touch screen keyboard symbols does not properly

Similar Questions

• Satellite U920T - duplex cam + touch screen + win button does not work

  I have the problem as the touch screen + frontal camera + camera rear windows on the screen button do not work.

  I tried to install the drivers to display/graphics but that has not helped.

  I bought this laptop from Saudi Arabia and it is still under warranty but I am out of country, so I can't ask the warranty as well.

  someone please fix this and tell me the solution, or tell me what I need to do?

  Help will be really appreciated.
  some details on my laptop:

  Toshiba Satellite U920T-B919.
  Windows 8.1 updated 64-bit.

  Thank you

  Since you mentioned different problems with your laptop, I think that in this case its recommended to get the laptop back to factory settings just to check if all these problems are related to the problem of system.

  Regarding the webcam: Windows 8/8.1 already contains the webcam drivers and therefore additional webcam driver installation isn t possible. Extra webcam driver is not simply.

  From my point of few smells of any description as a bit of a problem of material, the upper part of the slide where the touch screen is part of.
  The key win as well that the two cams are located and there are probably some lose the connection between the two parties (touchscreen and keyboard)

  Anyway, as I said more top, its recommended to recover the laptop to factory settings just to make sure that the system isn t the troublemaker.
  In case of hardware problems, you must get in touch service available in your country.

• Wired Keyboard 500 does not properly

  My new wired keyboard 500 ignores strikes unless I type very slowly.  My old keyboard does the same thing.  Very frustrating.  Is this a Vista problem?

  Hi jdheim,

  This only happens with certain applications? Notepad, Word

  This problem may be caused by a hardware conflict or software, I suggest you try the following steps:

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the mouse and keyboard and then start.

  Now check if the problem is resolved

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: If outdated security software, can cause this problem

  Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once the test is

  Step 3: Change the keyboard and test settings, see the link below for the steps:

  Change keyboard settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-keyboard-settings

  For more information, see the link below

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826

  Let us know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• United States International keyboard option does not properly

  Hello, I have a laptop Toshiba Satellite with Windows Vista Home Premium Service Pack 2.  I had been using the option of United States International keyboard, but it has stopped working.  The keys as the "quote mark and the tilde ~ print twice instead of the combination with the next character."  I tried to reinstall the keyboard option, but I still have the same problem.  I don't know when it started so I can't link to a particular Windows Update but I not made any changes to my hardware or installed new programs.  I use the Avira Anti Vir personal.

  Hi mdmcpapr,

  Please try to remove the windows update and see if this solves the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  and

  Hi Cedric Guyot,

  Regarding your problem from XP:

  Please see the link below for Windows XP forums:

  http://social.answers.Microsoft.com/forums/en-us/xphardware/threads

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Keyboard-zero does not properly.

  When in Excel and I use my keyboard for numbers, I can't use the zero (you need to use the '0' on the top of my keyboard).  All other work of numbers very well but when I type in '0', the format screen comes with 'cut', 'copy', 'paste', 'format', etc.  It's frustrating if you enter a large number of numbers.  Can you help me.?

  It will be a combination, but each model computer is different on those who.  It's usually something like the Fn with F9 or something, but you really need to check with your manual the owner or the company that built to know for sure.

• my hp touch screen desktop computer does not connect to internet

  I'm having a problem with getting my computer wifi hp pavilion all-in-one Office work. It won't let me connect to the internet, but a few days ago it was working fine. I know that I get internet because I use my Tablet right now to write this message, and I use the internet on my ps3 and Xbox 360. I tried to reset the router and disconnect it from the wireless network on my desktop then back to zero, but those who did not. I even uninstalled the updates I had installed because it was the last thing I could do before it's Wi - Fi no longer works, but that didn't work either. Please, someone help me solve this problem. I use Windows 8.1, is a 64-bit operating system, and the product number is H5P61AA.

  Thank you very much. I could solve the problem when I was checking on the news you want. When I was checking to see if I had a firewall on, I came across a page that said I had to go to the control panel. While there, I found a troubleshooting guide for network access. I ran that, and he said: ' the device or resource (www.Microsoft.com) is not configured to accept connections on port "The World Wide Web (HTTP) Service".» "When I saw this, I Googled what it meant, and he leads to a page that gave me the idea to try to reopen the internet. This is when I was careful with the expression "the proxy server is not responding." Then I googled how to fix the proxy server. I followed the steps to open the tools then internet options. From there I went on connections, then LAN settings and I unchecked the box «use a proxy server for your LAN...» "& I ticked the box that follows,"automatically detect settings ". Then it worked! So I guess I could MacGyver it later to your questions.

  Thank you.

• My touch screen blackBerry smartphones does not how to contact the customer for Filipino blackberry service

  help me get the contact number of the customer service of blackberry in the philippines

  Do a battery pull should fix your problem and prevent you having to make a phone call.  Just remove the battery while your phone is on and replace it a few seconds later.

  Let us know if that helps you.

• Help: New pencil will work on screen for touch/scroll, but it does not write, draw or scribble...

  Help: New pencil will work on screen for touch/scroll, but it does not write, draw or scribble...

  While you do not, you use the iPad Pro, correct?

• Sync symbol does not appear in the tab header

  In the version of Android, Firefox, I configured my e-mail address of synchronization, but the sync symbol does not appear where it should (except the symbol of private browsing). The desktop version of Firefox is properly set up with my account, so I have no idea what I can do now to make it work? Thank you.

  Hi snoreau, the tabs sync on android have moved into their own group of experts on the home screen (also known as awesomescreen).

• Scrolling the page does not properly respond to BlackBerry Curve9360

  Hello friend

  I have developed applications for BlackBerry (JqueryMobile, Phonegap) the application works fine in BlackBerry Torch 9800.

  But once I've installed in BlackBerry Curve9360, scrolling of the page does not properly, that I am not able to view the complete list of items and long text.

  Help, please

  I came up with the solution, the problem occurs because BlackBerry Curve 9360 isn't a touchscreen, there fore scroll doesn't work.

  In my applications, I add 2 pages "index.html."

  on the first page, you have to test if the device is not touch and redirect to the second page.

  Do not use the page for "BB Curve" scroll and any other animation like CSS "" - webkit - transform: translate3d "»

  The other js script go without a problem.

  The page "BB Curve" to redesign the html for use with the cursor,
  For example, the menu is smaller, the police is smaller.
  the size of the screen is fixed.
  Dimension height is better indicate a value min eg 300px
  etc...

• Graphic drive does not properly.

  Graphics driver does not properly.  Screen will Dim and must restart to resume use.  Occurring more frequently now.  Y at - it a fix for this problem?

  Problem does not occur in safe mode.  Failure seems to occur on any key or the video style.

  Any material support is the manufacturer of the hardware regardless of the operating system that you choose to use.  As it is unlikely that you have a Microsoft video/graphics card - one you have and have you downloaded and installed the latest drivers/software they provide for your particular device?

• The screen brightness setting does not appear in the mobility Center

  original title: how is the screen brightness control does not appear in the center of mobility?

  In the past the mobility of my laptop Vistas Center contained a slider to set the brightness of the screen.  My computer screen is dark and I want to adapt it to a brighter screen.  How can I get my rear screen brightness adjustment?

  Hi bigwaterboy,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest updating the graphics card driver on the computer and check if it helps:

  Updated a hardware driver that is not working properly

  Reference link:

  Using Windows Mobility Center

  I hope this helps.

• Safari Web Clip does not properly

  Hello everyone

  I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

  

  

  Is this some sort of bug or can I fix it myself?

  Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

  Dashboard widgets in general, are an old technology that has not been updated in many years.

• Keyboard MacBook does not synchronize with external keyboard

  I have an external USB (Logitech K520) keyboard and is not sync with the MacBook keyboard.

  What I mean with "sync": for example, when I press shift on the MacBook, and 'a' on the external keyboard he wrote 'a' instead of 'A '.

  Another example: I press cmd on the MacBook and the 'c' on the external keyboard, it does not copy the selection

  It worked on my old ThinkPad. I can work on a Mac as well?

  The solution is here: rd-to-accept-modifier-key-input-from-macbooks-i http://apple.stackexchange.com/questions/131287/how-to-get-external-apple-keyboa

• Touch I D is does not work (but it worked until 3 days ago)... iOS 8 bug...? Solution available?

  Touch I D is does not work (but it worked until 3 days ago)... iOS 8 bug...? Solution available?

  Try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (15 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  BTW, say you iOS 8, but your footer says iOS 9.3.1