Toshiba Satellite P70 - response about the service of warranyt

Similar Questions

• Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

  Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

  Hey James,.

  I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
  OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!

• Toshiba satellite C655-S5128 and the sound goes in and out

  I have a toshiba satellite C655-S5128 and the sound goes in and out, I have to click the button on the lower right side speaker so that he works for a very short minutes the out again once and I have to repeat this if I want sound, iv tried all the troubleshoting there can anyone help?

  
  
  
  
  Please write me help * address email is removed from the privacy *.
  
  
  Thank you, Laurie

  Hi jthoodrat,

  Run the difficulty in this document to resolve common sound problems in Windows.

  Let us know if that helps.

• Toshiba Satellite Pro A10, Windows XP Service Pack 2

  Hello world
  "I have a ' Toshiba Satellite Pro A10: P4 - M 2.2 GHz/XP Pro/15" TFT/40 GB / 768 MB.
  I have installed Windows XP Service pack 2 in my book.
  After the update to Windows XP SP2, the only way to start my computer after putting in "sleep mode" or "hibernation mode" is witch power off and then start up.
  I reinstalled "Toshiba Power Saver", but nothing came of it.

  What can I do about it?

  Kind regards
  Krasteff

  Obviously the Service Pack 2 does not match current preinstalled saver.

  First installation, you have is to wait for an updated version of Toshiba Power Saver, which is XP Service Pack 2 tested. But so far, you have no "Standby" or "hibernate".

  Installation of the second. If you need to "Standby" or "Hibernate" feature, uninstall Service Pack 2 and wait until there is a solution to the problem of energy saving.

  The two sounds is not perfect, but I think the second installation is the best way. Toshiba will surely bring a new Service Pack 2 tested Power Saver version.

  Good bye

• Satellite M30: Questions about the battery, SD, energy-saving card reader

  1. After looking through the forums, it seems that my problem is not uncommon: my Toshiba Satellite M30 seems to have a life of the battery for about 10 minutes. Power not connected to the adapter, Windows detects 100%... 99%... Then 3%. Throughout the life of the battery is about 10 minutes, and I don't know why. Does anyone know? (Info from BG: laptop about 2 years, not too used)

  2. How will I know exactly WHAT model of Toshiba Satellite M30 I? (There is a code after the M30-part - I need this to find out what batteries I need to buy to replace)

  3. What is the nearest Service Center, I can talk to the United Kingdom with regard to my battery problem? From Toshiba Web site lists 20 companies different with Toshiba in them to the United Kingdom, and I have no idea which we touch!

  4. my SD card reader is a bit faulty. To put a SD card, no message appears to recognize the card - the laptop just doesn't recognize at all, and I do not see "SD card" or equivalent in "My Computer". However, if I put an SD card, and then restart the computer, I can see the SD card, it simply does not update while the computer is on, when I restart - cures for this?

  5. Finally, can I download the software of management of TOSHIBA POWER SAVER? I downloaded from this site but right now the only option when I open the TOSHIBA CONSOLE is 'Mouse' - there is no standby power options or network options or anything.

  Thanks in advance, sorry there are so many questions and they are so different!

  Cheerio,
  John

  Hello

  1) looks like a dead battery. It s not unusual that the battery will discharge performance after about 2 years. As far as I remember, you can load and unload the battery for about 500 times. After this period, the lifetime battery decreases faster. The same symptom occurs for example with a cell phone battery. I think you should ask the new battery Toshiba service partner. PS: The guarantee covers the battery for about a year.

  (2) it's very easy at the bottom of the unit, you will find a label with the serial number and the name of detailed specifications.

  (3) visit this site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true
  You will find the database with ASP together all over the world. These guys are responsible for replacements, repairs, etc.

  (4) number of SD card is very strange. On my Satellite SD card window opens if I insert the SD card. You can try to remove the SD card from the Device Manager reader and after that new reboot, the OS should has new charge card CD driver. Eventually, it helps.

  (5) I don't know what you mean exactly but on the Toshiba driver page, you will find the tool power Toshiba compatible and taken in charge. If you have downloaded from the area Sat M30 driver so I think you can use it only on this laptop.

  take easy B-)

• Satellite P70-A01D: change the drive letters after the 2nd SSD upgrade

  I think it's a generic UEFI / Win 8.1 question (not according to model).

  However, FWIW, I have a Satellite P70-A01D (bought locally here in Australia).

  It is a victory of 16 GB 17.3 inch Gen4 i7 4700MQ Intel HM86 8.0 64-bit RAM.
  http://www.MyToshiba.com.au/products/computers/satellite/P70/psplpa-01d002/specifications

  I updated the OS to Win 8.1

  The P70 is supplied with a drive Bay HARD vacuum #2 - I bought a 250 GB Samsung 840 EVO SSD that I want to use as the main system disk / boot Win 8.1.

  I installed this SSD in bays #2 and from there I had no problem using the wizard of Samsun cloning software provided with the SSD (VCC 4.0) to clone my 1 TB on the SSD system.

  There are a lot of instructions from Samsun and around the web on how to clone and "substitute" of a HDD with a SSD - however there are much less when it comes to 'Add' the SSD - in the #2 Bay - while always keeping the original HDD fully functional as an additional drive.

  After execution of the cloning software, I tried just go into the settings of the UEFI on reboot and change the order of the boot drive placing the SSDS over HARD drive.

  It worked but there are obviously questions still as I had not renamed readers SSD worked as system but he was editing as D: and HARD drive was still C: and most of the system/application paths were always scheduled to access C:!

  It led to the crash and restart cycles of the Bureau (? & or explorer.exe?) and two consistent error messages:
  -"SkyDrive engine Sync host has stopped working".
  -"Host for the synchronization setting process has stopped working".

  I saw in the Control Panel-Administrative Tools-Computer Management-Online Storage-online-online right click on each drive disk management online online that I can access > however
  (a) I'm not sure if the solution I need is this simple;
  (b) nervous about change of letter on a disk while running the system; and
  (C) uncertain steps in order of evolution [IE. C: (non - sys) becomes M; D: (sys) becomes C:...

  At the moment via UEFI I'm back to working with the system on the HARD disk rather than on the SSD seems stable and without compromise of my screwing around!

  Apologies for the long post by train to make sure to include all relevant information. I think that my final goal is double win bootable 8.1 / Ubuntu 12.04 of the SSDS probably with Ubuntu on a 50 GB partition leaving 200 GB (enough?). I want to keep a slab of SSD space available for photo and video editing: +/-100 GB!

  I wondered simply assign new letters to readers, however the notes at the bottom of http://windows.microsoft.com/en-au/windows7/change-add-or-remove-a-drive-letter state:

  You cannot change a drive letter if the drive is a system partition or a boot partition.

  Suggestions please?

  Hello

  I think you could try to change the letter to readers as suggested in the Microsoft article.
  Where this is not possible, try to use 3rd party such as GParted software.
  http://gparted.org/LiveUSB.php

  You could try changing the drive letters might start to the top of the unit using the live USB version.
  But it might be possible that your system would not initialize correctly after this change.

  So you should not forget to mark the partition as bootable.

  Your comments would be appreciated

• Satellite L40 - question about the CPU temperature

  Hello

  I have a Toshiba Satellite L40 17 Q with Intel Celeron M CPU.

  The usual device temperature is about 60 degrees Celsius. I read that the Tj to this type of processors is 100 degrees Celsius.

  So my question is dedicated to the owners of laptops equipped with Intel Celeron M processors and of course for the hardware gurus.
  Is the operative temperature of 60 degrees Celsius of normal, and if not how do I decrease.
  My laptop is new and I make sure that the air flow openings are not jammed.

  Thank you in advance!

  Hello

  Don't worry, the CPU temperature. 60 degrees Celsius is certainly within the normal range, and there is no reason to worry about this. On my laptop Tecra, I noticed the temperature CPU about 62 degrees Celsius and drive HARD around 40 degrees Celsius.

• Toshiba Satellite L50 - B of the Bios date and time to reboot

  Hello.
  I have Toshiba Satellite L50 - B for more than a year. I upgraded the RAM to 8 GB and it works fine. But the last 10 days of the BIOS date and time keeps restarting by default whenever I turned off or in hibernation laptop. My battery is dead, but I'm not, it reloads all the time and restart the BIOS after that I have unplug the phone charger. I think that the CMOS battery is dead, but when I open the laptop there is no CMOS battery. Someone told me that this model has a kind of Flash for the time of the bios chip. How can I fix it?

  Get a new battery and will be all good.

• Satellite M40: Question about the installation of the driver

  Dear Toshiba

  I have Toshiba Satellite M40, when I installed with win Xp recovery CD, I found everything is ok except the following:

  When I go to 'connection area action' and press 'install' botton to install client for netware... I have the following message:
  "unable to find the drivers for this device...". If you have a disk that contains the driver update or windows search click ok"

  Help, please
  Thank you

  Hello Mohamed

  It seems that your laptop is trying to install the network driver, but the operating system can find t he or you the driver source is false.
  In this case you must download from Toshiba Web site network driver and install it.

  Good bye

• Re: Satellite A200: Question about the Windows Vista serial key

  I have a Toshiba Satellite A200 and I doubt, in everest, I can see the key of Windows Vista, but it's different to the Windows key in the tile to the bottom of the laptop.
  I change anything in the laptop because I bought, I have use once the recovery cd, but I have not a pirate key or something like that.

  Why this different key?

  Post edited by: Admin

  I agree with the user above.
  The serial key you will find at the bottom of the device is not similar to the serial key that can be read using a few 3rd party applications!

  But you don t need such series on your Toshiba laptop key.
  The restore CD contains an image of Toshiba which is already activated!

• Satellite P10: Question about the limits of upgrade of RAM and HARD drive

  What are the limits to upgrade my laptop Satellite P10? Currently, I use 1 GB of RAM (2 x 512) and I still have the original 60 GB 4200 RPM HARD drive. I'm mainly interested in upgrading my hard drive to at least get a 7200 RPM 100 GB disc. Better would be one of the ones 24 hours server as Hitachi HTE721010G9AT00, I have just turned off my computer. Which one to take and are there limits (BIOS) (keeping in mind that there will be 200 and even the 250 GB drives next year)?

  RAM: should I put two 200pin SO-DIMM 333 or 533 or should not change at all as it works very well and stabil now?

  Hello

  In my eyes you should follow the guidance of Toshiba line and must use the memory modules that are recommended in the user guide. But if you can also try to test with 400 Mhz or 533 Mhz. I think that each dealer notebook or memory could do that.

  I think the BIOS might be able to handle the hard drive with capacity of 30 GB / 40 GB / 60 GB / 80 GB, Bus Master IDE with ultra DMA 100 synchronous
  In my opinion the BIOS does not recognize the larger HARD drive.

• Laptop Toshiba Satellite, could not find the product

  I get a Toshiba laptop, it is an old laptop, but I like it.
  S1700-500, said the mark on the bottom of the laptop.
  Model No.: ps170e-000ux-g3

  It has a CPU celeron 700 MHz, 64 + 64 M SD RAM and so on.

  I have 3 question, if anyone can answer me!

  1. where can I find the website of the service for this laptop?

  2. a module of memory can be removed, the amount of memory can I put there? (If I buy a laptop 512 MB SDRAM, it will work whith it?)

  3. it has a Ni-Mh, DC9.6V and 4500mAh battery, it is an old and cannot work with it for a minute... Can I replace it? Can whitch models I use? It has a Li-ion battery? In Hungary, where can I buy a battery for it?

  Hello

  the European Toshiba Service Page is Http://eu.computers.toshiba-europe.com/

  This laptop works with 192Mo memory max.

  The order Codes for memory are:
  128 MB is PA3005U
  64 MB is PA3004U

  hope this helps you

• Satellite 2410: Question about the different ways to use BlueTooth

  Hello

  I can't find a place to buy a bluetooth module for my Toshiba Satellite 2410 - the manual says I can, and I know that there is space on the underside of the laptop to insert it.

  I can't seem to find one to buy - anyone know if they actually exist, because I'm starting to think not? ! .. .where is the best way to bluetooth enable laptop to buy a USB adapter?
  If so, a good market will affect the download speed when using the Internet? And what is the difference between an SD card and a USB bluetooth adapter?

  Any help would be appreciated.

  Hello

  I don't know your name of your Satellite 2410 but I found that a similar Satellite 2410 603 on the Bluetooth device is not available. Only the WiFi card is optional. This means that it is possible to install a wireless network card. The slot for the update of the Wlan card you will find at the bottom of the unit AND NOT the Bluetooth slot.

  However, if you want to use BT technology so the easiest and cheapest way is to buy the USB Bluetooth key.

  PS: BT has nothing to do with the internet, and it has no negative influence on the data downloading or transmission of data from the internet.

• Satellite P850 - wonder about the accelerometer pilot description

  I was delighted to see an accelerometer for the P850 pilot in the driver downloads.

  I was also happy or sad to find that it was really a hard throttle.
  There must be a correction of the description, or the correct driver should be loaded.

  I assume you mean the [utilities accelerometer | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 152 & selProduct = 7507 selSh ortMod = null & language = 13 & selOS = all & selType 216 = & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = 216 & page = 1 & ID = 88083 & OS ID = 46 & driverLanguage = 42]

  Description says:
  + These utilities are a set of utilities of material working with motion detectors built into your machine. With the accelerometer, your machine will be able to detect the position you hold your computer at any given time. You can set the machine to perform a specific function when the device is tilted quickly left or right, either at the front or back. You can also take control of the cursor in some applications and move by leaning the PC in a certain direction. +

• Toshiba satellite, no noise all the indicators don't show n no problem?

  I have a toshiba satellite A 135 S4407, there is no sound, ive downloaded drivers etc all indicators say everything is ok?

  Hello angelocotto,

  If you have already install the drivers and still does not work, the issue may be caused by the sound card. I suggest you follow the link below and run the troubleshooter and check if you are able to resolve this problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  If the sound card is not detected on the computer, you will need to contact the manufacturer of your computer to help you better that the issue may be related to material:

  Thank you
  Irfan H, Engineer Support Microsoft Answers.