Touchpad is locked in scroll mode.

Similar Questions

• Qosmio X 300 - 11W - TouchPad does not work in mode 'sleep'

  TouchPad does not work in mode 'sleep'. I can't wake up my computer using a touchpad. I downloaded and installed a driver for Windows 7 32 bit from a page of the Synaptics driver, but it did not help.

  Can you wake up your Qosmio using the power button / stop?
  You close the lid when the laptop enters the sliding mode?
  After you open the laptop lid should wake up. It work correctly?

• my built-in touchpad mouse will not scroll down

  original title: mouse Touchpad

  I was searching in the control panel and uninstall some programs from Microsoft (like a total fool!) and now my built-in touchpad mouse will not scroll down.  I have to use the arrows on the far right of the screen to scroll up and down.  Integrated on my lap top touchpad scroll upwards and down.   Any suggestions?  ASAP please!

  If you have a Dell, I can show you step by step. Options in Dell are not the same as the other makes it necessary.

  In general...
  Right-click on an open office space > Personalize > mouse pointers (Yes! of the mouse pointers) > from here, you will have to consider for theParameters of the Touchpad > if found, click it. Then, search equivalent of 'change settings button scroll '. If found, click it. Then, see if the "Activate " box is DISABLED. If so, check it out > OK

  See screenshot...

  

  t-4-2

• My keyboard and the touchpad are locked, does not respond to what it is.

  My keyboard and the touchpad are locked, do not respond to what it is. I activated the screen keyboard on and it works. It is a G71-340US, Windows 7. I think it happened when the battery died while in a Word doc. computer is turned off. Plugged. Turned, password screen appears, could not type anything in the box. The mouse works. My keyboard and the touchpad are locked, do not respond. Restarted, no help. Pulled the battery, no help. At least I can use the keyboard to the screen!  Thanks for your help.

  Did a restore of the system and all is well! Went back 3 days of the last update of windows. I hope this helps others!

• No scroll mode overview of Muse bar phone

  No scroll mode overview of Muse bar phone

  Hello

  Please see the link following disabled scrollbars in the phone and Tablet

  Kind regards

  Aish

• Why can't I change the data in the table that is locked in SHARE mode?

  Hi gurus,
  
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
  --
  I'm confused by the Oracle locking mechanism, here I'm talking about locking TM. We know that there are several lock TM modes:

  SS
  SX
  S
  SSX
  X

  I have several questions about these modes, for example, the third argument of ', I know S average share, and in my view, table is locked in shared mode, because the people do not want everyone encountering DDL, if this is true, why can't I just run DML against it either? In other words, why does SX and S compatible mode. And S-mode mean?

  SESS#1 SQL> lock table t_lock_4 in share mode;
  
  Table(s) locked
  
  SESS#2 SQL> update t_lock_4 set val='aa' where id=1; --this sql hangs

  Thanks in advance.

  >
  I know S average share, and in my view, table is locked in shared mode, because the people do not want everyone encountering DDL, if this is true, why can't I just run DML against it either? In other words, why does SX and S compatible mode. And S-mode mean?
  >
  The quote from doc tells you which mode S means.
  >
  in my view, table is locked in shared mode, because the people do not want everybody to face DDL, if this is true
  >
  Well - which is not true as says the quote from doc. As the doc says the of ' means "action, table lock" - share the table. If several sessions to share the table any of the sessions can be updated.

  SX and S are not compatible because the of ' is a table lock and "SX" is a line lock. If a session snaps a row then this session MAY update the line even if other sessions have locks on the other lines. Several sessions may lock the different lines and update.

  But as the doc said ' means sharing the table and you can only update it is you're the only session the ' lock.

• Lock and scroll touchpad not working not

  I have a HP G56-130sa, I have a problem with my touchpad, suddenly the lock of the material on the touchpad button has stoped working! When I double click it the lights and lock the touchpad. My gesture of scrolling on the touchpad has also stoped working! What should I do? Thanks in advance

  Try installing the latest software/driver Synaptics. First download and save the driver. Then, go to the dashboard, programs & features and uninstall the Synaptics software. Install the new drivers and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4326263#N508

• How to lock the scroll bar and several tabs to prevent them from scrolling erratically

  I have upgraded to Windows 10.
  Now the fireplace (Yes, it's the latest version) scrolls top down in erratic Web pages.
  I can't control the right scroll bar.
  Even after clicking on it or by moving up and down, either with the use of the touchpad, arrows and arrows at the top / below the scroll bar itself, it moves just everywhere anywhere on the page.
  The same thing occurs when multiple tabs are open. They scroll left and right erratically.
  Help! It's the most boring, frustrating and time consuming.
  I have already searched several forums and blogs, disabled the auto-scrolling and scrolling soft, all to nothing will do.

  On my system, the mouse pad has a mind of its own. So I opened it from the
  settings and OD "disable when mouse available.» No problem now.

• Touchpad randomly locks and won't unlock on Satellite P50 - A

  Don't know if someone can help out me, but I recently bought a P50 - A laptop and I have problems with the touch-pad.

  Basically, what happens is that every now and then my touch-pad locks at random and then allow me to unlock and will unlock once I reset the laptop.

  I checked the drivers and everything seems to work well and there seems to be no hardware conflicts.

  Has anyone else got a happen to them?

  Hello

  Have you noticed this behavior from the first day? You can toggle touchpad (lock/unlock) using F5 (FN + F5)?

• How can I keep the screen locked in portrait mode

  MY gen iPad 3 had a manual lock to keep the screen in portrait or landscape mode. How can I block this function on my cushion of air 2?

  It is on the control center.

  You will have an icon sixth on this line to compensate for the lack of switch.

  

• How can I turn off the beep sound on Num lock, cap lock, and scroll lock keys

  How can I disable the beep on the cap lock NumLock and scroll stop?

  There is a good chance that you can turn off the beeps by pressing the NumLock key for a little more than 5 seconds. Here's where the ToggleKeys setting are stored.

  Go to the Ease of Access Center Control Panel and click make the keyboard easier to use.

  

  Search for Activate the ToggleKeys in the section make it easier to type and uncheck Activate the ToggleKeys. You can uncheck turn on ToggleKeys by pressing the Numlock for 5 seconds more.

  Be sure to click on OK endangered.

  Addendum: more information in the Microsoft Accessability tutorial.

• Cannot find the Touchpad settings to allow scrolling. Touchpad are not not as a device under the mouse settings. Help.

  I usually use a USB mouse, as it is easier for me than a touchpad, but mine a. kaput! So, now I'm trying to use my touchpad and I can't scroll. It has arrows on the right side and it used to make scroll... but now it doesn't. I do not remember turning this setting OFF... but when I try to see if there is a setting I can change I can not even find the Touchpad as a device. When I go into the properties of the mouse, I get a message "unable to connect to the Synaptics pointing device driver. I thought you could say that because I unplugged the USB mouse, but now I'm not sure.

  When I go to the mouse, then material he mentions "Synaptics PS/2 Port Pointing Device. It says plugged in the mouse PS/2 port and the device works correctly. There is no devices listed under device settings. In addition, there is an option to display the icon in the taskbar (it used to be there... don't know what happened) but I can't click on it or the other tray icon options.

  I have a Gateway M152s laptop. Any suggestions? Reinstall a driver or something?

  Help is greatly appreciated!

  Thank you!!!

  Hello

  Check with the Gateyway support, documentation in line, or forums that there is probably Hotkeys
  that enable and disable the touchpad functions.

  Gateway drivers and downloads.
  http://support.gateway.com/support/drivers/dlcenter.asp

  Also check the control - Mouse - touchpad settings panel.

  You can also try this:

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL. Even if the touch pad is not displayed, do the rest.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific device
  If it is present.
  http://support.Microsoft.com/kb/310575

  Then navigate to the site of the manufacturer of the system (gateway downloads - access your model - listed above) and down
  the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ================================================

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• App lock in portrait mode?

  Does anyone know what I need to adjust the settings in my app to lock the application by default of portrait, fashion, rather than landscape?  I have a game that is designed for portrait mode, and I can't understand how to take advantage of this mode.

  Any help that anyone can suggest would be very appreciated!

  In your app.xml file, use the 'false' and 'portrait'. See http://www.adobe.com/devnet/flash/articles/screen_orientation_apis.html

• ZV5000 needs drivers touchpad with tap and scroll

  Hello! I just reinstalled XP on a HP ZV5000 laptop. The driver has been installed for the touchpad ALPS does not support tapping or scroll functions. The installed version is 1.00 as indicated on the downloads for this model, but this driver only supports the basic functions of touchpad and has no specific settings available in the section of the control panel mouse. Before the reinstall press the keys and scrolling features worked well and had specific touchpad settings. Can someone tell me please the good driver that supports these functions. Thank you!

  Hello:

  Please see if this driver does what you want it to do.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-79212-1&prodTypeId=321957&prodSeriesId=3688868

  Paul

• Touchpad stop going into hibernation mode. transfer of the apps

  Hey all, I just got my Touchpad a week ago and I used to power press and hold the power button and he'd jump a menu to stop the machine, but that stopped working? Now when I hold the power button, it will just in hibernation mode. I have to go into settings, info on the device, etc. to shut it down. I was wondering if anyone else has had this problem? I think the Exchange I have 14 days, but I then buy all the apps I bought? Not a happy camper right now...

  Make a post on this forum

  http://forums.Palm.com/