Topic shows in the project manager, but not in Windows Explorer

Similar Questions

• Impossible to display the names of HTML files in the HTML Files (topics) folder in the project manager

  RH8, I want to see the names of the HTML files instead of topic titles in the project manager.  I chose the button toggle project manager and the name of the folder is passed to "HTML Files (topics)" of "Project Files".  However, the folder of files HTML (topics) lists topics with subject titles, rather than the names of HTM files.  I was expecting to see the topic list in the Manager component of project with HTM file names.

  What should I do to display topics by names of HTM files in project manager?  The rocker is not working properly, or I do not understand what the toggle button?

  This occurs for each project, we have - all of which have been improved from RoboHelp X 5 to RH8.

  Thanks for your help.

  Susan

  You switch between the new view and the classic view. Try the view menu.

  See www.grainge.org for creating tips and RoboHelp

• When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer.

  When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer. I use windows 7 on a laptop Pavilion dv7-6b77dx.

  Thank you.  I followed your instructions and it worked.  I am amazed by these forums.  No matter what a person has problems, there is someone out there who has the knowledge and the willingness to share with the less informed.  Thanks again for you information.

  lacroos

• External hard drive in the Device Manager but not in disk management

  So I have this external hard drive Western Digital 1 TB. I've had for over a year now and it was working fine. I would like to trade my XBox 360 and the computerregularly. Then one day I brought home, plugged into the computer and nothing. My friend and I couldn't understand anything. We have gone as far as removing the hard drive and put it directly into the computer. I have reviewed, that he has lost.

  Then yesterday, on a whim, I tried to connect it again to the USB port. It is presented in the Device Manager but says that its drivers have not been installed. Then, I changed the USB ports on the back of the computer and as if by magic, that this is once again. I had full access. Stupid (and you can see where this is going) did not immediately transfer anything off the hard drive. I'm looking for an image and listen to a song off of said hard drive when the drive went suddenly not recognized.

  I can see now the reader in the Manager of devices under disk drives, and USB devices. However it does not appear in the disk management window. And Yes, I checked as well the Productdocumentation upper and lower, that it is not listed. Go to the area where you assign drive letters not shown not be. Normally this is E:.

  I also tried to remove the UpperFilters registry in regedit. It was not to remove LowerFilters. Obviously, that didn't work or the other.

  I tried several cords and all my USB ports with no luck either.

  I went on the WD Web site, but they do not offer anything other than a partitioner that I would save rather than as a last resort as there are a number of things on the hard drive I want to save.

  So it's not like it's a new HD to be partitioned or an old man who comes out crapped. I know there's the data I just need to get home long enough to get what I need. Maybe I missed my window, but maybe I did not. Maybe someone can help. I'm at the end of my mind on this thing.

  Sounds like a problem of partition (maybe corrupted partition tables) if the device is recognized, but not the 'disk '.

  There are recovery/repair partition about tools.  Western Digital actually have some but I think that they are made for internal drives.

  If I were you, I start with WD and start looking for partition recovery/repair tools.  If this is the problem then it is the right kind of problem and you using the right type of solution can fix it easily.

  If this is not the case, some data recovery tools can help you recover some files even if you have to recreate a new partition, although I wish you much luck with this approach!

  Good luck whatever you try and make sure that you do not overwrite the what partition information, you have without making backups (many partition edititing software will offer backups)

• LPT1 in the hardware Manager, but not in the virtual machine settings. Parallel port software unable to find LPT. Windows 7, 64-bit and XP virtual

  Hallo,

  the forum is full of questions similar to mine and everything seems complete without useful answers some time early last year. I would like to give a try today to see if I get a solution.

  Have Windows 7 Enterprise 64 bit and installed XP mode to be able to use the chip programming hardware (GALEP-III), which is connected via the Parallel Port. Downloaded XP mode later than yesterday (24.02.2011) Microsoft.

  In the XP box, the LPT1 port appears in the hardware Manager. But it does not appear in the settings for the XP mode. The Galep software starts just fine, but can't find the PARALLEL port.

  As written above, there are many people who have the same problem and seem to have gotten no solution. One piece of advice I found was to modify the VMC

  LPT1 (378 h-37Fh)

  1

  The above did not work. I think it was for a different version of XP-mode.

  Then there was advice on LPT need 378 h-37Fh. It's fine with my pc.

  Then, there was a Council to stop the 'Print Spool' Service on the host pc. I tried in vain.

  So, if there is a solution to my problem, please let me know. Thanks in advance.

  (Note: I'm not interested to connect a printer.) I have an IC programming material that can connect only through a parallel port. It also comes with a security dongle. GALEP III).

  Good bye.

  Have you tried in this more specific Forum?

  Virtualization of Windows 7
  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Under settings is there anything you can do with the section of COM port, if it applies to your problem of material in the first place?

• Image showing in the preview browser, but not on the site.

  I am trying to replace an image with a new and have done so using Dreamweaver CC.  It looks perfectly fine in the preview in browser, but when I 'put' on the site and upload to the server, it does not show.  The correct text is there beside it, but it's just a white background where the image should be.  I already checked the link and the source image, and is not the issue.  Someone has any idea how to solve this problem?

  want to quintuple check that?

  I see zane - storms1.png in the directory, but the link will zane - storms2.png in the HTML

  Depending on your server, there is no zane - storms2.png this directory of images...

  

• Documents showing to the mapped drive, but not redirected Library Documents W7

  Hi all

  We have a school system that has a n: that is our network home folder.

  The Documents Windows 7 library is also redirected to our folder.

  If we look on the home network via the N: drive we see documents, however if one looks at libraries, not all documents appear.

  Any ideas?

  Concerning

  Graham Jones

  Systems and Network Manager

  Pool Hayes Arts & Community School

  Hi Graham,

  The first thing you want to do is set up the sharing options on the drive or folder you want to share. This requires you to be on the computer that hosts the drive or folder.

  If the administrator of the computer had followed the steps mentioned here, you would have access to the library files:

  1. Click on the "Windows Explorer" icon in the lower left corner of the Windows taskbar to open the Windows Explorer file browser.
  2. Navigate to the folder to be shared.
  3. Right-click on the folder to share and select "sharingwith... »
  4. Click on the option of 'some people' in the context menu. Theshare with users'interface opens.
  5. Type a user name, or click on the arrow pointing down to the list of users.
  6. Select each user access to the folder or click on the "everyone" option. Each added user appears in the list of "users". Click on the button 'Add '.
  7. Click on the arrow pointing down next to each user and select the level of permissions for this user. The options are ' read/write,""read-only ' and 'Delete'.
  8. Click on the 'Share' button. The folder is now shared with the users specified through the home network. A confirmation window appears.
  9. Click on the button 'fact' to close the 'sharing ' window.

  Please let us know the result. If the problem is still not resolved, we will be happy to help you further.

• Dell XPS 8700 - failure of the keyboard when the bios boot (but not when Windows is loaded)

  My Dell XPS 8700 has 10 Windows and a Logitech Keyboard wireless, connected by USB. The keyboard works absolutely fine when Windows has loaded. I have the latest version of the bios, A11.

  However, when the computer is turned on and starts the bios start, it displays 'Keyboard Failure' on the screen for about half a second. When I try to go into the bios setup by pressing "F2" at the counter (I keep typing "F2" from the moment when I press the power button on the computer), there is no answer. The "keyboard failure" and inability to enter the bios setup seems to happen if I do a cold immediately after a stop start, a cold start after the computer is turned off for an extended period or a reboot.

  I tried to connect the wired keyboard original Dell one of the USB ports on the front of the unit (without disconnecting the wireless keyboard) with the same problem at the start of the bios.

  I encountered this problem on versions of bios A11 both A03. I know that in the past, although I don't remember when - I was able to enter the bios setup by pressing "F2".

  Any thoughts on how to solve this problem?

  You can try and reset the CMOS. It will return your settings to factory settings, but not the version. Usually, this erases these problems because CMOS stores data editable such as your wireless keyboard settings. BIOS stores the information about the basic material that is unchangable as your keyboard usb, mouse and other essential equipment. If you notice, when you just plugin any keyboard and mouse, its recognized at startup. Your needs software to run wireless device and that is stored in the CMOS.

  So once reset you the CMOS, you may need to then install the wireless software.

  Good luck.

• Import of files - files show in the file manager, but do not appear when I try to import them.

  Hello

  I use Pro for many years but have not had this problem before. Any suggestions?

  Thank you very much

  John

  Thank you, Kevin

  This morning, the files are now show and can be imported.

  No idea why, but turn on the computer, my main technique for COMPUTER problems, worked again.

  All the best

  John

• Hard drive shows up in Device Manager, but not in 'my computer '.

  I have a Samsung HD103UI SATA hard drive in a dual docking station Thermaltake Black Widow hard drive. I connected it to my laptop via a USB port. It appears in Device Manager and says it's working properly. It however does not appear in my computer. I go to disk management and presents itself, he says "Dynamic Disk 1, invalid. If I right click on the drive, it asks if I want to convert it to base, but if I do that I will lose my data. I hooked this same configuration of my XP machine and it worked fine, no problem. How can I fix without basic conversion and how do I get it to appear in my computer?

  End to this problem, that I had the hard drive on the xp machine unload everything out of it and reformat the hard drive on my Vista laptop. I did once it worked fine and I can move it back from my xp and vista machine. It's the only way I could get this drive to work.

• "I just get the" Application Manager "but not the" Adobe Creative Cloud «...» "How do I use now all the features like photos and fonts and how can I share my files?

  I work with the mac os 10.6.8 ist this the problem?

  Hi Michaelh58218477,

  Please check the system requirements for | Adobe Creative Cloud, hope this helps.

• When I linked book FM, I have files in the project files, but no chapter file in Table of contents chapter

  Using RH9 in TC 3/Windows XP

  I've linked to a number of books in this project. A book has all the chapters files well displayed in project files folder in the project manager, but have no books in the table of related materials.  Only topics.  How to fix this problem.  It seems that I deleted all the files in the table of contents before that I can delete the TOC file in the project manager, but is it anyway to regenerate the table of contents?

  Thanks in advance for the help.

  Mary

  Hi parties,

  You don't want to say that the table of contents are different in RoboHelp compared to FrameMaker TOC, please take a look at this blog http://blogs.adobe.com/techcomm/2010/03/demystifying_mapping_filesettingisf_and_toc_genera tion.html- it might be useful.

  you don't Ned to remove the link from the book of RoboHelp can just make changes in FrameMaker or update and correct path of TOC in RoboHelp and Force the link to update.

  It should make changes in ROboHelp TOC.

  In addition to that you can change the table of contents to RoboHelp after generation according to your need (these changes are going to get is returned on the next update)

  Hope this will help

  Ashish

• Ethernet adapter is not showing in the Device Manager

  

  I have a vastro 460 with i3 with intel and Windows 7 32 bit. try to install the driver for the network card, but does not. Ping works but do not show in the Device Manager.

  Any help will be much appreciated

  Hi EMH.

  You will need to install the Chipset Drivers first and later network adapter drivers. The IP address that you have ping is the local host and works, even when there is no network card detected.

  Please download and install the NIC in the network section and the section Chipset Chipset drivers from the following link, by drilling in the serial number:
  http://Dell.to/QjjZDA

  Please let me know if you need more assistance.

• HARD drive secondary, detected in peripheral & BIOS Manager but not in the W7 Explorer

  Subject to HARD drive is detected in the BIOS and Device Manager but not in Explorer Windows.

  Problem is with a single internal partition 2 TB HARD drive that was installed six months ago.
  Since its installation, topic drive HARD has been successfully used for backups of W7.
  Problem started occurring two days before without changing hardware or software.
  There is no error message.
  Several cold reboots, change the data cable and done SATA ports fails.
  Idems for update and uninstall driver followed with reset.

  The system is Windows 7 Pro x 64 with 20Gg RAM and only partition 2 Tb drive HARD primary and 2 TB of HARD drive.

  Thanks a lot for your help.  :-)

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• After that restart of firefox does not start. is running in the Task Manager, but won't pop up. Reset safe mode and uninstall/reinstall won't help. OK so no reset.

  Win7 Pro. has worked ok firefox. but lately with 25 and 26 now, firefox does not start. I see that firefox is running in the Task Manager. but it will not just appear.
  If I still download and install it, it runs, but every time I restarted the system, it just does not work yet.
  Reset try:, safe mode, uninstall & reinstall, new/clean profile none of these work.