Cursor does not work using an external mouse

Similar Questions

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• My cursor does not work in Blogger using the Safari browser.

  My cursor does not work in Blogger using the Safari browser. I am able to type, but the cursor seems to disappear when I'm in blogger.  It is difficult to navigate if you do not see where is the curse. I used all the other browsers, and this does not happen with them.  In the Blogger help forum other people experiencing the same thing.  He has been as well as a few weeks and I can not say definitively if it coincides with the updates to the OS. Any help would be appreciated.

  I have the same question too! Is there any ideas on how to solve this problem? So frustrating when you can't even say where you are on the page

• My touchpad does not work and the usb mouse works

  After connecting with a USB key, my touchpad does not work and the USB mouse works

  Hi, Dieudonné,

  Make and model of computer?

  Have you tried to uninstall the drivers for the touchpad.  Update?

• Touchpad HP Pavilion 17 works does not after using an external wireless mouse

  I have the HP Pavilion 17 laptop.  It is running Windows 8.1.  Everything worked fine until I used an external wireless mouse.  After unplugging the mouse the touchpad does not itself again.  I have therefore no pointer and no touchpad to use unless I have keep the external mouse not connected.  I tried the hard reset with the plug of the battery, unplugging, pressing the power button for 15 seconds and turning everything back on.  Still no work touchpad.  Had this happen last week and called HP because I only had the laptop for 3 days at this time here.  They had me do a system restore to an earlier point.  At this point, everything worked again and I toilet problem has been resolved.  This is why I used the external mouse always thinking that it wouldn't be a problem.  I was wrong.

  Also, I've seen other posts on a different notebook that has a toggle power button in the upper left corner of the touchpad to activate/disengage, but this was not one of these.

  Any help would be greatly appreciated.  My next step is to call HP again tomorrow and see if someone else has another solution.  I would obviously like the ability to use the touch pad or external mouse at any time without having to restart and go through all these other problems.  Otherwise, this phone pretty may be going back to the store this weekend.  :-)

  Thank you!!

  This fixed the problem! Thank you very much!! Seriously, 3 different phone calls to HP and not one of them ever talked about this easy solution!

• ASDM does not work in the external interface

  Hello

  I'm new to ASA. I have ASA 5510 and strives to enable ASDM access through the external interface. but is not working for me... not. I set up a public ip address on the external interface and activated the ssh and asdm. SSH works but asdm does not work. This is a test environment, so I have not yet set up an ACL.

  VPN-TEST # show version

  Cisco Adaptive Security Appliance Version 8.2 software (1)

  Version 6.2 Device Manager (1)

  Updated Wednesday, 5 May 09 22:45 by manufacturers

  System image file is "disk0: / asa821 - k8.bin.

  The configuration file to the startup was "startup-config '.

  VPN TEST up to 4 hours and 33 minutes

  Material: ASA5510, 1024 MB RAM, Pentium 4 Celeron 1600 MHz processor

  Internal ATA Compact Flash, 256 MB

  BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)

  Start firmware: CN1000-MC-BOOT - 2.00

  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03

  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.04

  0: Ext: Ethernet0/0: the address is d0d0.fd1d.8758, irq 9

  1: Ext: Ethernet0/1: the address is d0d0.fd1d.8759, irq 9

  2: Ext: Ethernet0/2: the address is d0d0.fd1d.875a, irq 9

  3: Ext: Ethernet0/3: the address is d0d0.fd1d.875b, irq 9

  4: Ext: Management0/0: the address is d0d0.fd1d.8757, irq 11

  5: Int: not used: irq 11

  6: Int: not used: irq 5

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 50

  Internal hosts: unlimited

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 0

  GTP/GPRS: disabled

  SSL VPN peers: 2

  The VPN peers total: 250

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes a basic license.

  VPN-TEST # http see race

  Enable http server

  http 0.0.0.0 0.0.0.0 outdoors

  VPN-TEST # display running asdm

  ASDM image disk0: / asdm - 621.bin

  enable ASDM history

  Could someone please help me know what Miss me?

  Kind regards

  Praveen

  That's it, please add any combination of encryption by using the command "ssl encryption" algorithms, please add them in one line next to each other, and you can use '? ' to check available combinations.

  Kind regards

  Mohammad

• Qosmio G30-155: video Capture does not work using s-video in port

  Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
  Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

  In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

  It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

  Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

  Can you please explain what you want to do exactly?

  Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

  To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

• Equium A200-1VO - touchpad does not but the fact external mouse

  I had a problem with my hard drive does not it just happened overnight so I replaced the hard drive no problem and rebooted the system.
  Everything is ok but the touchpad does not work.
  I tried FN + F9 it's ok, I have updated the touchpad program still does not.

  Help, please!

  XP or Vista?

  Did you use a Toshiba Recovery disk to install Windows? Or a generic version of the street of Windows?

  Maybe you should go to the Toshiba website and download the drivers.

• Select CTRL or copy, does not work - using the new Windows 7-

  Using the new Windows 7, it still does not work:

  > To select the non-consecutive files or folders, press in and hold the Ctrl key and then click each item you want to select.

  There is also the same problem when you use the Ctrl key to 'Copy', rather than 'move '.

  Sometimes a reboot will fix it, but other times not. Is it an appropriate solution for the Ctrl key work properly?

  Hello

  It is difficult to imagine a particular key for only certain combinations of keys does not?

  Here are a few troubleshooting steps that you can try to isolate if all goes well the problem.

  1. start the computer Safe Mode and try to reproduce the problem. Start your computer in Safe Mode

  2. perform a clean boot, and then follow the instructions in the following article to help identify the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  3. create a new user account, log in to the new account and test the issue. Create a user account

  If this step resolves the issue, is that your user account may be damaged. Replace

  your original user account.  How to fix a corrupted user profile.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• The cursor does not work correctly, difficult to control! Help, please!

  Cursor is not working correctly, difficult to control!

  Help, please!

  Thank you!

  Hello Rudolf Jr,.

  If it's on a laptop, then it might be the sensitivity of the touchpad. Depending on the manufacturer of your computer, you can download a driver for the touchpad which may help. Or go to control panel, mouse-click and change the sensitivity of the touchpad settings.

  If it is a Synaptic touchpad, you can download the driver from the following location:
  www.Synaptics.com/resources/drivers

  Let us know if that helps.

  Marilyn

• Three history of finger cursor does not work

  I use an Air of IPad.  The history of 3-finger gesture does not work.  Someone at - it solution.  Gestures of multitasking is disabled.  I've tried everything.

  Understand how to operate, do not keep the fingers closed together but apart.  Works now.  Thank you, Steve

  Sent from my iPad

• Popup JavaScript does not work using global variables?

  I have a menu region "References" which contains links to several pages pop up indicating the access codes of valid data filtered for the location of the user. I tried to make this work in another page by changing the references page to global variables variables / application, but it does not work. Can anyone suggest a work around? Here is the code I use:
  
  Target URL in link

  javascript:callEmpPopup('P1050_ORG_ID')

  JavaScript

    function callMyPopup (formItem1,formRow1) {
      var formVal1 = document.getElementById(formItem1).value;
      var formVal2 = 1;
      var url;
    url = 'f?p=&APP_ID.:1056:&APP_SESSION.::::P1056_FACTORY_ID,P1056_ROW:' + formVal1 + ',' + formVal2;
    w = open(url,"winLov","Scrollbars=1,resizable=1,width=1000,height=600");
    if (w.opener == null)
    w.opener = self;
    w.focus();
    }

  Blair:

  Use a "Hidden" type page element defined on page 0 instead of a part of the application.

  CITY

• FIFA11 does not work using the ATI GPU on Satellite S70 - B

  I have a portable Satellite S70 - B. with amd fifa 11 video card does not work, but with the video card intel it works.
  Why?

  Despite the solution/solution posted by above user, an update of the graphics card driver could also be an option for you to my knowledge, that a lot of games does not start because of the incompatibility between the game and the graphics card driver

• Satellite M70 does not work properly with external monitors

  Hello

  My Satellite M70 has problems with a couple of monitors and projectors.

  When I connect to another manufacturer (model AL1721) monitor, the screen remains black, if I connect to another monitor manufacturers (model AL1716) everything works fine.
  If I connect a projector there also is a black screen.

  At first everything worked fine, I had a monitor AL1721 who worked, and 1 day it no longer works. I reinstalled windows, updated video card drivers, but it still does not work.
  anyone an idea why?

  Hello

  How do you connect the monitors and the projector? with an analog or a digital (with adapter) cable to the screen?

  Another question: when you connect your AL1721/Beamer and turn on the machine, you can see the Toshiba logo or something else. Is the error just that occur in windows or the "DOS" screen, too?

  BTW. have you reinstalled with recovery or separated from an original disc of Microsoft windows and the drivers you have installed?

  Questions about the question that could be answered by your help me to help you. ;)

  Welcome them

• Rebel T5 does not work using the live view. Live view mode is enabled, but images are not captured.

  Rebel T5 is not capturing images when taking pictures in mode live view.  Live view mode is activated but update automatic and image capture does not work.  Any suggestions?

  troyantonik,

  What lens do you have and have you tried other lenses with your camera to see if they also not auto focus when you press the shutter button halfway?

  Just in case a parameter can be the cause, I recommend you to reset the unit to default settings.  Follow these steps:

  1. Press the MENU key.
  2. [#3 tools] tab.
  3. Select [clear settings].
  4. Select [delete all device settings].
  5. Click [OK].
  6. Select [clear all custom Func.].
  7. Click [OK].
  8. Exit the menu.

  If it is a time sensitive matter, additional support options are available to contact us.