Touchpad/cursor does not

Similar Questions

• Touchpad on my HP Mini 110-1125NR is locked and the cursor does not move

  I've never locked my computer.  Everything has been implemented in the store where it was purchased about 4 years ago.  I put my computer in sleep mode yesterday afternoon and just tried to use this evening... somehow, the touchpad is inadmissible and the cursor does not move.  He remains in the middle condition of the screen.  I turned off the computer and restarted, nothing done.  Can anyone provide a solution?

  Hello

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  If the pointer is still frozen, try double clicking the top left of the button.

  Kind regards

  DP - K

• Cursor does not when the computer starts.

  On my wife laptop when she started his computer cursor does not at all. How she can use the cursor without using the touchpad (because it doesn't seem to work at all)? So how do this slider to work again?

  Thank you for your help.

  Paul

  Hello

  Try the system restore before you did it again at:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ================================================

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  The here for Toshiba only if other brands may have similar:

  If a Toshiba, they have keys that allow easy adjustment of the TouchPad. See Toshiba support and
  Forums. If the TouchPad has been disabled with map keys must be activated with them.

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba forums
  http://laptopforums.Toshiba.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Cursor does not work using an external mouse

  Internal cursor does not currently work with an external mouse

  Yes, I use a laptop.  How can I disable the touchpad?

  The procedure for doing this is different for every brand and model of laptop.  You will need to read the user guide to find out how to do it on your computer.  I promise you that it will not give you leprosy for this!  :-)

  One possibility would be via the mouse control panel applet.  Click Start-> Control Panel-> mouse.  Click the device settings tab, and you should see a button to turn off the touchpad.  Make sure that you are disabling the touchpad and not by the mouse.  However, the procedure of your user guide will be easier and more user-friendly.

  Good luck.

• My cursor does not work in Blogger using the Safari browser.

  My cursor does not work in Blogger using the Safari browser. I am able to type, but the cursor seems to disappear when I'm in blogger.  It is difficult to navigate if you do not see where is the curse. I used all the other browsers, and this does not happen with them.  In the Blogger help forum other people experiencing the same thing.  He has been as well as a few weeks and I can not say definitively if it coincides with the updates to the OS. Any help would be appreciated.

  I have the same question too! Is there any ideas on how to solve this problem? So frustrating when you can't even say where you are on the page

• The mouse cursor does not appear on the center of the screen to start upward.

  The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

  The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

  Suggestions:

  Go to Safe Mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. Use the up/down arrow and selectSafe Mode with command prompt.

  1. in safe mode, please do a system restore. Choose the date where you did not have this problem as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  2. always in safe mode, do a check of the file system. See if file check will check for corrupted files and repair them.

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• When typing password, cursor does not move & nothing is displayed also cannot get to any other control panel or in the region

  Original title: password

  I have Win7

  I know that my password

  My computer starts up & goes to the screen where I put in password.

  I type password but the cursor does not move and nothing is displayed.

  I can't go to any other control panel or in the region

  Help, please

  try taking your laptop battery, if it is a desktop computer, unplug it, for some reason, it worked for me

• Microsoft Bluetooth Notebook 5000 - I can click but the cursor does not move

  Greetings,

  I have a Bluetooth Notebook 5000 mouse that has a weird problem. It is well connected to my computer bluetooth, and I have all the updated drivers. Since last week, when I move the mouse, the cursor does not move (on the screen), but when I click on (either on the middle left, right, even scroll to the top and bottom), it works.

  My guess is that the laser under the mouse thing is probably broken. I tried different surfaces to see if I got any kind of reaction, but none works.

  Now the other problem is that the PID (as well as other numbers) number under the mouse is partially illegible due to wear. I can't see the last part of the PID.

  Anyone got any ideas? And is there a way that it could be replaced under warranty, even with an incomplete PID?

  Best regards

  Philippe

  Hello Philippe,

  Thanks again for the update.

  It is possible that there is a hardware problem.

  I suggest you to contact Microsoft hardware support.
  Reference:
  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  Thank you

• I want to slow down the pace. When I move the cursor at the end of the tween, to drag the end of the Tween to the right to lengthen the interpolations, the cursor does not change to a double-headed arrow, as it should to.

  Hello.

  I want to slow down the pace in an animation frame-to-frame hand drawn at 24 frames per second. When I move the cursor at the end of the Tween (24 images), in order to drag the end of the Tween to the right to lengthen the interpolations, the cursor does not a double arrow as it should, but changes to a black arrow with a small white rectangle with a border dotted, to the lower right of the cursor. Therefore, I can't extend the interpolations. Can anyone say about this?

  I am on the 20th day of a trial of Adobe Flash Professional CC, on an iMac osx 10.11.2 El Capitan. I use a Wacom pen.

  Thanks for any help. (I'm a complete newbie to the animation)

  Thanks for this very useful information and thanks to other members of the forum who also gave me great advice.

  I will experience more away, using the excellent information, I have now.

  Thank you all.

• My touchpad lock does not work, even if the orange light is on, indicating locked buffer. Probook4420s.

  My touchpad lock does not work, even if the orange light is on, indicating locked buffer. Probook4420s.  Windows 7 32 bit.

  Hello

  If the amber light is on the TouchPad itself, try double tapping

  If that is not activate, try uninstalling the device driver course Synaptics pointing, then restart the computer and download and install the driver from the link below.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145435&prodNameId=4145436&swEnvOID=4052&swLang=13&mode=2&taskId=135&swItem=ob-86824-1

  Kind regards

  DP - K

• Cursor does not focus on the newly created line.

  I use JDeveloper 11.1.1.4. Whenever I create a new line in the table of the adf, the cursor does not focus on new line. He always focuses on the last line that clicked before adding the new line.

  see that this can give some ideas

  Information about ADF: creating a new line and create update auto focus

• Prblem with buttons; Cursor does not turn in the pointer (finger) into the mouseover state

  I'm programming the buttons on board animate, which are just symbols with their own timeline. I gave them actions to clicks, mouseover and mouseout/mouseouthandler(). They just call URL and are working properly, but I noticed that the cursor does not turn in the pointer (the hand with the index pointig) in the mouseover state. This creates a strange feeling, because users are not sure they are before buttons they click on them...

  Is there any solution for this?

  Thanks in advance!

  Hi Gzapiram,

  Click your button and in the properties panel, you will find a slider, with the auto default value section. Simply select the familiar hand cursor

  Gil

  

• Cursor does not change when you move the link to context menu

  I created a text for a context menu link. The link works, but the cursor does not change from a pointed finger, the standard link icon.

  I don't know much JavaScript, but can understand it if it's just adding the code. This has been done in CS3. Any help would be appreciated! Here is the code:

  function MM_openBrWindow (theURL, winName, features) {//v2.0
  Window.Open (Theurl, winName, Features);
  }

  Thanks in advance.

  Todd

  A link would be nice, but I suspect you aren't gettign the finger (you know what I mean) when you hover over the link as your href is not defined on anything whatsoever.

  
  Set your href on ' # ' or ' javascript:; -the latter is preferred.
  		   

• Cursor does not see the increase if the starting mode Tablet - Thinkpad Yoga

  I noticed that if I boot my TPY in tablet mode, the cursor simply does not appear even if I flip the laptop mode. I can only solve it by restarting and booting from laptop mode.

  If I boot from the portable mode however, and return to the Tablet mode, the cursor appears again when I flip it back in laptop mode.

  Anyone else suffering from this problem too?

  I solved this problem after you have reinstalled the time pilot 3rd. Not too well why the problem disappeared

  However, a new problem is surface (a less serious). the mouse driver seems to be loaded rather late in the boot sequence, so after seeing my office, the cursor appears only after 5-10 seconds. If I turn off the touchpad in Device Manager, the cursor appears immediately at startup (without appropriate drivers loaded). guess it's a bug.

• Touchpad tapping does not

  Synaptic Lux pad V7.4 on PS/2 Port. Cursor works but listen and L.H click does not work. Everything works ok with an external USB mouse. Program of re-installed driver for above but same problem.  Restore points considered minor at the earliest without a solution

  Window 7 Home premium 64 on HP G62 please, need help

  To follow the numbers I gave: a program called "Belarc Advisor" pulled all sorts of information including the number, I showed. Unfortunately he has eliminated the Serial # as thereafter. Do not understand why, but see for yourself

  {Deleted private information}

  To finalize this issue, play and do ctrl key combinations and all the cursor keys, one on the r.h.side/bottom of the keyboard - fn and all the window and all keys - alt keys cursor, all cursor - cursor keys my touchpad worked! Ther must be a shortcut in these key combinations that off - who knew.

  Thanks for all your interest and efforts to find a solution