Touchpad is not properly after upgrading to Windows 7

Similar Questions

• Touchpad does not work after upgrade to Windows 8

  Hello

  I have just upgraded to Windows 8 with my HP Pavilion G6, and since then my Touch Pad stop working.

  Although the scrollbar on the right to work, but the work of the stop scrolling 2 fingers. Pls what can I do?

  oyedepo1,

  If you need drivers from the drivers from your computer's Web pages:

  Install the software and drivers from the HP site

  Driver for the TouchPad, if you need a new, is in the category

  Software-Solutions > > driver - keyboard, mouse and input devices

  See this file for more information:

  Difficult Touchpad / ClickPad

  Display brilliant tips

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• Z410 Touchpad does not work after upgrade to Windows 10

  Hello

  I have the Z410 (2 years) and since the upgrade to Windows 10, the TouchPad does not work!

  • I updated the driver with no luck to make it work.
  • Solutions used Lenovo Center, digitised material and nothing shows a hardware or driver missing.
  • In Device Manager it shows any missing material.
  • Settings > devices > mouse & Touchpad... The touchpad tab shows her where this versioned (Alps Touch Pad - 8.201.1611.252)

  Any tips?

  
  

• Satellite C50D-B - 12 c - TouchPad does not work after upgrade to Windows 10

  Can someone suggest a solution to get the touchpad working again after windows 10 upgeade?

  You may need to remove / uninstall the preinstalled software touchpad control panel → programs & features.

  After this reboot of the laptop.

• Second monitor is not detected after upgrade to Windows 10

  After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

  I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

  Hello

  I upgraded the PC host, but also virtual machines to Windows Pro 10.

  TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

  Is this a known issue?

  Thank you!

  Kind regards

  Joe

  SOLVED!

  
  

  I uninstalled VMware Player, including the abolition of the configuration files.

  
  

  re-installed VMware Player and it worked!

• Output HDMI not working not not for Dell XPS L502X does not work after upgrade to Windows 10

  Hi all

  Good so I have this laptop Dell XPS L502X that I bought in 2012. The laptop provided with Microsoft Windows 7 Home Edition.

  His output HDMI for my Sony LED used previously to work properly.

  But there are a few months that those offered by Microsoft, I upgraded my OS from Windows 7 Home edition to Windows Home Edition 10 laptop.  Since the upgrade, everything worked fine except I don't get HDMI output to my TV.

  I tried to search for solutions online but do not know what could be the problem? Can someone guide me in the right direction please?

  Thank you.

  I am happy to update this thread, the problem of my laptop screen is displayed using HDMI on my Sony TV, solved on its own with the last update for Windows 10 which includes the OS 1607 version build: 14393.187

  To all of you who always fights for the configuration of HDMI output for their laptop to the television after upgrade to Windows 10, I'm sure that the last Windows Update will solve the problem.

• Acer Aspire M5-481TG - card reader does not work after upgrade to Windows 10

  Hey!

  I can't get my card reader works after upgrade to windows 10 64-bit...

  Device Manager gives me return error Code 48, tried to install different drivers, I have found for Realtek PCIE Card Reader... None of them work...

  "Code 48: the software for this device has been blocked from starting because it is known to have problems with Windows.

  Have you ever tried the Realtek website?

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  Please uninstall the driver installed before installing this, on right click Device Manager, choose uninstall, and check the box uninstall the software too.

• P5T15EA #ABU: (off mic and dim) function keys do not work after upgrade to Windows 10

  Hello

  After the upgrade to Windows 10, as dim and mic power function keys have stopped working. I installed all the drivers, and there is no unknown device in System Manager.

  How can I solve this problem?

  Model:

  HP ProBook 440 G3

  P5T15EA #ABU

  Hello Horiz0n,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I understand that the function keys do not properly function on your laptop.

  Please use the link below to install the driver hotkey support to solve the problem.

  FTP://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73347.exe

  If you need to know more information refer to this Document ID: c04898039.

  Hope that answers your query.

  If you have any questions please reply back to me.

  Have a great day!

• DeskJet 1050 - J410a: HP Deskjet 1050 does not print after upgrade of Windows 10

  Dear forum,

  I recently upgraded my HP Windows OS 8.1 for Windows 10 desktop computer. My deskjet 1050 printer, which worked fine before the upgrade, does not properly more print after the upgrade.

  I used HP Print and Scan Doctor several times, indicating no any problems. I am able to scan documents, the question is limited to printing. I also deleted and reinstalled the drivers at least 2 times (and restarted all systems on a regular basis).

  • A "test print" works very well.
  • When I print a PDF from the edge, the printer creates output but not good quality.
  • When I print an office word document, pages came out empty.

  3 cases have a common behavior, whenever I get an error message. "Morning maken puts printer niet mogelijk. Duch is for "cannot connect to the printer.".

  Do you have any tips for me?

  With sincere friendships.

  Pieter

  HeyPieter_Belgium

  Welcome to the HP Forums, I'd love to help you with printing problems you encounter. Although I am not sure what is cause of the error of communication, or of poor quality, I suspect it has something to with the pilot and the recent upgrade. I suggest to uninstall the software, remove the Chuck from the properties of the server, and then put it back using the printer Installation Wizard. I will list the links and instructions below to help you in each of these steps.

  HP printers - uninstalling the software of the printer (Windows)

  Remove the driver from the print server properties:

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Download and run the Installation Wizard for printer: www.HP.com/go/Tools 

  If this solves the problem, please indicate your post as solved by clicking on the accept button Solution below. If you need help, let me know!

  Thank you.

• Multifunction HP LaserJet 1536dnf printers: Scanner function not accessible after upgrade to Windows 10

  Function non-contactable on printers MFP HP LaserJet 1536dnf of analysis after the upgrade to Windows 10.

  Here is the error message:

  

  I recycled the printer... inaccessible even

  I recycled the router and the printer... inaccessible even

  Worked fine before with Norton and Windows Firewall enabled on Windows 7.  so...

  I have disabled the Windows Firewall (but not Norton firewall)... inaccessible even

  I ran "SCF/scannow' with the command prompt... inaccessible even

  I ran HP Print doctor who says that the scanning software was not installed.

  I tried to download and install the software the complete solution... masse not installed properly... even inaccessible.

  Help, please

  HALLALUJAH!  Now, I can scan, fax and print.  I did not follow the directions of RnRMusicMan together.  I just deleted all the HP software that had to do with print and then installed the suggested software.  I do not close the firewall or do any of the other suggestions.  Other people with the same problem may have to follow all the indications made by RnRMusicMan above.  RnRMusicMan, THANK YOU for giving me the link for the correct HP software to solve the problem, HP LaserJet full feature software and driver.   Without your help, I would have not a scanner works on this printer.  I scan most all instead of filing paper.  I was in trouble when the sweep would not work. ... HP support is GREAT!

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG