Totally new with noob questions

OK so im totally new to developing with Flex. My company uses flex to create RIA that work to read and write with SalesForce CRM. I use the salesforce toolkit and have an understanding of how everything works great base. what im trying to do is take the data which are entered in a text box and who present for salesforce. Currently, the first name, name and phone number are in the code. have created text boxes, I don't know how to take the value that is entered in one and make that equal to the value of its corresponding field.

like I said... total noob

If you are in ActionScript. FirstName = firstName.text should be fine, but in MXML and sometimes in ActionScript, you may need this:

VAC. FirstName = "{firstName.text}.

If this post has answered your question or helped, please mark it as such.

Tags: Flex

Similar Questions

  • Noob question: Playbooks all have the same performance?

    I know... noob question. I am to complete my first game PlayBook and before I submit the app store I wanted to make sure that hardware performance will be the same on all the playbook or will it be something because of the performance issues on a per-device basis? I hope that this will be similar to a console where you can expect stable performance. THX.

    All devices (currently) work the same in the same conditions.

    That does not mean, however, that you can treat it as a console.  A console runs only a game and nothing else (in general).

    The PlayBook can run multiple applications, and among other things, a user can 'Behavior of the Application' setting configuration Mode Showcase, default, or standby, what determines if your application runs or stops when it is idle.  If they are in window mode, they may have other things at the same time.

    To a first approximation, however, "even in the world" is probably correct, for now.  Don't forget there will be different tablets in the future, with specification different but compatible with your app... not quite like a console there where many games is basically orphaned (or requires a port) when a new generation comes out.

  • A computer brand new with windows 8 will not play GTA IV

    Separated from this thread.

    computer brand new with windows 8

    new computer game will not play GTA IV

    Hi, Freddy.

    Welcome to the Microsoft community. It seems that you are unable to play the game of GTA IV on your new computer. It may be difficult when a new computer is not the games.

    To help you with the problem, we need more information. Please answer the following questions:

    1. What happens when you try to open? Do you get any error messages?

    2. What is the brand and model of your computer?

    As this is a new computer, I suggest that you update the display card drivers and check if you can play the game.

    You can visit the manufacturer's Web site and download the latest drivers for the display adapter. For help, refer to this article. http://Windows.Microsoft.com/en-CA/Windows-8/all-drivers

    Response with above information to you help the better.

  • Problem with challenge Questions/Force Password reset

    Problem with challenge Questions/Force Password reset

    We have integrated the IOM - OAM 11g R2 PS1. When a new user is created through the console of the IOM and tried to login for the first time in the console of the IOM.

    -Accessible via Direct / url of the Web server on port 7777 (by OAM), framework for change of password is visible and challenging questions setting frame is not visible. In this case, I'm not able to reset the password due to errors (popup appears with "Houston-29000 unexpected exception caught:" error). Paste the contents of the log below:

    NOTE: ANY CUSTOMIZATIONS PERFORMED ON ISSUES CHALLENGE *.

    oracle.iam.ui.platform.exception.OIMRuntimeException: Houston-29000: Unexpected exception caught: java.lang.NullPointerException, msg = null

    at oracle.iam.ui.authenticated.firstlogin.model.am.FirstLoginAMImpl.changePassword(FirstLoginAMImpl.java:261)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at oracle.adf.model.binding.DCInvokeMethod.invokeMethod(DCInvokeMethod.java:657)

    at oracle.adf.model.binding.DCDataControl.invokeMethod(DCDataControl.java:2143)

    at oracle.adf.model.bc4j.DCJboDataControl.invokeMethod(DCJboDataControl.java:3114)

    at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:261)

    at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1635)

    at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2150)

    at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:740)

    at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:402)

    at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)

    at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)

    at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBinding(FacesUtils.java:176)

    at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBindingFromActionListener(FacesUtils.java:123)

    at oracle.iam.ui.authenticated.firstlogin.bean.FirstLoginValidatorBean.setPassword(FirstLoginValidatorBean.java:376)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at com.sun.el.parser.AstValue.invoke(AstValue.java:187)

    at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)

    at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)

    at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)

    at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)

    at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)

    at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)

    to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:92)

    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)

    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)

    at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1018)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:386)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)

    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)

    to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:117)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

    Any help.

    Thank you.

    I solved this problem, the problem is due to Bug ID # 17008132.

    Thank you.

  • First, I'm joining the forum with a question CS4 and CS5 Suite for Mac. Can someone tell me why it is NOT a place to submit a question as it is here?

    First, I'm joining the forum with a question CS4 and CS5 Suite for Mac. Can someone tell me why it is NOT a place to submit a question as it is here?

    Creative Suites Mac forum seems to be closed, so moved that Creative Suites Windows the Forum of Creative Suites "base".

    Then... Post your question and someone may be able to help... is your question about the installation of the old software on a new Mac?

    IF El Capitan Mac read below

    CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

    -which means you are trying to use CS6 and earlier at YOUR risk of having problems

    -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

    -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

    This information is a MUST to install old programs on Mac El Capitan

    -You can't get the same error message, but here are some links that CAN help with old programs

    -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

    Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

    -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

    -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

    -the guardian https://support.apple.com/en-au/HT202491

  • D.I. box noob question

    Hi all

    Sorry for the noob question, but I need something clear up if possible. I was about to buy a box for injection and then had a query on them, and if I actually could benefit in this scenario...


    Fig 1. is how I currently record.

    Fig 2. is how I would do it with di direct box

    diag.jpg

    My question is... in this configuration, the d.i. box would make a difference to the signal? or he would only make a difference if I was going to live guitar to box, the sound card?

    Thank you for all your help.

    In my opinion you have basically three alternatives for the recording of the guitar:

    1. get an amp excellent sound, recording with a microphone, or more, in a room of good survey.

    Challenges: you'll probably need a studio proper, or at least no neighbours, because it could become LOUD. It takes time and experience of mike a good amp and even microphones expensive (several). Result depends on the acoustics of the room more than you think.

    Another way here, is to get/build an isolation area around your amp, which will be a kind of micro studio for it, allowing you to play hard and with a good tone, but in a more controlled environment. Many advantages for this make. Unfortunately, the expense can also be 'pro' - but I don't know there are DIY solutions.

    2. record of the amp 'dry' via either its line (send FX will also) or use a ' soaking power allowing you to put the amp (some sounds so much better AMPS), but with a low volume in the room. You can connect the device of soaking directly, or give the speaker the "tame" signal and mike the amp without disturbing the neighbors that it now. Good power soaks don't come cheap (?). Dry recording, for example by not using mike, often sounds like this: dry. It depends on your style of music, but an electric guitar should probably be considered an acoustic instrument. Instead of a diaphragm in wood, it has a speaker. The sound, often, we want to achieve is an amp of good sounding in a good room, which is an acoustic sound. You simply cannot get to an exit row or direct to a soaking of output power (not president). He needs treatment.

    3 use a program like GuitarRig, Amplitube etc. No installation required, regardless of the size of the room and acoustic sound (except that the acoustics of the room always will affect listening!) or mike. The software simulates the amps, effects and even mic configurations; added the "airplane" that you will not get a direct connection. Once again, according to your style. If I were Bill Frisell or Jim Hall, i.e. anyone with an as most of their music very "naked" guitar sound, I probably does (but these guys have access to the great engineers too...), but in a pop idom / mixed rock with other instruments and certainly to do demos, that's actually what I would recommend. Especially for us space challenged who have neighbors and an infinite time either. No, you will not look like 'all the world'; It's garbage in French - garbage out as always (many are disappointed by the present, but some are happy, it is always the case)

    All you need is a sound card with an instrument of entry. If you have a * good * sound card already who is not entered instrument, you can consider a DI box. Otherwise I'd say it's redundant.

  • Blue square with a question mark instead of a picture

    I'm on Messages to use with your Mac - Apple Support.

    Instead of pictures (or), I get a blue square with a question mark in it.

    This does not happen with all Web sites, but I wonder why it's happening with an Apple site, and how I can see the photos.

    It sounds like a broken image link.

    Post a screenshot if you can, so that we can confirm. The page seems OK after a glance. Command + shift + 4 then do slide on the affected area, add the image to the desktop to this site via the camera icon.

    If you have browser extensions, disable them and repeat the test. Also try a different web browser if possible to see if it is the scale of the system or only Safari. Is - this Safari you use?

  • What is the yellow square with a question mark on the page OPTIONS of FireFox? Have a peak.

    There is a yellow square with a question mark on the FireFox OPTIONS / settings page.
    If the mouse enters it, it reacts like it is something to click, but no indication that it is.
    Is it supposed to be there and if so, why?
    He has a POINT of MARK BLACK inside the small SQUARE of YELLOW.
    Any help is appreciated.

    This is the help screen. Press the key.

  • In support, forum, signed in, where can I associate with the questions I ask myself? Years back, could get the RSS feed for the question. Always available?

    Where can I associate with my questions about my account? The search for user name does not work. A few years back, you could subscribe to an RSS feed for a question, yours or others. Is - this past, if so, why? How can you save the question, without saving your question text in a document and copy and paste into search? Version of FF 19.0.2.

    Thank you.

    Your messages will now appear in your profile: https://support.mozilla.org/en-US/user/225440

    You can also use the old method of "My Contributions" link: https://support.mozilla.org/questions?filter=my-contributions

    Is that it?

  • Mac Pro does not.  It has a box with a question mark?

    My Mac Pro has stopped working all of a sudden.  We stop for the night and the next day, we got a box with a question mark?  Any ideas?

    Hope this helps.

    OS X: on OS X Recovery - Apple Support

  • I get a folder with a question mark symbol when I turn on

    I'm giving my daughter my MacBook Pro retina (2013) so I'll try to get it to the factory settings.  I tried reloading ElCapitan and downloaded for half an hour and then says that the download failed.  This happened twice, and now all I get is a folder with a question mark symbol.  What should I do?

    Hey! Take a look at these articles Support from Apple and try basic troubleshooting steps.

    If a flashing question mark appears when you start your Mac - Apple Support

    On the screens, you see when you start your Mac - Apple Support

  • Safari on my MacBook Pro retina 9.0.3 15-inch Version 10.11.3 do not show images on some Internet sites. They appear for a fraction of a second then disappear with a question mark in the Center. The same sites work fine on Chrome and Firefox.

    Safari on my MacBook Pro retina 9.0.3 15-inch Version 10.11.3 do not show images on some Internet sites. They appear for a fraction of a second then disappear with a question mark in the Center. The same sites work fine on Chrome and Firefox.

    I suggest you only begin by taking the measures recommended in this support article.

  • Cannot find how to install iPhoto om macbook IOS 10-7-5. New with apple

    Cannot find how to install iPhoto om macbook IOS 10-7-5.

    New with apple

    Have you bought your Mac of opportunity? A new mac should have with pre-installed iPhoto, if the Mac comes with Mac OS X 10.7.5.

    If the Mac initially had another system installed, look at the system installation discs, which belong to the Mac. On one of these disks should be an installer for iPhoto and other iLife applications.

    If the original system of the Mac is Mac OS X 10.7, there will be no installation disks.

    In this case look at the App Store, the fourth purchases tab, if you see iPhoto with a button I agree. Press this button.

    If iPhoto is not visible on the purchases tab, the previous owner has accepted the pre-installed iPhoto already to the AppleID and may not be transferred to you. You can buy your own copy.  Apple is no longer develops and sells iPhoto. Try buying an installer of iLife 11 on Amazon or eBay.

    iPhoto 11 works most completely, however. The functionality of the site is longer supported on the Mac OS compatible version X 10.7.5, because Apple has only the support of Google Maps.

    If your Mac is compatible, consider upgrading to Mac OS X 10.11. El Capitan and the use of the new Photos.app instead of buy a program that is no longer supported and developed.

    The Photos.app installs automatically, if you upgrade to El Capitan.

  • How to use 802.11n news with WEP2?

    How to put xp family to wep2

    Spin a laptop with a Toshiba International Atheros wireless.  Worked fine with my 802.11 g wireless router, but cannot connect to my 802.11n order new with WEP2.

    Hi JimRhodes,

    Check out the link below to learn more about IEEE 802.11 wireless networks and check if it helps.

    Configuring Windows XP IEEE 802.11 wireless networking for home and small businesses

    http://TechNet.Microsoft.com/en-us/library/bb457016.aspx

  • Noob question: autonomous AIR .bar files?

    Sorry for the noob question, yet to learn these things from the air. When we create a .bar file, it is the only file position, does it include the runtime air, flash, etc, etc, or is it always require an accumulation of air / flash runtimes on the device? THX.

    The .bar file does not include the time of execution because the runtime is already preinstalled on the Playbook.

    Air is really integrated into the PlayBook so you don see the difference between a native app or an Air application.

Maybe you are looking for

  • The documents are repeatedly downloading and opening, how do I stop this?

    I recently downloaded itunes. Since then, Firefox is repeatedly download the documents that I have downloaded previously. This is particularly a problem with two documents that download and then open in OpenOffice. This happens whenever Firefox opens

  • Cannot remove attachments of mail 9.2

    In previous versions, I could remove all the attachments of the emails I was responding too. I would like to respond and then click on 'delete attachments' and all attachments have been deleted. Now on the latest version of Mail 9.2, 'delete attachme

  • Is there a model for MCU PIC12F675?

    I am currently working on a design that integrates the MCU PIC12F675 of Microchip. I want to be able to simulate this circuit in Multisim, however, there is no included model for her. Is it possible to get this simulation model?

  • another disk internal ssd for my computer

    Hello, I have a feel LIKE Phoenix 810qe 230qe Desktop PC, I would get another drive internal ssd for my computer and the clone with usb plug so I can't open up my case, I'll use a Vantec CB-ISATAU2 SATA/IDE to USB 2.0 supports 3.5-inch, 2.5-inch adap

  • Reset Windows 8 PC

    Hey guys, I just got a PC out of my friend so that she no longer uses to which she bought 6 months ago - I need to factory reset the PC that runs on Windows 8, but when doing so, its saying that I need to insert discs, but it does not these is more -