Touchpad and mouse does not scroll on AOL or Fox News site

Similar Questions

• Aspire M5 - 851t: touchpad and mouse does not.

  OS = Windows 7 Home.  I have MS Office 2010 on my Aspire.  But, I need to install Office 2007 / Access 2007 to test compatibility.  But, once I installed Office 2007 USB mouse and touchpad has stopped working.  I tried a system restore, but the recovery failed for some reason any.

  I uninstalled all MS Office products, but I still have the same problem.

  I installed the latest dirvers of mouse and touchpad Acer, but not joy.  It is interesting to note that I can remote access to the Aspire and the remote mouse and touchpad work very well.

  I also tried a repair of Windows 7, but it does not have the normal repair process.  It ask if I want to repair, and then it opens a raw DOS application that will only make a restore or a difficulty of startup.

  I checked the Windows logs and alert and didn't see that everything about this issue.

  Thank you.  Any suggestions will be appreciated.

  I'm sorry.  User error.  I didn't know that the Fn - F7 would be to turn the touchpad on or off.  And it seems that I have a defective USB mouse.  Activating/Deactivating the F7 and permutation of mouse seem to have solved the problem.

  Consider this closed announcement.  Best regards.

• Qosmio X 300 - touchpad and mouse do not work

  After that I was recently reinstall antivirus, something was wrong here and at some point cursor stopped on the screen without moving. Touchpad or mouse worked. I tried to restart the laptop several times... but the result was the same - keyboard worked, but the touchpad and mouse not. Although I'm not an expert in using only the keyboard I managed to open the control panel-> devices (where I can see the marks of attention in front of pointing device (I guess that its touchpad) and mouse.)

  The problem is that the keyboard works I don't know how pointer on them to restart drivers for them or something like that. The problem may seem stupid, but I really beg for help or advice because I am currently overseas and can not bring my laptop to any service.

  Hello

  I recommend the touchpad power feature.
  You can enable and disable the touchpad by pressing FN + F9

  Does the touchpad?

  It would also be possible that your system is confused until so you can try to put the OS up to this early time.

  Click on start-> all programs-> Accessories-> system-> system restore tools

  Then you should be able to restore the operating system

• touchpaded works but does not scroll to the bottom of the page

  all my scroll pad will do is move the mouse pointer. the section wavy on the side is no longer scroll the page. I noticed after I went to msconfig and off startup programs. next time, I received my mobile scrolling did not work. I tried to turn it back on all programs and restart, but it does not work. I have also redownloaded the driver and that no longer works

  It's a hp pavilion dv4405nr

  OK, if went to the start menu and makes the recovery of the pc and it works now. Thank you all

• X 220 Touchpad and Trackpoint does not

  Hello

  My 220 x 4290's touchpad, trackpoint and buttons on the keypad touchscreen and buttons trackpoint refuse to work. I'll have to use a USB mouse for now. I tried to update the synaptics driver for the last, which unfortunately did not help.

  At the present time, the system runs Windows 10 (since the last months) with the latest version of the BIOS installed. The touchpad and the trackpoint don't even appear in the Device Manager where they used to show.

  I opened the system to check if the Ribbon for the keyboard and the touchpad cable were both sitting correctly. Reinstalling did not help.

  This spell the end of my x 220? Is it possible to fix this?

  Thank you very much

  Said

  Okay, I think that I managed to solve this problem. In the BIOS, I have selected "load setup defaults". When I started in windows the ultranav and paved touch both started working again. Thanks for the help anyway, it is much appreciated.

  Said

• Keys inductive Y510-Touchpad and touch does not

  Hello world

  I am at a loss with my situation. Keyboard of my laptop Lenovo Y510, inductive keys/multi-media keys to touching, the volume and multi-media-Equalizer spend everything stopped working. I'm able to use a keyboard and an external USB mouse, and as of about an hour there was the keyboard works again. The inductive keys have power and the light up when pressed but do nothing.

  I've uninstalled and reinstalled the drivers for the touchpad. I know not what pilot control keys inductive so have not tried this option. I've heard say that installing SP1 (I'm running Vista 32 bit) can solve this problem, but have not tried. I have also heard that after use the cables that connect the mouse and the keyboard to the motherboard may squirm let go, but I don't know how to get it and check.

  I passed my warranty and would like to resolve this problem. I have built desktop computers and made repairs, but laptops are a new area for me. Need all the help I can get.

  More software Lenovo Energy Management usually controls these keys. Install it and you should be good to go!

• Touchpad and accupoint does not not on Tecra S1

  Hello

  After you install an external mouse from Logitech (initially connected through the PS/2 port, later via USB) the touchpad and accupoint simply refuse to work. I tried with Fn + F9 to turn on / turn off, but no result.

  Working both on W2K3 and WXPP (laptop a multiboot configuration) where the situation is the same. Hope this provides enough information to everyone, the drivers are up to date. It starts to look like a hardware problem, but if anyone has had the same problem and solved in the configuration of the software, please let me know.

  Thank you

  Hello

  It's very strange. I also have home wireless keyboard and mouse from Logitech and it works perfectly. Usually with Logitech keyboard or mouse must be delivered the driver CD. Have you installed it? If you delete it, can you use portable keyboard correctly?

  Try to come inside the BIOS and check please if you can find the settings for the pointing device. There are a few options. You can change it with the space bar. I don't know, but there must be option called simultaneous or something like that.

  In this case, you can use the internal and external mouse at the same time.

• Magic mouse does not scroll up and down in the Pages?

  Hi my Mouse 1 Magic suddenly stopped scrolling up and down in the Pages, BUT: it scrolls by always going up and down in Safari and some other programs I've tried like overview and reminders.

  If you are using El Capitan I believe that there is an update of Pages since last October.   Have you downloaded.

  In my view, the current version number with the El Cap is 5.6.   Failure to have done might be the problem.

• Computer laptop keyboard and mouse does not work (updated Bios and took the batttery)

  I have HP G60-530US.
  
  I read all the posts that talked about updating the BIOS and then by doing a hard reset by removing the power cable and speaking on the battery and then hit the power button for a minute or simply to leave the computer for several minutes.
  
  A lot of people seems to have solved their problems.  Not me.
  
  I updated the BIOS and also did the hard reset like 10 times.  What other options are there?
  
  I have Windows 7-64 bit.  This problem occurred after I did the updates windows 11/04/13 or 12/04/13.
  
  Mouse power switch and the power button wifi button keys are the only ones that seem to work.

  Hello

  Go back to the device, right click on the Device Manager and select uninstall - when it is finished, restart the laptop.

  Any change?

  Kind regards

  DP - K

• Keyboard and mouse does not work / computer does not start

  I have a HP Pavilion a6403w that my daughter uses to the school. One day, the computer stopped boot-up.

  I get to the blue screen to choose (F10 = Setup) ect... The only key that seems to work at all is the F-10. If I press it, the computer responds by indicating it's to enter the configuration mode (but only if I press it very shortly after you turn on the machine), but the computer is hang.

  I can't get into safe mode.

  I put the recovery disk and turn on the machine, but nothing.

  I'm at a loss... any help would be great!

  Thank you.

  Stick with the HARD drive. Ask them to send it to you.

• Firefox and Palemoon does not save the settings of a Web site.

  He is a recent problem. I use Firefox 25.0.1 because progress of download in Firefox 26 changes are unacceptable.

  I use www.nzbindex.nl a lot - Out of the blue Firefox will not save the settings, but will Google Chrome. In my view, that the problem is a Java problem. Any advice would be appreciated.

  This can be caused by corrupted cookies or cookies are blocked (check the permissions on the subject: permissions page).

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click on "Site Identity" (globe/lock) in the address bar
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  It is not advisable to continue to use older versions of Firefox with disclosed security vulnerabilities.

  • http://www.Mozilla.org/security/known-vulnerabilities/Firefox.html

• My flash player has been updated and still does not recognize that its been updated

  My flash player has been updated and still does not recognize that its been updated on sites like facebook. I restarted my computer several times, tried to reinstall the latest version of flash player, active manage add ons and clicked active x (all windows instructions). But while that in facebook, I can't download the images as I used to on my old laptop, its me to download 1 by 1, because it says that I don't have the latest version of flash player, BUT I DON'T!

  Flash Player in Windows 8 is embedded you do not download it and all updates are are through Windows Update. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it employees, or any other Member of this forum.

  "When you try to pick out anything by itself, we find it hitched to everything else in the universe."-John Muir

• Satellite L300 - Vista - Touchpad and USB mouse does not.

  Hello

  Well well after hours of trying allsorts, I post here...

  Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.

  On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
  The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.

  Right... I have...
  Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
  uninstalled the software synaptics via the program Panel.
  Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
  Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
  Still, the USB mouse does not either.

  Someone enlighten me please on a fix for this...

  Hello

  Really strange what s my friend because normally a touchpad driver update should solve the problem.

  In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.

  Good bye

• MS point 5000 laser wireless mouse does not work, but scrolling and magnifying glass works

  My point of 5000 MS wireless laser mouse does not work, but work wheel Magnifier button and scroll.  What could cause this problem?  I there something wrong with the mouse or something should be cleaned?  This is the first question I had after 3 years of use.

  I have not any hardware or software changes, and the problem is constant, not specific to any application.

  I restored my system to my latest backup when the mouse was working, but it has not solved the problem.  The software update has not solved the problem.

  I installed a different mouse, which works very well. The wireless mouse does not work on another system, I assume that it's broken and I will replace it.

  Thanks for your suggestions.

• TouchPad does not scroll with Win 7 on Satellite A200 PSAE3E

  Hello

  I have a little problem with the touchpad after update my OS for Win7 (x 86 32-bit).
  Scrolling with the latest drivers for Win7 from Toshiba and Synaptics does not work well.

  14.0.3.0 driver version (2009-08-27) Toshiba A200 PSAE3E

  Does anyone have a solution?

  Best regards

  Hello

  > scroll with the latest drivers for Win7 from Toshiba and Synaptics does not work well.
  Is this means that the scroll function is available after the installation of Win 7?

  UM, to me, looks like you need configure the touchpad function.
  You can do this in Control Panel-> mouse-> device settings
  There should be an additional tab containing the options of touchpad

  Here, you could change and increase the contact surface is needed for scrolling and similar you could increase the sensitivity too

  Welcome them