important to keep the iOS software works correctly. Turn reminders and test your question.

  Restart your iPhone, iPad or iPod touch

  2. the next step is to make a backup of your personal data, and reset all settings settings > general > reset your device. This resets all settings on your device as a background screen, sounds, display & brightness, background App Refresh, Date and time and removes all of your previously used passwords and Wi - Fi networks.

  The backup of your iPhone, iPad and iPod touch
  Import photos and videos from your iPhone, iPad or iPod touch
  Reset the settings of the iPhone - iPhone user Guide

  See you soon!

• The automated help site rejects my extreme SN.

  The automated help site rejects my extreme SN.  Embarrassing.  Has anyone else had this experience

  < re-titled by host >

  do not post your email.

  your question is vague to the point that the answer is to ask the developers of the Web site.

• Reject incoming calls on ios 10 not listed is not on the lock screen (Notification)

  Reject incoming calls when the phone is locked by pressing the power button / stop on ios 10 that the same call does not appear on the lock screen or (Notification) as a reminder...

  N ° it will not. He never has. you will see a missed call notification if you miss the call. If you actively reject the call, you don't have to Miss it. Access your recent calls list and call back them was from there.

• How to remove apple news topics?

  I like the new product new Apple iOS.  However, it seems difficult to manage themes.  I used to read the headlines and other news using other applications.  My children have iPads that are related to my account and managed by me.  I would use the product of news with them, but I can't understand how to limit news to a few topics that interest them (science, history, etc.). They don't bother Sports, finance, fashion or news of last hour (nor do I want them to see a big part of it).  There seems to be no way to remove the new trends, news or other ordinary stuff.  I can't find references on how to do it either.

  Thanks in advance

  In the application of new type on Favorites, then change. Delete all sources are irrelevant or inappropriate.

• I no longer buy with my credit card! Me says "rejected payment method.

  Hello

  I can't buy apps and games with my Visa card. Says "rejected payment mode" and I don't have ANY other means of payment.

  Please do the necessary as quickly as possible!

  Thank you mauruuru.

  To solve your problem with your credit card you will have to talk to your bank.

• My new IPad 9.7 "pro requires an access code, which I do not remember. I tried to restore factory settings (as it is a new system and no backup file) through the help topic, but getting not solved.

  Hello everyone, I am new to the community. My new IPad pro application for password, I have donot remember. As a new tab without any file, I tried to restore it to factory settings as detailed in the already available relevant help topic. But, even after several attempts, I get an error message - Itunes cannot download software for Ipad because it is protected by password, try again. I just dropped. As I am currently in Mozambique, the online help tool also does not work. Can someone advise me please how to fix this problem/get to Apple help to start my Ipad.

  Thank you

  RAM mohan rao

  If you forgot the password:

  https://support.Apple.com/en-us/HT204306