Toshiba WT8 - Has PDW09E vs PDW09V - differences?

Similar Questions

• Toshiba WT8-A-102 - power problems

  Toshiba WT8-A-102 PDW09E - 00100EEN

  Hello

  I tried to lift a warranty call, but got stuck in a loop Q & A who dropped out, and he presented me with an e-mail form. Completed with all relevant details, but I have received no acknowledgement of receipt of email.

  Anyone know of a SIMPLE way to just raise a ticket, under warranty, for a Tablet where I've got the S/N and P/N and the documents on file command?

  Tablet of my son is still under warranty - he ordered at the end of February of last year and was received in March - but now we'll have problems with it. More often than otherwise, if my son or I press the power button briefly, we get the Toshiba POST screen until the power turns off.

  We even left the tablet in a cradle of office when it turn, so the charge cable and tablet itself does not move between attempts - and sometimes it'll turn on leaving us after many attempts where nothing happened when we pressed the button.

  We swapped with known good cables, so we know that's not the issue.

  On the rare occasion, it stays energized long enough to go to the login screen it still can't do anything with him because the power turns off as soon as the CPU put under any load. Once Windows says that the battery was at 0%, but load. I left it for 15 minutes and it's always 0%. I then put to some Windows updates without disturbing the laptop or power cable and the power cut out less than a minute later. For obvious reasons, this excludes the ability to perform updates BIOS; We simply cannot risk of bricking it.

  So any ideas? Personally I prefer to exchange it for a laptop and pay the difference, but I'd settle for a warranty repair, if only I had a way of presenting that would send me an email back!

  Your tablet is still under warranty, it's good news because in the event of hardware problems, should be set the Tablet for free.

  What you have to do now, is to contact the Toshiba authorised service provider in your country to organize the next steps.

  Here you will find the responsible ASP in your area:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Toshiba Tempro has stopped working

  Hello

  I bought a Netbook NB - 300 108 Tosh a couple of weeks. For these last days I receive an error message when you start "Toshiba TEMPRO has stopped working", this also happens if I try to start Toshiba bulletin board of the icon.

  I just of downloaded Tempro and reinstalled, but the problem is still there.

  Can anyone help please?

  PS - Win 7 starter operating system

  Hi noakes,.

  I think Toshiba TEMPRO isn't so important. This tool will inform you of updates (pilot) only and install them. This is not necessary if you are satisfied with your laptop and install Windows. For example, I removed Toshiba TEMPRO.

  But the relocation of it should work. Try to clean your registry using CCleaner.

• My Toshiba T110 has a keylock at the left rear. How is it supposed to work?

  Toshiba security lock,

  My Toshiba T110 has a keylock at the left rear. How is it supposed to work?

  Check with Toshiba support or the manual that came with your computer.

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

• Toshiba WT8-A-102 - platform driver to win 10 missing Intel

  TOSHIBA - I REQUEST - THIS IS WHERE INTEL PLATFORM DRIVER FOR WINDOWS 10!

  Status on the page of the driver Toshiba Windows 10 has changed.
  Now, he said: supported model, all of the software available for the upgrade to Windows 10.
  Details: Your PC selected Toshiba is supported for upgrading to Windows 10. All of the software to upgrade is now available. (September 24, 2015)

  ALL SOFTWARE?
  It's ridiculous!
  Nothing has changed - it is not nothing added / updated.
  That status has been updated!

  So Yes - when you want to do a clean install of Windows 10 in Tablet - don't forget that there will be many difficulties / problems as Windows 8.1 Intel Platform Driver, some drivers in Lenevo site installation and some on HP site...

  And besides - Lenevo released drivers for WIndows 10 for their (very similar to even the series) tablets.
  HP also released drivers for HP stream 8 tablets series

  Oh, Toshiba - watch and learn from the best:
  http://support.HP.com/us-en/drivers/selfservice/HP-stream-8-tablet/7439999/model/7682267#Z7_3054ICK0...

  I'm sure that in the only thing Drivers Toshiba development section that make workers is eating donuts and coffee to drink...

  NICE 'SUPPORT' TOSHIBA!
  This is my first and last Toshiba product, because the support is really bad...

  Message has been changed: image has been deleted - bashing

  So Yes - when you want to do a clean install of Windows 10 in tablet...

  Toshiba supports Windows 10 UPGRADE on this tablet.
  Upgrade means that you must upgrade the current system Windows 8.1 to Windows 10 using the Microsoft upgrade procedure.

  Most of the drivers and software that was preinstalled on Windows 8.1 is compatible with Windows 10.

  All other drivers and software that are not completely compatible with Windows 10 can be downloaded and updated from this page or by using the preinstalled Toshiba Service Station:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  In addition Intel drivers are designed and provided by Intel, and can be downloaded directly from the Intel download page

  By the way: there is already a thread of forum on the recall WT8-B-102 - experience with update Win10
  https://Forum.Toshiba.EU/showthread.php?84732

  User PL Légion has provided information of great experience:

  I can say this: everything works in Win10 and 8.1 (with Bing) on this particular model, if YOU DON'T TOUCH THE MY TOSHIBA UPDATE, SAVE for THE BIOS UPDATES. Don't touch wireless and others. Install the drivers from there WIN 8.1 made disappear from my WIRELESS card and I had to go back to the factory settings. I disabled this shit after that and this is upgrade to Win10. Everything works well: WLAN, cameras, etc.

  Here more info about 10 Windows upgrade:

  http://www.Toshiba.EU/innovation/generic/Windows10/

  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  http://win10upgrade.Toshiba.com

  Additional pages:

  Model Toshiba taken in charge for the upgrade to Windows 10
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG
  Models not listed do not support an upgrade to Windows 10.

  Microsoft also provides information on own upgrade on this page:
  http://www.Windows.com/windows10upgrade

  and you'll find all the Microsoft Windows 10 FAQ - Q & A
  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

• The backlight on the Toshiba 32W1333DB has stopped working

  I have Toshiba 32W1333DB, the backlight on the tv stopped working, if I shine a torch on the screen I can still see everything, after watching videos on this problem, that I could find was that it could be the backlight inverter.

  Can someone advise this has a TV, the TV works directly from the CPU, it is more than likely that the CPU has a defect, or is it possible that all LED bulbs have blown, any help or advice would be appreciated.

  Thank you

  Posted by ryanbern
  

  I have Toshiba 32W1333DB, the backlight on the tv stopped working, if I shine a torch on the screen I can still see everything, after watching videos on this problem, that I could find was that it could be the backlight inverter.

  Can someone advise this has a TV, the TV works directly from the CPU, it is more than likely that the CPU has a defect, or is it possible that all LED bulbs have blown, any help or advice would be appreciated.

  Thank you

  These models use LED backlight, so there is no inverter integrated in the game. Probably something wrong with the LED or the power supply.
  Suggest that contact Toshiba customer service for further advice.

• Toshiba USA has Windows 7 update / install the cleanup tools

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=Windows7

  Toshiba-separate driver & installation depending on whether other programs you do a new installation or upgrade of Vista.

  Not sure that these programs work with Euro models. I would to know if someone tests, try it. (it detects that I am always on vista and leave right now...)

  Hello! I tried to install the clean installation utility, he seems to recognize my model (which is the Satellite A 200 PSAECE), but I get the following error:

  Line 1:
  Error: The action requested with this object has no
  (this happens when he created the restore point)
  I'll see if there is new software for my model, because it seems that toshiba launches pilot

• Toshiba 20AF45 has a black and white photo

  Hello I have a Toshiba 20af45 TV which does not show the color image. I have a 3 color av cord and color 5.

  I tried to see if I can change it in the settings menu, but there is no AV input button The menu under colorstream only allows me to change DVD to digital television. I have a cable box as well attached to the television.

  Any help will be appreciated.

  

  Yellow video connector is plugged into the right place on your TV? I think you should link it on the left side.

  Check the photo, I am sending you.

• Toshiba 39l4353db has lost the smart menu function

  For the last two days I noticed that pressing the home button does not show anything more, but a white dot in the upper left corner instead of the service Cloud from Toshiba. I tried to remove the power and leave it turned off for a minute before starting again, but the problem persists.

  Does anyone else have this problem?

  Steve

  Posted by stevenlcroucher
  

  For the last two days I noticed that pressing the home button does not show anything more, but a white dot in the upper left corner instead of the service Cloud from Toshiba. I tried to remove the power and leave it turned off for a minute before starting again, but the problem persists.

  Does anyone else have this problem?

  Steve

  What SW version running on the set? If the latest version of 7.1.92.61.01.1, don't you RESET the game after that network update was finished?
  If this is not the case, can you please try?

• Toshiba A50 has an internal microphone?

  Help, please!
  Thank you.

  Hello

  THA A50 has only an external Mic output port and no microphone!

  Sorry!

• Toshiba 40RL953B has stopped responding to the remote control

  Hi all, my first post and this is a problem.
  I have a 3 years 40RL953B Toshiba tv that is not responding more to the remote and the buttons on the side, it is stuck on HDMI 2 port and works well with deviced plugged which, but I have no control of volume or something else.
  I was wondering if replacing the main Board it would heal or there at - it another way?
  The closest Toshiba repair center is 45 miles away and I don't want to spend a fortune on a 3 yr old TV that does not have the quality of great pic of anyway, but still, I don't want to just Chuck... 4
  Thanks in advance

  Hi all, I have a 40RL953B Toshiba 3 yr old 40 "Smart TV TNT HD, the problem is that he is stuck on HDMI 2 port and will not respond to the remote control or the buttons on the side. It does not work with something plugged into HDMI 2 but I have no volume control, it's ok when woking with a set-top box with no nut no good with the likes of a stick of fire from Amazon.
  What is a defect of the main card? Or y at - there a way to reset the system?
  Thanks in advance

• Method of recovery Toshiba - which has put in place is the best

  I bought a new laptop and on setting up it asks me to choose a method of recovery. The options are
  -Recover out - of - box-state (System Recovery Options are included)
  -Recover without changing the hard drive partitions
  -Get a custom size partition

  What is the best option to select?
  I think that the custom would be best once I have composed my recovery discs after the complete series but want to be sure.

  Can anyone help?
  Thanks smilee

  Hello

  -* Back to the out of box - the State (System Recovery Options are included) *.
  This Option affects your laptop in return, the factory default status. Partitions will be deleted and recreated, as it was the first start.
  Note: All data will be lost, and the HARD drive recovery Option will always be available, if you want to find your laptop again.

  -* Retrieve without changing the partitions of hard drive *.
  All data on the first partition will be lost, and the HARD drive recovery Option will always be available, if you want to find your laptop again.

  -* Retrieve a custom size partition *.
  All data on the HARD drive will be lost and the recovery of HARD drive Option is not available, if you want to find your laptop again. Make sure you have a DVD created for the future of recovery

  Here the FAQ
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

• Satellite A110-203: reinstalled Windows, then Toshiba software has disappeared

  I buy this model and operating system was in German (WIN XP), I reinstalled it on the English language, but I cannot find these options toshiba I got previous, as toshiba controls, power save etc... shortcut keys do not work either: browser, CD/DVD controls on the right side. I have had 2 drives with computer assistance and recover or something like that. Maybe it's something stupid or something easy, but I'm not one such expert, so please help :)
  Thank you

  Hello

  As mentioned above, you have installed a new Microsoft Windows without driver Toshiba and additional utilities.
  The device delivered, you have found a BONE completely with all Toshiba drivers necessary.
  Therefore, follow the link and choose the right unit. Download drivers, install it in good order and enjoy life ;)

  CU

• My computer toshiba laptop has a webcam that doesn't work. Less than 6 months

  I've only used the unit about 6 times and has always worked well until one day it didn't work.  my system is windows vista Home premium 32-bit.  I tried the update of drivers, reinstalling the software assistant camera and with the included disks system recovery.  He said drfiver open fail restart camera or computer.

  Hi hollywood1973,

   

  Welcome to Microsoft Answers Forums.

  First of all, I would say that you install the latest drivers for the integrated webcam site of laptop manufacturers and are looking for the latest drivers for the installation of the webcam it restarts the computer and check if it works.

  If the step above does not resolve the question suggests that you repair the software assistant camera on the control panel.

  Click on camera Assistant in the Panel control/programs/uninstall a program.  Click on the Camera Assistant Software. Then choose repair.

  If the steps above does not resolve the question suggests that you contact the manufacturer of the laptop computer for more information.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.