HARD drive secondary, detected in peripheral & BIOS Manager but not in the W7 Explorer

Similar Questions

• XPS 8300: Install new hard drive 3 TB BSOD results after imaging but not after Win7 clean

  I have a XPS 8300 and the original Seagate 2 TB hard drive is dead. Because being forced to install a new HARD drive, I opted for 3 TB and bought a WD because I had horrible luck with Seagate repeatedly.

  Anyway, I installed the new HARD drive and booted from the Windows 7 64 bit Pro installation disc and attached my external drive to backup and choose the backup image to the new disk. It completed without error, but when the computer restarts, I get a blue screen of death with the 7B stop code. I tried to put the HARD drive in a box and attached to another computer, and all my image files are there so I know that the computer was able to write the image to the new HARD disk. How to fix the BSOD errors? I set to update to the latest version of the BIOS (A06) but always the blue screen. I tried to install the latest Intel drivers also and which does not seem to do anything.

  Frustrated, I installed Windows 7 clean on this drive and I am writing this message from him. The drive appears in my computer as a 2 TB. Disk Management displays 100 MB System Reserved Partition, Partition C: of 2047 GB and 746 GB unallocated.

  Why a new installation does not seem to work (I know that I would have to format the 746 GB to use it and to give it a new drive letter) but the imagery that the disc breaks down. What Miss me?

  I've seen a lot of posts on using Intel drivers to solve similar problems. These drivers get breaths during the imaging process? Should they be installed before the imagery of the backup? (Thought that I did, but maybe I didn't do it right - their installation can be verified before the disk imaging?) Tried to call Dell and Windows support... am no where in a hurry.

  Hi LG1382,

  You cannot start Windows 7 on a 3 TB drive. You can use it for data, but not as the system drive. Windows 7 can only start TPG on systems with BIOS UEFI, which does not the 8300.

• Why is my hard drive (external) working on a Windows PC, but not on my Mac?

  I recently got a few files transferred to a friends computer to my external hard drive and when I plugged back on my Mac it wasn't appearig in the finder or disk utility. The power led on the hard drive lit. When I plugged it in my friends mac hard drive was there, but when you clicked on the folders they were all empty. We then plugged on a Windows computer, and it worked fine! What keeps it from working on Mac?

  Thanks for the help

  Hi Rotherham:

  The hard drive has been formatted in Mac (Mac OS Extended journaled) format.

  He worked on your Mac before that?

  Were the files that you copied from another Mac or Windows computer?

  You say you plugged into a computer in the window and it worked fine.

  A Windows computer will not read an external hard drive that is formatted as OS extended (journaled).

  So maybe it is formatted in NTFS in Windows.

  Kim

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• COM3 showing in Device Manager but not in the list of printer port

  I have a Datamax Allegoro printer that uses a USB series converter. The poster converter as installed correctly (in devices and Device Manager) and received COM3.

  When I go to change the player of the printer to use the COM3 port, it is not in the list. How can I get the COM port appears in the list of printer ports?

  Note: this port was already there, but anyway when I was working on some of the settings (I changed the adapter to use COM1 temporarily as a test, then when I went to change it back, it was gone). I tried to uninstall the driver for the adapter and then re-install again, it did not work.

  Thank you.

  Use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  Good luck.

• Download new modules that I appear on the Add-ons Manager, but not in the menu drop-down

  When I download a new add-on on the site add-on from Mozilla, the Add - it will appear in my Add-ons Manager, but I can't use, because it will not be displayed on my menu drop - even if the Add-ons Manager said that told Add-ons are enabled. How can I fix it? Also, I can download some add-ons that work very well when visiting sites like amazon or dictionary.com where their modules appear in the menu when you visit.

  Thank you.

  A search engine plugin.
  http://mycroftproject.com/search-engines.html?name=Google+images

• I opened a folder from an e-mail, made changes to the word document, and thinking that I had saved on my hard drive, I closed it. Now I can not find the file with the changes. Is there anyway I can retrieve the file with the changes that I made for her?

  recovering files

  Follow these steps to find the file;

  Go to folder options in Windows Explorer > organize, click the view tab and select "Show the hidden files and folders" and uncheck the box on "Hide protected operating system files".

  Copy and paste the following text in the address bar of windows Explorer. Don't forget to replace "XXX" with your own username (or one that has been used by modifying the file), C:\Users\XXX\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5

  Now you're going to see some folders, the file you are looking for must be in one of these folders.

  Thanks to http://vistahelp.wordpress.com/

• LPT1 in the hardware Manager, but not in the virtual machine settings. Parallel port software unable to find LPT. Windows 7, 64-bit and XP virtual

  Hallo,

  the forum is full of questions similar to mine and everything seems complete without useful answers some time early last year. I would like to give a try today to see if I get a solution.

  Have Windows 7 Enterprise 64 bit and installed XP mode to be able to use the chip programming hardware (GALEP-III), which is connected via the Parallel Port. Downloaded XP mode later than yesterday (24.02.2011) Microsoft.

  In the XP box, the LPT1 port appears in the hardware Manager. But it does not appear in the settings for the XP mode. The Galep software starts just fine, but can't find the PARALLEL port.

  As written above, there are many people who have the same problem and seem to have gotten no solution. One piece of advice I found was to modify the VMC

  LPT1 (378 h-37Fh)

  1

  The above did not work. I think it was for a different version of XP-mode.

  Then there was advice on LPT need 378 h-37Fh. It's fine with my pc.

  Then, there was a Council to stop the 'Print Spool' Service on the host pc. I tried in vain.

  So, if there is a solution to my problem, please let me know. Thanks in advance.

  (Note: I'm not interested to connect a printer.) I have an IC programming material that can connect only through a parallel port. It also comes with a security dongle. GALEP III).

  Good bye.

  Have you tried in this more specific Forum?

  Virtualization of Windows 7
  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Under settings is there anything you can do with the section of COM port, if it applies to your problem of material in the first place?

• My computer motherboard laptop disappeared. Connected my hard drive to another laptop but still, no data is found, nor my hard drives are detectable? Very depressing and need the data. Help, please

  My laptop broke down (motherboard, Gone) and is not repairable. The technician took my hard MovieFrame and there is a very important document that I need very badly. I bought a proper case and connected my hard drive to another laptop but unfortunately no data can be found, nor my hard drives are detectable? I am very depressed and need the data. Please helllllllllllllllllllllllllllllllllllllllllllppppppp

  Hi Adel Bushager,

  I suggest you contact the store local tech or the manufacturer of the system to help with recovery of data from the hard drive.

  Hope this information is useful.

• My HARD drive is detected by the BIOS, but it does not start

  I have a laptop, OS is Window7, the HARD drive is detected by the BIOS, but it does not start, I formatted and the procedure going well until the reboot, it starts not to finish formatting.
  Please, I need help!
  Thanks in advance

  Hello

  Sounds like the hard drive has failed, or other hardware issues affecting the reader by the mother-
  Board or wiring.

  Check with Lenovo support, online documentation and diagnostics and ask questions about known issues in their
  forums.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  ---------------------

  The manufacturer Diagnostic utilities - use them to check the disk.

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en

  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer.

  When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer. I use windows 7 on a laptop Pavilion dv7-6b77dx.

  Thank you.  I followed your instructions and it worked.  I am amazed by these forums.  No matter what a person has problems, there is someone out there who has the knowledge and the willingness to share with the less informed.  Thanks again for you information.

  lacroos

• I changed the hard drive, how do I put on an operating system on the new hard drive

  I changed the hard drive, how do I put on an operating system on the new hard drive

  Restart with the keys Option and command R keys. If this keyboard shortcut does nothing on your Mac, use a compatible Mac OS X installation DVD.

  Follow the prompts on the screen.

  (142198)

• The standard games on my computer has been deleted and my hard drive went out is there a place I can download the standard games

  original title: games

  The standard games on my computer has been deleted and my hard drive went out is there a place I can download the standard games

  ---------------

• I just had a new hard drive installed (with XP), and no matter where I set the resolution, everything seems to be stretched horizontally

  I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally.  I don't have this problem with the old hard drive containing XP

  If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.

  SC Tom

• All files on my hard drive has become a shortcut, with kiieyex.exe added after the backslash in car

  original title: "kiieyex.exe" added to the files.

  Someone had this shortcut path added to the files? All files on my hard drive has become a shortcut, with kiieyex.exe added after the backslash in the car. When you click on it, I get this message: problem with shortcut shortcut, the called has been changed or moved and work more properly. You really want to remove this shortcut?  I'm not enough common sense to understand what happened, or what I need to do to access my files... Help!

  Hello

  Follow these steps:

  
  Step 1: download and run the tool of diagnosis from the link below.

  
  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/  

  
  Step 2: run a scan for viruses on your computer.

  You can scan the computer using an anti-virus program. You can also analyze your computer online.

  Click here: http://www.microsoft.com/security/scanner/en-us/default.aspx