Touchpad for laptop VGN320E driver

I have laptop VGN320E. I disabled the touchpad when I used it. I reloaded it with WIN 7 Ultimate. But I don't re - not allow the touch pad before that. I can't seem to find the right driver to get the touchpad working again. I installed the synaptics pointer control and thought that the touchpad driver. Is there any other driver I need to install to get it working again? I'm sure that something will do, but I can't seem to find the answer. Any help would be greatly appreciated. Thank you!!

Rockstar9280,

Please check the VAIO Control Center and then turn on touchpad device located inside the mouse.

1) click Start
2) click on all programs
3) click on the VAIO Control Center

Thank you for your response. I tried to uninstall the driver and then start it again twice. Did not work. I don't know what else I could try. I tried the update of the driver later, and he said that the driver has been updated. It almost seems that the changes I made before is never reset. When I disabled it all first I went to Program files > Sony > Settings Utility Services > device VCCPointing > disable. Since I rebooted the computer, this option is no longer there. So is there a way to get this back? As a utility driver Sony, or something. Thank you.

Scott

Tags: Sony Computers

Similar Questions

  • Is there any robust recovery for TouchPad for laptop Qosmio?

    I've only had this laptop the touchpad and already 3 week has focused and developed a patch of bright in the Center.

    I think that, all in all, the actual time used on this machine does not exceed 30hours; This may not at first seem be a major problem, unfortunately for me, it's...

    I am a professional photographer and the need to use this laptop on the road to upload images, I just took to display to clients, because of its delicacy, the touchpad area became super sensitive and even if I've adjusted is setting a milli second I let my finger on the pad controls causes I don't want.

    I know and understand that the touchpad is part of the molding fascia which can not be changed, even if it could it would surly wear once again, I am just jump you guys can point me to some sort of overlay more robust I can adapt.

    Hello

    There are a few different laptop Qosmio. Older have on touchpad very smooth surfaces. Qosmio G20, it's a little rough.

    It will be very interesting to know than the one you have. Usually, each user should be very gently as it is very sensitive and it is not necessary to put pressure on the TouchPad.

  • Computer HP laptop slim 500 GB HARD drive: used for HP laptop HARD drive upgraded to Win 10 Pro with key now stuck after HP Drive Encryption Login

    I bought a portable hard drive used HP for the upgrade of my Lenovo G550 with ugraded CPU with Intel's CORE DUO T9300 2.50 ghz

    (HP hard drive: computer laptop slim drive HARD 500 GB SERIAL ATA DISK DRIVE S/N W627S9NL P/N 756731-001 MFG Seagate Technologies DOM 8 / 2015)

    I was happy to see that the hatd drive had already installed because Windows 7 I had bought already separate legitimate Windows 10 Pro license key for the upgrade. I was able to go online and download the upgrade of Windows 10 and used my purchased license key to activate my updated.

    While doing the installation, there are some HP software that was still on the hard drive. I thought it would be good to have some additional security protocols, so I also installed the WinMagic Securedoc Bootloader v1.2.12 and saved the drive encryption HP with the security issues and password for secondary access.

    10 Windows has been activated and everything was beautiful. But when I restarted the laptop, I put my password for windows and then it goes to this screen of disc HP encryption rises. I put the password and it is accepted - and then the screen turns white... not offshore... jblank TEU with a cursor flashing that doesbn can't react to inputs.

    I tried leaving it for a day or so and still nothing.  There is nothing I can change in the configuration of the BIOS that works so far.

    I also tried Reimage download on USB and re-creation of the sequence of boot, but not good. Even tried a boot drive, but nothing there either. I'll try again.

    I don't know where to go or how to get beyond the screen of HP encryption.  I am pretty good at following directions, I don't know coding, but may do what you suggest to help me fix this problem.

    Can you help me?

    Sorry... I missed the part that you have a license Win10.  I thought you were trying to activate 10 using the OEM HP license and causing problems.

    I do not use HP encryption applications - as having recently completed a career in the InfoSec, I personally focus together on the encryption of the PC to be laughable-, but my guess is that you are basically out of luck.

    If it was my drive, I WIPE the drive of all its content and then again install Win10.  A good product to do i.e. DBan: http://tiptopsecurity.com/how-to-securely-wipe-your-hard-drive-with-dban-erase-your-data-for-good/

    Once your disc is clean, then simply install Win10 on it.

    That said, with a bit of luck, one of the HP EXPERTS will probably come along and tell you how to get around their encryption.

    Good luck

  • When Windows 8 driver for laptop Satellite C660D - 1 H 2 be available?

    When Windows 8 driver for laptop C660D - 1 H 2 be available?

    Probably when Microsoft offers on the market and when Toshiba start offering equipped laptops of preinstalled Win8.

  • new hard drive for laptop

    I have a laptop dv7-3140el and HD samsung HM641JI 640GB 2.5 "SATA 5400 RPM (to replace car failure). To buy a new hard drive I have to take the same or I can take 7200 RPM instead of 5400? What technical specifications should I look for when buying a hard drive for computer laptop dv7-3140el? I wouldn't make a bad purchase!

    Sorry for my bad English

    Hello

    Here are a few points to note when replacing your HARD drive:

    You are not limited to any particular drive manufacturer.

    The speed of rotation of the disc can be 5400 RPM or 7200 RPM

    The new drive HARD should be at least the same capacity (or slightly more is okay) as the original drive - mounting a drive smaller than the original often causes risks with recovery media.

    The player at the link below is an example of one that would be perfect for your laptop.

    750 GB hard drive for laptop.

    If necessary, the procedure to replace the hard drive begins on Page 47 of your maintenance & Service Guide.

    Kind regards

    DP - K

  • HP 250 J4T46EA: Size of HARD drive for laptop HP 250 J4T46EA

    Hello

    What is the size (thickness in mm) is this laptop HARD drive: HP 250 J4T46EA please?

    I want to buy this notebook with extra SSD to swap with HARD drive and need to know the size.

    Thank you

    Maintenance for HP 250 G3 Guide:

    Manual

    Page 2:

    Supports 6.35 cm (2.5 in.) 9.5 mm hard disks (. 37-in) and thicknesses of 7.0 mm (. 28 - in)

    Most SSDS are broad 7mm thickness 2,5 form factor inches and will fit very well.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HP 15-d005TU Notebook PC: upgrade HARD drive internal for laptop

    The internal HHD is short on free space and I need to replace it with a larger one. The existing one is 500 GB, SATA and 5400 RPM.

    What should I look for when you buy a new?

    Any internal HARD disk will be suitable and compatible or am I looking for something specific?

    Any internal hard drive 2 TB will be suitable and compatible?

    Since the existing one is using a 5400 RPM, one, can I use one with 7200 RPM? There will be compatibility and or overheating problems?

    Thanks for your reply.

    I don't think not laptop 2 TB drives are made with the rotation speed of 7200 RPM. They are all 5400. 7200 TPM is larger than 1 TB. But, to answer your question directly, you can use any 2.5 inch wide and 7mm or 9.5 mm thick hard drive SATA or SSD on the market. The physical dimensions of each of them are the same, that is the industry standard interchangeable. No compatibility or heating problems.

    http://www.Amazon.com/Seagate-laptop-2-5-inch-internal-ST2000LM003/DP/B00MPWYLHO/ref=sr_1_2?ie=UTF8&QID=1455969492&SR=8-2&keywords=2TB+laptop+hard+drive

    See p. 81 of the manual here:

    Manual

    The access door on the bottom does not contain hard drive. Access to the hard drive takes a broad dismantling so be careful. It will jeopardise any warranty you have left.

    Post back with any more questions as the migration of software/resettlement.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Pavilion 9408nr: Add a second drive for another main drive for laptops

    How can I add a second drive for another main drive of laptop computers. I took the car on the same cell type that crashed by the motherboard. I put it in drive Bay 2. Problems with starting. I sometimes want to boot from disc 2. Is there a MBR somewhere? Are there jumpers to make it slave. Sometimes it will install the software on 2 without any question. Is there a way to make a slave?

    Important-copy all data on the second hard drive you want to save on the first hard drive.

    MBR of Windows with the hard drive. Use Windows Explorer to locate the second hard drive. Right-click on it and format it.  Once this done, all what one is a storage device and not bootable until the operating system is installed to it.

    The BIOS will only see the hard drive as a bootable as it will now be the only drive with a MBR boot sector.

    The days of placement of the jumpers to determine master or slave on the disks hard is long gone. SATA drives have no jumpers slave\master like the old school IDE and Eide did.

  • Replacing the hard drive internal for laptop HP Pavilion zv6000

    For a HP Pavilion zv6000 Notebook with WIndows XP, would be a

    HGST Travelstar 2.5 1 TB 7200 tr / MIN SATA 6 GB/s 32 MB Cache internal hard drive

    be a suitable replacement?

    No, I don't think laptop IDE drives were made in sizes more than 500 GB. And the greatest, I see out there in any quantity is a 160 gig. This 320 gig was great, I could find on eBay right now:

    http://www.eBay.com/ITM/WD-Western-Digital-2-5-WD3200BEVE-320G-IDE-PATA-HDD-laptop-internal-hard-drive-/281178825372?PT=US_Internal_Hard_Disk_Drives&hash=item417790629c

  • Driver for PCI devices for laptop HP 2000

    I bought a laptop HP 2000 & installed the windows 7 (32-bit) operating system, but some drivers are not installed.

    The device drivers for other devices: Bluetooth, network, Ethernet, PCI Device and SM Bus controller are not installed.

    I tried to install Atheros Wireless sp63802 & Realtek RTL8188CE 802.11bgn for wireless LAN driver, but no use.

    My laptop computer hardware IDS are:

    Bluetooth:

    PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
    PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
    PCI\VEN_1814 & DEV_3298 & CC_0D1100
    PCI\VEN_1814 & DEV_3298 & CC_0D11

    Ethernet:

    PCI\VEN_10EC & DEV_8136 & SUBSYS_1854103C & REV_05
    PCI\VEN_10EC & DEV_8136 & SUBSYS_1854103C
    PCI\VEN_10EC & DEV_8136 & CC_020000
    PCI\VEN_10EC & DEV_8136 & CC_0200

    Network controller:

    PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
    PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
    PCI\VEN_1814 & DEV_3290 & CC_028000
    PCI\VEN_1814 & DEV_3290 & CC_0280

    PCI device:

    PCI\VEN_10EC & DEV_5229 & SUBSYS_1854103C & REV_01
    PCI\VEN_10EC & DEV_5229 & SUBSYS_1854103C
    PCI\VEN_10EC & DEV_5229 & CC_FF0000
    PCI\VEN_10EC & DEV_5229 & CC_FF00

    PCI Simple Communication controller:

    PCI\VEN_8086 & DEV_1E3A & SUBSYS_1854103C & REV_04
    PCI\VEN_8086 & DEV_1E3A & SUBSYS_1854103C
    PCI\VEN_8086 & DEV_1E3A & CC_078000
    PCI\VEN_8086 & DEV_1E3A & CC_0780

    SM Bus controller:

    PCI\VEN_8086 & DEV_1E22 & SUBSYS_1854103C & REV_04
    PCI\VEN_8086 & DEV_1E22 & SUBSYS_1854103C
    PCI\VEN_8086 & DEV_1E22 & CC_0C0500
    PCI\VEN_8086 & DEV_1E22 & CC_0C05

    Can you please give me the link for these drivers!

    For ethernet

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102604-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

    1. If the network controller is Bluetooth 4.0, then do install this only & decide all BT pilot questions or need to install the driver of BT in the first link also? If install you it and it supports all bluetooth driver problems then the problem is resolved. If it does then install the other driver as well.

    2. for SM Bus controller - how will I know W7x86 / x 64 or W8 x 64 to install? Click the Start button and then right click on computer, then click Properties. See the description of your operating system in the window that says system. It will tell you if the OS is 64 or 32-bit.

    The following image is a virtual hard drive running in my 13 HP spectrum loan which has a 64-bit processor. The Ultimate Windows is a 32-bit version running in VirtualBox.

  • new hard drive for laptop computer tried to install windows XP

    Just fitted new hard drive for laptop computer tried to install windows XP, continues by saying can not find any hard disk. any help would be appreciated

    Hi JohnJelf,

    ·         What is the brand and model of the laptop?

    ·         What is the full error message?

    ·         The new hard drive detected in BIOS?

    I suggest you to contact the manufacturer of the laptop computer for more help and information.

  • Acer aspire 7520 laptop my laptop cannot recognize my driver for cd/dvd drive.

    original title: acer aspire 7520 laptop
    my laptop can not recognize my driver for cd/dvd drive. I have been informed that it is due to the use of vista

    can you help me pls

    Hello

    It would be very improper for any Windows operating system to does not support optical drives, especially if the laptop comes with Vista in the first place. So I'm afraid you've been misinformed. However, this link can help you to solve the problem...

    http://support.Microsoft.com/kb/314060

    Please post back with (a lot) more in detail if you still have questions after looking at the above.

    Tricky

  • Get the Installation failed (-10) for Wireless LAN Driver on Samsung laptop running Windows 7 computer

    I tried to install the update of the driver wireless LAN appears so in SW updates on my Samsung laptop model number NP305E5A that is running Windows 7 (64-bit); and I keep getting error message-10 Installation failure.  I called Samsung and they distance access my computer and tried to install it via the SW update, as well as through websites; and it's the same thing; and they said I need to contact Microsoft as there seems to be some sort of bug on the side of the things Microsoft... Or otherwise I have to do a factory reset my laptop (which I will lose everything I have on my computer - not my first choice of solving this problem)

    The biggest problem with this is that it has disabled the wireless all together, and EVERY time I turn on my computer I have to go into my settings and activate my wireless, and no matter what I do the settings will not stay and I lose connectivity wireless at times.

    Please tell us what to do.

    Download the driver manually for the wireless adapter. (see instructions below)

    Restart in Mode safe mode and uninstall the driver via Device Manager.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Click Start, type: Device Manager

    Press enter on your keyboard

    Expand the network adapters

    Right-click in the map listed wireless, this must be a wireless network Broadcom based card

    Click on uninstall.

    Restart your computer in normal mode.

    Download driver driver for Wireless adapt.

    Go to http://www.samsung.com/us/support/owners/product/NP305E5A-A01US

    Scroll down to the driver tab, and then select your operating system and architecture:

    http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

    After you have selected your architecture, scroll to the bottom of the page and you will see your driver listed:

    Scroll to the right click on the button to download the Zip

    Once downloaded, extract the zip file and then double-click the installer to begin the installation.

    Compress and decompress files ( filezip ) - Windows help

    Tips for fixing common driver problems - Windows help

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • How do I download the driver of fingerprints for laptop models: HP Pavilion

    How do I download the driver of fingerprints for laptop models: HP Pavilion

    You should visit HP support:

    http://support.HP.com/

    Search for your PC model and download the finger print driver.

  • How can I migrate JUST a BONE from a HARD for one SSD drive, by the way, the HARD drive is a laptop and I use the SSD on a new office, I just built.

    I tried to start with my computer desktop laptop HARD drive, which of course, did not work.

    and I can't connect several hard drives or SSD for my laptop, how do I migrate JUST windows 7 and not the rest of my hard drive to my new SSD?

    Install Windows 7 on an SSD will require a "clean install", using your original Windows 7 installation DVD.  Please review: Windows 7 and SSDS: secrets and tweaks of the development of installation

Maybe you are looking for

  • How to remove X 64 compatible ACPI value-added general purpose logical device

    Hello I made a major mistake and installed the update called: TOSHIBA TOSHIBA - other hardware - x 64 compatible ACPI logical value and apparatus for general use I have a X 32 Vista system and it is obviously in conflict with my current setup in a ve

  • Hard drive on my Sam. A30 making strange noises

    Hello. My laptop is Satellite A30 614 with 60 GB. When I do my apps it gives some noise the hard drive and when I copy of documents or install software giving the lost message data. A big problem is until I press F1 my system doesn't boot.Please help

  • cq893a: printing problem

    When printing autocad hollow, it is automatically reversing the artwork of both roll and cut sheets (A4 / A3) not only this cannot be able to center the plot in sizes A4 & A3. I want to check that the problem was printer, PC, drivers and software or

  • default settings?

    I bought a computer laptop used dell d600 latitude, the guy I bought was ssupose send me the windows xp pro disc, but it did, nt on my desk there is a function key that I can use to restore to factory... I'm having a lot of problems with the laptop a

  • How do you write messages in the hub?

    A notification icon at the top works for most use cases, but if we receive messages via our application, how do ensure us than those appearing in the hub, as well as all the other messages?