Toshiba NB250 done by clicking on its intermittent

Similar Questions

• Operating system not found on Toshiba NB250

  Hi all

  I have bouth Toshiba NB250 with legal Windows 7 Starter. 2 days ago I was on the internet my Nooteboom gel and I decide to reboot. I restart and OMG - there was only a black screen with cursor flashing after then it shows me that "the operating system does not.

  I have no backup of my windows, and I'm not taken... I know nothing about the HARD recovery disc but when I try to do it tells me there is no recovery. I decided to reinstal windows starter with USB and I create bootable Win 7 Starter. The problem is im reached the place where I can format my HARD drive, but is not avalibale

  Downstairs, I see that windows cannot install on this disk and advice me to load the drivers. I've done here to download the AHCI drivers but it tell me that these drivers are not compatible. The HARD drive I see as "non localized) and I guess my partitions are down or... I don't know." I have try other drivers for my Toshiba but I can reach that place before the format. and that's.

  Please advice what to do.

  > I restart and OMG - there was only a black screen with cursor flashing after then it shows me that "the operating system does not.

  It seems that the HARD drive is dead its defective and must be replaced sorry mate but it looks like you lost all the data that has been stored on the HARD:(j'espère que vous avez créé une sauvegarde de données dans le passé autrement je n t voir n'importe quel autre était à récupérer les données.) drive

• Impossible to install Vista on my Toshiba NB250 - 10G

  Hello. Toshiba NB250-G, part No. PLL2XE-001001EN origin with win 7 32 bit.

  I try to install Vista for compatibility with the family machines. The installation proceeds to the collection of files and then stops with the following message appears:-error code 0 x 80070070 Windows cannot copy files required for installation etc etc. I suspect that the need for a pilot to precede the windows files.

  Can someone help me, please?
  T I J

  Hello

  I checked the Toshiba download page, and as I can see your machine is not supported for Vista. It relies for Win7 32-bit only, so, in my opinion, it would be better to stay with Win7.
  I don't know what kind of compatibility is important to you, but there is not much difference between Vista and Win7.

  I assume that you have created the bootable USB key with Vista. Start the Vista installation wizard is recognized correctly HDD? You can create or choose the partition where the OS is to be installed?

• How can I configure Windows XP Home for a Toshiba NB250?

  Hello

  I have a toshiba nb250 with a pre installed win7 starter.
  But I need a windows XP on this machine, and I can not configure it.

  How can I do this?

  Have you consulted the Toshiba download page if your machine is supported for Windows XP Home edition?

• How to restore Toshiba NB250 to out of the box?

  I have a laptop Toshiba NB250-108, is a German keyboard layout if it makes a difference. I have no CD drive or the DVD software.
  I tried the system restore to out of the box several times with no luck, hold 0 (zero) button on start up, but only takes me to start modes.
  Any help would be thank you very much.

  > I have tried restoring the system to out of the box several times with no luck, hold 0 (zero) button on start up, but only takes me to start modes.

  try pressing f8 at startup

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  If you can not start a recovery procedure, it means sth wrong with it (deleted/moved)

• Don't click apply to change the settings?

  Hi all

  I have a flight stick Speedlink that use with FS2004 - I want to disable the vibration as it does my head! However, I sail for device parameters in the sim flight itself or devices and printers, making changes in properties but I can not click apply - its there but used in output. All I can click is OK and does not change the settings.

  Any ideas?

  Thank you

  Dan

  See if this will help

  SPEEDLINK FAQ

• I try to install indesign and illustrator (30 days free trial), but I don't see anywhere on my computer? I don't know if its there. How can I install it correctly?

  I try to install indesign and illustrator (30 days free trial), but I don't see anywhere on my computer? I don't know if its there. How can I install it correctly?

  Have you installed using creative cloud? You can use creative cloud application to install Illustrator CC CC of InDesign 2015 2015. Please try: https://helpx.adobe.com/creative-cloud/help/install-apps.html

• Windows cannot complete the installation - Toshiba NB250

  Hello

  My netbook has been sitting not used and the road for about 6 months.
  When I tried to use it the other week he was very slow and kept crashing so I tried to erase the unwanted programs from him but I couldn't.

  The netbook kept crashing whenever I tried to uninstall programs and try to do something about this, even open internet explore took about 5 minutes, it's faster on 15, laptop of my father who has a huge 256 MB of ram in it! I gave up and decided to restore it to the factory settings. I found Toshiba HDD recovery option and follow the instructions.

  The way in which the process a window pops up saying "Windows could not complete the installation. To install windows on this computer, restart the installation '. I clicked on OK, all in all I rebooted the machine about 6 times with the same message.

  I tried to boot into safe mode and in the 5th test (previous 4 raised the same message) I "cannot start Windows.
  A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc, and then restart your computer
  2. choose your language settings, and then click "Next".
  3. click on "repair your computer".
  File: \windows\system32\config\system
  Status: 0xc00000e9
  Info: Windows could not load because the system registry file is missing or corrupt.

  Now, I bought a new USB drive and booted from that. The first time it kept freezing during configure them then wouldn't start at all. The second date he kept freezing and then took more than an hour to load windows. I left it for a few days, came back to him and all I could get is a black screen with a white cursor. I now need the netbook for Monday so try again.

  For tests 3 and 4 I run through gentle but end upwards with ' Window3s could not complete the configuration of the system. An attempt to take over the configuration, restart the computer. »
  Been several times since both trying without success. Currently looking for a hammer...
  There are now two different options for operating system on it, I tried both, but get the same answer at the same time.

  Someone has an idea, what happens?
  My warranty is I think (is there a way to check?
  I don't remember when I bought it! It was last year or the year before) so I don't think I can get any help from anywhere.

  Hello

  It is not easy to say what the problem is here. If the recovery image and HARD drive are OK, you should be able to install recovery image and use your neetbook with the factory settings.
  When you've got this netbook as a new machine, I assume you didn't create recovery USB support. Can you confirm this?
  > Now, I bought a new USB drive and booted from that.
  And what is recorded on this USB key?

  I can't say with certainty what the problem, but now you should test original recovery image installation and see what happens. In case the same thing happen over and over again, the problem may be related to the HARD drive.

• Firefox does not start when I click on its icon. As far as I can see, all the program files are present.

  Firefox functioned perfectly earlier today. Tonight, when I tried to start Firefox as I usually do by clicking its icon in the quick start of Windows 7 bar there is no frequency. The same thing happens when I click on the application icon in Windows Firefox program folder. Is some way this can be fixed easily?

  I ran a full scan with Norton 360, Malawarebytes and Iobit Malware Fighter, whose no is no problem. Also, I checked the settings of Norton 360 and found no problem with the settings of Firefox. I downloaded the Firefox installation files and ran a custom implemented, by clicking on upgrade. Firefox now works well with all the Add-ons, bookmarks, history, cookies and saved passwords intact.

• CD/DVD drive clicks even its empty

  because I've had my turn, and it's less than 2 weeks, my heart DVD sound even thought it is empty...
  I heart it a lot from time to time «about every 15 minutes or 30"»

  It's weird! and is this a problem, so I get the warranty?

  Sorry, but it is not easy to understand your ad.
  You should contact Toshiba service in your country and clarify this strange problem.

  I don't understand you at all.

• Ive just got two emails from windows live but I don't know if its for real or a scam can you all help me

  Here are the details of amount this is the link he wants to send you https://login.hotmail.com/config/login_verify2?puser= * address email are removed from the privacy *.

  That's who he had to * address email is removed from the privacy *.

  Hello

  Another scam.

  Please read this Microsoft for information about these types of scams.

  "Scams by email or web: how to protect yourself.

  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx

  Scams can contain the following:

  • Alarmist messages and threats of closure of the account.

  • Promises of money for little or no effort.

  • Treats as its too good to be true.

  • Requests to make a donation to a charity after a disaster that has been in the news.

  • Bad grammar and spelling.

  How to report a scam

  You can use Microsoft tools to report an alleged scam.

  • Internet Explorer. While you are on a suspicious site, click on the gear icon, then tap on Security. Then click on Report Unsafe website and use the web page that is displayed to inform the Web site.

  • Hotmail. If you receive a suspicious email message that asks for personal information, click on the checkbox next to the message in your Hotmail Inbox. Click on mark as , then point to Phishing scam.

  • Microsoft Office Outlook. Attach the suspicious email message to a new e-mail message and send it to * address email is removed from the privacy *. To find out how to join an e-mail message to an e-mail message, see attach a file or other item to an e-mail message.

  See you soon.

• When my husband click on its icon to play games or the OS work beeps help!

  It is difficult to hear the beeps do not bother him but Magic Jack has been on its icon (by me) and it won't... just beeps the unpleasant tone.

  Hi famedsnake6,

  1 - is the computer beeps when you try to open any program using their icons?
  2. don't you make changes recently to the computer?

  How to ask a question
  http://support.Microsoft.com/kb/555375

• My microphone does not work... I don't know if its vista, taken mic or other things... plsss help

  Hello! I got a Dell Inspiron MXC061 Windows Vista Home Premium laptop and recently, I figured out that the micro does not work... If I plug headphones the headphone is ok, but the MIC does not work... I already tried to use the headset in the other pc and it works well, so is not the break-in cover that has a problem... and I tried to check and adjust the microphone on the check of its menu - recording - microphone/line (Sigmatel High Definition Audio CODEC)--> is the only player that is on the menu for registration and it says work... I have already also check the properties - levels are already up... but when I try to set up and go to the speech recognition he can't hear me when I try to talk... I don't see the moving bar or the micro displacement level while I am speaking... If the microphone does not work Green right move?... I don't know if it is vista, taken mic or perhaps incompatible things... or do I need to install another driver?... is it possible?... I really can't understand... someone can help me on this!... Please... Thanks in advance...

  processor - Intel (r) Core (TM) 2 CPU T5300 @1. 73 GHz 1.73 GHz

  1014 MB

  32 bit OS

  
  

• Don't click on Windows Store tiles and cannot upgrade to 8.1

  OK, so I worked with windows 8.1 and I believe that it has been registered with the product code and everything, but my flash drive suddenly stopped working, i was not able to repair and so I REFRESH my PC, it says it will be windows 8 and I could reinstall 8.1, and so I did.

  After a while everything worked, but now when I try to go to the store windows to update to 8.1 he says initially from window update and so I did, but now when I go to the store I can't click on any tiles on the home page, as the upgrade of Windows 8.1 , or all the apps.

  I tried the wsreset.exe thing, but it didn't work. If there is no way to fix it, is there a way to download windows 8.1 without windows store.

  Help me thanks in advance,

  AlenA333

  Thanks for the help but I already fixed it, I've done it before you answer, sorry to bother you, I could not fix it manually, and so when I went to a tutorial on Microsoft on how to add users, he said about the upgrade windows 8.1 lower and he went to the update page and now I can click on the store It had to be a bug or something, thanks anyway

• Edit should only be done after clicking on the button

  Hello!!
  
  I use jdeveloper 11.1.1.5
  I had created an af:table and have also a button change.
  
  Unless my user clicks on the button change should not allow the user to enter the value in the table.,.
  
  For example; Before changing af:table disable = true after clicking on change disable = false af:table

  Why you don't just change EditingMode for your table to the clickToEdit