Torn NAS 200 flow music

Similar Questions

• NAS 200 - network not found

  I have no problem at all with my NAS 200 until I changed the password and custom folders and configure the passwords for individual usernames.  I tried to reset admin-admin by pressing for 10 seconds and 15 seconds, but it does not work.  I also tried to reboot the NAS.  I got 2 computers that had to be repaired where I had to reinstall the computer NAS 200 configuration. Another computer can access files folders - no more.  All 3 computers cannot access records due to this problem of username and password. I searched this site for ideas on how to solve this problem. So far, I have not found the solution. Help, please. Address 192.168.1.71.

  Hi Rowenah,

  You mentioened that you heard just a beep when you did reset. According to the manual their should be 2. For more information how to reset the NAS please visit this link:

  Title: Reset Network Storage System NAS200 Article ID: 19023

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=63b3066b50be4875bcab7f5a9364eb5b_19023.XML&PID=80&...

• NAS 200 Failed Disk - using RAID1

  Hello

  One of my two drives have failed in my NAS200.

  The NAS 200 is configured as RAID1 and one of the original pair still works correctly. I need to swap the second disk with a new - how can I get this new second drive to work as a mirrored pair without reformatting the drive working?

  Appreciate any help.

  Adrian.

  FYI

  NAS 200

  2 x Western Digital WD2500JS - 250 GB drives

  RAID1

  Firmware 3.4R79

  Turn off the NAS with the power button (it will beep when you press the button and it will turn off after a few seconds). Replace the bad drive by another which has at least the same size, and then turn the NAS.

  On-board software will automatically rebuild your RAID. You will see some blinking lights while he does, and you should also be able to see in the web UI, it does this. Your data should be accessible during this period.

  Rebuild the RAID takes a long time, probably more than a day depending on the size of your disk.

  = Jac

• Initialization of the NAS 200 without internal drives?

  You just bought a NAS 200. Do not have the SATA disks to put in it right now, wait until I can pick up of large capacity disks. Having several external USB drives that I would use. I was wondering if the NAS200 may start without having to install the internal disks. Then I can use it as a bridge of network connection to my external usb drives. Just wondering if you can get it even start without at least 1 Reader installed.

  Thanks for any help

  Well, it plugged in, it starts, and it starts fine. Once I plugged a USB at the back once it was connected to my network. All I had to do was to format in FAT32 NTFS and it works fine. Even updated the firmware using the integrated very well. Overall pretty happy, I can use my external drives until I get some internal parts SATA for the NAS.

• mini HP 200 flow: using USB recovery for the same hp computer?

  Hello all I have 2 mini flow 200 computers can I build a recovery usb and use on the second computer hp mini to get 8.1 with bing back window because the partitions have been formatted when I tried to get the 10 window but did not.

  Thanks for the help.

  Hi, Yes, it will work.

• NAS 200 change disc journaled format = > not logged

  Hello

  I read in the forum that change journaled disk format to non logged can accelerate access to the drive, but is less secure.

  I use 2 disk in my nas200 2 years.

  What is the level of appreciation of the speed I could expect?

  How can I change the disc format?

  What kind of titles cannot compensate for the change of format of disc about the integrity of the data?

  Thank you very much

  Will improve the speed by about 50%.

  Worth of security, is that if you have a power failure while writing to a file, this file may be lost. The risk of loss of data because of power failure is much lower in logged mode.

  You can change that by reformatting the drive, which will erase all your files. If you need to back up your files before you do and restore them later. Of course, this will take a very long time (perhaps several days, depending on the size of your discs).

  You can save time by using SystemRescueCD on a PC with the NAS200 disk connected to your PC to copy the data to another drive before we do the reformat. Then you can put the disc into the NAS and reformat. Then put the disc on the PC and use SystemRescueCD to copy files back. Do not use SystemRescueCD to reformat; the NAS will have to do.

  = Jac

• NAS 200 - two drives configured as a big disks (JBOD/LVM)

  Hello

  My first drive is full and so I put a second in my nas200.

  When I select:

  Two drives configured as a big disks (JBOD/LVM)

  My first drive will lose all the data?

  After that I backed up my data, I have merged the two discs.
  All data, users and directories have been removed.
  Thanks for the replies.
  Good bye

• Windows Media Player not showing not ripped or downloaded music

  Until there are a few days, torn CD and downloaded music from web sources automatically and permanently would appear in my Windows Media Player.  Now the files only go to the location of Windows 7 library/music and I can't get the files appear in WMP.

  Strange that it worked fine one day and then quit.

  Thank you

  Bill

  Hello

  Follow the given steps and check.

  Method 1. Troubleshooting of Windows Media Player settings

  Solving the problems of open Windows Media Player settings
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Ripped files are automatically added to the Player library. On your computer, the files are in the folder in your library of music specified on the tab extract music from the Options dialog box. You can change the folder at any time.

  For more information about the location of the ripped files.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music

  Method 2:

  This problem occurs because the Windows Media Player library database is corrupted.
  
  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  1. exit Windows Media Player.
  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.
  3. Select all the files in the folder, and then click delete on the file menu.
  Note you don't have to remove the folders that are in this folder.
  4. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.
  
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.
  2. Click Start, click Run, type %LOCALAPPDATA%\Microsoftand then click OK.
  3. Select the Media Player folder, and then click delete on the file menu.
  4 restart the Windows Media Player.

  Hope this information helps.

• New router. Connection to the remote NAS device or a file between computers does not.

  I just changed routers and lost my connection wirelessly between devices. Internet is good, but no connection with Lynksys NAS 200 wireless backup. And I can't share files between computers. All my permissions are large open on both computers, but same homegroup does not. Windows 7 on both computers. A desktop connected to the network and a wireless laptop which is connected to the NAS. My wired desktop backup is fine. NA not lose that connection.

  I just changed routers and lost my connection wirelessly between devices. Internet is good, but no connection with Lynksys NAS 200 wireless backup. And I can't share files between computers. All my permissions are large open on both computers, but same homegroup does not. Windows 7 on both computers. A desktop connected to the network and a wireless laptop which is connected to the NAS. My wired desktop backup is fine. NA not lose that connection.

  Me too, I unfortunately have the same problem.

  Installed a replacement wifi router and lost access to a NAS. And it is the only element that would not be re - connect...

  It's the config probably simple setting of the wireless router with the IP Address of the NAS (10.1.10.199 if this is of any help), but it's clearly a mystery to find useful info on how and what to configure...

  Unfortunately, it was easier under XP...

  Thanks for the research.

• Xbox on Windows RT music does not all photos in my Home Server Library

  I have about 1 500 CD, torn from the \\homeserver\Music on my Windows Home Server part. The CDs are extracted using the standard - names naming convention and are stored in WMA Lossless format. When I use other music programs (Squeezebox, J.River, Zune, Xbox Music on PC Intel) to analyze my music library, they find all the CD. However, in music of Xbox on Windows RT (I use the RT Surface of first generation 32 GB) is (900 or almost), but not all CD in my music library. Is it possible to force the Xbox Music to re-scan my music library?

  Thanks in advance for any help or advice!

  Hi Odin,

  Problems with Windows Home Server are supported in the TechNet Forums. I suggest you send the request in the TechNet Forums.

  http://social.technet.Microsoft.com/wiki/contents/articles/4287.media-streaming-known-issue-and-workaround-with-Windows-Home-Server-2011-and-Windows-Storage-Server-2008-R2-essentials.aspx

  Hope this information helps.

• Setup various AE advise

  I have problems to get the maximum speed. My ISP is 150 MB and I have this Setup:

  Airport Extreme (6th generation) placed in the living room connected to the Ethernet modem (modem is bridged, no router). When I connect this way, it gives me 130-150 MB, which is fine.

  However, when I connect these devices all starts to vary:

  1. an other Airport Extreme (6th generation) is connected to the hand on. Expansion of the network. When I try to change the option expand Network turn off this airport restarts but never succeeds and gives me an error. The only thing I can do is add then reset again and then I can only use the extension of the network. This normally works very well but do not know what it might cause the heavy fall.

  On this second AE Ethernet port I have attached a Synology NAS with my music, and so on

  2. an Airport Express (A1392 3rd gen) that I now set to join the network to see if things would improve. This one I use for music and it has a smart thermostat bridge (Tado) plugged into the Ethernet port

  3. an Airport Express (A1392 3rd gen) which I used to use to expand the wireless network but have disabled now I read that the extension of the network makes the slower WIFI and I'm afraid the Express slows down the extreme speed AC but not sure about that.

  4. a Time Capsule from Apple (4th gen) which I use for backup. I disabled the connection here as I believe join or extend the network would be to ask questions. I have attached a few devices through Ethernet at the back of the TC.

  The various airports are in different places in my house but not more then 10 meters (30 feet) on the other.

  That Setup would you recommend in order to get the best speed in different places?

  Thanks for the help!

  1. an other Airport Extreme (6th generation) is connected to the hand on. Expansion of the network.

  If you extend the network using a wireless connection between base stations, it will be the first performance issue you will encounter. It would be preferable to extend it using a wired connection between base stations. This is known as a roaming network configuration.

  2. an Airport Express (A1392 3rd gen) that I now set to join the network to see if things would improve. This one I use for music and it has a smart thermostat bridge (Tado) plugged into the Ethernet port

  In this configuration the AirPort Express performs like any other client wireless on your Wi - Fi network. He also performed an Ethernet bridge wireless for the Tado. It does not perform routing functions, or it extends the network. In addition, please note that the A1392 is a base station 2nd generation 802.11n. There is no 3rd generation... yet.

  3. an Airport Express (A1392 3rd gen) which I used to use to expand the wireless network but have disabled now I read that the extension of the network makes the slower WIFI and I'm afraid the Express slows down the extreme speed AC but not sure about that.

  Yes, what you read is correct. Again, you can reduce the amount of the penalty to performance of a network using a network of itinerant type instead. This requires not all base stations to be connected by Ethernet.

  4. a Time Capsule from Apple (4th gen) which I use for backup. I disabled the connection here as I believe join or extend the network would be to ask questions. I have attached a few devices through Ethernet at the back of the TC.

  How this time Capsule is connected? Wired or wireless and other base stations? For the record, it cannot be configured to 'join the AirPort Express wireless network'.

  The implementation of recommendation would be a roaming network.

• Question on NAS200 and large amount of data to him.

  Hi all

  I have a Linksys NAS 200 on my home LAN.  It is connected via a 1.1 WRT300N wireless router.  I have my computer connected to the router via a cable (not wireless).  I am running windows XP Media center SP3 on a HP duel core processor computer.

  My problem is that I'm trying to move a large number of media to a failed drive on my computer to a drive on the NAS 200.  There are about 1.3 TB of info and when I try to copy in windows Explorer it takes forever and consumes a lot of time my computer CPU.

  Are other than copying small amounts of these data over time as 3-5 gb each night there other options?  Maybe a program that works like a web browser download manager?  I'm not too good with FTP solutions, but maybe it would work, but I don't know how to set up.  Could this be something with how I set up my router?  I use my router as my firewall and my computer does not have a firewall.  It has spyware doctor and Ad-Aware of protection running.

  Any help would be appreciated.

  Thank you

  Steve

  Robocopy has an option to limit the bandwidth network, this will also limit the CPU usage (both on your Windows machine and the NAS).

  For others, try Googling "windows copy bandwidth limit" or "copy windows limit UC" (without the quotes).

  = Jac

• Windows Media Player 11 not Rip 'Any' CD.

  Windows Media Player 11 not Rip "Any" of my personal CDs to my library, Help!  See the below Error Message:

  (C:\DOCUME~1\Owner\LOCALS~1\Temp\db6b_appcompat.txt)

  Have tried all the fixes, start-run-delete files from media, Repopulate, etc stiil can not extract my CD in my music library.  Even some of my already torn will not play music files, just the same error message.  Same Uninstsalled WMP, then reinstalled, stiil don't Rip anything.

  AppName: wmplayer.exe AppVer: 11.0.5721.5145 ModName: ModVer indiv01.key: 11.0.6000.6324 Offset: 001087b 3

  Mr. Inzer, thank you for taking the time to try to help me.  Yes, I'm under XP PRO SP 3.  My Rip rate has always been set at 192kb.  However, I had to copy a CD, but will only rip to mp3 or WAV (lossless).  It will not yet be rip in "Any" of the Media Player parameters-Media Pro, Media lossless, etc..  I'm not the sharpest knife in the drawer, but I learn a lot with the help of people like you. Thank you.  I think I'm stuck extraction of all future CD to mp3 or WAV on my computer?  Thank you once again, RickJ41

  ====================================
  I do not know why you can not EXTRACT the .wma format.

  The following items may be worth a visit:

  Songs of RIP (copy) of a CD on your computer
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/RIP.aspx
   
  Easy start for Windows Media Player 11 guide
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/EasyStart/mp11guide.aspx
   
  Windows Media Player 11 tutorial: how your Audio CD ripper
  http://MP3.about.com/od/WindowsMediaPlayer/SS/WMP_ripcd_tut.htm

  John Inzer - MS - MVP - digital media experience

• Help more necessary scripts please.

  OK the Script below is what I would use for what I do.  I have a lot of things that I'll add to over time so I hope you can help with some of these issues.  I have all the things I want to do marked with / /.  We can only do a section at a time if you want to make the script more easily or all at the same time it doesn't matter to me.  I'm very new script so it might take me some time to do.

  var w = new window ("dialogue {text:"Ongoing changes of execution", orientation: 'column', alignChildren: ['fill ', ' fill'], properties: {closeButton: false}}");

  w.main = w.add (' group {preferredSize: 600 (500) and alignChildren: ['left', 'fill']} "");

  w.stubs = w.main.add ("listbox", undefined, ['changes', 'Check for changes', 'Example']);

  w.stubs.preferredSize.width = 150;  {w.tabGroup = w.main.add ("group {alignment: 'fill '()' fill'}") and orientation: 'stack'} ");"

  w.Tabs = [];

  w.Tabs [0] = w.tabGroup.add ("group");

  w.Tabs [0]. Add ("statictext {text:"change"}");} ")

  w.Tabs = [];

  w.Tabs [0] = w.tabGroup.add ("group");

  w.Tabs [0]. Add ("statictext {text:"Select to make a change"}");

  w.Tabs [0]. Add ("panel");

  w.Tabs [0]. Add ('checkbox {text: 'Change Run running List1'} "") ;// turn on find and replace Script

  ~ IF possible I would like this script to be exicuted if the checkbox above is selected. After pressing the OK button

  ~ I don't want this part of the script to enable if this button is not selected.

  ~ Replace("<CR>", "^p")

  ~ Replace("", "")

  ~ Replace(":", ":")

  ~ Replace(".", ".")

  ~ Replace("^p^p", "^p")

  ~ Replace("<CR>", "^p")

  //~

  //~

  //~

  ~ the function Replace (input, output)

  //~         {

  ~ app.selection [0];

  ~ app.findTextPreferences = app.changeTextPreferences = NothingEnum.nothing;

  ~ app.findTextPreferences.findWhat = entry;

  ~ app.changeTextPreferences.changeTo = output;

  ~ app.activeDocument.changeText ();

  //~

  //~

  w.Tabs [0]. Add ('checkbox {text: 'List of race change 2'} "");

  w.Tabs [0]. Add (' Panel {text: "List 1 of change running" preferredSize,: [-1, 160]} "");

  w.Tabs [0]. Add (' Panel {text: 'Running change list 2', preferredSize: [-1, 160]} "");

  I keep a list inside this Panel

  ~ "B1.   Omni before aligning information panel o in omni.

  ~ "B2.   ShopLine before aligning text panel with S in store and identifier with L Flush left text online

  ~ "B3.   Spacing of Deltron Art and logo

  ~ "B4.   Update statement Art Matthews and attribute

  ~ "B5.   A work of shot (some just change green bar Some blue ETC...)

  w.Tabs [0]. Add (' Panel {text: 'OF changes", preferredSize: [-1, 150]}" ");

  w.Tabs [0]. Add (' Panel {text: ' in baking or paste content ", preferredSize: [-1, 80]}" ");

  with(w.Tabs[0])

  {

  with (Add (' group {alignment: "left"} ""))

  {

  Add (' button {text: 'Reset al warning dialog boxes'} "");

  }

  }

  w.Tabs [1] = w.tabGroup.add ("group");

  w.Tabs [1]. Add ("statictext {text: 'Interface'}");

  w.Tabs [1]. Add (' Panel {preferredSize: [-1, -10]} "");

  w.Tabs [1]. Add (' Panel {text: "what needs changed," preferredSize: [-1, 300]} "");

  w.Tabs [1]. Add (' Panel {text: 'Options', preferredSize: [-1, 100]} "");

  w.Tabs [2] = w.tabGroup.add ("group");

  w.Tabs [2]. Add ("statictext {text:"Interface user Scaling"}");

  w.Tabs [2]. Add ("panel");

  w.Tabs [2]. Add (' Panel {text: "Example" preferredSize: [-1, 200]} "");

  I would like to integrate a picture in the sample box

  w.Buttons = w.add ("group {alignment: 'right'}");

  w.Buttons.Add ("button {text: 'OK'}");

  w.Buttons.Add ("button {text: 'Cancel'}");

  for)

  var i = 0;

  I < w.tabs.length;.

  i++){

  w.Tabs [i] .orientation = "column";

  w.Tabs [i] .alignChildren = 'bridge '.

  w.Tabs [i]. Alignment = ["fill",""];

  w.Tabs [i]. Visible = false;

  }

  w.stubs.onChange = showTab;

  function

  showTab)

  {

  If (w.stubs.selection! == null) {for (var i = w.tabs.length - 1; i > = 0;)}

  i-)

  {

  w.Tabs [i]. Visible = false;

  }

  w.Tabs [w.stubs.Selection.index]. Visible = true;

  }

  }

  w.onShow = function()

  {

  w.stubs.Selection = 1;

  showTab;

  }

  w.Show ();

  Try this... See line 58... do this and run the script

  var myResult;
  var w =new Window ('dialog {text: "Running Changes", orientation: "column", alignChildren:["fill","fill"],   properties:   {closeButton:   false}}');
  
        w.main =w.add ('group {preferredSize: [600, 500], alignChildren: ["left","fill"]}');
        w.stubs  = w.main.add ('listbox', undefined, ['Changes Made', 'Check For Changes', 'Example']);
      w.stubs.preferredSize.width  = 150;  w.tabGroup  = w.main.add ('group {alignment: ["fill","fill"], orientation: "stack"}');
        w.tabs  =[];
      w.tabs[0]= w.tabGroup.add ('group');
      w.tabs[0].add('statictext {text: "Changed"}');
                 w.tabs  =[];
      w.tabs[0]= w.tabGroup.add ('group');
      w.tabs[0].add('statictext {text: "Select a change to make"}');
               w.tabs[0].add ('panel');
      var RunCH1= w.tabs[0].add ('checkbox {text: "Run Running Change List1"}');// Activate the Find and replace Script
  
  //~              IF possible i would this script to be exicuted if the above check mark is selected. After pressing OK button
  //~              if this button is not selected i dont wnat this part of the script to activate.
  
               var RunCH2= w.tabs[0].add ('checkbox {text: "Running Change list 2"}');
               var Pan1=w.tabs[0].add ('panel {text: "Running Change list 1", preferredSize: [-1, 160],orientation: "column",alignChildren: ["left","fill"]}');
               w.tabs[0].add ('panel {text: "Running Change list 2", preferredSize: [-1, 160]}');
  
              Pan1.add('statictext {text: "B1.   Omni Align Front panel information to the O in omni"}');
              Pan1.add('statictext {text: "B2.   ShopLine Align Front panel text with S in Shop and Identifier with L in line Flush Left text"}');
              Pan1.add('statictext {text: "B3.   Deltron Spacing around Art and logo"}');
              Pan1.add('statictext {text: "B4.   Matthews Art and Attribute statement update"}');
              Pan1.add('statictext {text: "B5.   One Shot Artwork (Some change to Just green bar Some Blue ETC..."}');
  
                      // I would like a list inside this panel
  
               w.tabs[0].add ('panel {text: "NON Changes to be made", preferredSize: [-1, 150]}');
               w.tabs[0].add ('panel {text: "When placing or pasting content", preferredSize: [-1, 80]}');
      with(w.tabs[0])
      {
      with(add ('group {alignment: "left"}'))
      {
                     add ('button {text: "Reset al warning dialogs"}');
      }
      }
          w.tabs[1]= w.tabGroup.add ('group');
          w.tabs[1].add ('statictext {text: "Interface"}');
          w.tabs[1].add ('panel {preferredSize: [-1, -10]}');
          w.tabs[1].add ('panel {text: "What Needs Changed", preferredSize: [-1, 300]}');
  
          w.tabs[1].add ('panel {text: "Options", preferredSize: [-1, 100]}');
          w.tabs[2]= w.tabGroup.add ('group');
          w.tabs[2].add ('statictext {text: "UI Scaling"}');
          w.tabs[2].add ('panel');
          w.tabs[2].add ('panel {text: "Example", preferredSize: [-1, 200]}');
          flower=w.tabs[2].add ("image", undefined, File ("~/\Desktop/\xxx.jpg"));//place you image in desktop and put the image name in the place of "xxx"
  
               // I would like to embed a Picture in the Example BOx
  
        w.buttons  = w.add ('group {alignment: "right"}');
       w.buttons.add  ('button {text: "OK"}');
      w.buttons.add  ('button {text: "Cancel"}');
      for(
      var i = 0;
       i < w.tabs.length;
       i++){
      w.tabs[i].orientation ='column';
      w.tabs[i].alignChildren ='fill';
      w.tabs[i].alignment =['fill','fill'];
      w.tabs[i].visible =false;
      }
      w.stubs.onChange  = showTab;
      function
       showTab ()
      {
      if(w.stubs.selection !==null){for(var i = w.tabs.length-1; i >= 0;
       i--)
       {
           w.tabs[i].visible =false;
      }
               w.tabs[w.stubs.selection.index].visible =true;
      }
      }
        w.onShow  =function()
      {
      w.stubs.selection  = 1;
      showTab;
      }
  
   myResult = w.show();
      if(myResult == 1 && (RunCH1.value==true || RunCH2.value==true) ){
      alert("in")
      Replace_TXT("  ", "^p");
      Replace_TXT("  ", " ");
      Replace_TXT(" :", ":");
      Replace_TXT(" .", ".");
      Replace_TXT("^p^p", "^p");
      Replace_TXT(" ", "^p");
      w.close (true);
  }   
  
  function Replace_TXT(input, output)
  {
  //app.selection[0];
  app.findTextPreferences = app.changeTextPreferences = NothingEnum.nothing;
  app.findTextPreferences.findWhat = input;
  app.changeTextPreferences.changeTo = output;
  app.activeDocument.changeText();
  } 
  

• SWF will load in the browser preview

  I've added a flash to a header div website animation, but when he spotted in a browser (any browser) I get a message (see attachment) - while the film does not load. Also, I have a background as a backup image when the flash movies will not play is to say iphone etc, but the picture does not show more.

  I would really like the flash movie to load, and then decline to static image as a background image.

  This is the message the browser gives me:

  

  Here is the code for the Web page:

  < ! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN" "http://www.w3.org/TR/html4/loose.dtd" > ""

  < html >

  < head >

  < link href =' http://fonts.googleapis.com/CSS?family=satisfy ' rel = "stylesheet" type = "text/css" >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 ">"

  <!-TemplateBeginEditable name = "doctitle"-->

  < title > Eve Newsome Flow method < /title >

  <! - TemplateEndEditable - >

  < link href = "desktop.css" rel = "stylesheet" type = "text/css" > "

  < / style >

  <!-TemplateBeginEditable name = "head"->

  <! - TemplateEndEditable - >

  < script src = "Scripts/swfobject_modified.js" type = "text/javascript" > < / script > "

  < / head >

  < body >

  < div class = "container" >

  < div class = "header" >

  < object classid = "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width = "1024" height = "180" id = 'FlashID' title = "Flow music method Header" > "

  < param name = "movie" value = "stream - header.swf" >

  < param name = "quality" value = "high" >

  < param name = "wmode" value = "opaque" >

  < param name = "swfversion" value = "17.0.0.0" >

  < object type = "application/x-shockwave-flash" data = "stream - header.swf" width = "1024" height = "180" >

  <!-<! [endif]-->

  < param name = "quality" value = "high" >

  < param name = "wmode" value = "opaque" >

  < param name = "swfversion" value = "17.0.0.0" >

  < param name = "expressinstall" value = "Scripts/expressInstall.swf" >

  <!-[if! IE] >->

  < / object >

  <!-<! [endif]-->

  < / object >

  <! - end .header - >

  < / div >

  < div class = "sidebar1″" >

  < ul class = "nav" >

  < li > < a href = "index.html" > HOME < /a > < /li >

  < li > < a href = "courses.html" > CLASS < /a > < /li > ""

  < li > < a href = "flow_music_method.html" > FLOW MUSIC METHOD < /a > < /li > ""

  < li > < a href = "feedback.html ' > COMMENTS < /a > < /li >" "

  < li > < a href = "resources.html" > RESOURCES CHOISIES < /a > < /li > ""

  < /ul >

  < img src = "eve_photo.jpg" width = "180" height = "270" alt = "Eve Newsome" > "

  Newsome of Eve < p > < /p >

  <! - end .sidebar1 - > < / div >

  <!-TemplateBeginEditable name = "EDITABLE"->

  < div class = "content" >

  position 1 of < h1 > < / h1 >

  < /p > < p > content

  section 2 of the < h2 > < / h2 >

  < /p > < p > content

  <! - end content - >

  < / div >

  <! - TemplateEndEditable - >

  < div class = "footer" >

  < p > E-mail: < script type = "text/javascript" >

  <! [CDATA]

  <!--

  var x = "function f (x) {var i,o=\"\",l=x.length;for (i = 0; i < l; i += 2) {if (i + 1 < l)" o += ' +}} "

  "x.charAt (i + 1); try {o += x.charAt (i) ;} catch (e) {}} return o ;} f (\"ufcnitnof (x_ {}) av" +)

  «r,i=o\\\"\\\"o,=l.xelgnhtl,o=;lhwli (e.xhcraoCedtAl(1/) = 3!» 84 {) rt {y + xx = l; = +;}} » +

  «tahce lc} ({})}} (r = I - l;» {1 > ox + i0 = i ;--{}) = c.ahAr (t) i}; erutnro s.buts ({r, 0lo ;) f} ' \ ' +)

  "------" (0) \\\,9\\\";1_W2B03\\\EU35\\\01\\\00\\\U300\\\00\\\02\\\ +.

  '\\\23\\\05\\\00\\\36\\\00\\\00\\\rM\\\03\\\07\\\03\\\"+ '.

  '\\\4J01\\\32\\\02\\\00\\\16\\\0E\\\17\\\00\\\00\\\13\\"+ '.

  "\\0r\\\a#1|00\\\-937\\\0y\\\4,!7 <: q1;? (n.>\\\"\\\\\\\\\\\\#" +

  'i/$7)00\\\6a03\\\%|JSHT33\\\00\\\03\\\UeUX33\\\0X\\\SZ\\ ' +.

  "\\\@DmFFIZEB_@HFR30\\\0N\\\sT|w9q$Fr~}dr43.a8hbbx~xs &"hvina\\\ "+.

  « d (\\\ "} fo ; ((uret n} r); +) y + ^ (i) t (eAodrCha.c (xdeCoarChomfrg.intr=So+7;12%=;y=iy"+))

  "(+0) == (iif) {++;}" i < l; i = 0 (ior;fthnglex.l=\\\,\\\"=\\\",o iar {vy) x, f (IOTC n' +)

  "un\\\"f)\")"                                                                 ;

  While (x = Eval (x));

  ->

  []] >

  < /script >

  < /p >

  < p > & copy; Eve 2013 Newsome < /p >

  < p > < script type = "text/javascript" >

  <! [CDATA]

  <!--

  var x = "function f (x) {var i,o=\"\",l=x.length;for (i = l-1; i > = 0; i--) {try {o += x.c' +}}}"

  "(i) harAt ;}. {catch (e) {}} return o ;} f(\") \\\"function f(x,y) {var i, o =------"------" '+}

  "(\\\,l=x.length;for(i=0;i < l; i ++) {if(i<97) y ++;} '. y % = 127; o += string.fromCharCode(0)) ("+

  "x.charCodeAt (i) ^(y++)) ;}. return o ;} f(\\\"\\\\\\\\\\\\006\\\\\\\\013\\\\\\\\0" +

  "05\\\\\\\\035\\\\\\\\007\\\\\\\\t\\\\\\\\000\\\\\\\\004\\\\\\\\\\\\\\\\\\\\" +

  "\\\003\\\004\\\021\\\016\\\031\\\022o+';h+e} you (K;" +

  « v | vMWJ\\\035NGHA_CGXQZNT8\\\003\\\ "------* (------"\"+).

  « ! A2 < 8 h *. ? 5\\\004\\\000\\\021Z\\\033\\\016WO\\\ ' + '.

  ' $006\\\026\\\027\\\023\\\034\\\010\\\024glX (~ "+).

  "(EZ|w) J:My|\\\000fAVO@F\\\tHR\\\014jBJ^_\\\022cFZ^VKRCg\\"+ "

  "\\\036\\\003iZ\\\"\\\a\\\006 & 7!) 3k\\\013 h +! + ! ' > q +.

  "\\\002!" = 7$ 3 ft = c | v [QY\\\ "\\\,97) \" (f} ;) lo, 0 (rtsbus.o nruter} ;) I (your "+)))]

  "rahc.x = + o {)--i;} '. 0 = > i; 1-l = i(rof}}{) e(hctac};l=+l;x=+x{yrt{) = 94!) 31/l(tAedoCra"+)

  "hc.x (elihw;lo=l,htgnel.x=lo,\\\"\\\"=o,i rav {}) x (f noitcnuf\" ")";

  While (x = Eval (x));

  ->

  []] >

  < /script >

  < /p >

  <! - end .footer - > < / div >

  <! - end .container - > < / div >

  < script type = "text/javascript" >

  swfobject.registerObject ("FlashID");

  < /script >

  < / body >

  < / html >

  Thanks for any help offered!

  Hello

  I can fully confirm the suspicion of Mike to charge to the top of your website to your server and send us the link so that we can better analyze. Maybe your swf file is broken. To support this, you can insert another swf file that actually works.

  On the other hand, sometimes a lower version of swf works better. Please try... swfversion' value = '6.0.65.0' > to see what is happening.

  Hans-Günter