Touchpad does not work after update BIOS 1.08

Similar Questions

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• T410 CTRL key does not work after update BIOS to 1.45 (German keyboard)

  Dear community,

  I updated the BIOS of my TP T410 (2522), German keyboard, to 1.45. After the update, both CTRL keys don't work anymore. Ditto for the AltGr key. When I switch to CTRL FN in the FN key BIOS - as supposed - works like the CTRL key. But when I turn off again the FN returns to his good funtion and CTRL does not work.

  When I connect an external keyboard via USB it works perfectly.

  Any suggestions how get the CTRL key works again?

  Best regards, Simon

  Hello

  turns out be a hardware fault. Swapped keyboard and it works again.

• Touchpad does not work after update Win8.1

  I've just updated to win 8 to 8.1 and since then my touchpad not working any ideas

  Hey thanks for the comments.
  The key is that your touchpad working again.

• Satellite S50-B-15F - Touchpad does not work after update of Windows 10

  Hello

  Yesterday, that I've updated my S50 B 15F Satellite with Windows 10. Now the Touchpad no longer works. Tried enabling in the settings. This works except for the left and right buttons. I reinstall the software momentum but no change. Any ideas how to solve this problem?

  Thank you!

  Joram

  Here another thread where the issue could be resolved:
  https://Forum.Toshiba.EU/showthread...-to-Windows-10

• Right shift key does not work after update BIOS on the Satellite A200 - 28 p

  For some reason, after I updated my Bios, my right shift key doesn't work and no not my FOUR and SIX button, so why I write in words: (,

  I tried to reinstall windows, t hasn't made a difference.
  I tried to roll back the drivers for the keyboard, as well as the move towards the US version of the keyboard, nothing has helped.

  Thank you

  Hello

  What cell phone do you have exactly? And did you use the correct version of the BIOS?
  Have you tried to set the BIOS to default settings?

• Multitouch 511 Acer e5 does not work after update bio

  I've decided to update my BIOS on my laptop Acer E5 511 and afer that my touchpad lost the abilitiy to work on mutlitouch gestures.

  I can't scroll, zoom, or do the right-click by pressing with two fingers at the same time.

  I tried isntaling the touchpad on the official drivers, restarted my laptop a few times but nothing helped.

  If someone had the same problem and found the solution please share, I got to use for functions multitouch now I feel diseabled whenever I use the touchpad just for the cousor Thierry.

  Found the soltion targeting minutes after this announcement.

  You must go to your BIOS or UEFI py parameters pressing and holding you key F2 while the laptop is turned on.

  Here you find touchpad and select 'Advanced Mode', then simply save the changes, and after restarting the laptop the multitouch features will return.

• Compaq Presario V3118AU Internet does not work after update BIOS and Broadcom Wireless Driver!

  I posted here yesterday on my computer because I have updated the Bios program with the update of the BIOS of 2007 and after that my internet no longer works.   The advice I've gotten is update Broadcom driver wireless as well as I did yesterday but the same result.    I was told also that if all things go wrong can I downgarde my Bios program that imposible because the older version on my computer model page is actually installed now on my computer.  I have run out of idea already of what else could be done please help.    Sometimes wireless connection to connect to the router but often difficult and if I am connected I can't go to the internet and to connect to the Local network I just get limited connectivity.

  Can someone please tell me what to do to solve this problem.

  Thank you very much!

  You are welcome. Let us know how it goes.

• Audio Jack does not work after update bios

  I'm not able to use my my helmet after I've updated my BIOS and driver audio audio codec IDT high definition.

  I have a probook 4440 with windows 7 (64 bit) OS. Help about my problem?

  Hello:

  The only suggestion I can offer is to perform a hard reset of the laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=376999&prodTypeId=321957&prodSeriesId=376999&ObjectID=c01684768

  Paul

• Satellite S50D-B - TouchPad does not work after update of Windows 10

  Hello

  Just bought a S50D-B Satellite last week. Comfortable with technology. Updated to Windows 10 (3rd I did on the machine). New laptop is the only one to give problems. Tried allowing in settings - seems to be gaining 10 Auto turns off the device, which is strange. Indeed, it works (somewhat) with the exception of the buttons left and right. Tried to reinstall software momentum but no change. Any ideas?

  Thanks in advance,

  Peter
  There may be only a Highlander (1timothy 2:5)

  The issue has been resolved as you can read above:
  the ELAN touchpad driver update is released and it seems as well as other updates for Windows 10.

  But of course, MOMENTUM software/driver must be installed in the case to receive this update!

• Scrolling on the touchpad does not work after update. All advice?

  Hello I have a problem with my touchpad. After upgrade yesterday I can't scroll with it and I can not change the resolution. All advice?

  I have win8

  OK found:

  SVP1321L1EBI

• Satellite C50D-A-12 x - touchpad does not work after Windows Update

  the touchpad does not work after the windows updare

  I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
  https://Forum.Toshiba.EU/showthread.php?82878

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740