ZV5000 needs drivers touchpad with tap and scroll

Hello! I just reinstalled XP on a HP ZV5000 laptop. The driver has been installed for the touchpad ALPS does not support tapping or scroll functions. The installed version is 1.00 as indicated on the downloads for this model, but this driver only supports the basic functions of touchpad and has no specific settings available in the section of the control panel mouse. Before the reinstall press the keys and scrolling features worked well and had specific touchpad settings. Can someone tell me please the good driver that supports these functions. Thank you!

Hello:

Please see if this driver does what you want it to do.

http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-79212-1&prodTypeId=321957&prodSeriesId=3688868

Paul

Tags: Notebooks

Similar Questions

  • Problems with clicking and scrolling when you are using the mouse in IE

    Separated from this thread.

    Original title:

    Problems with clicking and scrolling when you are using the mouse

    I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

    Hello Fred,.

    Thanks for the reply.

    I appreciate your efforts to resolve the issue.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the hardware and devices Troubleshooter and check. Please follow these steps:

    a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
    b. click on 'show all' and then click 'hardware and devices'.
    c. click 'Next' and then follow the on-screen instructions.

    If this does not help, then use method 2.

    Method 2:
    Start your computer in safe mode and check the number.
    Refer to this article:
    Start settings for Windows (including safe mode)
    http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Satellite A200-1 g (PSAECE) Win XP. Need drivers for SATA HDD and GeForce 7300

    Hi all.
    I would install XP instead of Vista on my note. As far as I know, XP has no builtin for SATA driver. I found no drivers for GeForce 7300 on the toshiba Web site. So I need drivers for SATA HDD and GeForce 7300. Where can I find them?
    Thank you.

    Hello

    Why must you SATA XP drivers? You are not able to install XP because the HARD drive is not visible?

    With regard to the nVidia drivers:
    It seems that the A200 notebooks were shipped with a different hardware configuration.
    Some laptops come with the Intel GPU and some with nVidia graphics card.
    The Intel GPU driver is available on the Toshiba page.

    Graphic driver nVidia can be downloaded from the site Web of Toshiba Canada or 3rd sites like www.omegadrivers.net or www.laptopvideo2go.com

    See you soon

  • Need drivers for Lan, sound and PCI for Satellite A105-s4074

    I need drivers for LAN, PCI and its for satellite A105-s4074.

    Thank you

    I put t know what operating system you are using, but you should find the drivers for this laptop on the page of the Toshiba driver we.

    Satellite A105-s4074 was designed for the American market, and therefore, you should use this page:
    http://www.toshibadirect.com/TD/B2C/home.to

    Best regards

  • Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and IMAQ Cheers acquisition image vision module

    Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and image acquisition IMAQCheers vision module

    Hi, I use a 1.4MP USB camera with LabView. The brand is ID - a German company.

  • Acer Aspire 5745PG, I need drivers for XP, how and where to get them?

    Hello

    I recently had to install my OS XP on my Acer Aspire 5745PG, so I can use some of my old software for PLC control without having to pay mega bucks a newer version of the software.

    Now, my problem is that I can't find the drivers of Windows XP.

    When I go here:

    http://us.Acer.com/AC/en/us/content/drivers

    and enter in the model are all I can download x 64-bit of Windows 7 drivers.

    There is nothing much in the way of specifics as to what are the models of camera to the laptop so I can not find drivers for what I don't know.  For example: for the LAN driver, everything he says is Atheros LAN but no model specific and for Wireless LAN its either Atheros or Broadcom and VGA 3 registered there but for Win7x64 my laptop has Nvidia 330 M graphics card and the sound card is listed as a Realtek but which models are all these?

    Need help to get drivers Windows XP for my Acer Aspire 5745PG

    I did a bit of looking around after having tried the drivers that came with the pack of drivers and finding that they did not.  Apparently, the new versions of the drivers do not work for LAN and WLAN.  I got these 2 drivers finally work properly.

    The network driver I installed that seems to work well with XP is l1c51 v1.0.0.33 - whql.

    The best WLAN Driver that seems to work well with XP it's xp3264 v9.2.0.104 - whql v10 of these drivers do not work.

    We thank all those who tried to help.

  • Problem with onFocus and scrolling

    I have a table built with a VerticalFieldManager and have implemented the standard shortcut scrolling. There was a problem where the onFocus event has not fired on my table cells when 'b', 't', 'space' shortcut keys have been used (though even the focus change). I had to add the fireFocusHack() to fix. I wonder if it isn't something I am doing wrong or is this a bug of BB OS? It works without the hack in the simulator of 8330 I use JDE 4.5. The notch is necessary on a Bold 9700 running 5.0 and a 4.6 running curve.

        public boolean keyChar( char c, int status, int time ) {
    
            if (tableCellHasFocus()) {            Field f;            switch( c ) {                case Characters.SPACE:                    if ((status & KeypadListener.STATUS_SHIFT) == 0) {                        scroll( Manager.DOWNWARD );                    } else {                        scroll( Manager.UPWARD );                    }                    fireFocusHack();                    return true;                case 't':                    scroll( Manager.TOPMOST );                    fireFocusHack();                    return true;                case 'b':                    scroll( Manager.BOTTOMMOST );                    fireFocusHack();                    return true;            }        }
    
            return super.keyChar(c, status, time);    }
    
        private void fireFocusHack() {        Field f = table.getFieldWithFocus();        if(f instanceof MessageCell) {            MessageCell tc = (MessageCell)table.getFieldWithFocus();            tc.setFocusHack();        }    }
    
    public class MessageCell {
    
       ....
    
        public void setFocusHack() {        onFocus(0);    }...}
    

    I found this one. Table cells were VerticalFieldManagers which contained a focusable RichTextField. It was my onFocus() and onUnfocus() methods were on optimizing resources aren't the RichTextField. The funny thing is that it has worked well for manual/trackball scrolling.

  • Re: Satellite L750D - touchpad turns on and off by itself

    Hello

    I have two cell phones L750d one of them works fine but the other is the touchpad with disable and enable himself every second or so, tried touchpad update drivers, tried to take out the battery and pressing the power on button for 30 seconds and a few other options that people talk in the forums. So far, nothing has worked and the touchpad can still turn itself on and off itself.

    Any help at all will be greatly appreciated as it is driving my crazy wife and she is constantly using my laptop which is driving me crazy.

    You can completely disable using FN + F8 key combination?
    Are you using the original pre-installed OS that you got with your laptop?

  • Need drivers for Satellite 1000-Z2

    I have a Satellite S1000-Z2 (aka PS100E-001RE-EN) - number of complete product C1133/256/15/14XT/D/M

    I don't have the original CD that came with the laptop, and I had to replace the hard drive. I loaded a version OEM of Windows XP by using the key number on the bottom of the laptop, and which has been loaded OK.

    However, there are 3 devices I need drivers for the modem and 2 graphics drivers (Intel I think). I can't find THE drivers on the Toshiba site.

    In addition, there is a port of network at the rear of the machine. It does not show in the Device Manager to all, and I don't find it in BIOS to see if it is enabled or disabled.

    If anyone can offer any assistance, I would be very grateful.

    Thank you.

    All the drivers, that you can find in the ARCHIVES. Check it out!

  • Need drivers for my Satellite M30

    My M30 ran slow and boring and carrying a bunch of old garbage files so I decided to reinstall Windows XP Media Center and replace all previous data - not upgraded. Now, I'm trying to find the drivers for it.

    Got the screen those but the network controller seems to be hard to get and install the required software. There is also an unknown device in Device Manager that requires drivers apparently but I na? t know what it is. Got the controller network and Modem left - but never use the modem, so just looking for the network controller.
    He said: I need a software with it and it can not find the software? Help!

    Josh

    Hello

    Usually the Toshiba laptop came with a recovery Cd and a CD of drivers & tools.
    On this site you should find the drivers for Windows XP.
    The WinXP MCE should use the same drivers.
    I recommend you test drivers. In addition, you can also download and install the drivers for the Toshiba driver page:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    However, check this driver and install it in the right order.
    Installing the chipset utility that should be done first is very important.
    Check it out.

  • Satellite Pro U200 - need drivers HDD Protection & footprint of VISTA 64-bit

    I have toshiba Satellite Pro U200 [Greece] and I need drivers for fingerprint utility and disk protection hard can you help me? It is very important too me.

    I think that gives you about boyfriend chance seems Toshiba 64-bit tools and drivers at the moment unfortunately, nothing to see :(

  • Create the image with black and white patterns

    Hello

    With the attached VI I am able to create an image that is completely black (or white or any color according to values in the color palette). See picture1.

    Is it possible to create an image as photo 2 and photo 3 or any other form which consists of black and white patterns? I need an image with black and white areas that a camera can recognize.

    Thanks for any help.


  • I can say and scrolling with touchpad can not zoom in

    Samsung notebook PC series, can point and scroll with the touchpad, cannot zoom or turn

    Hello Shelly,

    1. don't you make changes to the computer before this problem?

    2. is the question confined to the touchpad?

    3. you download and install the drivers of more recent and up-to-date touchpad on the site Web of the manufacturer?

    Follow these methods.

    Method 1.

    This tutorial is designed to help you identify and fix the mouse, touchpad and keyboard problems in Windows.

    Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

    Method 2.

    Steps to zoom.

    1 - Place two fingers on your touch pad about an inch of distance.

    2. slide your fingers on the other while maintaining contact with the surface of the touch pad. The window will zoom in.

    3-lift your fingers off the coast of the touch pad when you have reached your desired magnification.

    Steps to zoom out.

    4 - Place two fingers on the touch pad to maximum distance each.

    5. slide your fingers closer together while keeping in contact with the touchpad. The window will zoom out.

    6-lift your fingers off the coast of the touch pad when you have reached your desired result.

    Method 3.

    Press "Ctrl + Alt + right arrow" to rotate the screen and touchpad 90 degrees.

    Press 'Ctrl + Alt + arrow up' to reverse back to normal.

    Let us know if you need assistance with any Windows problem. We will be happy to help you.

  • [Pavilion g6 Win7 64 bit] SM Bus controller and drivers Touchpad

    Hello, after scouring the forum I managed to find my drivers but for the SM Bus controller.

    This is the ID of the hardware for the SM Bus controller:

    PCI\VEN_1022 & DEV_780B & SUBSYS_1849103C & REV_14

    PCI\VEN_1022 & DEV_780B & SUBSYS_1849103C
    PCI\VEN_1022 & DEV_780B & CC_0C0500
    PCI\VEN_1022 & DEV_780B & CC_0C05

    Please note that I am on a g6 Pavilion which I downgraded to Windows 7 64 bit.

    My other question, which seems to be linked to drivers, is that I can't turn off my touchpad or use it to its full extent. I want to do that while I use my usb mouse, because it makes typing messy when I accidentally touch the touchpad. Normally I would be able to double tap the top left of the touchpad where there is a dash, and it will close or turn on, but since the downgrade I have not been able to do.

    Thank you for your time.

    Hello:

    The only suggestion I can offer about the touchpad if you already tried the socket driver in charge of your laptop and driver page would be to try that one directly from Synaptics.

    http://www.Synaptics.com/en/drivers.php

    The smbus controller, I can certainly help you with...

    Here's what I did... I have zipped and attached below in attachments, the raw smbus controller driver files to decompress and install manually.

    Download and unzip the file.

    Go to Device Manager and click the controller smbus needing drivers.  Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

    Make sure that the include subfolders is selected and the driver should install.  Then restart.

  • [T420i] Question option Touchpad ' tap and go '.

    Hey guys,.

    I have a problem regarding a specific touchpad settings which always resets automatically after restart. I don't speak of the possibility of scrolling or moving objects with just a tap - I think that this option is called "tap and continue." To keep focus on the selected object you want for a quarter, it is necessary to draw again.

    Painfully, this behavior is not present after a reboot and I mind setting up again and again. I hope you know a solution for this problem.

    Best, Benjamin

    Hi, Benjamin

    You can try to install the latest UltraNav driver and see if that helps your question. The latest driver is the 16.2.19.2 version and can be found here.

    It will be useful,

    Adam

Maybe you are looking for

  • Ethernet for Equium A100-027 necessary driver

    Hi quick question, just formatted the hard drive of my Equium after problems, has lost a lot of pilots, but everything is ok now but one.I have the missing in Device Manager Ethernet controller driver. Its running Vista. The question is what do I hav

  • Bayer U16 2D table

    Hello I use a pilot of the custom camera that gives me image data as Bayer formed in a U16 2D table data. I wonder if I can use the function "IMAQ Bayer to RGB" with it. I would be very grateful for the advice. Thank you D. Ackermann

  • Dialog control stamp kills system Exec.vi!

    Hello! I have just a really strange behavior in my application. I managed to narrow it down to a much smaller VI, please don't look at the framework, but the real problem, this test of the vi MAIN looks like this because it's a skeleton of an applica

  • Is WLC 4402 - possible to get one of the ports to work at 100 MB?

    I bought the controller with 2 gigabit ethernet GBIC 4402 wireless. However, the switch of that I connect to the port is only 10/100. Is there anyway to get the controller ports to talk to 100 instead of 1000 mb? Would buy a 100BaseT instead of a tip

  • Facebook api

    How to add facebook api for my application? give me the code and the step by step program?